Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

42 files changed, 4282 insertions, 0 deletions

diff --git a/Documentation/ABI/stable/firewire-cdev b/Documentation/ABI/stable/firewire-cdev
new file mode 100644
index 000000000..261f85b13
--- /dev/null
+++ b/Documentation/ABI/stable/firewire-cdev
@@ -0,0 +1,111 @@
+What:		/dev/fw[0-9]+
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+		The character device files /dev/fw* are the interface between
+		firewire-core and IEEE 1394 device drivers implemented in
+		userspace.  The ioctl(2)- and read(2)-based ABI is defined and
+		documented in <linux/firewire-cdev.h>.
+
+		This ABI offers most of the features which firewire-core also
+		exposes to kernelspace IEEE 1394 drivers.
+
+		Each /dev/fw* is associated with one IEEE 1394 node, which can
+		be remote or local nodes.  Operations on a /dev/fw* file have
+		different scope:
+
+		  - The 1394 node which is associated with the file:
+
+			  - Asynchronous request transmission
+			  - Get the Configuration ROM
+			  - Query node ID
+			  - Query maximum speed of the path between this node
+			    and local node
+
+		  - The 1394 bus (i.e. "card") to which the node is attached to:
+
+			  - Isochronous stream transmission and reception
+			  - Asynchronous stream transmission and reception
+			  - Asynchronous broadcast request transmission
+			  - PHY packet transmission and reception
+			  - Allocate, reallocate, deallocate isochronous
+			    resources (channels, bandwidth) at the bus's IRM
+			  - Query node IDs of local node, root node, IRM, bus
+			    manager
+			  - Query cycle time
+			  - Bus reset initiation, bus reset event reception
+
+		  - All 1394 buses:
+
+			  - Allocation of IEEE 1212 address ranges on the local
+			    link layers, reception of inbound requests to such
+			    an address range, asynchronous response transmission
+			    to inbound requests
+			  - Addition of descriptors or directories to the local
+			    nodes' Configuration ROM
+
+		Due to the different scope of operations and in order to let
+		userland implement different access permission models, some
+		operations are restricted to /dev/fw* files that are associated
+		with a local node:
+
+			  - Addition of descriptors or directories to the local
+			    nodes' Configuration ROM
+			  - PHY packet transmission and reception
+
+		A /dev/fw* file remains associated with one particular node
+		during its entire life time.  Bus topology changes, and hence
+		node ID changes, are tracked by firewire-core.  ABI users do not
+		need to be aware of topology.
+
+		The following file operations are supported:
+
+		open(2)
+		    Currently the only useful flags are O_RDWR.
+
+		ioctl(2)
+		    Initiate various actions.  Some take immediate effect, others
+		    are performed asynchronously while or after the ioctl returns.
+		    See the inline documentation in <linux/firewire-cdev.h> for
+		    descriptions of all ioctls.
+
+		poll(2), select(2), epoll_wait(2) etc.
+		    Watch for events to become available to be read.
+
+		read(2)
+		    Receive various events.  There are solicited events like
+		    outbound asynchronous transaction completion or isochronous
+		    buffer completion, and unsolicited events such as bus resets,
+		    request reception, or PHY packet reception.  Always use a read
+		    buffer which is large enough to receive the largest event that
+		    could ever arrive.  See <linux/firewire-cdev.h> for descriptions
+		    of all event types and for which ioctls affect reception of
+		    events.
+
+		mmap(2)
+		    Allocate a DMA buffer for isochronous reception or transmission
+		    and map it into the process address space.  The arguments should
+		    be used as follows:  addr = NULL, length = the desired buffer
+		    size, i.e. number of packets times size of largest packet,
+		    prot = at least PROT_READ for reception and at least PROT_WRITE
+		    for transmission, flags = MAP_SHARED, fd = the handle to the
+		    /dev/fw*, offset = 0.
+
+		Isochronous reception works in packet-per-buffer fashion except
+		for multichannel reception which works in buffer-fill mode.
+
+		munmap(2)
+		    Unmap the isochronous I/O buffer from the process address space.
+
+		close(2)
+		    Besides stopping and freeing I/O contexts that were associated
+		    with the file descriptor, back out any changes to the local
+		    nodes' Configuration ROM.  Deallocate isochronous channels and
+		    bandwidth at the IRM that were marked for kernel-assisted
+		    re- and deallocation.
+
+Users:		libraw1394;
+		libdc1394;
+		libhinawa;
+		tools like linux-firewire-utils, fwhack, ...
diff --git a/Documentation/ABI/stable/o2cb b/Documentation/ABI/stable/o2cb
new file mode 100644
index 000000000..5eb1545e0
--- /dev/null
+++ b/Documentation/ABI/stable/o2cb
@@ -0,0 +1,10 @@
+What:		/sys/fs/o2cb/ (was /sys/o2cb)
+Date:		Dec 2005
+KernelVersion:	2.6.16
+Contact:	ocfs2-devel@oss.oracle.com
+Description:	Ocfs2-tools looks at 'interface-revision' for versioning
+		information. Each logmask/ file controls a set of debug prints
+		and can be written into with the strings "allow", "deny", or
+		"off". Reading the file returns the current state.
+Users:		ocfs2-tools. It's sufficient to mail proposed changes to
+		ocfs2-devel@oss.oracle.com.
diff --git a/Documentation/ABI/stable/syscalls b/Documentation/ABI/stable/syscalls
new file mode 100644
index 000000000..c3ae3e7d6
--- /dev/null
+++ b/Documentation/ABI/stable/syscalls
@@ -0,0 +1,10 @@
+What:		The kernel syscall interface
+Description:
+	This interface matches much of the POSIX interface and is based
+	on it and other Unix based interfaces.  It will only be added to
+	over time, and not have things removed from it.
+
+	Note that this interface is different for every architecture
+	that Linux supports.  Please see the architecture-specific
+	documentation for details on the syscall numbers that are to be
+	mapped to each syscall.
diff --git a/Documentation/ABI/stable/sysfs-acpi-pmprofile b/Documentation/ABI/stable/sysfs-acpi-pmprofile
new file mode 100644
index 000000000..2d6314f0e
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-acpi-pmprofile
@@ -0,0 +1,26 @@
+What:		/sys/firmware/acpi/pm_profile
+Date:		03-Nov-2011
+KernelVersion:	v3.2
+Contact:	linux-acpi@vger.kernel.org
+Description:	The ACPI pm_profile sysfs interface exports the platform
+		power management (and performance) requirement expectations
+		as provided by BIOS. The integer value is directly passed as
+		retrieved from the FADT ACPI table.
+
+Values:	        For possible values see ACPI specification:
+		5.2.9 Fixed ACPI Description Table (FADT)
+		Field: Preferred_PM_Profile
+
+		Currently these values are defined by spec:
+
+		== =================
+		0  Unspecified
+		1  Desktop
+		2  Mobile
+		3  Workstation
+		4  Enterprise Server
+		5  SOHO Server
+		6  Appliance PC
+		7  Performance Server
+		>7 Reserved
+		== =================
diff --git a/Documentation/ABI/stable/sysfs-bus-firewire b/Documentation/ABI/stable/sysfs-bus-firewire
new file mode 100644
index 000000000..9ac9eddb8
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-firewire
@@ -0,0 +1,136 @@
+What:		/sys/bus/firewire/devices/fw[0-9]+/
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+		IEEE 1394 node device attributes.
+		Read-only.  Mutable during the node device's lifetime.
+		See IEEE 1212 for semantic definitions.
+
+		config_rom
+			Contents of the Configuration ROM register.
+			Binary attribute; an array of host-endian u32.
+
+		guid
+			The node's EUI-64 in the bus information block of
+			Configuration ROM.
+			Hexadecimal string representation of an u64.
+
+
+What:		/sys/bus/firewire/devices/fw[0-9]+/units
+Date:		June 2009
+KernelVersion:	2.6.31
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+		IEEE 1394 node device attribute.
+		Read-only.  Mutable during the node device's lifetime.
+		See IEEE 1212 for semantic definitions.
+
+		units
+			Summary of all units present in an IEEE 1394 node.
+			Contains space-separated tuples of specifier_id and
+			version of each unit present in the node.  Specifier_id
+			and version are hexadecimal string representations of
+			u24 of the respective unit directory entries.
+			Specifier_id and version within each tuple are separated
+			by a colon.
+
+Users:		udev rules to set ownership and access permissions or ACLs of
+		/dev/fw[0-9]+ character device files
+
+
+What:		/sys/bus/firewire/devices/fw[0-9]+/is_local
+Date:		July 2012
+KernelVersion:	3.6
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+		IEEE 1394 node device attribute.
+		Read-only and immutable.
+Values:		1: The sysfs entry represents a local node (a controller card).
+
+		0: The sysfs entry represents a remote node.
+
+
+What:		/sys/bus/firewire/devices/fw[0-9]+[.][0-9]+/
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+		IEEE 1394 unit device attributes.
+		Read-only.  Immutable during the unit device's lifetime.
+		See IEEE 1212 for semantic definitions.
+
+		modalias
+			Same as MODALIAS in the uevent at device creation.
+
+		rom_index
+			Offset of the unit directory within the parent device's
+			(node device's) Configuration ROM, in quadlets.
+			Decimal string representation.
+
+
+What:		/sys/bus/firewire/devices/*/
+Date:		May 2007
+KernelVersion:	2.6.22
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+		Attributes common to IEEE 1394 node devices and unit devices.
+		Read-only.  Mutable during the node device's lifetime.
+		Immutable during the unit device's lifetime.
+		See IEEE 1212 for semantic definitions.
+
+		These attributes are only created if the root directory of an
+		IEEE 1394 node or the unit directory of an IEEE 1394 unit
+		actually contains according entries.
+
+		hardware_version
+			Hexadecimal string representation of an u24.
+
+		hardware_version_name
+			Contents of a respective textual descriptor leaf.
+
+		model
+			Hexadecimal string representation of an u24.
+
+		model_name
+			Contents of a respective textual descriptor leaf.
+
+		specifier_id
+			Hexadecimal string representation of an u24.
+			Mandatory in unit directories according to IEEE 1212.
+
+		vendor
+			Hexadecimal string representation of an u24.
+			Mandatory in the root directory according to IEEE 1212.
+
+		vendor_name
+			Contents of a respective textual descriptor leaf.
+
+		version
+			Hexadecimal string representation of an u24.
+			Mandatory in unit directories according to IEEE 1212.
+
+
+What:		/sys/bus/firewire/drivers/sbp2/fw*/host*/target*/*:*:*:*/ieee1394_id
+		formerly
+		/sys/bus/ieee1394/drivers/sbp2/fw*/host*/target*/*:*:*:*/ieee1394_id
+Date:		Feb 2004
+KernelVersion:	2.6.4
+Contact:	linux1394-devel@lists.sourceforge.net
+Description:
+		SCSI target port identifier and logical unit identifier of a
+		logical unit of an SBP-2 target.  The identifiers are specified
+		in SAM-2...SAM-4 annex A.  They are persistent and world-wide
+		unique properties the SBP-2 attached target.
+
+		Read-only attribute, immutable during the target's lifetime.
+		Format, as exposed by firewire-sbp2 since 2.6.22, May 2007:
+		Colon-separated hexadecimal string representations of
+
+			u64 EUI-64 : u24 directory_ID : u16 LUN
+
+		without 0x prefixes, without whitespace.  The former sbp2 driver
+		(removed in 2.6.37 after being superseded by firewire-sbp2) used
+		a somewhat shorter format which was not as close to SAM.
+
+Users:		udev rules to create /dev/disk/by-id/ symlinks
diff --git a/Documentation/ABI/stable/sysfs-bus-mhi b/Documentation/ABI/stable/sysfs-bus-mhi
new file mode 100644
index 000000000..ecfe7662f
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-mhi
@@ -0,0 +1,21 @@
+What:		/sys/bus/mhi/devices/.../serialnumber
+Date:		Sept 2020
+KernelVersion:	5.10
+Contact:	Bhaumik Bhatt <bbhatt@codeaurora.org>
+Description:	The file holds the serial number of the client device obtained
+		using a BHI (Boot Host Interface) register read after at least
+		one attempt to power up the device has been done. If read
+		without having the device power on at least once, the file will
+		read all 0's.
+Users:		Any userspace application or clients interested in device info.
+
+What:		/sys/bus/mhi/devices/.../oem_pk_hash
+Date:		Sept 2020
+KernelVersion:	5.10
+Contact:	Bhaumik Bhatt <bbhatt@codeaurora.org>
+Description:	The file holds the OEM PK Hash value of the endpoint device
+		obtained using a BHI (Boot Host Interface) register read after
+		at least one attempt to power up the device has been done. If
+		read without having the device power on at least once, the file
+		will read all 0's.
+Users:		Any userspace application or clients interested in device info.
diff --git a/Documentation/ABI/stable/sysfs-bus-nvmem b/Documentation/ABI/stable/sysfs-bus-nvmem
new file mode 100644
index 000000000..c399323f3
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-nvmem
@@ -0,0 +1,22 @@
+What:		/sys/bus/nvmem/devices/.../nvmem
+Date:		July 2015
+KernelVersion:  4.2
+Contact:	Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+Description:
+		This file allows user to read/write the raw NVMEM contents.
+		Permissions for write to this file depends on the nvmem
+		provider configuration.
+		Note: This file is only present if CONFIG_NVMEM_SYSFS
+		is enabled
+
+		ex::
+
+		  hexdump /sys/bus/nvmem/devices/qfprom0/nvmem
+
+		  0000000 0000 0000 0000 0000 0000 0000 0000 0000
+		  *
+		  00000a0 db10 2240 0000 e000 0c00 0c00 0000 0c00
+		  0000000 0000 0000 0000 0000 0000 0000 0000 0000
+		  ...
+		  *
+		  0001000
diff --git a/Documentation/ABI/stable/sysfs-bus-usb b/Documentation/ABI/stable/sysfs-bus-usb
new file mode 100644
index 000000000..cad4bc232
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-usb
@@ -0,0 +1,142 @@
+What:		/sys/bus/usb/devices/.../power/persist
+Date:		May 2007
+KernelVersion:	2.6.23
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		USB device directories can contain a file named power/persist.
+		The file holds a boolean value (0 or 1) indicating whether or
+		not the "USB-Persist" facility is enabled for the device.  For
+		hubs this facility is always enabled and their device
+		directories will not contain this file.
+
+		For more information, see Documentation/driver-api/usb/persist.rst.
+
+What:		/sys/bus/usb/devices/.../power/autosuspend
+Date:		March 2007
+KernelVersion:	2.6.21
+Contact:	Alan Stern <stern@rowland.harvard.edu>
+Description:
+		Each USB device directory will contain a file named
+		power/autosuspend.  This file holds the time (in seconds)
+		the device must be idle before it will be autosuspended.
+		0 means the device will be autosuspended as soon as
+		possible.  Negative values will prevent the device from
+		being autosuspended at all, and writing a negative value
+		will resume the device if it is already suspended.
+
+		The autosuspend delay for newly-created devices is set to
+		the value of the usbcore.autosuspend module parameter.
+
+What:		/sys/bus/usb/device/.../power/connected_duration
+Date:		January 2008
+KernelVersion:	2.6.25
+Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+		If CONFIG_PM is enabled, then this file is present.  When read,
+		it returns the total time (in msec) that the USB device has been
+		connected to the machine.  This file is read-only.
+Users:
+		PowerTOP <powertop@lists.01.org>
+		https://01.org/powertop/
+
+What:		/sys/bus/usb/device/.../power/active_duration
+Date:		January 2008
+KernelVersion:	2.6.25
+Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+		If CONFIG_PM is enabled, then this file is present.  When read,
+		it returns the total time (in msec) that the USB device has been
+		active, i.e. not in a suspended state.  This file is read-only.
+
+		Tools can use this file and the connected_duration file to
+		compute the percentage of time that a device has been active.
+		For example::
+
+		  echo $((100 * `cat active_duration` / `cat connected_duration`))
+
+		will give an integer percentage.  Note that this does not
+		account for counter wrap.
+Users:
+		PowerTOP <powertop@lists.01.org>
+		https://01.org/powertop/
+
+What:		/sys/bus/usb/devices/<busnum>-<port[.port]>...:<config num>-<interface num>/supports_autosuspend
+Date:		January 2008
+KernelVersion:	2.6.27
+Contact:	Sarah Sharp <sarah.a.sharp@intel.com>
+Description:
+		When read, this file returns 1 if the interface driver
+		for this interface supports autosuspend.  It also
+		returns 1 if no driver has claimed this interface, as an
+		unclaimed interface will not stop the device from being
+		autosuspended if all other interface drivers are idle.
+		The file returns 0 if autosuspend support has not been
+		added to the driver.
+Users:
+		USB PM tool
+		git://git.moblin.org/users/sarah/usb-pm-tool/
+
+What:		/sys/bus/usb/device/.../avoid_reset_quirk
+Date:		December 2009
+Contact:	Oliver Neukum <oliver@neukum.org>
+Description:
+		Writing 1 to this file tells the kernel that this
+		device will morph into another mode when it is reset.
+		Drivers will not use reset for error handling for
+		such devices.
+Users:
+		usb_modeswitch
+
+What:		/sys/bus/usb/devices/.../devnum
+KernelVersion:	since at least 2.6.18
+Description:
+		Device address on the USB bus.
+Users:
+		libusb
+
+What:		/sys/bus/usb/devices/.../bConfigurationValue
+KernelVersion:	since at least 2.6.18
+Description:
+		bConfigurationValue of the *active* configuration for the
+		device. Writing 0 or -1 to bConfigurationValue will reset the
+		active configuration (unconfigure the device). Writing
+		another value will change the active configuration.
+
+		Note that some devices, in violation of the USB spec, have a
+		configuration with a value equal to 0. Writing 0 to
+		bConfigurationValue for these devices will install that
+		configuration, rather then unconfigure the device.
+
+		Writing -1 will always unconfigure the device.
+Users:
+		libusb
+
+What:		/sys/bus/usb/devices/.../busnum
+KernelVersion:	2.6.22
+Description:
+		Bus-number of the USB-bus the device is connected to.
+Users:
+		libusb
+
+What:		/sys/bus/usb/devices/.../descriptors
+KernelVersion:	2.6.26
+Description:
+		Binary file containing cached descriptors of the device. The
+		binary data consists of the device descriptor followed by the
+		descriptors for each configuration of the device.
+		Note that the wTotalLength of the config descriptors can not
+		be trusted, as the device may have a smaller config descriptor
+		than it advertises. The bLength field of each (sub) descriptor
+		can be trusted, and can be used to seek forward one (sub)
+		descriptor at a time until the next config descriptor is found.
+		All descriptors read from this file are in bus-endian format
+Users:
+		libusb
+
+What:		/sys/bus/usb/devices/.../speed
+KernelVersion:	since at least 2.6.18
+Description:
+		Speed the device is connected with to the usb-host in
+		Mbit / second. IE one of 1.5 / 12 / 480 / 5000.
+Users:
+		libusb
diff --git a/Documentation/ABI/stable/sysfs-bus-vmbus b/Documentation/ABI/stable/sysfs-bus-vmbus
new file mode 100644
index 000000000..c27b7b894
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-vmbus
@@ -0,0 +1,180 @@
+What:		/sys/bus/vmbus/devices/<UUID>/id
+Date:		Jul 2009
+KernelVersion:	2.6.31
+Contact:	K. Y. Srinivasan <kys@microsoft.com>
+Description:	The VMBus child_relid of the device's primary channel
+Users:		tools/hv/lsvmbus
+
+What:		/sys/bus/vmbus/devices/<UUID>/class_id
+Date:		Jul 2009
+KernelVersion:	2.6.31
+Contact:	K. Y. Srinivasan <kys@microsoft.com>
+Description:	The VMBus interface type GUID of the device
+Users:		tools/hv/lsvmbus
+
+What:		/sys/bus/vmbus/devices/<UUID>/device_id
+Date:		Jul 2009
+KernelVersion:	2.6.31
+Contact:	K. Y. Srinivasan <kys@microsoft.com>
+Description:	The VMBus interface instance GUID of the device
+Users:		tools/hv/lsvmbus
+
+What:		/sys/bus/vmbus/devices/<UUID>/channel_vp_mapping
+Date:		Jul 2015
+KernelVersion:	4.2.0
+Contact:	K. Y. Srinivasan <kys@microsoft.com>
+Description:	The mapping of which primary/sub channels are bound to which
+		Virtual Processors.
+		Format: <channel's child_relid:the bound cpu's number>
+Users:		tools/hv/lsvmbus
+
+What:		/sys/bus/vmbus/devices/<UUID>/device
+Date:		Dec. 2015
+KernelVersion:	4.5
+Contact:	K. Y. Srinivasan <kys@microsoft.com>
+Description:	The 16 bit device ID of the device
+Users:		tools/hv/lsvmbus and user level RDMA libraries
+
+What:		/sys/bus/vmbus/devices/<UUID>/vendor
+Date:		Dec. 2015
+KernelVersion:	4.5
+Contact:	K. Y. Srinivasan <kys@microsoft.com>
+Description:	The 16 bit vendor ID of the device
+Users:		tools/hv/lsvmbus and user level RDMA libraries
+
+What:		/sys/bus/vmbus/devices/<UUID>/numa_node
+Date:		Jul 2018
+KernelVersion:	4.19
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	This NUMA node to which the VMBUS device is
+		attached, or -1 if the node is unknown.
+
+What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Directory for per-channel information
+		NN is the VMBUS relid associtated with the channel.
+
+What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/cpu
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	VCPU (sub)channel is affinitized to
+Users:		tools/hv/lsvmbus and other debugging tools
+
+What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/in_mask
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Host to guest channel interrupt mask
+Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/latency
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Channel signaling latency. This file is available only for
+		performance critical channels (storage, network, etc.) that use
+		the monitor page mechanism.
+Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/out_mask
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Guest to host channel interrupt mask
+Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/pending
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Channel interrupt pending state. This file is available only for
+		performance critical channels (storage, network, etc.) that use
+		the monitor page mechanism.
+Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/read_avail
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Bytes available to read
+Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/write_avail
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Bytes available to write
+Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/events
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Number of times we have signaled the host
+Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/interrupts
+Date:		September. 2017
+KernelVersion:	4.14
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Number of times we have taken an interrupt (incoming)
+Users:		Debugging tools
+
+What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/subchannel_id
+Date:		January. 2018
+KernelVersion:	4.16
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Subchannel ID associated with VMBUS channel
+Users:		Debugging tools and userspace drivers
+
+What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/monitor_id
+Date:		January. 2018
+KernelVersion:	4.16
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Monitor bit associated with channel. This file is available only
+		for performance critical channels (storage, network, etc.) that
+		use the monitor page mechanism.
+Users:		Debugging tools and userspace drivers
+
+What:		/sys/bus/vmbus/devices/<UUID>/channels/<N>/ring
+Date:		January. 2018
+KernelVersion:	4.16
+Contact:	Stephen Hemminger <sthemmin@microsoft.com>
+Description:	Binary file created by uio_hv_generic for ring buffer
+Users:		Userspace drivers
+
+What:           /sys/bus/vmbus/devices/<UUID>/channels/<N>/intr_in_full
+Date:           February 2019
+KernelVersion:  5.0
+Contact:        Michael Kelley <mikelley@microsoft.com>
+Description:    Number of guest to host interrupts caused by the inbound ring
+		buffer transitioning from full to not full while a packet is
+		waiting for buffer space to become available
+Users:          Debugging tools
+
+What:           /sys/bus/vmbus/devices/<UUID>/channels/<N>/intr_out_empty
+Date:           February 2019
+KernelVersion:  5.0
+Contact:        Michael Kelley <mikelley@microsoft.com>
+Description:    Number of guest to host interrupts caused by the outbound ring
+		buffer transitioning from empty to not empty
+Users:          Debugging tools
+
+What:           /sys/bus/vmbus/devices/<UUID>/channels/<N>/out_full_first
+Date:           February 2019
+KernelVersion:  5.0
+Contact:        Michael Kelley <mikelley@microsoft.com>
+Description:    Number of write operations that were the first to encounter an
+		outbound ring buffer full condition
+Users:          Debugging tools
+
+What:           /sys/bus/vmbus/devices/<UUID>/channels/<N>/out_full_total
+Date:           February 2019
+KernelVersion:  5.0
+Contact:        Michael Kelley <mikelley@microsoft.com>
+Description:    Total number of write operations that encountered an outbound
+		ring buffer full condition
+Users:          Debugging tools
diff --git a/Documentation/ABI/stable/sysfs-bus-w1 b/Documentation/ABI/stable/sysfs-bus-w1
new file mode 100644
index 000000000..5cd5e872b
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-w1
@@ -0,0 +1,12 @@
+What:		/sys/bus/w1/devices/.../w1_master_timeout_us
+Date:		April 2015
+Contact:	Dmitry Khromov <dk@icelogic.net>
+Description:	Bus scanning interval, microseconds component.
+		Some of 1-Wire devices commonly associated with physical access
+		control systems are attached/generate presence for as short as
+		100 ms - hence the tens-to-hundreds milliseconds scan intervals
+		are required.
+
+		see Documentation/w1/w1-generic.rst for detailed information.
+Users:		any user space application which wants to know bus scanning
+		interval
diff --git a/Documentation/ABI/stable/sysfs-bus-xen-backend b/Documentation/ABI/stable/sysfs-bus-xen-backend
new file mode 100644
index 000000000..e8b60bd76
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-bus-xen-backend
@@ -0,0 +1,84 @@
+What:		/sys/bus/xen-backend/devices/*/devtype
+Date:		Feb 2009
+KernelVersion:	2.6.38
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                The type of the device.  e.g., one of: 'vbd' (block),
+                'vif' (network), or 'vfb' (framebuffer).
+
+What:		/sys/bus/xen-backend/devices/*/nodename
+Date:		Feb 2009
+KernelVersion:	2.6.38
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                XenStore node (under /local/domain/NNN/) for this
+                backend device.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/physical_device
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                The major:minor number (in hexidecimal) of the
+                physical device providing the storage for this backend
+                block device.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/mode
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Whether the block device is read-only ('r') or
+                read-write ('w').
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/f_req
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of flush requests from the frontend.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/oo_req
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of requests delayed because the backend was too
+                busy processing previous requests.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/rd_req
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of read requests from the frontend.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/rd_sect
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of sectors read by the frontend.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/wr_req
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of write requests from the frontend.
+
+What:		/sys/bus/xen-backend/devices/vbd-*/statistics/wr_sect
+Date:		April 2011
+KernelVersion:	3.0
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+                Number of sectors written by the frontend.
+
+What:		/sys/bus/xen-backend/devices/*/state
+Date:		August 2018
+KernelVersion:	4.19
+Contact:	Joe Jin <joe.jin@oracle.com>
+Description:
+                The state of the device. One of: 'Unknown',
+                'Initialising', 'Initialised', 'Connected', 'Closing',
+                'Closed', 'Reconfiguring', 'Reconfigured'.
diff --git a/Documentation/ABI/stable/sysfs-class-backlight b/Documentation/ABI/stable/sysfs-class-backlight
new file mode 100644
index 000000000..023fb5264
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-class-backlight
@@ -0,0 +1,57 @@
+What:		/sys/class/backlight/<backlight>/bl_power
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Control BACKLIGHT power, values are FB_BLANK_* from fb.h
+
+		 - FB_BLANK_UNBLANK (0)   : power on.
+		 - FB_BLANK_POWERDOWN (4) : power off
+Users:		HAL
+
+What:		/sys/class/backlight/<backlight>/brightness
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Control the brightness for this <backlight>. Values
+		are between 0 and max_brightness. This file will also
+		show the brightness level stored in the driver, which
+		may not be the actual brightness (see actual_brightness).
+Users:		HAL
+
+What:		/sys/class/backlight/<backlight>/actual_brightness
+Date:		March 2006
+KernelVersion:	2.6.17
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Show the actual brightness by querying the hardware.
+Users:		HAL
+
+What:		/sys/class/backlight/<backlight>/max_brightness
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	Richard Purdie <rpurdie@rpsys.net>
+Description:
+		Maximum brightness for <backlight>.
+Users:		HAL
+
+What:		/sys/class/backlight/<backlight>/type
+Date:		September 2010
+KernelVersion:	2.6.37
+Contact:	Matthew Garrett <mjg@redhat.com>
+Description:
+		The type of interface controlled by <backlight>.
+		"firmware": The driver uses a standard firmware interface
+		"platform": The driver uses a platform-specific interface
+		"raw": The driver controls hardware registers directly
+
+		In the general case, when multiple backlight
+		interfaces are available for a single device, firmware
+		control should be preferred to platform control should
+		be preferred to raw control. Using a firmware
+		interface reduces the probability of confusion with
+		the hardware and the OS independently updating the
+		backlight state. Platform interfaces are mostly a
+		holdover from pre-standardisation of firmware
+		interfaces.
diff --git a/Documentation/ABI/stable/sysfs-class-infiniband b/Documentation/ABI/stable/sysfs-class-infiniband
new file mode 100644
index 000000000..348c4ac80
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-class-infiniband
@@ -0,0 +1,804 @@
+sysfs interface common for all infiniband devices
+-------------------------------------------------
+
+What:		/sys/class/infiniband/<device>/node_type
+What:		/sys/class/infiniband/<device>/node_guid
+What:		/sys/class/infiniband/<device>/sys_image_guid
+Date:		Apr, 2005
+KernelVersion:	v2.6.12
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		=============== ===========================================
+		node_type:	(RO) Node type (CA, RNIC, usNIC, usNIC UDP,
+				switch or router)
+
+		node_guid:	(RO) Node GUID
+
+		sys_image_guid:	(RO) System image GUID
+		=============== ===========================================
+
+
+What:		/sys/class/infiniband/<device>/node_desc
+Date:		Feb, 2006
+KernelVersion:	v2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		(RW) Update the node description with information such as the
+		node's hostname, so that IB network management software can tie
+		its view to the real world.
+
+
+What:		/sys/class/infiniband/<device>/fw_ver
+Date:		Jun, 2016
+KernelVersion:	v4.10
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		(RO) Display firmware version
+
+
+What:		/sys/class/infiniband/<device>/ports/<port-num>/lid
+What:		/sys/class/infiniband/<device>/ports/<port-num>/rate
+What:		/sys/class/infiniband/<device>/ports/<port-num>/lid_mask_count
+What:		/sys/class/infiniband/<device>/ports/<port-num>/sm_sl
+What:		/sys/class/infiniband/<device>/ports/<port-num>/sm_lid
+What:		/sys/class/infiniband/<device>/ports/<port-num>/state
+What:		/sys/class/infiniband/<device>/ports/<port-num>/phys_state
+What:		/sys/class/infiniband/<device>/ports/<port-num>/cap_mask
+Date:		Apr, 2005
+KernelVersion:	v2.6.12
+Contact:	linux-rdma@vger.kernel.org
+Description:
+
+		=============== ===============================================
+		lid:		(RO) Port LID
+
+		rate:		(RO) Port data rate (active width * active
+				speed)
+
+		lid_mask_count:	(RO) Port LID mask count
+
+		sm_sl:		(RO) Subnet manager SL for port's subnet
+
+		sm_lid:		(RO) Subnet manager LID for port's subnet
+
+		state:		(RO) Port state (DOWN, INIT, ARMED, ACTIVE or
+				ACTIVE_DEFER)
+
+		phys_state:	(RO) Port physical state (Sleep, Polling,
+				LinkUp, etc)
+
+		cap_mask:	(RO) Port capability mask. 2 bits here are
+				settable- IsCommunicationManagementSupported
+				(set when CM module is loaded) and IsSM (set
+				via open of issmN file).
+		=============== ===============================================
+
+
+What:		/sys/class/infiniband/<device>/ports/<port-num>/link_layer
+Date:		Oct, 2010
+KernelVersion:	v2.6.37
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		(RO) Link layer type information (Infiniband or Ethernet type)
+
+
+What:		/sys/class/infiniband/<device>/ports/<port-num>/counters/symbol_error
+What:		/sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_errors
+What:		/sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_remote_physical_errors
+What:		/sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_switch_relay_errors
+What:		/sys/class/infiniband/<device>/ports/<port-num>/counters/link_error_recovery
+What:		/sys/class/infiniband/<device>/ports/<port-num>/counters/port_xmit_constraint_errors
+What:		/sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_contraint_errors
+What:		/sys/class/infiniband/<device>/ports/<port-num>/counters/local_link_integrity_errors
+What:		/sys/class/infiniband/<device>/ports/<port-num>/counters/excessive_buffer_overrun_errors
+What:		/sys/class/infiniband/<device>/ports/<port-num>/counters/port_xmit_data
+What:		/sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_data
+What:		/sys/class/infiniband/<device>/ports/<port-num>/counters/port_xmit_packets
+What:		/sys/class/infiniband/<device>/ports/<port-num>/counters/port_rcv_packets
+What:		/sys/class/infiniband/<device>/ports/<port-num>/counters/unicast_rcv_packets
+What:		/sys/class/infiniband/<device>/ports/<port-num>/counters/unicast_xmit_packets
+What:		/sys/class/infiniband/<device>/ports/<port-num>/counters/multicast_rcv_packets
+What:		/sys/class/infiniband/<device>/ports/<port-num>/counters/multicast_xmit_packets
+What:		/sys/class/infiniband/<device>/ports/<port-num>/counters/link_downed
+What:		/sys/class/infiniband/<device>/ports/<port-num>/counters/port_xmit_discards
+What:		/sys/class/infiniband/<device>/ports/<port-num>/counters/VL15_dropped
+What:		/sys/class/infiniband/<device>/ports/<port-num>/counters/port_xmit_wait
+Date:		Apr, 2005
+KernelVersion:	v2.6.12
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		**Errors info**:
+
+		symbol_error: (RO) Total number of minor link errors detected on
+		one or more physical lanes.
+
+		port_rcv_errors : (RO) Total number of packets containing an
+		error that were received on the port.
+
+		port_rcv_remote_physical_errors : (RO) Total number of packets
+		marked with the EBP delimiter received on the port.
+
+		port_rcv_switch_relay_errors : (RO) Total number of packets
+		received on the port that were discarded because they could not
+		be forwarded by the switch relay.
+
+		link_error_recovery: (RO) Total number of times the Port
+		Training state machine has successfully completed the link error
+		recovery process.
+
+		port_xmit_constraint_errors: (RO) Total number of packets not
+		transmitted from the switch physical port due to outbound raw
+		filtering or failing outbound partition or IP version check.
+
+		port_rcv_constraint_errors: (RO) Total number of packets
+		received on the switch physical port that are discarded due to
+		inbound raw filtering or failing inbound partition or IP version
+		check.
+
+		local_link_integrity_errors: (RO) The number of times that the
+		count of local physical errors exceeded the threshold specified
+		by LocalPhyErrors
+
+		excessive_buffer_overrun_errors: (RO) This counter, indicates an
+		input buffer overrun. It indicates possible misconfiguration of
+		a port, either by the Subnet Manager (SM) or by user
+		intervention. It can also indicate hardware issues or extremely
+		poor link signal integrity
+
+		**Data info**:
+
+		port_xmit_data: (RO) Total number of data octets, divided by 4
+		(lanes), transmitted on all VLs. This is 64 bit counter
+
+		port_rcv_data: (RO) Total number of data octets, divided by 4
+		(lanes), received on all VLs. This is 64 bit counter.
+
+		port_xmit_packets: (RO) Total number of packets transmitted on
+		all VLs from this port. This may include packets with errors.
+		This is 64 bit counter.
+
+		port_rcv_packets: (RO) Total number of packets (this may include
+		packets containing Errors. This is 64 bit counter.
+
+		link_downed: (RO) Total number of times the Port Training state
+		machine has failed the link error recovery process and downed
+		the link.
+
+		unicast_rcv_packets: (RO) Total number of unicast packets,
+		including unicast packets containing errors.
+
+		unicast_xmit_packets: (RO) Total number of unicast packets
+		transmitted on all VLs from the port. This may include unicast
+		packets with errors.
+
+		multicast_rcv_packets: (RO) Total number of multicast packets,
+		including multicast packets containing errors.
+
+		multicast_xmit_packets: (RO) Total number of multicast packets
+		transmitted on all VLs from the port. This may include multicast
+		packets with errors.
+
+		**Misc info**:
+
+		port_xmit_discards: (RO) Total number of outbound packets
+		discarded by the port because the port is down or congested.
+
+		VL15_dropped: (RO) Number of incoming VL15 packets dropped due
+		to resource limitations (e.g., lack of buffers) of the port.
+
+		port_xmit_wait: (RO) The number of ticks during which the port
+		had data to transmit but no data was sent during the entire tick
+		(either because of insufficient credits or because of lack of
+		arbitration).
+
+		Each of these files contains the corresponding value from the
+		port's Performance Management PortCounters attribute, as
+		described in the InfiniBand Architecture Specification.
+
+
+What:		/sys/class/infiniband/<device-name>/hw_counters/lifespan
+What:		/sys/class/infiniband/<device-name>/ports/<port-num>/hw_counters/lifespan
+Date:		May, 2016
+KernelVersion:	4.6
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		The optional "hw_counters" subdirectory can be under either the
+		parent device or the port subdirectories or both. If present,
+		there are a list of counters provided by the hardware. They may
+		match some of the counters in the counters directory, but they
+		often include many other counters. In addition to the various
+		counters, there will be a file named "lifespan" that configures
+		how frequently the core should update the counters when they are
+		being accessed (counters are not updated if they are not being
+		accessed). The lifespan is in milliseconds and defaults to 10
+		unless set to something else by the driver. Users may echo a
+		value between 0-10000 to the lifespan file to set the length
+		of time between updates in milliseconds.
+
+
+What:		/sys/class/infiniband/<hca>/ports/<port-number>/gid_attrs/ndevs/<gid-index>
+Date:		November 29, 2015
+KernelVersion:	4.4.0
+Contact:	linux-rdma@vger.kernel.org
+Description: 	The net-device's name associated with the GID resides
+		at index <gid-index>.
+
+What:		/sys/class/infiniband/<hca>/ports/<port-number>/gid_attrs/types/<gid-index>
+Date:		November 29, 2015
+KernelVersion:	4.4.0
+Contact:	linux-rdma@vger.kernel.org
+Description: 	The RoCE type of the associated GID resides at index <gid-index>.
+		This could either be "IB/RoCE v1" for IB and RoCE v1 based GIDs
+		or "RoCE v2" for RoCE v2 based GIDs.
+
+
+What:		/sys/class/infiniband_mad/umadN/ibdev
+What:		/sys/class/infiniband_mad/umadN/port
+What:		/sys/class/infiniband_mad/issmN/ibdev
+What:		/sys/class/infiniband_mad/issmN/port
+Date:		Apr, 2005
+KernelVersion:	v2.6.12
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		Each port of each InfiniBand device has a "umad" device and an
+		"issm" device attached. For example, a two-port HCA will have
+		two umad devices and two issm devices, while a switch will have
+		one device of each type (for switch port 0).
+
+		======= =====================================
+		ibdev:	(RO) Show Infiniband (IB) device name
+
+		port:	(RO) Display port number
+		======= =====================================
+
+
+What:		/sys/class/infiniband_mad/abi_version
+Date:		Apr, 2005
+KernelVersion:	v2.6.12
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		(RO) Value is incremented if any changes are made that break
+		userspace ABI compatibility of umad & issm devices.
+
+
+What:		/sys/class/infiniband_verbs/uverbsN/ibdev
+What:		/sys/class/infiniband_verbs/uverbsN/abi_version
+Date:		Sept, 2005
+KernelVersion:	v2.6.14
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		=============== ===========================================
+		ibdev:		(RO) Display Infiniband (IB) device name
+
+		abi_version:	(RO) Show ABI version of IB device specific
+				interfaces.
+		=============== ===========================================
+
+
+What:		/sys/class/infiniband_verbs/abi_version
+Date:		Sep, 2005
+KernelVersion:	v2.6.14
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		(RO) Value is incremented if any changes are made that break
+		userspace ABI compatibility of uverbs devices.
+
+
+sysfs interface for Mellanox IB HCA low-level driver (mthca)
+------------------------------------------------------------
+
+What:		/sys/class/infiniband/mthcaX/hw_rev
+What:		/sys/class/infiniband/mthcaX/hca_type
+What:		/sys/class/infiniband/mthcaX/board_id
+Date:		Apr, 2005
+KernelVersion:	v2.6.12
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		=============== ================================================
+		hw_rev:		(RO) Hardware revision number
+
+		hca_type:	(RO) Host Channel Adapter type: MT23108, MT25208
+				(MT23108 compat mode), MT25208 or MT25204
+
+		board_id:	(RO) Manufacturing board ID
+		=============== ================================================
+
+
+sysfs interface for Mellanox ConnectX HCA IB driver (mlx4)
+----------------------------------------------------------
+
+What:		/sys/class/infiniband/mlx4_X/hw_rev
+What:		/sys/class/infiniband/mlx4_X/hca_type
+What:		/sys/class/infiniband/mlx4_X/board_id
+Date:		Sep, 2007
+KernelVersion:	v2.6.24
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		=============== ===============================
+		hw_rev:		(RO) Hardware revision number
+
+		hca_type:	(RO) Host channel adapter type
+
+		board_id:	(RO) Manufacturing board ID
+		=============== ===============================
+
+
+What:		/sys/class/infiniband/mlx4_X/iov/ports/<port-num>/gids/<n>
+What:		/sys/class/infiniband/mlx4_X/iov/ports/<port-num>/admin_guids/<n>
+What:		/sys/class/infiniband/mlx4_X/iov/ports/<port-num>/pkeys/<n>
+What:		/sys/class/infiniband/mlx4_X/iov/ports/<port-num>/mcgs/
+What:		/sys/class/infiniband/mlx4_X/iov/ports/<pci-slot-num>/ports/<m>/gid_idx/0
+What:		/sys/class/infiniband/mlx4_X/iov/ports/<pci-slot-num>/ports/<m>/pkey_idx/<n>
+Date:		Aug, 2012
+KernelVersion:	v3.6.15
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		The sysfs iov directory is used to manage and examine the port
+		P_Key and guid paravirtualization. This directory is added only
+		for the master -- slaves do not have it.
+
+		Under iov/ports, the administrator may examine the gid and P_Key
+		tables as they are present in the device (and as are seen in the
+		"network view" presented to the SM).
+
+		The "pkeys" and "gids" subdirectories contain one file for each
+		entry in the port's P_Key or GID table respectively. For
+		example, ports/1/pkeys/10 contains the value at index 10 in port
+		1's P_Key table.
+
+		======================= ==========================================
+		gids/<n>:		(RO) The physical port gids n = 0..127
+
+		admin_guids/<n>:	(RW) Allows examining or changing the
+					administrative state of a given GUID
+					n = 0..127
+
+		pkeys/<n>:		(RO) Displays the contents of the physical
+					key table n = 0..126
+
+		mcgs/:			(RO) Muticast group table
+
+		<m>/gid_idx/0:		(RO) Display the GID mapping m = 1..2
+
+		<m>/pkey_idx/<n>:	(RW) Writable except for RoCE pkeys.
+					m = 1..2, n = 0..126
+
+					Under the iov/<pci slot number>
+					directories, the admin may map the index
+					numbers in the physical tables (as under
+					iov/ports) to the paravirtualized index
+					numbers that guests see.
+
+					For example, if the administrator, for
+					port 1 on guest 2 maps physical pkey
+					index 10 to virtual index 1, then that
+					guest, whenever it uses its pkey index
+					1, will actually be using the real pkey
+					index 10.
+		======================= ==========================================
+
+
+What:		/sys/class/infiniband/mlx4_X/iov/<pci-slot-num>/ports/<m>/smi_enabled
+What:           /sys/class/infiniband/mlx4_X/iov/<pci-slot-num>/ports/<m>/enable_smi_admin
+Date:		May, 2014
+KernelVersion:	v3.15.7
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		Enabling QP0 on VFs for selected VF/port. By default, no VFs are
+		enabled for QP0 operation.
+
+		================= ==== ===========================================
+		smi_enabled:	  (RO) Indicates whether smi is currently enabled
+				       for the indicated VF/port
+
+		enable_smi_admin: (RW) Used by the admin to request that smi
+				       capability be enabled or disabled for the
+				       indicated VF/port. 0 = disable, 1 = enable.
+		================= ==== ===========================================
+
+		The requested enablement will occur at the next reset of the VF
+		(e.g. driver restart on the VM which owns the VF).
+
+
+sysfs interface for Chelsio T4/T5 RDMA driver (cxgb4)
+-----------------------------------------------------
+
+What:		/sys/class/infiniband/cxgb4_X/hw_rev
+What:		/sys/class/infiniband/cxgb4_X/hca_type
+What:		/sys/class/infiniband/cxgb4_X/board_id
+Date:		Apr, 2010
+KernelVersion:	v2.6.35
+Contact:	linux-rdma@vger.kernel.org
+Description:
+
+		=============== =============================================
+		hw_rev:		(RO) Hardware revision number
+
+		hca_type:	(RO) Driver short name. Should normally match
+				the name in its bus driver structure (e.g.
+				pci_driver::name)
+
+		board_id:	(RO) Manufacturing board id. (Vendor + device
+				information)
+		=============== =============================================
+
+
+sysfs interface for Intel IB driver qib
+---------------------------------------
+
+What:		/sys/class/infiniband/qibX/version
+What:		/sys/class/infiniband/qibX/hw_rev
+What:		/sys/class/infiniband/qibX/hca_type
+What:		/sys/class/infiniband/qibX/board_id
+What:		/sys/class/infiniband/qibX/boardversion
+What:		/sys/class/infiniband/qibX/nctxts
+What:		/sys/class/infiniband/qibX/localbus_info
+What:		/sys/class/infiniband/qibX/tempsense
+What:		/sys/class/infiniband/qibX/serial
+What:		/sys/class/infiniband/qibX/nfreectxts
+What:		/sys/class/infiniband/qibX/chip_reset
+Date:		May, 2010
+KernelVersion:	v2.6.35
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		=============== ======================================================
+		version:	(RO) Display version information of installed software
+				and drivers.
+
+		hw_rev:		(RO) Hardware revision number
+
+		hca_type:	(RO) Host channel adapter type
+
+		board_id:	(RO) Manufacturing board id
+
+		boardversion:	(RO) Current version of the chip architecture
+
+		nctxts:		(RO) Return the number of user ports (contexts)
+				available
+
+		localbus_info:	(RO) Human readable localbus info
+
+		tempsense:	(RO) Display temp sense registers in decimal
+
+		serial:		(RO) Serial number of the HCA
+
+		nfreectxts:	(RO) The number of free user ports (contexts)
+				available.
+
+		chip_reset:	(WO) Reset the chip if possible by writing
+				"reset" to this file. Only allowed if no user
+				contexts are open that use chip resources.
+		=============== ======================================================
+
+
+What:		/sys/class/infiniband/qibX/ports/N/sl2vl/[0-15]
+Date:		May, 2010
+KernelVersion:	v2.6.35
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		(RO) The directory contains 16 files numbered 0-15 that specify
+		the Service Level (SL). Listing the SL files returns the Virtual
+		Lane (VL) as programmed by the SL.
+
+What:		/sys/class/infiniband/qibX/ports/N/CCMgtA/cc_settings_bin
+What:		/sys/class/infiniband/qibX/ports/N/CCMgtA/cc_table_bin
+Date:		May, 2010
+KernelVersion:	v2.6.35
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		Per-port congestion control. Both are binary attributes.
+
+		=============== ================================================
+		cc_table_bin	(RO) Congestion control table size followed by
+				table entries.
+
+		cc_settings_bin (RO) Congestion settings: port control, control
+				map and an array of 16 entries for the
+				congestion entries - increase, timer, event log
+				trigger threshold and the minimum injection rate
+				delay.
+		=============== ================================================
+
+What:		/sys/class/infiniband/qibX/ports/N/linkstate/loopback
+What:		/sys/class/infiniband/qibX/ports/N/linkstate/led_override
+What:		/sys/class/infiniband/qibX/ports/N/linkstate/hrtbt_enable
+What:		/sys/class/infiniband/qibX/ports/N/linkstate/status
+What:		/sys/class/infiniband/qibX/ports/N/linkstate/status_str
+Date:		May, 2010
+KernelVersion:	v2.6.35
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		[to be documented]
+
+		=============== ===============================================
+		loopback:	(WO)
+		led_override:	(WO)
+		hrtbt_enable:	(RW)
+		status:		(RO)
+
+		status_str:	(RO) Displays information about the link state,
+				possible cable/switch problems, and hardware
+				errors. Possible states are- "Initted",
+				"Present", "IB_link_up", "IB_configured" or
+				"Fatal_Hardware_Error".
+		=============== ===============================================
+
+What:		/sys/class/infiniband/qibX/ports/N/diag_counters/rc_resends
+What:		/sys/class/infiniband/qibX/ports/N/diag_counters/seq_naks
+What:		/sys/class/infiniband/qibX/ports/N/diag_counters/rdma_seq
+What:		/sys/class/infiniband/qibX/ports/N/diag_counters/rnr_naks
+What:		/sys/class/infiniband/qibX/ports/N/diag_counters/other_naks
+What:		/sys/class/infiniband/qibX/ports/N/diag_counters/rc_timeouts
+What:		/sys/class/infiniband/qibX/ports/N/diag_counters/look_pkts
+What:		/sys/class/infiniband/qibX/ports/N/diag_counters/pkt_drops
+What:		/sys/class/infiniband/qibX/ports/N/diag_counters/dma_wait
+What:		/sys/class/infiniband/qibX/ports/N/diag_counters/unaligned
+Date:		May, 2010
+KernelVersion:	v2.6.35
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		[to be documented]
+
+
+sysfs interface for Mellanox Connect-IB HCA driver mlx5
+-------------------------------------------------------
+
+What:		/sys/class/infiniband/mlx5_X/hw_rev
+What:		/sys/class/infiniband/mlx5_X/hca_type
+What:		/sys/class/infiniband/mlx5_X/reg_pages
+What:		/sys/class/infiniband/mlx5_X/fw_pages
+Date:		Jul, 2013
+KernelVersion:	v3.11
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		[to be documented]
+
+
+sysfs interface for Cisco VIC (usNIC) Verbs Driver
+--------------------------------------------------
+
+What:		/sys/class/infiniband/usnic_X/board_id
+What:		/sys/class/infiniband/usnic_X/config
+What:		/sys/class/infiniband/usnic_X/qp_per_vf
+What:		/sys/class/infiniband/usnic_X/max_vf
+What:		/sys/class/infiniband/usnic_X/cq_per_vf
+What:		/sys/class/infiniband/usnic_X/iface
+Date:		Sep, 2013
+KernelVersion:	v3.14
+Contact:	Christian Benvenuti <benve@cisco.com>,
+		Dave Goodell <dgoodell@cisco.com>,
+		linux-rdma@vger.kernel.org
+Description:
+
+		=============== ===============================================
+		board_id:	(RO) Manufacturing board id
+
+		config:		(RO) Report the configuration for this PF
+
+		qp_per_vf:	(RO) Queue pairs per virtual function.
+
+		max_vf:		(RO) Max virtual functions
+
+		cq_per_vf:	(RO) Completion queue per virtual function
+
+		iface:		(RO) Shows which network interface this usNIC
+				entry is associated to (visible with ifconfig).
+		=============== ===============================================
+
+What:		/sys/class/infiniband/usnic_X/qpn/summary
+What:		/sys/class/infiniband/usnic_X/qpn/context
+Date:		Sep, 2013
+KernelVersion:	v3.14
+Contact:	Christian Benvenuti <benve@cisco.com>,
+		Dave Goodell <dgoodell@cisco.com>,
+		linux-rdma@vger.kernel.org
+Description:
+		[to be documented]
+
+
+sysfs interface for Emulex RoCE HCA Driver
+------------------------------------------
+
+What:		/sys/class/infiniband/ocrdmaX/hw_rev
+Date:		Feb, 2014
+KernelVersion:	v3.14
+Description:
+		hw_rev:		(RO) Hardware revision number
+
+What:		/sys/class/infiniband/ocrdmaX/hca_type
+Date:		Jun, 2014
+KernelVersion:	v3.16
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		hca_type:	(RO) Display FW version
+
+
+sysfs interface for Intel Omni-Path driver (HFI1)
+-------------------------------------------------
+
+What:		/sys/class/infiniband/hfi1_X/hw_rev
+What:		/sys/class/infiniband/hfi1_X/board_id
+What:		/sys/class/infiniband/hfi1_X/nctxts
+What:		/sys/class/infiniband/hfi1_X/serial
+What:		/sys/class/infiniband/hfi1_X/chip_reset
+What:		/sys/class/infiniband/hfi1_X/boardversion
+What:		/sys/class/infiniband/hfi1_X/nfreectxts
+What:		/sys/class/infiniband/hfi1_X/tempsense
+Date:		May, 2016
+KernelVersion:	v4.6
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		=============== =============================================
+		hw_rev:		(RO) Hardware revision number
+
+		board_id:	(RO) Manufacturing board id
+
+		nctxts:		(RO) Total contexts available.
+
+		serial:		(RO) Board serial number
+
+		chip_reset:	(WO) Write "reset" to this file to reset the
+				chip if possible. Only allowed if no user
+				contexts are open that use chip resources.
+
+		boardversion:	(RO) Human readable board info
+
+		nfreectxts:	(RO) The number of free user ports (contexts)
+				available.
+
+		tempsense:	(RO) Thermal sense information
+		=============== =============================================
+
+
+What:		/sys/class/infiniband/hfi1_X/ports/N/CCMgtA/cc_settings_bin
+What:		/sys/class/infiniband/hfi1_X/ports/N/CCMgtA/cc_table_bin
+What:		/sys/class/infiniband/hfi1_X/ports/N/CCMgtA/cc_prescan
+Date:		May, 2016
+KernelVersion:	v4.6
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		Per-port congestion control.
+
+		=============== ================================================
+		cc_table_bin	(RO) CCA tables used by PSM2 Congestion control
+				table size followed by table entries. Binary
+				attribute.
+
+		cc_settings_bin (RO) Congestion settings: port control, control
+				map and an array of 16 entries for the
+				congestion entries - increase, timer, event log
+				trigger threshold and the minimum injection rate
+				delay. Binary attribute.
+
+		cc_prescan	(RW) enable prescanning for faster BECN
+				response. Write "on" to enable and "off" to
+				disable.
+		=============== ================================================
+
+What:		/sys/class/infiniband/hfi1_X/ports/N/sc2vl/[0-31]
+What:		/sys/class/infiniband/hfi1_X/ports/N/sl2sc/[0-31]
+What:		/sys/class/infiniband/hfi1_X/ports/N/vl2mtu/[0-15]
+Date:		May, 2016
+KernelVersion:	v4.6
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		=============== ===================================================
+		sc2vl/:		(RO) 32 files (0 - 31) used to translate sl->vl
+
+		sl2sc/:		(RO) 32 files (0 - 31) used to translate sl->sc
+
+		vl2mtu/:	(RO) 16 files (0 - 15) used to determine MTU for vl
+		=============== ===================================================
+
+
+What:		/sys/class/infiniband/hfi1_X/sdma_N/cpu_list
+What:		/sys/class/infiniband/hfi1_X/sdma_N/vl
+Date:		Sept, 2016
+KernelVersion:	v4.8
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		sdma<N>/ contains one directory per sdma engine (0 - 15)
+
+		=============== ==============================================
+		cpu_list:	(RW) List of cpus for user-process to sdma
+				engine assignment.
+
+		vl:		(RO) Displays the virtual lane (vl) the sdma
+				engine maps to.
+		=============== ==============================================
+
+		This interface gives the user control on the affinity settings
+		for the device. As an example, to set an sdma engine irq
+		affinity and thread affinity of a user processes to use the
+		sdma engine, which is "near" in terms of NUMA configuration, or
+		physical cpu location, the user will do::
+
+		  echo "3" > /proc/irq/<N>/smp_affinity_list
+		  echo "4-7" > /sys/devices/.../sdma3/cpu_list
+		  cat /sys/devices/.../sdma3/vl
+		  0
+		  echo "8" > /proc/irq/<M>/smp_affinity_list
+		  echo "9-12" > /sys/devices/.../sdma4/cpu_list
+		  cat /sys/devices/.../sdma4/vl
+		  1
+
+		to make sure that when a process runs on cpus 4,5,6, or 7, and
+		uses vl=0, then sdma engine 3 is selected by the driver, and
+		also the interrupt of the sdma engine 3 is steered to cpu 3.
+		Similarly, when a process runs on cpus 9,10,11, or 12 and sets
+		vl=1, then engine 4 will be selected and the irq of the sdma
+		engine 4 is steered to cpu 8.  This assumes that in the above N
+		is the irq number of "sdma3", and M is irq number of "sdma4" in
+		the /proc/interrupts file.
+
+
+sysfs interface for Intel(R) X722 iWARP i40iw driver
+----------------------------------------------------
+
+What:		/sys/class/infiniband/i40iwX/hw_rev
+What:		/sys/class/infiniband/i40iwX/hca_type
+What:		/sys/class/infiniband/i40iwX/board_id
+Date:		Jan, 2016
+KernelVersion:	v4.10
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		=============== ==== ========================
+		hw_rev:		(RO) Hardware revision number
+
+		hca_type:	(RO) Show HCA type (I40IW)
+
+		board_id:	(RO) I40IW board ID
+		=============== ==== ========================
+
+
+sysfs interface for QLogic qedr NIC Driver
+------------------------------------------
+
+What:		/sys/class/infiniband/qedrX/hw_rev
+What:		/sys/class/infiniband/qedrX/hca_type
+Date:		Oct, 2016
+KernelVersion:	v4.10
+Contact:	linux-rdma@vger.kernel.org
+Description:
+
+		=============== ==== ========================
+		hw_rev:		(RO) Hardware revision number
+
+		hca_type:	(RO) Display HCA type
+		=============== ==== ========================
+
+
+sysfs interface for VMware Paravirtual RDMA driver
+--------------------------------------------------
+
+What:		/sys/class/infiniband/vmw_pvrdmaX/hw_rev
+What:		/sys/class/infiniband/vmw_pvrdmaX/hca_type
+What:		/sys/class/infiniband/vmw_pvrdmaX/board_id
+Date:		Oct, 2016
+KernelVersion:	v4.10
+Contact:	linux-rdma@vger.kernel.org
+Description:
+
+		=============== ==== =====================================
+		hw_rev:		(RO) Hardware revision number
+
+		hca_type:	(RO) Host channel adapter type
+
+		board_id:	(RO) Display PVRDMA manufacturing board ID
+		=============== ==== =====================================
+
+
+sysfs interface for Broadcom NetXtreme-E RoCE driver
+----------------------------------------------------
+
+What:		/sys/class/infiniband/bnxt_reX/hw_rev
+What:		/sys/class/infiniband/bnxt_reX/hca_type
+Date:		Feb, 2017
+KernelVersion:	v4.11
+Contact:	linux-rdma@vger.kernel.org
+Description:
+		=============== ==== =========================
+		hw_rev:		(RO) Hardware revision number
+
+		hca_type:	(RO) Host channel adapter type
+		=============== ==== =========================
diff --git a/Documentation/ABI/stable/sysfs-class-rfkill b/Documentation/ABI/stable/sysfs-class-rfkill
new file mode 100644
index 000000000..037979f7d
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-class-rfkill
@@ -0,0 +1,93 @@
+rfkill - radio frequency (RF) connector kill switch support
+
+For details to this subsystem look at Documentation/driver-api/rfkill.rst.
+
+For the deprecated ``/sys/class/rfkill/*/claim`` knobs of this interface look in
+Documentation/ABI/removed/sysfs-class-rfkill.
+
+What: 		/sys/class/rfkill
+Date:		09-Jul-2007
+KernelVersion:	v2.6.22
+Contact:	linux-wireless@vger.kernel.org,
+Description: 	The rfkill class subsystem folder.
+		Each registered rfkill driver is represented by an rfkillX
+		subfolder (X being an integer >= 0).
+
+
+What:		/sys/class/rfkill/rfkill[0-9]+/name
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description: 	Name assigned by driver to this key (interface or driver name).
+Values: 	arbitrary string.
+
+
+What: 		/sys/class/rfkill/rfkill[0-9]+/type
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description: 	Driver type string ("wlan", "bluetooth", etc).
+Values: 	See include/linux/rfkill.h.
+
+
+What:		/sys/class/rfkill/rfkill[0-9]+/persistent
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description: 	Whether the soft blocked state is initialised from non-volatile
+		storage at startup.
+Values: 	A numeric value:
+
+		- 0: false
+		- 1: true
+
+
+What:		/sys/class/rfkill/rfkill[0-9]+/state
+Date:		09-Jul-2007
+KernelVersion	v2.6.22
+Contact:	linux-wireless@vger.kernel.org
+Description: 	Current state of the transmitter.
+		This file was scheduled to be removed in 2014, but due to its
+		large number of users it will be sticking around for a bit
+		longer. Despite it being marked as stable, the newer "hard" and
+		"soft" interfaces should be preferred, since it is not possible
+		to express the 'soft and hard block' state of the rfkill driver
+		through this interface. There will likely be another attempt to
+		remove it in the future.
+Values: 	A numeric value.
+
+		0: RFKILL_STATE_SOFT_BLOCKED
+			transmitter is turned off by software
+		1: RFKILL_STATE_UNBLOCKED
+			transmitter is (potentially) active
+		2: RFKILL_STATE_HARD_BLOCKED
+			transmitter is forced off by something outside of
+			the driver's control.
+
+
+What:		/sys/class/rfkill/rfkill[0-9]+/hard
+Date:		12-March-2010
+KernelVersion	v2.6.34
+Contact:	linux-wireless@vger.kernel.org
+Description: 	Current hardblock state. This file is read only.
+Values: 	A numeric value.
+
+		0: inactive
+			The transmitter is (potentially) active.
+		1: active
+			The transmitter is forced off by something outside of
+			the driver's control.
+
+
+What:		/sys/class/rfkill/rfkill[0-9]+/soft
+Date:		12-March-2010
+KernelVersion	v2.6.34
+Contact:	linux-wireless@vger.kernel.org
+Description:	Current softblock state. This file is read and write.
+Values: 	A numeric value.
+
+		0: inactive
+			The transmitter is (potentially) active.
+
+		1: active
+			The transmitter is turned off by software.
diff --git a/Documentation/ABI/stable/sysfs-class-tpm b/Documentation/ABI/stable/sysfs-class-tpm
new file mode 100644
index 000000000..91ca63ec7
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-class-tpm
@@ -0,0 +1,196 @@
+What:		/sys/class/tpm/tpmX/device/
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	linux-integrity@vger.kernel.org
+Description:	The device/ directory under a specific TPM instance exposes
+		the properties of that TPM chip
+
+
+What:		/sys/class/tpm/tpmX/device/active
+Date:		April 2006
+KernelVersion:	2.6.17
+Contact:	linux-integrity@vger.kernel.org
+Description:	The "active" property prints a '1' if the TPM chip is accepting
+		commands. An inactive TPM chip still contains all the state of
+		an active chip (Storage Root Key, NVRAM, etc), and can be
+		visible to the OS, but will only accept a restricted set of
+		commands. See the TPM Main Specification part 2, Structures,
+		section 17 for more information on which commands are
+		available.
+
+What:		/sys/class/tpm/tpmX/device/cancel
+Date:		June 2005
+KernelVersion:	2.6.13
+Contact:	linux-integrity@vger.kernel.org
+Description:	The "cancel" property allows you to cancel the currently
+		pending TPM command. Writing any value to cancel will call the
+		TPM vendor specific cancel operation.
+
+What:		/sys/class/tpm/tpmX/device/caps
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	linux-integrity@vger.kernel.org
+Description:	The "caps" property contains TPM manufacturer and version info.
+
+		Example output::
+
+		  Manufacturer: 0x53544d20
+		  TCG version: 1.2
+		  Firmware version: 8.16
+
+		Manufacturer is a hex dump of the 4 byte manufacturer info
+		space in a TPM. TCG version shows the TCG TPM spec level that
+		the chip supports. Firmware version is that of the chip and
+		is manufacturer specific.
+
+What:		/sys/class/tpm/tpmX/device/durations
+Date:		March 2011
+KernelVersion:	3.1
+Contact:	linux-integrity@vger.kernel.org
+Description:	The "durations" property shows the 3 vendor-specific values
+		used to wait for a short, medium and long TPM command. All
+		TPM commands are categorized as short, medium or long in
+		execution time, so that the driver doesn't have to wait
+		any longer than necessary before starting to poll for a
+		result.
+
+		Example output::
+
+		  3015000 4508000 180995000 [original]
+
+		Here the short, medium and long durations are displayed in
+		usecs. "[original]" indicates that the values are displayed
+		unmodified from when they were queried from the chip.
+		Durations can be modified in the case where a buggy chip
+		reports them in msec instead of usec and they need to be
+		scaled to be displayed in usecs. In this case "[adjusted]"
+		will be displayed in place of "[original]".
+
+What:		/sys/class/tpm/tpmX/device/enabled
+Date:		April 2006
+KernelVersion:	2.6.17
+Contact:	linux-integrity@vger.kernel.org
+Description:	The "enabled" property prints a '1' if the TPM chip is enabled,
+		meaning that it should be visible to the OS. This property
+		may be visible but produce a '0' after some operation that
+		disables the TPM.
+
+What:		/sys/class/tpm/tpmX/device/owned
+Date:		April 2006
+KernelVersion:	2.6.17
+Contact:	linux-integrity@vger.kernel.org
+Description:	The "owned" property produces a '1' if the TPM_TakeOwnership
+		ordinal has been executed successfully in the chip. A '0'
+		indicates that ownership hasn't been taken.
+
+What:		/sys/class/tpm/tpmX/device/pcrs
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	linux-integrity@vger.kernel.org
+Description:	The "pcrs" property will dump the current value of all Platform
+		Configuration Registers in the TPM. Note that since these
+		values may be constantly changing, the output is only valid
+		for a snapshot in time.
+
+		Example output::
+
+		  PCR-00: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		  PCR-01: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		  PCR-02: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		  PCR-03: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		  PCR-04: 3A 3F 78 0F 11 A4 B4 99 69 FC AA 80 CD 6E 39 57 C3 3B 22 75
+		  ...
+
+		The number of PCRs and hex bytes needed to represent a PCR
+		value will vary depending on TPM chip version. For TPM 1.1 and
+		1.2 chips, PCRs represent SHA-1 hashes, which are 20 bytes
+		long. Use the "caps" property to determine TPM version.
+
+What:		/sys/class/tpm/tpmX/device/pubek
+Date:		April 2005
+KernelVersion:	2.6.12
+Contact:	linux-integrity@vger.kernel.org
+Description:	The "pubek" property will return the TPM's public endorsement
+		key if possible. If the TPM has had ownership established and
+		is version 1.2, the pubek will not be available without the
+		owner's authorization. Since the TPM driver doesn't store any
+		secrets, it can't authorize its own request for the pubek,
+		making it unaccessible. The public endorsement key is gener-
+		ated at TPM manufacture time and exists for the life of the
+		chip.
+
+		Example output::
+
+		  Algorithm: 00 00 00 01
+		  Encscheme: 00 03
+		  Sigscheme: 00 01
+		  Parameters: 00 00 08 00 00 00 00 02 00 00 00 00
+		  Modulus length: 256
+		  Modulus:
+		  B4 76 41 82 C9 20 2C 10 18 40 BC 8B E5 44 4C 6C
+		  3A B2 92 0C A4 9B 2A 83 EB 5C 12 85 04 48 A0 B6
+		  1E E4 81 84 CE B2 F2 45 1C F0 85 99 61 02 4D EB
+		  86 C4 F7 F3 29 60 52 93 6B B2 E5 AB 8B A9 09 E3
+		  D7 0E 7D CA 41 BF 43 07 65 86 3C 8C 13 7A D0 8B
+		  82 5E 96 0B F8 1F 5F 34 06 DA A2 52 C1 A9 D5 26
+		  0F F4 04 4B D9 3F 2D F2 AC 2F 74 64 1F 8B CD 3E
+		  1E 30 38 6C 70 63 69 AB E2 50 DF 49 05 2E E1 8D
+		  6F 78 44 DA 57 43 69 EE 76 6C 38 8A E9 8E A3 F0
+		  A7 1F 3C A8 D0 12 15 3E CA 0E BD FA 24 CD 33 C6
+		  47 AE A4 18 83 8E 22 39 75 93 86 E6 FD 66 48 B6
+		  10 AD 94 14 65 F9 6A 17 78 BD 16 53 84 30 BF 70
+		  E0 DC 65 FD 3C C6 B0 1E BF B9 C1 B5 6C EF B1 3A
+		  F8 28 05 83 62 26 11 DC B4 6B 5A 97 FF 32 26 B6
+		  F7 02 71 CF 15 AE 16 DD D1 C1 8E A8 CF 9B 50 7B
+		  C3 91 FF 44 1E CF 7C 39 FE 17 77 21 20 BD CE 9B
+
+		Possible values::
+
+		  Algorithm:	TPM_ALG_RSA			(1)
+		  Encscheme:	TPM_ES_RSAESPKCSv15		(2)
+				TPM_ES_RSAESOAEP_SHA1_MGF1	(3)
+		  Sigscheme:	TPM_SS_NONE			(1)
+		  Parameters, a byte string of 3 u32 values:
+			Key Length (bits):	00 00 08 00	(2048)
+			Num primes:		00 00 00 02	(2)
+			Exponent Size:		00 00 00 00	(0 means the
+								 default exp)
+		  Modulus Length: 256 (bytes)
+		  Modulus:	The 256 byte Endorsement Key modulus
+
+What:		/sys/class/tpm/tpmX/device/temp_deactivated
+Date:		April 2006
+KernelVersion:	2.6.17
+Contact:	linux-integrity@vger.kernel.org
+Description:	The "temp_deactivated" property returns a '1' if the chip has
+		been temporarily deactivated, usually until the next power
+		cycle. Whether a warm boot (reboot) will clear a TPM chip
+		from a temp_deactivated state is platform specific.
+
+What:		/sys/class/tpm/tpmX/device/timeouts
+Date:		March 2011
+KernelVersion:	3.1
+Contact:	linux-integrity@vger.kernel.org
+Description:	The "timeouts" property shows the 4 vendor-specific values
+		for the TPM's interface spec timeouts. The use of these
+		timeouts is defined by the TPM interface spec that the chip
+		conforms to.
+
+		Example output::
+
+		  750000 750000 750000 750000 [original]
+
+		The four timeout values are shown in usecs, with a trailing
+		"[original]" or "[adjusted]" depending on whether the values
+		were scaled by the driver to be reported in usec from msecs.
+
+What:		/sys/class/tpm/tpmX/tpm_version_major
+Date:		October 2019
+KernelVersion:	5.5
+Contact:	linux-integrity@vger.kernel.org
+Description:	The "tpm_version_major" property shows the TCG spec major version
+		implemented by the TPM device.
+
+		Example output::
+
+		  2
diff --git a/Documentation/ABI/stable/sysfs-class-ubi b/Documentation/ABI/stable/sysfs-class-ubi
new file mode 100644
index 000000000..a6b324014
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-class-ubi
@@ -0,0 +1,221 @@
+What:		/sys/class/ubi/
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		The ubi/ class sub-directory belongs to the UBI subsystem and
+		provides general UBI information, per-UBI device information
+		and per-UBI volume information.
+
+What:		/sys/class/ubi/version
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		This file contains version of the latest supported UBI on-media
+		format. Currently it is 1, and there is no plan to change this.
+		However, if in the future UBI needs on-flash format changes
+		which cannot be done in a compatible manner, a new format
+		version will be added. So this is a mechanism for possible
+		future backward-compatible (but forward-incompatible)
+		improvements.
+
+What:		/sys/class/ubiX/
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		The /sys/class/ubi0, /sys/class/ubi1, etc directories describe
+		UBI devices (UBI device 0, 1, etc). They contain general UBI
+		device information and per UBI volume information (each UBI
+		device may have many UBI volumes)
+
+What:		/sys/class/ubi/ubiX/avail_eraseblocks
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Amount of available logical eraseblock. For example, one may
+		create a new UBI volume which has this amount of logical
+		eraseblocks.
+
+What:		/sys/class/ubi/ubiX/bad_peb_count
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Count of bad physical eraseblocks on the underlying MTD device.
+
+What:		/sys/class/ubi/ubiX/bgt_enabled
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Contains ASCII "0\n" if the UBI background thread is disabled,
+		and ASCII "1\n" if it is enabled.
+
+What:		/sys/class/ubi/ubiX/dev
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Major and minor numbers of the character device corresponding
+		to this UBI device (in <major>:<minor> format).
+
+What:		/sys/class/ubi/ubiX/eraseblock_size
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Maximum logical eraseblock size this UBI device may provide. UBI
+		volumes may have smaller logical eraseblock size because of their
+		alignment.
+
+What:		/sys/class/ubi/ubiX/max_ec
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Maximum physical eraseblock erase counter value.
+
+What:		/sys/class/ubi/ubiX/max_vol_count
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Maximum number of volumes which this UBI device may have.
+
+What:		/sys/class/ubi/ubiX/min_io_size
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Minimum input/output unit size. All the I/O may only be done
+		in fractions of the contained number.
+
+What:		/sys/class/ubi/ubiX/mtd_num
+Date:		January 2008
+KernelVersion:	2.6.25
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Number of the underlying MTD device.
+
+What:		/sys/class/ubi/ubiX/reserved_for_bad
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Number of physical eraseblocks reserved for bad block handling.
+
+What:		/sys/class/ubi/ubiX/ro_mode
+Date:		April 2016
+KernelVersion:	4.7
+Contact:	linux-mtd@lists.infradead.org
+Description:
+		Contains ASCII "1\n" if the read-only flag is set on this
+		device, and "0\n" if it is cleared. UBI devices mark themselves
+		as read-only when they detect an unrecoverable error.
+
+What:		/sys/class/ubi/ubiX/total_eraseblocks
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Total number of good (not marked as bad) physical eraseblocks on
+		the underlying MTD device.
+
+What:		/sys/class/ubi/ubiX/volumes_count
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Count of volumes on this UBI device.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		The /sys/class/ubi/ubiX/ubiX_0/, /sys/class/ubi/ubiX/ubiX_1/,
+		etc directories describe UBI volumes on UBI device X (volumes
+		0, 1, etc).
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/alignment
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Volume alignment - the value the logical eraseblock size of
+		this volume has to be aligned on. For example, 2048 means that
+		logical eraseblock size is multiple of 2048. In other words,
+		volume logical eraseblock size is UBI device logical eraseblock
+		size aligned to the alignment value.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/corrupted
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Contains ASCII "0\n" if the UBI volume is OK, and ASCII "1\n"
+		if it is corrupted (e.g., due to an interrupted volume update).
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/data_bytes
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		The amount of data this volume contains. This value makes sense
+		only for static volumes, and for dynamic volume it equivalent
+		to the total volume size in bytes.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/dev
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Major and minor numbers of the character device corresponding
+		to this UBI volume (in <major>:<minor> format).
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/name
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Volume name.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/reserved_ebs
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Count of physical eraseblock reserved for this volume.
+		Equivalent to the volume size in logical eraseblocks.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/type
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Volume type. Contains ASCII "dynamic\n" for dynamic volumes and
+		"static\n" for static volumes.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/upd_marker
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Contains ASCII "0\n" if the update marker is not set for this
+		volume, and "1\n" if it is set. The update marker is set when
+		volume update starts, and cleaned when it ends. So the presence
+		of the update marker indicates that the volume is being updated
+		at the moment of the update was interrupted. The later may be
+		checked using the "corrupted" sysfs file.
+
+What:		/sys/class/ubi/ubiX/ubiX_Y/usable_eb_size
+Date:		July 2006
+KernelVersion:	2.6.22
+Contact:	Artem Bityutskiy <dedekind@infradead.org>
+Description:
+		Logical eraseblock size of this volume. Equivalent to logical
+		eraseblock size of the device aligned on the volume alignment
+		value.
diff --git a/Documentation/ABI/stable/sysfs-class-udc b/Documentation/ABI/stable/sysfs-class-udc
new file mode 100644
index 000000000..d1e2f3ec1
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-class-udc
@@ -0,0 +1,93 @@
+What:		/sys/class/udc/<udc>/a_alt_hnp_support
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <balbi@kernel.org>
+Description:
+		Indicates if an OTG A-Host supports HNP at an alternate port.
+Users:
+
+What:		/sys/class/udc/<udc>/a_hnp_support
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <balbi@kernel.org>
+Description:
+		Indicates if an OTG A-Host supports HNP at this port.
+Users:
+
+What:		/sys/class/udc/<udc>/b_hnp_enable
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <balbi@kernel.org>
+Description:
+		Indicates if an OTG A-Host enabled HNP support.
+Users:
+
+What:		/sys/class/udc/<udc>/current_speed
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <balbi@kernel.org>
+Description:
+		Indicates the current negotiated speed at this port.
+Users:
+
+What:		/sys/class/udc/<udc>/is_a_peripheral
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <balbi@kernel.org>
+Description:
+		Indicates that this port is the default Host on an OTG session
+		but HNP was used to switch roles.
+Users:
+
+What:		/sys/class/udc/<udc>/is_otg
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <balbi@kernel.org>
+Description:
+		Indicates that this port support OTG.
+Users:
+
+What:		/sys/class/udc/<udc>/maximum_speed
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <balbi@kernel.org>
+Description:
+		Indicates the maximum USB speed supported by this port.
+Users:
+
+What:		/sys/class/udc/<udc>/soft_connect
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <balbi@kernel.org>
+Description:
+		Allows users to disconnect data pullup resistors thus causing a
+		logical disconnection from the USB Host.
+Users:
+
+What:		/sys/class/udc/<udc>/srp
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <balbi@kernel.org>
+Description:
+		Allows users to manually start Session Request Protocol.
+Users:
+
+What:		/sys/class/udc/<udc>/state
+Date:		June 2011
+KernelVersion:	3.1
+Contact:	Felipe Balbi <balbi@kernel.org>
+Description:
+		Indicates current state of the USB Device Controller. Valid
+		states are: 'not-attached', 'attached', 'powered',
+		'reconnecting', 'unauthenticated', 'default', 'addressed',
+		'configured', and 'suspended'; however not all USB Device
+		Controllers support reporting all states.
+Users:
+
+What:		/sys/class/udc/<udc>/function
+Date:		June 2017
+KernelVersion:	4.13
+Contact:	Felipe Balbi <balbi@kernel.org>
+Description:
+		Prints out name of currently running USB Gadget Driver.
+Users:
diff --git a/Documentation/ABI/stable/sysfs-devices b/Documentation/ABI/stable/sysfs-devices
new file mode 100644
index 000000000..42bf1eab5
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-devices
@@ -0,0 +1,25 @@
+Note:
+  This documents additional properties of any device beyond what
+  is documented in Documentation/admin-guide/sysfs-rules.rst
+
+What:		/sys/devices/*/of_node
+Date:		February 2015
+Contact:	Device Tree mailing list <devicetree@vger.kernel.org>
+Description:
+		Any device associated with a device-tree node will have
+		an of_path symlink pointing to the corresponding device
+		node in /sys/firmware/devicetree/
+
+What:		/sys/devices/*/devspec
+Date:		October 2016
+Contact:	Device Tree mailing list <devicetree@vger.kernel.org>
+Description:
+		If CONFIG_OF is enabled, then this file is present. When
+		read, it returns full name of the device node.
+
+What:		/sys/devices/*/obppath
+Date:		October 2016
+Contact:	Device Tree mailing list <devicetree@vger.kernel.org>
+Description:
+		If CONFIG_OF is enabled, then this file is present. When
+		read, it returns full name of the device node.
diff --git a/Documentation/ABI/stable/sysfs-devices-node b/Documentation/ABI/stable/sysfs-devices-node
new file mode 100644
index 000000000..484fc04bc
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-devices-node
@@ -0,0 +1,178 @@
+What:		/sys/devices/system/node/possible
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that could be possibly become online at some point.
+
+What:		/sys/devices/system/node/online
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that are online.
+
+What:		/sys/devices/system/node/has_normal_memory
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that have regular memory.
+
+What:		/sys/devices/system/node/has_cpu
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that have one or more CPUs.
+
+What:		/sys/devices/system/node/has_high_memory
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Nodes that have regular or high memory.
+		Depends on CONFIG_HIGHMEM.
+
+What:		/sys/devices/system/node/nodeX
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		When CONFIG_NUMA is enabled, this is a directory containing
+		information on node X such as what CPUs are local to the
+		node. Each file is detailed next.
+
+What:		/sys/devices/system/node/nodeX/cpumap
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		The node's cpumap.
+
+What:		/sys/devices/system/node/nodeX/cpulist
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		The CPUs associated to the node.
+
+What:		/sys/devices/system/node/nodeX/meminfo
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Provides information about the node's distribution and memory
+		utilization. Similar to /proc/meminfo, see Documentation/filesystems/proc.rst
+
+What:		/sys/devices/system/node/nodeX/numastat
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		The node's hit/miss statistics, in units of pages.
+		See Documentation/admin-guide/numastat.rst
+
+What:		/sys/devices/system/node/nodeX/distance
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		Distance between the node and all the other nodes
+		in the system.
+
+What:		/sys/devices/system/node/nodeX/vmstat
+Date:		October 2002
+Contact:	Linux Memory Management list <linux-mm@kvack.org>
+Description:
+		The node's zoned virtual memory statistics.
+		This is a superset of numastat.
+
+What:		/sys/devices/system/node/nodeX/compact
+Date:		February 2010
+Contact:	Mel Gorman <mel@csn.ul.ie>
+Description:
+		When this file is written to, all memory within that node
+		will be compacted. When it completes, memory will be freed
+		into blocks which have as many contiguous pages as possible
+
+What:		/sys/devices/system/node/nodeX/hugepages/hugepages-<size>/
+Date:		December 2009
+Contact:	Lee Schermerhorn <lee.schermerhorn@hp.com>
+Description:
+		The node's huge page size control/query attributes.
+		See Documentation/admin-guide/mm/hugetlbpage.rst
+
+What:		/sys/devices/system/node/nodeX/accessY/
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		The node's relationship to other nodes for access class "Y".
+
+What:		/sys/devices/system/node/nodeX/accessY/initiators/
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		The directory containing symlinks to memory initiator
+		nodes that have class "Y" access to this target node's
+		memory. CPUs and other memory initiators in nodes not in
+		the list accessing this node's memory may have different
+		performance.
+
+What:		/sys/devices/system/node/nodeX/accessY/targets/
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		The directory containing symlinks to memory targets that
+		this initiator node has class "Y" access.
+
+What:		/sys/devices/system/node/nodeX/accessY/initiators/read_bandwidth
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		This node's read bandwidth in MB/s when accessed from
+		nodes found in this access class's linked initiators.
+
+What:		/sys/devices/system/node/nodeX/accessY/initiators/read_latency
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		This node's read latency in nanoseconds when accessed
+		from nodes found in this access class's linked initiators.
+
+What:		/sys/devices/system/node/nodeX/accessY/initiators/write_bandwidth
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		This node's write bandwidth in MB/s when accessed from
+		found in this access class's linked initiators.
+
+What:		/sys/devices/system/node/nodeX/accessY/initiators/write_latency
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		This node's write latency in nanoseconds when access
+		from nodes found in this class's linked initiators.
+
+What:		/sys/devices/system/node/nodeX/memory_side_cache/indexY/
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		The directory containing attributes for the memory-side cache
+		level 'Y'.
+
+What:		/sys/devices/system/node/nodeX/memory_side_cache/indexY/indexing
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		The caches associativity indexing: 0 for direct mapped,
+		non-zero if indexed.
+
+What:		/sys/devices/system/node/nodeX/memory_side_cache/indexY/line_size
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		The number of bytes accessed from the next cache level on a
+		cache miss.
+
+What:		/sys/devices/system/node/nodeX/memory_side_cache/indexY/size
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		The size of this memory side cache in bytes.
+
+What:		/sys/devices/system/node/nodeX/memory_side_cache/indexY/write_policy
+Date:		December 2018
+Contact:	Keith Busch <keith.busch@intel.com>
+Description:
+		The cache write policy: 0 for write-back, 1 for write-through,
+		other or unknown.
diff --git a/Documentation/ABI/stable/sysfs-devices-system-cpu b/Documentation/ABI/stable/sysfs-devices-system-cpu
new file mode 100644
index 000000000..33c133e2a
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-devices-system-cpu
@@ -0,0 +1,25 @@
+What: 		/sys/devices/system/cpu/dscr_default
+Date:		13-May-2014
+KernelVersion:	v3.15.0
+Contact:
+Description:	Writes are equivalent to writing to
+		/sys/devices/system/cpu/cpuN/dscr on all CPUs.
+		Reads return the last written value or 0.
+		This value is not a global default: it is a way to set
+		all per-CPU defaults at the same time.
+Values:		64 bit unsigned integer (bit field)
+
+What: 		/sys/devices/system/cpu/cpu[0-9]+/dscr
+Date:		13-May-2014
+KernelVersion:	v3.15.0
+Contact:
+Description:	Default value for the Data Stream Control Register (DSCR) on
+		a CPU.
+		This default value is used when the kernel is executing and
+		for any process that has not set the DSCR itself.
+		If a process ever sets the DSCR (via direct access to the
+		SPR) that value will be persisted for that process and used
+		on any CPU where it executes (overriding the value described
+		here).
+		If set by a process it will be inherited by child processes.
+Values:		64 bit unsigned integer (bit field)
diff --git a/Documentation/ABI/stable/sysfs-devices-system-xen_memory b/Documentation/ABI/stable/sysfs-devices-system-xen_memory
new file mode 100644
index 000000000..6d83f95a8
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-devices-system-xen_memory
@@ -0,0 +1,86 @@
+What:		/sys/devices/system/xen_memory/xen_memory0/max_retry_count
+Date:		May 2011
+KernelVersion:	2.6.39
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The maximum number of times the balloon driver will
+		attempt to increase the balloon before giving up.  See
+		also 'retry_count' below.
+		A value of zero means retry forever and is the default one.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/max_schedule_delay
+Date:		May 2011
+KernelVersion:	2.6.39
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The limit that 'schedule_delay' (see below) will be
+		increased to. The default value is 32 seconds.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/retry_count
+Date:		May 2011
+KernelVersion:	2.6.39
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The current number of times that the balloon driver
+		has attempted to increase the size of the balloon.
+		The default value is one. With max_retry_count being
+		zero (unlimited), this means that the driver will attempt
+		to retry with a 'schedule_delay' delay.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/schedule_delay
+Date:		May 2011
+KernelVersion:	2.6.39
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The time (in seconds) to wait between attempts to
+		increase the balloon.  Each time the balloon cannot be
+		increased, 'schedule_delay' is increased (until
+		'max_schedule_delay' is reached at which point it
+		will use the max value).
+
+What:		/sys/devices/system/xen_memory/xen_memory0/target
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		The target number of pages to adjust this domain's
+		memory reservation to.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/target_kb
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		As target above, except the value is in KiB.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/info/current_kb
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		Current size (in KiB) of this domain's memory
+		reservation.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/info/high_kb
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		Amount (in KiB) of high memory in the balloon.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/info/low_kb
+Date:		April 2008
+KernelVersion:	2.6.26
+Contact:	Konrad Rzeszutek Wilk <konrad.wilk@oracle.com>
+Description:
+		Amount (in KiB) of low (or normal) memory in the
+		balloon.
+
+What:		/sys/devices/system/xen_memory/xen_memory0/scrub_pages
+Date:		September 2018
+KernelVersion:	4.20
+Contact:	xen-devel@lists.xenproject.org
+Description:
+		Control scrubbing pages before returning them to Xen for others domains
+		use. Can be set with xen_scrub_pages cmdline
+		parameter. Default value controlled with CONFIG_XEN_SCRUB_PAGES_DEFAULT.
diff --git a/Documentation/ABI/stable/sysfs-driver-aspeed-vuart b/Documentation/ABI/stable/sysfs-driver-aspeed-vuart
new file mode 100644
index 000000000..950cafc94
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-aspeed-vuart
@@ -0,0 +1,24 @@
+What:		/sys/bus/platform/drivers/aspeed-vuart/*/lpc_address
+Date:		April 2017
+Contact:	Jeremy Kerr <jk@ozlabs.org>
+Description:	Configures which IO port the host side of the UART
+		will appear on the host <-> BMC LPC bus.
+Users:		OpenBMC.  Proposed changes should be mailed to
+		openbmc@lists.ozlabs.org
+
+What:		/sys/bus/platform/drivers/aspeed-vuart/*/sirq
+Date:		April 2017
+Contact:	Jeremy Kerr <jk@ozlabs.org>
+Description:	Configures which interrupt number the host side of
+		the UART will appear on the host <-> BMC LPC bus.
+Users:		OpenBMC.  Proposed changes should be mailed to
+		openbmc@lists.ozlabs.org
+
+What:		/sys/bus/platform/drivers/aspeed-vuart/*/sirq_polarity
+Date:		July 2019
+Contact:	Oskar Senft <osk@google.com>
+Description:	Configures the polarity of the serial interrupt to the
+		host via the BMC LPC bus.
+		Set to 0 for active-low or 1 for active-high.
+Users:		OpenBMC.  Proposed changes should be mailed to
+		openbmc@lists.ozlabs.org
diff --git a/Documentation/ABI/stable/sysfs-driver-dma-idxd b/Documentation/ABI/stable/sysfs-driver-dma-idxd
new file mode 100644
index 000000000..b44183880
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-dma-idxd
@@ -0,0 +1,197 @@
+What:		/sys/bus/dsa/devices/dsa<m>/version
+Date:		Apr 15, 2020
+KernelVersion:	5.8.0
+Contact:	dmaengine@vger.kernel.org
+Description:	The hardware version number.
+
+What:           /sys/bus/dsa/devices/dsa<m>/cdev_major
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:	The major number that the character device driver assigned to
+		this device.
+
+What:           /sys/bus/dsa/devices/dsa<m>/errors
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The error information for this device.
+
+What:           /sys/bus/dsa/devices/dsa<m>/max_batch_size
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The largest number of work descriptors in a batch.
+
+What:           /sys/bus/dsa/devices/dsa<m>/max_work_queues_size
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The maximum work queue size supported by this device.
+
+What:           /sys/bus/dsa/devices/dsa<m>/max_engines
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The maximum number of engines supported by this device.
+
+What:           /sys/bus/dsa/devices/dsa<m>/max_groups
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The maximum number of groups can be created under this device.
+
+What:           /sys/bus/dsa/devices/dsa<m>/max_tokens
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The total number of bandwidth tokens supported by this device.
+		The bandwidth tokens represent resources within the DSA
+		implementation, and these resources are allocated by engines to
+		support operations.
+
+What:           /sys/bus/dsa/devices/dsa<m>/max_transfer_size
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The number of bytes to be read from the source address to
+		perform the operation. The maximum transfer size is dependent on
+		the workqueue the descriptor was submitted to.
+
+What:           /sys/bus/dsa/devices/dsa<m>/max_work_queues
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The maximum work queue number that this device supports.
+
+What:           /sys/bus/dsa/devices/dsa<m>/numa_node
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The numa node number for this device.
+
+What:           /sys/bus/dsa/devices/dsa<m>/op_cap
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The operation capability bit mask specify the operation types
+		supported by the this device.
+
+What:           /sys/bus/dsa/devices/dsa<m>/state
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The state information of this device. It can be either enabled
+		or disabled.
+
+What:           /sys/bus/dsa/devices/dsa<m>/group<m>.<n>
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The assigned group under this device.
+
+What:           /sys/bus/dsa/devices/dsa<m>/engine<m>.<n>
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The assigned engine under this device.
+
+What:           /sys/bus/dsa/devices/dsa<m>/wq<m>.<n>
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The assigned work queue under this device.
+
+What:           /sys/bus/dsa/devices/dsa<m>/configurable
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    To indicate if this device is configurable or not.
+
+What:           /sys/bus/dsa/devices/dsa<m>/token_limit
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The maximum number of bandwidth tokens that may be in use at
+		one time by operations that access low bandwidth memory in the
+		device.
+
+What:		/sys/bus/dsa/devices/dsa<m>/cmd_status
+Date:		Aug 28, 2020
+KernelVersion:	5.10.0
+Contact:	dmaengine@vger.kernel.org
+Description:	The last executed device administrative command's status/error.
+
+What:           /sys/bus/dsa/devices/wq<m>.<n>/group_id
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The group id that this work queue belongs to.
+
+What:           /sys/bus/dsa/devices/wq<m>.<n>/size
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The work queue size for this work queue.
+
+What:           /sys/bus/dsa/devices/wq<m>.<n>/type
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The type of this work queue, it can be "kernel" type for work
+		queue usages in the kernel space or "user" type for work queue
+		usages by applications in user space.
+
+What:           /sys/bus/dsa/devices/wq<m>.<n>/cdev_minor
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The minor number assigned to this work queue by the character
+		device driver.
+
+What:           /sys/bus/dsa/devices/wq<m>.<n>/mode
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The work queue mode type for this work queue.
+
+What:           /sys/bus/dsa/devices/wq<m>.<n>/priority
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The priority value of this work queue, it is a vlue relative to
+		other work queue in the same group to control quality of service
+		for dispatching work from multiple workqueues in the same group.
+
+What:           /sys/bus/dsa/devices/wq<m>.<n>/state
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The current state of the work queue.
+
+What:           /sys/bus/dsa/devices/wq<m>.<n>/threshold
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The number of entries in this work queue that may be filled
+		via a limited portal.
+
+What:		/sys/bus/dsa/devices/wq<m>.<n>/max_transfer_size
+Date:		Aug 28, 2020
+KernelVersion:	5.10.0
+Contact:	dmaengine@vger.kernel.org
+Description:	The max transfer sized for this workqueue. Cannot exceed device
+		max transfer size. Configurable parameter.
+
+What:		/sys/bus/dsa/devices/wq<m>.<n>/max_batch_size
+Date:		Aug 28, 2020
+KernelVersion:	5.10.0
+Contact:	dmaengine@vger.kernel.org
+Description:	The max batch size for this workqueue. Cannot exceed device
+		max batch size. Configurable parameter.
+
+What:           /sys/bus/dsa/devices/engine<m>.<n>/group_id
+Date:           Oct 25, 2019
+KernelVersion:  5.6.0
+Contact:        dmaengine@vger.kernel.org
+Description:    The group that this engine belongs to.
diff --git a/Documentation/ABI/stable/sysfs-driver-dma-ioatdma b/Documentation/ABI/stable/sysfs-driver-dma-ioatdma
new file mode 100644
index 000000000..3a4e2cd0d
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-dma-ioatdma
@@ -0,0 +1,30 @@
+What:           /sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/cap
+Date:           December 3, 2009
+KernelVersion:  2.6.32
+Contact:        dmaengine@vger.kernel.org
+Description:	Capabilities the DMA supports.Currently there are DMA_PQ, DMA_PQ_VAL,
+		DMA_XOR,DMA_XOR_VAL,DMA_INTERRUPT.
+
+What:           /sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_active
+Date:           December 3, 2009
+KernelVersion:  2.6.32
+Contact:        dmaengine@vger.kernel.org
+Description:	The number of descriptors active in the ring.
+
+What:           /sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/ring_size
+Date:           December 3, 2009
+KernelVersion:  2.6.32
+Contact:        dmaengine@vger.kernel.org
+Description:	Descriptor ring size, total number of descriptors available.
+
+What:           /sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/version
+Date:           December 3, 2009
+KernelVersion:  2.6.32
+Contact:        dmaengine@vger.kernel.org
+Description:	Version of ioatdma device.
+
+What:           /sys/devices/pciXXXX:XX/0000:XX:XX.X/dma/dma<n>chan<n>/quickdata/intr_coalesce
+Date:           August 8, 2017
+KernelVersion:  4.14
+Contact:        dmaengine@vger.kernel.org
+Description:	Tune-able interrupt delay value per channel basis.
diff --git a/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
new file mode 100644
index 000000000..f5724bb5b
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
@@ -0,0 +1,115 @@
+What:		/sys/devices/platform/firmware\:zynqmp-firmware/ggs*
+Date:		March 2020
+KernelVersion:	5.6
+Contact:	"Jolly Shah" <jollys@xilinx.com>
+Description:
+		Read/Write PMU global general storage register value,
+		GLOBAL_GEN_STORAGE{0:3}.
+		Global general storage register that can be used
+		by system to pass information between masters.
+
+		The register is reset during system or power-on
+		resets. Three registers are used by the FSBL and
+		other Xilinx software products: GLOBAL_GEN_STORAGE{4:6}.
+
+		Usage::
+
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+		    # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+
+		Example::
+
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+		    # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/ggs0
+
+Users:		Xilinx
+
+What:		/sys/devices/platform/firmware\:zynqmp-firmware/pggs*
+Date:		March 2020
+KernelVersion:	5.6
+Contact:	"Jolly Shah" <jollys@xilinx.com>
+Description:
+		Read/Write PMU persistent global general storage register
+		value, PERS_GLOB_GEN_STORAGE{0:3}.
+		Persistent global general storage register that
+		can be used by system to pass information between
+		masters.
+
+		This register is only reset by the power-on reset
+		and maintains its value through a system reset.
+		Four registers are used by the FSBL and other Xilinx
+		software products: PERS_GLOB_GEN_STORAGE{4:7}.
+		Register is reset only by a POR reset.
+
+		Usage::
+
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+		    # echo <value> > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+
+		Example::
+
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+		    # echo 0x1234ABCD > /sys/devices/platform/firmware\:zynqmp-firmware/pggs0
+
+Users:		Xilinx
+
+What:		/sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+Date:		March 2020
+KernelVersion:	5.6
+Contact:	"Jolly Shah" <jollys@xilinx.com>
+Description:
+		This sysfs interface allows to set the shutdown scope for the
+		next shutdown request. When the next shutdown is performed, the
+		platform specific portion of PSCI-system_off can use the chosen
+		shutdown scope.
+
+		Following are available shutdown scopes(subtypes):
+
+		subsystem:
+				Only the APU along with all of its peripherals
+				not used by other processing units will be
+				shut down. This may result in the FPD power
+				domain being shut down provided that no other
+				processing unit uses FPD peripherals or DRAM.
+		ps_only:
+				The complete PS will be shut down, including the
+				RPU, PMU, etc.  Only the PL domain (FPGA)
+				remains untouched.
+		system:
+				The complete system/device is shut down.
+
+		Usage::
+
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+		    # echo <scope> > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+
+		Example::
+
+		    # cat /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+		    # echo "subsystem" > /sys/devices/platform/firmware\:zynqmp-firmware/shutdown_scope
+
+Users:		Xilinx
+
+What:		/sys/devices/platform/firmware\:zynqmp-firmware/health_status
+Date:		March 2020
+KernelVersion:	5.6
+Contact:	"Jolly Shah" <jollys@xilinx.com>
+Description:
+		This sysfs interface allows to set the health status. If PMUFW
+		is compiled with CHECK_HEALTHY_BOOT, it will check the healthy
+		bit on FPD WDT expiration. If healthy bit is set by a user
+		application running in Linux, PMUFW will do APU only restart. If
+		healthy bit is not set during FPD WDT expiration, PMUFW will do
+		system restart.
+
+		Usage:
+
+		Set healthy bit::
+
+		    # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
+
+		Unset healthy bit::
+
+		    # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
+
+Users:		Xilinx
diff --git a/Documentation/ABI/stable/sysfs-driver-ib_srp b/Documentation/ABI/stable/sysfs-driver-ib_srp
new file mode 100644
index 000000000..bada15a32
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-ib_srp
@@ -0,0 +1,192 @@
+What:		/sys/class/infiniband_srp/srp-<hca>-<port_number>/add_target
+Date:		January 2, 2006
+KernelVersion:	2.6.15
+Contact:	linux-rdma@vger.kernel.org
+Description:	Interface for making ib_srp connect to a new target.
+		One can request ib_srp to connect to a new target by writing
+		a comma-separated list of login parameters to this sysfs
+		attribute. The supported parameters are:
+
+		* id_ext, a 16-digit hexadecimal number specifying the eight
+		  byte identifier extension in the 16-byte SRP target port
+		  identifier. The target port identifier is sent by ib_srp
+		  to the target in the SRP_LOGIN_REQ request.
+		* ioc_guid, a 16-digit hexadecimal number specifying the eight
+		  byte I/O controller GUID portion of the 16-byte target port
+		  identifier.
+		* dgid, a 32-digit hexadecimal number specifying the
+		  destination GID.
+		* pkey, a four-digit hexadecimal number specifying the
+		  InfiniBand partition key.
+		* service_id, a 16-digit hexadecimal number specifying the
+		  InfiniBand service ID used to establish communication with
+		  the SRP target. How to find out the value of the service ID
+		  is specified in the documentation of the SRP target.
+		* max_sect, a decimal number specifying the maximum number of
+		  512-byte sectors to be transferred via a single SCSI command.
+		* max_cmd_per_lun, a decimal number specifying the maximum
+		  number of outstanding commands for a single LUN.
+		* io_class, a hexadecimal number specifying the SRP I/O class.
+		  Must be either 0xff00 (rev 10) or 0x0100 (rev 16a). The I/O
+		  class defines the format of the SRP initiator and target
+		  port identifiers.
+		* initiator_ext, a 16-digit hexadecimal number specifying the
+		  identifier extension portion of the SRP initiator port
+		  identifier. This data is sent by the initiator to the target
+		  in the SRP_LOGIN_REQ request.
+		* cmd_sg_entries, a number in the range 1..255 that specifies
+		  the maximum number of data buffer descriptors stored in the
+		  SRP_CMD information unit itself. With allow_ext_sg=0 the
+		  parameter cmd_sg_entries defines the maximum S/G list length
+		  for a single SRP_CMD, and commands whose S/G list length
+		  exceeds this limit after S/G list collapsing will fail.
+		* allow_ext_sg, whether ib_srp is allowed to include a partial
+		  memory descriptor list in an SRP_CMD instead of the entire
+		  list. If a partial memory descriptor list has been included
+		  in an SRP_CMD the remaining memory descriptors are
+		  communicated from initiator to target via an additional RDMA
+		  transfer. Setting allow_ext_sg to 1 increases the maximum
+		  amount of data that can be transferred between initiator and
+		  target via a single SCSI command. Since not all SRP target
+		  implementations support partial memory descriptor lists the
+		  default value for this option is 0.
+		* sg_tablesize, a number in the range 1..2048 specifying the
+		  maximum S/G list length the SCSI layer is allowed to pass to
+		  ib_srp. Specifying a value that exceeds cmd_sg_entries is
+		  only safe with partial memory descriptor list support enabled
+		  (allow_ext_sg=1).
+		* comp_vector, a number in the range 0..n-1 specifying the
+		  MSI-X completion vector of the first RDMA channel. Some
+		  HCA's allocate multiple (n) MSI-X vectors per HCA port. If
+		  the IRQ affinity masks of these interrupts have been
+		  configured such that each MSI-X interrupt is handled by a
+		  different CPU then the comp_vector parameter can be used to
+		  spread the SRP completion workload over multiple CPU's.
+		* tl_retry_count, a number in the range 2..7 specifying the
+		  IB RC retry count.
+		* queue_size, the maximum number of commands that the
+		  initiator is allowed to queue per SCSI host. The default
+		  value for this parameter is 62. The lowest supported value
+		  is 2.
+		* max_it_iu_size, a decimal number specifying the maximum
+		  initiator to target information unit length.
+
+What:		/sys/class/infiniband_srp/srp-<hca>-<port_number>/ibdev
+Date:		January 2, 2006
+KernelVersion:	2.6.15
+Contact:	linux-rdma@vger.kernel.org
+Description:	HCA name (<hca>).
+
+What:		/sys/class/infiniband_srp/srp-<hca>-<port_number>/port
+Date:		January 2, 2006
+KernelVersion:	2.6.15
+Contact:	linux-rdma@vger.kernel.org
+Description:	HCA port number (<port_number>).
+
+What:		/sys/class/scsi_host/host<n>/allow_ext_sg
+Date:		May 19, 2011
+KernelVersion:	2.6.39
+Contact:	linux-rdma@vger.kernel.org
+Description:	Whether ib_srp is allowed to include a partial memory
+		descriptor list in an SRP_CMD when communicating with an SRP
+		target.
+
+What:		/sys/class/scsi_host/host<n>/ch_count
+Date:		April 1, 2015
+KernelVersion:	3.19
+Contact:	linux-rdma@vger.kernel.org
+Description:	Number of RDMA channels used for communication with the SRP
+		target.
+
+What:		/sys/class/scsi_host/host<n>/cmd_sg_entries
+Date:		May 19, 2011
+KernelVersion:	2.6.39
+Contact:	linux-rdma@vger.kernel.org
+Description:	Maximum number of data buffer descriptors that may be sent to
+		the target in a single SRP_CMD request.
+
+What:		/sys/class/scsi_host/host<n>/comp_vector
+Date:		September 2, 2013
+KernelVersion:	3.11
+Contact:	linux-rdma@vger.kernel.org
+Description:	Completion vector used for the first RDMA channel.
+
+What:		/sys/class/scsi_host/host<n>/dgid
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	InfiniBand destination GID used for communication with the SRP
+		target. Differs from orig_dgid if port redirection has happened.
+
+What:		/sys/class/scsi_host/host<n>/id_ext
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	Eight-byte identifier extension portion of the 16-byte target
+		port identifier.
+
+What:		/sys/class/scsi_host/host<n>/ioc_guid
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	Eight-byte I/O controller GUID portion of the 16-byte target
+		port identifier.
+
+What:		/sys/class/scsi_host/host<n>/local_ib_device
+Date:		November 29, 2006
+KernelVersion:	2.6.19
+Contact:	linux-rdma@vger.kernel.org
+Description:	Name of the InfiniBand HCA used for communicating with the
+		SRP target.
+
+What:		/sys/class/scsi_host/host<n>/local_ib_port
+Date:		November 29, 2006
+KernelVersion:	2.6.19
+Contact:	linux-rdma@vger.kernel.org
+Description:	Number of the HCA port used for communicating with the
+		SRP target.
+
+What:		/sys/class/scsi_host/host<n>/orig_dgid
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	InfiniBand destination GID specified in the parameters
+		written to the add_target sysfs attribute.
+
+What:		/sys/class/scsi_host/host<n>/pkey
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	A 16-bit number representing the InfiniBand partition key used
+		for communication with the SRP target.
+
+What:		/sys/class/scsi_host/host<n>/req_lim
+Date:		October 20, 2010
+KernelVersion:	2.6.36
+Contact:	linux-rdma@vger.kernel.org
+Description:	Number of requests ib_srp can send to the target before it has
+		to wait for more credits. For more information see also the
+		SRP credit algorithm in the SRP specification.
+
+What:		/sys/class/scsi_host/host<n>/service_id
+Date:		June 17, 2006
+KernelVersion:	2.6.17
+Contact:	linux-rdma@vger.kernel.org
+Description:	InfiniBand service ID used for establishing communication with
+		the SRP	target.
+
+What:		/sys/class/scsi_host/host<n>/sgid
+Date:		February 1, 2014
+KernelVersion:	3.13
+Contact:	linux-rdma@vger.kernel.org
+Description:	InfiniBand GID of the source port used for communication with
+		the SRP target.
+
+What:		/sys/class/scsi_host/host<n>/zero_req_lim
+Date:		September 20, 2006
+KernelVersion:	2.6.18
+Contact:	linux-rdma@vger.kernel.org
+Description:	Number of times the initiator had to wait before sending a
+		request to the target because it ran out of credits. For more
+		information see also the SRP credit algorithm in the SRP
+		specification.
diff --git a/Documentation/ABI/stable/sysfs-driver-mlxreg-io b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
new file mode 100644
index 000000000..fd9a8045b
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-mlxreg-io
@@ -0,0 +1,225 @@
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/asic_health
+Date:		June 2018
+KernelVersion:	4.19
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	This file shows ASIC health status. The possible values are:
+		0 - health failed, 2 - health OK, 3 - ASIC in booting state.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version
+Date:		June 2018
+KernelVersion:	4.19
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files show with which CPLD versions have been burned
+		on carrier and switch boards.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/fan_dir
+Date:		December 2018
+KernelVersion:	5.0
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	This file shows the system fans direction:
+		forward direction - relevant bit is set 0;
+		reversed direction - relevant bit is set 1.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version
+Date:		November 2018
+KernelVersion:	5.0
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files show with which CPLD versions have been burned
+		on LED or Gearbox board.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/jtag_enable
+Date:		November 2018
+KernelVersion:	5.0
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files enable and disable the access to the JTAG domain.
+		By default access to the JTAG domain is disabled.
+
+		The file is read/write.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/select_iio
+Date:		June 2018
+KernelVersion:	4.19
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	This file allows iio devices selection.
+
+		Attribute select_iio can be written with 0 or with 1. It
+		selects which one of iio devices can be accessed.
+
+		The file is read/write.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu1_on
+		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/psu2_on
+		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_cycle
+		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pwr_down
+Date:		June 2018
+KernelVersion:	4.19
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files allow asserting system power cycling, switching
+		power supply units on and off and system's main power domain
+		shutdown.
+		Expected behavior:
+		When pwr_cycle is written 1: auxiliary power domain will go
+		down and after short period (about 1 second) up.
+		When  psu1_on or psu2_on is written 1, related unit will be
+		disconnected from the power source, when written 0 - connected.
+		If both are written 1 - power supplies main power domain will
+		go down.
+		When pwr_down is written 1, system's main power domain will go
+		down.
+
+		The files are write only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_aux_pwr_or_ref
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_asic_thermal
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_halt
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_hotswap_or_wd
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_fw_reset
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_long_pb
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_main_pwr_fail
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_short_pb
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_reset
+Date:		June 2018
+KernelVersion:	4.19
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files show the system reset cause, as following: power
+		auxiliary outage or power refresh, ASIC thermal shutdown, halt,
+		hotswap, watchdog, firmware reset, long press power button,
+		short press power button, software reset. Value 1 in file means
+		this is reset cause, 0 - otherwise. Only one of the above
+		causes could be 1 at the same time, representing only last
+		reset cause.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_pwr_fail
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_comex
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_system
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_voltmon_upgrade_fail
+Date:		November 2018
+KernelVersion:	5.0
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files show the system reset cause, as following: ComEx
+		power fail, reset from ComEx, system platform reset, reset
+		due to voltage monitor devices upgrade failure,
+		Value 1 in file means this is reset cause, 0 - otherwise.
+		Only one bit could be 1 at the same time, representing only
+		the last reset cause.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version
+Date:		November 2018
+KernelVersion:	5.0
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files show with which CPLD versions have been burned
+		on LED board.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_thermal
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_comex_wd
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_from_asic
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_reload_bios
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sff_wd
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_swb_wd
+Date:		June 2019
+KernelVersion:	5.3
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files show the system reset cause, as following:
+		COMEX thermal shutdown; wathchdog power off or reset was derived
+		by one of the next components: COMEX, switch board or by Small Form
+		Factor mezzanine, reset requested from ASIC, reset cuased by BIOS
+		reload. Value 1 in file means this is reset cause, 0 - otherwise.
+		Only one of the above causes could be 1 at the same time, representing
+		only last reset cause.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config1
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/config2
+Date:		January 2020
+KernelVersion:	5.6
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files show system static topology identification
+		like system's static I2C topology, number and type of FPGA
+		devices within the system and so on.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_ac_pwr_fail
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_platform
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_soc
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/reset_sw_pwr_off
+Date:		January 2020
+KernelVersion:	5.6
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files show the system reset causes, as following: reset
+		due to AC power failure, reset invoked from software by
+		assertion reset signal through CPLD. reset caused by signal
+		asserted by SOC through ACPI register, reset invoked from
+		software by assertion power off signal through CPLD.
+
+		The files are read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/pcie_asic_reset_dis
+Date:		January 2020
+KernelVersion:	5.6
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	This file allows to retain ASIC up during PCIe root complex
+		reset, when attribute is set 1.
+
+		The file is read/write.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/vpd_wp
+Date:		January 2020
+KernelVersion:	5.6
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	This file allows to overwrite system VPD hardware wrtie
+		protection when attribute is set 1.
+
+		The file is read/write.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/voltreg_update_status
+Date:		January 2020
+KernelVersion:	5.6
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	This file exposes the configuration update status of burnable
+		voltage regulator devices. The status values are as following:
+		0 - OK; 1 - CRC failure; 2 = I2C failure; 3 - in progress.
+
+		The file is read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/ufm_version
+Date:		January 2020
+KernelVersion:	5.6
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	This file exposes the firmware version of burnable voltage
+		regulator devices.
+
+		The file is read only.
+
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_pn
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_pn
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_pn
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_pn
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld1_version_min
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld2_version_min
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld3_version_min
+What:		/sys/devices/platform/mlxplat/mlxreg-io/hwmon/hwmon*/cpld4_version_min
+Date:		July 2020
+KernelVersion:	5.9
+Contact:	Vadim Pasternak <vadimpmellanox.com>
+Description:	These files show with which CPLD part numbers and minor
+		versions have been burned CPLD devices equipped on a
+		system.
+
+		The files are read only.
diff --git a/Documentation/ABI/stable/sysfs-driver-qla2xxx b/Documentation/ABI/stable/sysfs-driver-qla2xxx
new file mode 100644
index 000000000..9a59d8449
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-qla2xxx
@@ -0,0 +1,8 @@
+What:		/sys/bus/pci/drivers/qla2xxx/.../devices/*
+Date:		September 2009
+Contact:	QLogic Linux Driver <linux-driver@qlogic.com>
+Description:	qla2xxx-udev.sh currently looks for uevent CHANGE events to
+		signal a firmware-dump has been generated by the driver and is
+		ready for retrieval.
+Users:		qla2xxx-udev.sh.  Proposed changes should be mailed to
+		linux-driver@qlogic.com
diff --git a/Documentation/ABI/stable/sysfs-driver-speakup b/Documentation/ABI/stable/sysfs-driver-speakup
new file mode 100644
index 000000000..792f58ba3
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-speakup
@@ -0,0 +1,379 @@
+What:		/sys/accessibility/speakup/attrib_bleep
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	Beeps the PC speaker when there is an attribute change such as
+		foreground or background color when using speakup review
+		commands. One = on, zero = off.
+
+What:		/sys/accessibility/speakup/bell_pos
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	This works much like a typewriter bell. If for example 72 is
+		echoed to bell_pos, it will beep the PC speaker when typing on
+		a line past character 72.
+
+What:		/sys/accessibility/speakup/bleeps
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	This controls whether one hears beeps through the PC speaker
+		when using speakup's review commands.
+		TODO: what values does it accept?
+
+What:		/sys/accessibility/speakup/bleep_time
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	This controls the duration of the PC speaker beeps speakup
+		produces.
+		TODO: What are the units? Jiffies?
+
+What:		/sys/accessibility/speakup/cursor_time
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	This controls cursor delay when using arrow keys. When a
+		connection is very slow, with the default setting, when moving
+		with  the arrows, or backspacing etc. speakup says the incorrect
+		characters. Set this to a higher value to adjust for the delay
+		and better synchronisation between cursor position and speech.
+
+What:		/sys/accessibility/speakup/delimiters
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	Delimit a word from speakup.
+		TODO: add more info
+
+What:		/sys/accessibility/speakup/ex_num
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	TODO:
+
+What:		/sys/accessibility/speakup/key_echo
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	Controls if speakup speaks keys when they are typed. One = on,
+		zero = off or don't echo keys.
+
+What:		/sys/accessibility/speakup/keymap
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	Speakup keymap remaps keys to Speakup functions.
+		It uses a binary
+		format. A special program called genmap is needed to compile a
+		textual  keymap into the binary format which is then loaded into
+		/sys/accessibility/speakup/keymap.
+
+What:		/sys/accessibility/speakup/no_interrupt
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	Controls if typing interrupts output from speakup. With
+		no_interrupt set to zero, typing on the keyboard will interrupt
+		speakup if for example
+		the say screen command is used before the
+		entire screen  is read.
+
+		With no_interrupt set to one, if the say
+		screen command is used, and one then types on the keyboard,
+		speakup will continue to say the whole screen regardless until
+		it finishes.
+
+What:		/sys/accessibility/speakup/punc_all
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	This is a list of all the punctuation speakup should speak when
+		punc_level is set to four.
+
+What:		/sys/accessibility/speakup/punc_level
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	Controls the level of punctuation spoken as the screen is
+		displayed, not reviewed. Levels range from zero no punctuation,
+		to four, all punctuation. One corresponds to punc_some, two
+		corresponds to punc_most, and three as well as four both
+		correspond to punc_all. Some hardware synthesizers may have
+		different levels each corresponding to  three and four for
+		punc_level. Also note that if punc_level is set to zero, and
+		key_echo is set to one, typed punctuation is still spoken as it
+		is typed.
+
+What:		/sys/accessibility/speakup/punc_most
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	This is a list of all the punctuation speakup should speak when
+		punc_level is set to two.
+
+What:		/sys/accessibility/speakup/punc_some
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	This is a list of all the punctuation speakup should speak when
+		punc_level is set to one.
+
+What:		/sys/accessibility/speakup/reading_punc
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	Almost the same as punc_level, the differences being that
+		reading_punc controls the level of punctuation when reviewing
+		the screen with speakup's screen review commands. The other
+		difference is that reading_punc set to three speaks punc_all,
+		and reading_punc set to four speaks all punctuation, including
+		spaces.
+
+What:		/sys/accessibility/speakup/repeats
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	A list of characters speakup repeats. Normally, when there are
+		more than three characters in a row, speakup
+		just reads three of
+		those characters. For example, "......" would be read as dot,
+		dot, dot. If a . is added to the list of characters in repeats,
+		"......" would be read as dot, dot, dot, times six.
+
+What:		/sys/accessibility/speakup/say_control
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	If set to one, speakup speaks shift, alt and control when those
+		keys are pressed. If say_control is set to zero, shift, ctrl,
+		and alt are not spoken when they are pressed.
+
+What:		/sys/accessibility/speakup/say_word_ctl
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	TODO:
+
+What:		/sys/accessibility/speakup/silent
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	TODO:
+
+What:		/sys/accessibility/speakup/spell_delay
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	This controls how fast a word is spelled
+		when speakup's say word
+		review command is pressed twice quickly to speak the current
+		word being reviewed. Zero just speaks the letters one after
+		another, while values one through four
+		seem to introduce more of
+		a pause between the spelling of each letter by speakup.
+
+What:		/sys/accessibility/speakup/synth
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	Gets or sets the synthesizer driver currently in use. Reading
+		synth returns the synthesizer driver currently in use. Writing
+		synth switches to the given synthesizer driver, provided it is
+		either built into the kernel, or already loaded as a module.
+
+What:		/sys/accessibility/speakup/synth_direct
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	Sends whatever is written to synth_direct
+		directly to the speech synthesizer in use, bypassing speakup.
+		This could be used to make the synthesizer speak
+		a string, or to
+		send control sequences to the synthesizer to change how the
+		synthesizer behaves.
+
+What:		/sys/accessibility/speakup/version
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	Reading version returns the version of speakup, and the version
+		of the synthesizer driver currently in use.
+
+What:		/sys/accessibility/speakup/i18n/announcements
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	This file contains various general announcements, most of which
+		cannot be categorized.  You will find messages such as "You
+		killed Speakup", "I'm alive", "leaving help", "parked",
+		"unparked", and others. You will also find the names of the
+		screen edges and cursor tracking modes here.
+
+What:		/sys/accessibility/speakup/i18n/chartab
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	TODO
+
+What:		/sys/accessibility/speakup/i18n/ctl_keys
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	Here, you will find names of control keys.  These are used with
+		Speakup's say_control feature.
+
+What:		/sys/accessibility/speakup/i18n/function_names
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	Here, you will find a list of names for Speakup functions.
+		These are used by the help system.  For example, suppose that
+		you have activated help mode, and you pressed
+		keypad 3.  Speakup
+		says: "keypad 3 is character, say next."
+		The message "character, say next" names a Speakup function, and
+		it comes from this function_names file.
+
+What:		/sys/accessibility/speakup/i18n/states
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	This file contains names for key states.
+		Again, these are part of the help system.  For instance, if you
+		had pressed speakup + keypad 3, you would hear:
+		"speakup keypad 3 is go to bottom edge."
+
+		The speakup key is depressed, so the name of the key state is
+		speakup.
+
+		This part of the message comes from the states collection.
+
+What:		/sys/accessibility/speakup/i18n/characters
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	Through this sys entry, Speakup gives you the ability to change
+		how Speakup pronounces a given character. You could, for
+		example, change how some punctuation characters are spoken. You
+		can even change how Speakup will pronounce certain letters. For
+		further details see '12.  Changing the Pronunciation of
+		Characters' in Speakup User's Guide (file spkguide.txt in
+		source).
+
+What:		/sys/accessibility/speakup/i18n/colors
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	When you use the "say attributes" function, Speakup says the
+		name of the foreground and background colors.  These names come
+		from the i18n/colors file.
+
+What:		/sys/accessibility/speakup/i18n/formatted
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	This group of messages contains embedded formatting codes, to
+		specify the type and width of displayed data.  If you change
+		these, you must preserve all of the formatting codes, and they
+		must appear in the order used by the default messages.
+
+What:		/sys/accessibility/speakup/i18n/key_names
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	Again, key_names is used by Speakup's help system.  In the
+		previous example, Speakup said that you pressed "keypad 3."
+		This name came from the key_names file.
+
+What:		/sys/accessibility/speakup/<synth-name>/
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	In `/sys/accessibility/speakup` is a directory corresponding to
+		the synthesizer driver currently in use (E.G) `soft` for the
+		soft driver. This directory contains files which control the
+		speech synthesizer itself,
+		as opposed to controlling the speakup
+		screen reader. The parameters in this directory have the same
+		names and functions across all
+		supported synthesizers. The range
+		of values for freq, pitch, rate, and vol is the same for all
+		supported synthesizers, with the given range being internally
+		mapped by the driver to  more or less fit the range of values
+		supported for a given parameter by the individual synthesizer.
+		Below is a description of values and  parameters for soft
+		synthesizer, which is currently the most commonly used.
+
+What:		/sys/accessibility/speakup/soft/caps_start
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	This is the string that is sent to the synthesizer to cause it
+		to start speaking uppercase letters. For the soft synthesizer
+		and most others, this causes the pitch of the voice to rise
+		above the currently set pitch.
+
+What:		/sys/accessibility/speakup/soft/caps_stop
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	This is the string sent to the synthesizer to cause it to stop
+		speaking uppercase letters. In the case of the soft synthesizer
+		and most others, this returns the pitch of the voice
+		down to the
+		currently set pitch.
+
+What:		/sys/accessibility/speakup/soft/delay_time
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	TODO:
+
+What:		/sys/accessibility/speakup/soft/direct
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	Controls if punctuation is spoken by speakup, or by the
+		synthesizer.
+
+		For example, speakup speaks ">" as "greater", while
+		the espeak synthesizer used by the soft driver speaks "greater
+		than". Zero lets speakup speak the punctuation. One lets the
+		synthesizer itself speak punctuation.
+
+What:		/sys/accessibility/speakup/soft/freq
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	Gets or sets the frequency of the speech synthesizer. Range is
+		0-9.
+
+What:		/sys/accessibility/speakup/soft/full_time
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	TODO:
+
+What:		/sys/accessibility/speakup/soft/jiffy_delta
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	This controls how many jiffys the kernel gives to the
+		synthesizer. Setting this too high can make a system unstable,
+		or even crash it.
+
+What:		/sys/accessibility/speakup/soft/pitch
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	Gets or sets the pitch of the synthesizer. The range is 0-9.
+
+What:		/sys/accessibility/speakup/soft/inflection
+KernelVersion:	5.8
+Contact:	speakup@linux-speakup.org
+Description:	Gets or sets the inflection of the synthesizer, i.e. the pitch
+		range. The range is 0-9.
+
+What:		/sys/accessibility/speakup/soft/punct
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	Gets or sets the amount of punctuation spoken by the
+		synthesizer. The range for the soft driver seems to be 0-2.
+		TODO: How is this related to speakup's punc_level, or
+		reading_punc.
+
+What:		/sys/accessibility/speakup/soft/rate
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	Gets or sets the rate of the synthesizer. Range is from zero
+		slowest, to nine fastest.
+
+What:		/sys/accessibility/speakup/soft/tone
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	Gets or sets the tone of the speech synthesizer. The range for
+		the soft driver seems to be 0-2. This seems to make no
+		difference if using espeak and the espeakup connector.
+		TODO: does espeakup support different tonalities?
+
+What:		/sys/accessibility/speakup/soft/trigger_time
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	TODO:
+
+What:		/sys/accessibility/speakup/soft/voice
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	Gets or sets the voice used by the synthesizer if the
+		synthesizer can speak in more than one voice. The range for the
+		soft driver is 0-7. Note that while espeak supports multiple
+		voices, this parameter will not set the voice when the espeakup
+		connector is used  between speakup and espeak.
+
+What:		/sys/accessibility/speakup/soft/vol
+KernelVersion:	2.6
+Contact:	speakup@linux-speakup.org
+Description:	Gets or sets the volume of the speech synthesizer. Range is 0-9,
+		with zero being the softest, and nine being the loudest.
+
diff --git a/Documentation/ABI/stable/sysfs-driver-usb-usbtmc b/Documentation/ABI/stable/sysfs-driver-usb-usbtmc
new file mode 100644
index 000000000..a9e123ba3
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-usb-usbtmc
@@ -0,0 +1,27 @@
+What:		/sys/bus/usb/drivers/usbtmc/*/interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/device_capabilities
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+		These files show the various USB TMC capabilities as described
+		by the device itself.  The full description of the bitfields
+		can be found in the USB TMC documents from the USB-IF entitled
+		"Universal Serial Bus Test and Measurement Class Specification
+		(USBTMC) Revision 1.0" section 4.2.1.8.
+
+		The files are read only.
+
+
+What:		/sys/bus/usb/drivers/usbtmc/*/usb488_interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/*/usb488_device_capabilities
+Date:		August 2008
+Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
+Description:
+		These files show the various USB TMC capabilities as described
+		by the device itself.  The full description of the bitfields
+		can be found in the USB TMC documents from the USB-IF entitled
+		"Universal Serial Bus Test and Measurement Class, Subclass
+		USB488 Specification (USBTMC-USB488) Revision 1.0" section
+		4.2.2.
+
+		The files are read only.
diff --git a/Documentation/ABI/stable/sysfs-driver-w1_ds28e04 b/Documentation/ABI/stable/sysfs-driver-w1_ds28e04
new file mode 100644
index 000000000..3e1c1fa8d
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-w1_ds28e04
@@ -0,0 +1,15 @@
+What:		/sys/bus/w1/devices/.../pio
+Date:		May 2012
+Contact:	Markus Franke <franm@hrz.tu-chemnitz.de>
+Description:	read/write the contents of the two PIO's of the DS28E04-100
+		see Documentation/w1/slaves/w1_ds28e04.rst for detailed information
+Users:		any user space application which wants to communicate with DS28E04-100
+
+
+
+What:		/sys/bus/w1/devices/.../eeprom
+Date:		May 2012
+Contact:	Markus Franke <franm@hrz.tu-chemnitz.de>
+Description:	read/write the contents of the EEPROM memory of the DS28E04-100
+		see Documentation/w1/slaves/w1_ds28e04.rst for detailed information
+Users:		any user space application which wants to communicate with DS28E04-100
diff --git a/Documentation/ABI/stable/sysfs-driver-w1_ds28ea00 b/Documentation/ABI/stable/sysfs-driver-w1_ds28ea00
new file mode 100644
index 000000000..534e63731
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-driver-w1_ds28ea00
@@ -0,0 +1,6 @@
+What:		/sys/bus/w1/devices/.../w1_seq
+Date:		Apr 2015
+Contact:	Matt Campbell <mattrcampbell@gmail.com>
+Description:	Support for the DS28EA00 chain sequence function
+		see Documentation/w1/slaves/w1_therm.rst for detailed information
+Users:		any user space application which wants to communicate with DS28EA00
diff --git a/Documentation/ABI/stable/sysfs-firmware-efi-vars b/Documentation/ABI/stable/sysfs-firmware-efi-vars
new file mode 100644
index 000000000..46ccd233e
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-firmware-efi-vars
@@ -0,0 +1,79 @@
+What:		/sys/firmware/efi/vars
+Date:		April 2004
+Contact:	Matt Domsch <Matt_Domsch@dell.com>
+Description:
+		This directory exposes interfaces for interactive with
+		EFI variables.  For more information on EFI variables,
+		see 'Variable Services' in the UEFI specification
+		(section 7.2 in specification version 2.3 Errata D).
+
+		In summary, EFI variables are named, and are classified
+		into separate namespaces through the use of a vendor
+		GUID.  They also have an arbitrary binary value
+		associated with them.
+
+		The efivars module enumerates these variables and
+		creates a separate directory for each one found.  Each
+		directory has a name of the form "<key>-<vendor guid>"
+		and contains the following files:
+
+		=============== ========================================
+		attributes:	A read-only text file enumerating the
+				EFI variable flags.  Potential values
+				include:
+
+				EFI_VARIABLE_NON_VOLATILE
+				EFI_VARIABLE_BOOTSERVICE_ACCESS
+				EFI_VARIABLE_RUNTIME_ACCESS
+				EFI_VARIABLE_HARDWARE_ERROR_RECORD
+				EFI_VARIABLE_AUTHENTICATED_WRITE_ACCESS
+
+				See the EFI documentation for an
+				explanation of each of these variables.
+
+		data:		A read-only binary file that can be read
+				to attain the value of the EFI variable
+
+		guid:		The vendor GUID of the variable.  This
+				should always match the GUID in the
+				variable's name.
+
+		raw_var:	A binary file that can be read to obtain
+				a structure that contains everything
+				there is to know about the variable.
+				For structure definition see "struct
+				efi_variable" in the kernel sources.
+
+				This file can also be written to in
+				order to update the value of a variable.
+				For this to work however, all fields of
+				the "struct efi_variable" passed must
+				match byte for byte with the structure
+				read out of the file, save for the value
+				portion.
+
+				**Note** the efi_variable structure
+				read/written with this file contains a
+				'long' type that may change widths
+				depending on your underlying
+				architecture.
+
+		size:		As ASCII representation of the size of
+				the variable's value.
+		=============== ========================================
+
+
+		In addition, two other magic binary files are provided
+		in the top-level directory and are used for adding and
+		removing variables:
+
+		=============== ========================================
+		new_var:	Takes a "struct efi_variable" and
+				instructs the EFI firmware to create a
+				new variable.
+
+		del_var:	Takes a "struct efi_variable" and
+				instructs the EFI firmware to remove any
+				variable that has a matching vendor GUID
+				and variable key name.
+		=============== ========================================
diff --git a/Documentation/ABI/stable/sysfs-firmware-opal-dump b/Documentation/ABI/stable/sysfs-firmware-opal-dump
new file mode 100644
index 000000000..1f74f4532
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-firmware-opal-dump
@@ -0,0 +1,46 @@
+What:		/sys/firmware/opal/dump
+Date:		Feb 2014
+Contact:	Stewart Smith <stewart@linux.vnet.ibm.com>
+Description:
+		This directory exposes interfaces for interacting with
+		the FSP and platform dumps through OPAL firmware interface.
+
+		This is only for the powerpc/powernv platform.
+
+		=============== ===============================================
+		initiate_dump:	When '1' is written to it,
+				we will initiate a dump.
+				Read this file for supported commands.
+
+		0xXX-0xYYYY:	A directory for dump of type 0xXX and
+				id 0xYYYY (in hex). The name of this
+				directory should not be relied upon to
+				be in this format, only that it's unique
+				among all dumps. For determining the type
+				and ID of the dump, use the id and type files.
+				Do not rely on any particular size of dump
+				type or dump id.
+		=============== ===============================================
+
+		Each dump has the following files:
+
+		=============== ===============================================
+		id:		An ASCII representation of the dump ID
+				in hex (e.g. '0x01')
+		type:		An ASCII representation of the type of
+				dump in the format "0x%x %s" with the ID
+				in hex and a description of the dump type
+				(or 'unknown').
+				Type '0xffffffff unknown' is used when
+				we could not get the type from firmware.
+				e.g. '0x02 System/Platform Dump'
+		dump:		A binary file containing the dump.
+				The size of the dump is the size of this file.
+		acknowledge:	When 'ack' is written to this, we will
+				acknowledge that we've retrieved the
+				dump to the service processor. It will
+				then remove it, making the dump
+				inaccessible.
+				Reading this file will get a list of
+				supported actions.
+		=============== ===============================================
diff --git a/Documentation/ABI/stable/sysfs-firmware-opal-elog b/Documentation/ABI/stable/sysfs-firmware-opal-elog
new file mode 100644
index 000000000..7c8a61a2d
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-firmware-opal-elog
@@ -0,0 +1,62 @@
+What:		/sys/firmware/opal/elog
+Date:		Feb 2014
+Contact:	Stewart Smith <stewart@linux.vnet.ibm.com>
+Description:
+		This directory exposes error log entries retrieved
+		through the OPAL firmware interface.
+
+		Each error log is identified by a unique ID and will
+		exist until explicitly acknowledged to firmware.
+
+		Each log entry has a directory in /sys/firmware/opal/elog.
+
+		Log entries may be purged by the service processor
+		before retrieved by firmware or retrieved/acknowledged by
+		Linux if there is no room for more log entries.
+
+		In the event that Linux has retrieved the log entries
+		but not explicitly acknowledged them to firmware and
+		the service processor needs more room for log entries,
+		the only remaining copy of a log message may be in
+		Linux.
+
+		Typically, a user space daemon will monitor for new
+		entries, read them out and acknowledge them.
+
+		The service processor may be able to store more log
+		entries than firmware can, so after you acknowledge
+		an event from Linux you may instantly get another one
+		from the queue that was generated some time in the past.
+
+		The raw log format is a binary format. We currently
+		do not parse this at all in kernel, leaving it up to
+		user space to solve the problem. In future, we may
+		do more parsing in kernel and add more files to make
+		it easier for simple user space processes to extract
+		more information.
+
+		For each log entry (directory), there are the following
+		files:
+
+		==============  ================================================
+		id:		An ASCII representation of the ID of the
+				error log, in hex - e.g. "0x01".
+
+		type:		An ASCII representation of the type id and
+				description of the type of error log.
+				Currently just "0x00 PEL" - platform error log.
+				In the future there may be additional types.
+
+		raw:		A read-only binary file that can be read
+				to get the raw log entry. These are
+				<16kb, often just hundreds of bytes and
+				"average" 2kb.
+
+		acknowledge:	Writing 'ack' to this file will acknowledge
+				the error log to firmware (and in turn
+				the service processor, if applicable).
+				Shortly after acknowledging it, the log
+				entry will be removed from sysfs.
+				Reading this file will list the supported
+				operations (currently just acknowledge).
+		==============  ================================================
diff --git a/Documentation/ABI/stable/sysfs-fs-orangefs b/Documentation/ABI/stable/sysfs-fs-orangefs
new file mode 100644
index 000000000..affdb114b
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-fs-orangefs
@@ -0,0 +1,87 @@
+What:			/sys/fs/orangefs/perf_counters/*
+Date:			Jun 2015
+Contact:		Mike Marshall <hubcap@omnibond.com>
+Description:
+			Counters and settings for various caches.
+			Read only.
+
+
+What:			/sys/fs/orangefs/perf_counter_reset
+Date:			June 2015
+Contact:		Mike Marshall <hubcap@omnibond.com>
+Description:
+			echo a 0 or a 1 into perf_counter_reset to
+			reset all the counters in
+			/sys/fs/orangefs/perf_counters
+			except ones with PINT_PERF_PRESERVE set.
+
+
+What:			/sys/fs/orangefs/perf_time_interval_secs
+Date:			Jun 2015
+Contact:		Mike Marshall <hubcap@omnibond.com>
+Description:
+			Length of perf counter intervals in
+			seconds.
+
+
+What:			/sys/fs/orangefs/perf_history_size
+Date:			Jun 2015
+Contact:		Mike Marshall <hubcap@omnibond.com>
+Description:
+			The perf_counters cache statistics have N, or
+			perf_history_size, samples. The default is
+			one.
+
+			Every perf_time_interval_secs the (first)
+			samples are reset.
+
+			If N is greater than one, the "current" set
+			of samples is reset, and the samples from the
+			other N-1 intervals remain available.
+
+
+What:			/sys/fs/orangefs/op_timeout_secs
+Date:			Jun 2015
+Contact:		Mike Marshall <hubcap@omnibond.com>
+Description:
+			Service operation timeout in seconds.
+
+
+What:			/sys/fs/orangefs/slot_timeout_secs
+Date:			Jun 2015
+Contact:		Mike Marshall <hubcap@omnibond.com>
+Description:
+			"Slot" timeout in seconds. A "slot"
+			is an indexed buffer in the shared
+			memory segment used for communication
+			between the kernel module and userspace.
+			Slots are requested and waited for,
+			the wait times out after slot_timeout_secs.
+
+
+What:			/sys/fs/orangefs/acache/*
+Date:			Jun 2015
+Contact:		Mike Marshall <hubcap@omnibond.com>
+Description:
+			Attribute cache configurable settings.
+
+
+What:			/sys/fs/orangefs/ncache/*
+Date:			Jun 2015
+Contact:		Mike Marshall <hubcap@omnibond.com>
+Description:
+			Name cache configurable settings.
+
+
+What:			/sys/fs/orangefs/capcache/*
+Date:			Jun 2015
+Contact:		Mike Marshall <hubcap@omnibond.com>
+Description:
+			Capability cache configurable settings.
+
+
+What:			/sys/fs/orangefs/ccache/*
+Date:			Jun 2015
+Contact:		Mike Marshall <hubcap@omnibond.com>
+Description:
+			Credential cache configurable settings.
diff --git a/Documentation/ABI/stable/sysfs-hypervisor-xen b/Documentation/ABI/stable/sysfs-hypervisor-xen
new file mode 100644
index 000000000..748593c64
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-hypervisor-xen
@@ -0,0 +1,122 @@
+What:		/sys/hypervisor/compilation/compile_date
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		Contains the build time stamp of the Xen hypervisor
+		Might return "<denied>" in case of special security settings
+		in the hypervisor.
+
+What:		/sys/hypervisor/compilation/compiled_by
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		Contains information who built the Xen hypervisor
+		Might return "<denied>" in case of special security settings
+		in the hypervisor.
+
+What:		/sys/hypervisor/compilation/compiler
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		Compiler which was used to build the Xen hypervisor
+		Might return "<denied>" in case of special security settings
+		in the hypervisor.
+
+What:		/sys/hypervisor/properties/capabilities
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		Space separated list of supported guest system types. Each type
+		is in the format: <class>-<major>.<minor>-<arch>
+		With:
+
+			======== ============================================
+			<class>: "xen" -- x86: paravirtualized, arm: standard
+				 "hvm" -- x86 only: fully virtualized
+			<major>: major guest interface version
+			<minor>: minor guest interface version
+			<arch>:  architecture, e.g.:
+				 "x86_32": 32 bit x86 guest without PAE
+				 "x86_32p": 32 bit x86 guest with PAE
+				 "x86_64": 64 bit x86 guest
+				 "armv7l": 32 bit arm guest
+				 "aarch64": 64 bit arm guest
+			======== ============================================
+
+What:		/sys/hypervisor/properties/changeset
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		Changeset of the hypervisor (git commit)
+		Might return "<denied>" in case of special security settings
+		in the hypervisor.
+
+What:		/sys/hypervisor/properties/features
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		Features the Xen hypervisor supports for the guest as defined
+		in include/xen/interface/features.h printed as a hex value.
+
+What:		/sys/hypervisor/properties/pagesize
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		Default page size of the hypervisor printed as a hex value.
+		Might return "0" in case of special security settings
+		in the hypervisor.
+
+What:		/sys/hypervisor/properties/virtual_start
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		Virtual address of the hypervisor as a hex value.
+
+What:		/sys/hypervisor/type
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		Type of hypervisor:
+		"xen": Xen hypervisor
+
+What:		/sys/hypervisor/uuid
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		UUID of the guest as known to the Xen hypervisor.
+
+What:		/sys/hypervisor/version/extra
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		The Xen version is in the format <major>.<minor><extra>
+		This is the <extra> part of it.
+		Might return "<denied>" in case of special security settings
+		in the hypervisor.
+
+What:		/sys/hypervisor/version/major
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		The Xen version is in the format <major>.<minor><extra>
+		This is the <major> part of it.
+
+What:		/sys/hypervisor/version/minor
+Date:		March 2009
+KernelVersion:	2.6.30
+Contact:	xen-devel@lists.xenproject.org
+Description:	If running under Xen:
+		The Xen version is in the format <major>.<minor><extra>
+		This is the <minor> part of it.
diff --git a/Documentation/ABI/stable/sysfs-kernel-notes b/Documentation/ABI/stable/sysfs-kernel-notes
new file mode 100644
index 000000000..2c76ee9e6
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-kernel-notes
@@ -0,0 +1,5 @@
+What:		/sys/kernel/notes
+Date:		July 2009
+Contact:	<linux-kernel@vger.kernel.org>
+Description:	The /sys/kernel/notes file contains the binary representation
+		of the running vmlinux's .notes section.
diff --git a/Documentation/ABI/stable/sysfs-module b/Documentation/ABI/stable/sysfs-module
new file mode 100644
index 000000000..6272ae5fb
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-module
@@ -0,0 +1,34 @@
+What:		/sys/module
+Description:
+	The /sys/module tree consists of the following structure:
+
+	/sys/module/MODULENAME
+		The name of the module that is in the kernel.  This
+		module name will always show up if the module is loaded as a
+		dynamic module.  If it is built directly into the kernel, it
+		will only show up if it has a version or at least one
+		parameter.
+
+		Note: The conditions of creation in the built-in case are not
+		by design and may be removed in the future.
+
+	/sys/module/MODULENAME/parameters
+		This directory contains individual files that are each
+		individual parameters of the module that are able to be
+		changed at runtime.  See the individual module
+		documentation as to the contents of these parameters and
+		what they accomplish.
+
+		Note: The individual parameter names and values are not
+		considered stable, only the fact that they will be
+		placed in this location within sysfs.  See the
+		individual driver documentation for details as to the
+		stability of the different parameters.
+
+	/sys/module/MODULENAME/refcnt
+		If the module is able to be unloaded from the kernel, this file
+		will contain the current reference count of the module.
+
+		Note: If the module is built into the kernel, or if the
+		CONFIG_MODULE_UNLOAD kernel configuration value is not enabled,
+		this file will not be present.
diff --git a/Documentation/ABI/stable/sysfs-transport-srp b/Documentation/ABI/stable/sysfs-transport-srp
new file mode 100644
index 000000000..ec7af69fe
--- /dev/null
+++ b/Documentation/ABI/stable/sysfs-transport-srp
@@ -0,0 +1,58 @@
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/delete
+Date:		June 1, 2012
+KernelVersion:	3.7
+Contact:	linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description:	Instructs an SRP initiator to disconnect from a target and to
+		remove all LUNs imported from that target.
+
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/dev_loss_tmo
+Date:		February 1, 2014
+KernelVersion:	3.13
+Contact:	linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description:	Number of seconds the SCSI layer will wait after a transport
+		layer error has been observed before removing a target port.
+		Zero means immediate removal. Setting this attribute to "off"
+		will disable the dev_loss timer.
+
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/fast_io_fail_tmo
+Date:		February 1, 2014
+KernelVersion:	3.13
+Contact:	linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description:	Number of seconds the SCSI layer will wait after a transport
+		layer error has been observed before failing I/O. Zero means
+		failing I/O immediately. Setting this attribute to "off" will
+		disable the fast_io_fail timer.
+
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/port_id
+Date:		June 27, 2007
+KernelVersion:	2.6.24
+Contact:	linux-scsi@vger.kernel.org
+Description:	16-byte local SRP port identifier in hexadecimal format. An
+		example: 4c:49:4e:55:58:20:56:49:4f:00:00:00:00:00:00:00.
+
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/reconnect_delay
+Date:		February 1, 2014
+KernelVersion:	3.13
+Contact:	linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description:	Number of seconds the SCSI layer will wait after a reconnect
+		attempt failed before retrying. Setting this attribute to
+		"off" will disable time-based reconnecting.
+
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/roles
+Date:		June 27, 2007
+KernelVersion:	2.6.24
+Contact:	linux-scsi@vger.kernel.org
+Description:	Role of the remote port. Either "SRP Initiator" or "SRP Target".
+
+What:		/sys/class/srp_remote_ports/port-<h>:<n>/state
+Date:		February 1, 2014
+KernelVersion:	3.13
+Contact:	linux-scsi@vger.kernel.org, linux-rdma@vger.kernel.org
+Description:	State of the transport layer used for communication with the
+		remote port. "running" if the transport layer is operational;
+		"blocked" if a transport layer error has been encountered but
+		the fast_io_fail_tmo timer has not yet fired; "fail-fast"
+		after the fast_io_fail_tmo timer has fired and before the
+		"dev_loss_tmo" timer has fired; "lost" after the
+		"dev_loss_tmo" timer has fired and before the port is finally
+		removed.
diff --git a/Documentation/ABI/stable/thermal-notification b/Documentation/ABI/stable/thermal-notification
new file mode 100644
index 000000000..9723e8b7a
--- /dev/null
+++ b/Documentation/ABI/stable/thermal-notification
@@ -0,0 +1,4 @@
+What:		A notification mechanism for thermal related events
+Description:
+	This interface enables notification for thermal related events.
+	The notification is in the form of a netlink event.
diff --git a/Documentation/ABI/stable/vdso b/Documentation/ABI/stable/vdso
new file mode 100644
index 000000000..951838d42
--- /dev/null
+++ b/Documentation/ABI/stable/vdso
@@ -0,0 +1,35 @@
+What:		vDSO
+Date:		July 2011
+KernelVersion:	3.0
+Contact:	Andy Lutomirski <luto@kernel.org>
+Description:
+
+On some architectures, when the kernel loads any userspace program it
+maps an ELF DSO into that program's address space.  This DSO is called
+the vDSO and it often contains useful and highly-optimized alternatives
+to real syscalls.
+
+These functions are called just like ordinary C function according to
+your platform's ABI.  Call them from a sensible context.  (For example,
+if you set CS on x86 to something strange, the vDSO functions are
+within their rights to crash.)  In addition, if you pass a bad
+pointer to a vDSO function, you might get SIGSEGV instead of -EFAULT.
+
+To find the DSO, parse the auxiliary vector passed to the program's
+entry point.  The AT_SYSINFO_EHDR entry will point to the vDSO.
+
+The vDSO uses symbol versioning; whenever you request a symbol from the
+vDSO, specify the version you are expecting.
+
+Programs that dynamically link to glibc will use the vDSO automatically.
+Otherwise, you can use the reference parser in
+tools/testing/selftests/vDSO/parse_vdso.c.
+
+Unless otherwise noted, the set of symbols with any given version and the
+ABI of those symbols is considered stable.  It may vary across architectures,
+though.
+
+Note:
+ As of this writing, this ABI documentation as been confirmed for x86_64.
+ The maintainers of the other vDSO-using architectures should confirm
+ that it is correct for their architecture.