Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 138 insertions, 0 deletions

diff --git a/Documentation/PCI/sysfs-pci.rst b/Documentation/PCI/sysfs-pci.rst
new file mode 100644
index 000000000..742fbd21d
--- /dev/null
+++ b/Documentation/PCI/sysfs-pci.rst
@@ -0,0 +1,138 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============================================
+Accessing PCI device resources through sysfs
+============================================
+
+sysfs, usually mounted at /sys, provides access to PCI resources on platforms
+that support it.  For example, a given bus might look like this::
+
+     /sys/devices/pci0000:17
+     |-- 0000:17:00.0
+     |   |-- class
+     |   |-- config
+     |   |-- device
+     |   |-- enable
+     |   |-- irq
+     |   |-- local_cpus
+     |   |-- remove
+     |   |-- resource
+     |   |-- resource0
+     |   |-- resource1
+     |   |-- resource2
+     |   |-- revision
+     |   |-- rom
+     |   |-- subsystem_device
+     |   |-- subsystem_vendor
+     |   `-- vendor
+     `-- ...
+
+The topmost element describes the PCI domain and bus number.  In this case,
+the domain number is 0000 and the bus number is 17 (both values are in hex).
+This bus contains a single function device in slot 0.  The domain and bus
+numbers are reproduced for convenience.  Under the device directory are several
+files, each with their own function.
+
+       =================== =====================================================
+       file		   function
+       =================== =====================================================
+       class		   PCI class (ascii, ro)
+       config		   PCI config space (binary, rw)
+       device		   PCI device (ascii, ro)
+       enable	           Whether the device is enabled (ascii, rw)
+       irq		   IRQ number (ascii, ro)
+       local_cpus	   nearby CPU mask (cpumask, ro)
+       remove		   remove device from kernel's list (ascii, wo)
+       resource		   PCI resource host addresses (ascii, ro)
+       resource0..N	   PCI resource N, if present (binary, mmap, rw\ [1]_)
+       resource0_wc..N_wc  PCI WC map resource N, if prefetchable (binary, mmap)
+       revision		   PCI revision (ascii, ro)
+       rom		   PCI ROM resource, if present (binary, ro)
+       subsystem_device	   PCI subsystem device (ascii, ro)
+       subsystem_vendor	   PCI subsystem vendor (ascii, ro)
+       vendor		   PCI vendor (ascii, ro)
+       =================== =====================================================
+
+::
+
+  ro - read only file
+  rw - file is readable and writable
+  wo - write only file
+  mmap - file is mmapable
+  ascii - file contains ascii text
+  binary - file contains binary data
+  cpumask - file contains a cpumask type
+
+.. [1] rw for IORESOURCE_IO (I/O port) regions only
+
+The read only files are informational, writes to them will be ignored, with
+the exception of the 'rom' file.  Writable files can be used to perform
+actions on the device (e.g. changing config space, detaching a device).
+mmapable files are available via an mmap of the file at offset 0 and can be
+used to do actual device programming from userspace.  Note that some platforms
+don't support mmapping of certain resources, so be sure to check the return
+value from any attempted mmap.  The most notable of these are I/O port
+resources, which also provide read/write access.
+
+The 'enable' file provides a counter that indicates how many times the device
+has been enabled.  If the 'enable' file currently returns '4', and a '1' is
+echoed into it, it will then return '5'.  Echoing a '0' into it will decrease
+the count.  Even when it returns to 0, though, some of the initialisation
+may not be reversed.
+
+The 'rom' file is special in that it provides read-only access to the device's
+ROM file, if available.  It's disabled by default, however, so applications
+should write the string "1" to the file to enable it before attempting a read
+call, and disable it following the access by writing "0" to the file.  Note
+that the device must be enabled for a rom read to return data successfully.
+In the event a driver is not bound to the device, it can be enabled using the
+'enable' file, documented above.
+
+The 'remove' file is used to remove the PCI device, by writing a non-zero
+integer to the file.  This does not involve any kind of hot-plug functionality,
+e.g. powering off the device.  The device is removed from the kernel's list of
+PCI devices, the sysfs directory for it is removed, and the device will be
+removed from any drivers attached to it. Removal of PCI root buses is
+disallowed.
+
+Accessing legacy resources through sysfs
+----------------------------------------
+
+Legacy I/O port and ISA memory resources are also provided in sysfs if the
+underlying platform supports them.  They're located in the PCI class hierarchy,
+e.g.::
+
+	/sys/class/pci_bus/0000:17/
+	|-- bridge -> ../../../devices/pci0000:17
+	|-- cpuaffinity
+	|-- legacy_io
+	`-- legacy_mem
+
+The legacy_io file is a read/write file that can be used by applications to
+do legacy port I/O.  The application should open the file, seek to the desired
+port (e.g. 0x3e8) and do a read or a write of 1, 2 or 4 bytes.  The legacy_mem
+file should be mmapped with an offset corresponding to the memory offset
+desired, e.g. 0xa0000 for the VGA frame buffer.  The application can then
+simply dereference the returned pointer (after checking for errors of course)
+to access legacy memory space.
+
+Supporting PCI access on new platforms
+--------------------------------------
+
+In order to support PCI resource mapping as described above, Linux platform
+code should ideally define ARCH_GENERIC_PCI_MMAP_RESOURCE and use the generic
+implementation of that functionality. To support the historical interface of
+mmap() through files in /proc/bus/pci, platforms may also set HAVE_PCI_MMAP.
+
+Alternatively, platforms which set HAVE_PCI_MMAP may provide their own
+implementation of pci_mmap_page_range() instead of defining
+ARCH_GENERIC_PCI_MMAP_RESOURCE.
+
+Platforms which support write-combining maps of PCI resources must define
+arch_can_pci_mmap_wc() which shall evaluate to non-zero at runtime when
+write-combining is permitted. Platforms which support maps of I/O resources
+define arch_can_pci_mmap_io() similarly.
+
+Legacy resources are protected by the HAVE_PCI_LEGACY define.  Platforms
+wishing to support legacy functionality should define it and provide
+pci_legacy_read, pci_legacy_write and pci_mmap_legacy_page_range functions.