diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst | |
parent | Initial commit. (diff) | |
download | linux-430c2fc249ea5c0536abd21c23382884005c9093.tar.xz linux-430c2fc249ea5c0536abd21c23382884005c9093.zip |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst')
-rw-r--r-- | Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst | 521 |
1 files changed, 521 insertions, 0 deletions
diff --git a/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst b/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst new file mode 100644 index 000000000..72f0f6fbd --- /dev/null +++ b/Documentation/RCU/Design/Expedited-Grace-Periods/Expedited-Grace-Periods.rst @@ -0,0 +1,521 @@ +================================================= +A Tour Through TREE_RCU's Expedited Grace Periods +================================================= + +Introduction +============ + +This document describes RCU's expedited grace periods. +Unlike RCU's normal grace periods, which accept long latencies to attain +high efficiency and minimal disturbance, expedited grace periods accept +lower efficiency and significant disturbance to attain shorter latencies. + +There are two flavors of RCU (RCU-preempt and RCU-sched), with an earlier +third RCU-bh flavor having been implemented in terms of the other two. +Each of the two implementations is covered in its own section. + +Expedited Grace Period Design +============================= + +The expedited RCU grace periods cannot be accused of being subtle, +given that they for all intents and purposes hammer every CPU that +has not yet provided a quiescent state for the current expedited +grace period. +The one saving grace is that the hammer has grown a bit smaller +over time: The old call to ``try_stop_cpus()`` has been +replaced with a set of calls to ``smp_call_function_single()``, +each of which results in an IPI to the target CPU. +The corresponding handler function checks the CPU's state, motivating +a faster quiescent state where possible, and triggering a report +of that quiescent state. +As always for RCU, once everything has spent some time in a quiescent +state, the expedited grace period has completed. + +The details of the ``smp_call_function_single()`` handler's +operation depend on the RCU flavor, as described in the following +sections. + +RCU-preempt Expedited Grace Periods +=================================== + +``CONFIG_PREEMPT=y`` kernels implement RCU-preempt. +The overall flow of the handling of a given CPU by an RCU-preempt +expedited grace period is shown in the following diagram: + +.. kernel-figure:: ExpRCUFlow.svg + +The solid arrows denote direct action, for example, a function call. +The dotted arrows denote indirect action, for example, an IPI +or a state that is reached after some time. + +If a given CPU is offline or idle, ``synchronize_rcu_expedited()`` +will ignore it because idle and offline CPUs are already residing +in quiescent states. +Otherwise, the expedited grace period will use +``smp_call_function_single()`` to send the CPU an IPI, which +is handled by ``rcu_exp_handler()``. + +However, because this is preemptible RCU, ``rcu_exp_handler()`` +can check to see if the CPU is currently running in an RCU read-side +critical section. +If not, the handler can immediately report a quiescent state. +Otherwise, it sets flags so that the outermost ``rcu_read_unlock()`` +invocation will provide the needed quiescent-state report. +This flag-setting avoids the previous forced preemption of all +CPUs that might have RCU read-side critical sections. +In addition, this flag-setting is done so as to avoid increasing +the overhead of the common-case fastpath through the scheduler. + +Again because this is preemptible RCU, an RCU read-side critical section +can be preempted. +When that happens, RCU will enqueue the task, which will the continue to +block the current expedited grace period until it resumes and finds its +outermost ``rcu_read_unlock()``. +The CPU will report a quiescent state just after enqueuing the task because +the CPU is no longer blocking the grace period. +It is instead the preempted task doing the blocking. +The list of blocked tasks is managed by ``rcu_preempt_ctxt_queue()``, +which is called from ``rcu_preempt_note_context_switch()``, which +in turn is called from ``rcu_note_context_switch()``, which in +turn is called from the scheduler. + + ++-----------------------------------------------------------------------+ +| **Quick Quiz**: | ++-----------------------------------------------------------------------+ +| Why not just have the expedited grace period check the state of all | +| the CPUs? After all, that would avoid all those real-time-unfriendly | +| IPIs. | ++-----------------------------------------------------------------------+ +| **Answer**: | ++-----------------------------------------------------------------------+ +| Because we want the RCU read-side critical sections to run fast, | +| which means no memory barriers. Therefore, it is not possible to | +| safely check the state from some other CPU. And even if it was | +| possible to safely check the state, it would still be necessary to | +| IPI the CPU to safely interact with the upcoming | +| ``rcu_read_unlock()`` invocation, which means that the remote state | +| testing would not help the worst-case latency that real-time | +| applications care about. | +| | +| One way to prevent your real-time application from getting hit with | +| these IPIs is to build your kernel with ``CONFIG_NO_HZ_FULL=y``. RCU | +| would then perceive the CPU running your application as being idle, | +| and it would be able to safely detect that state without needing to | +| IPI the CPU. | ++-----------------------------------------------------------------------+ + +Please note that this is just the overall flow: Additional complications +can arise due to races with CPUs going idle or offline, among other +things. + +RCU-sched Expedited Grace Periods +--------------------------------- + +``CONFIG_PREEMPT=n`` kernels implement RCU-sched. The overall flow of +the handling of a given CPU by an RCU-sched expedited grace period is +shown in the following diagram: + +.. kernel-figure:: ExpSchedFlow.svg + +As with RCU-preempt, RCU-sched's ``synchronize_rcu_expedited()`` ignores +offline and idle CPUs, again because they are in remotely detectable +quiescent states. However, because the ``rcu_read_lock_sched()`` and +``rcu_read_unlock_sched()`` leave no trace of their invocation, in +general it is not possible to tell whether or not the current CPU is in +an RCU read-side critical section. The best that RCU-sched's +``rcu_exp_handler()`` can do is to check for idle, on the off-chance +that the CPU went idle while the IPI was in flight. If the CPU is idle, +then ``rcu_exp_handler()`` reports the quiescent state. + +Otherwise, the handler forces a future context switch by setting the +NEED_RESCHED flag of the current task's thread flag and the CPU preempt +counter. At the time of the context switch, the CPU reports the +quiescent state. Should the CPU go offline first, it will report the +quiescent state at that time. + +Expedited Grace Period and CPU Hotplug +-------------------------------------- + +The expedited nature of expedited grace periods require a much tighter +interaction with CPU hotplug operations than is required for normal +grace periods. In addition, attempting to IPI offline CPUs will result +in splats, but failing to IPI online CPUs can result in too-short grace +periods. Neither option is acceptable in production kernels. + +The interaction between expedited grace periods and CPU hotplug +operations is carried out at several levels: + +#. The number of CPUs that have ever been online is tracked by the + ``rcu_state`` structure's ``->ncpus`` field. The ``rcu_state`` + structure's ``->ncpus_snap`` field tracks the number of CPUs that + have ever been online at the beginning of an RCU expedited grace + period. Note that this number never decreases, at least in the + absence of a time machine. +#. The identities of the CPUs that have ever been online is tracked by + the ``rcu_node`` structure's ``->expmaskinitnext`` field. The + ``rcu_node`` structure's ``->expmaskinit`` field tracks the + identities of the CPUs that were online at least once at the + beginning of the most recent RCU expedited grace period. The + ``rcu_state`` structure's ``->ncpus`` and ``->ncpus_snap`` fields are + used to detect when new CPUs have come online for the first time, + that is, when the ``rcu_node`` structure's ``->expmaskinitnext`` + field has changed since the beginning of the last RCU expedited grace + period, which triggers an update of each ``rcu_node`` structure's + ``->expmaskinit`` field from its ``->expmaskinitnext`` field. +#. Each ``rcu_node`` structure's ``->expmaskinit`` field is used to + initialize that structure's ``->expmask`` at the beginning of each + RCU expedited grace period. This means that only those CPUs that have + been online at least once will be considered for a given grace + period. +#. Any CPU that goes offline will clear its bit in its leaf ``rcu_node`` + structure's ``->qsmaskinitnext`` field, so any CPU with that bit + clear can safely be ignored. However, it is possible for a CPU coming + online or going offline to have this bit set for some time while + ``cpu_online`` returns ``false``. +#. For each non-idle CPU that RCU believes is currently online, the + grace period invokes ``smp_call_function_single()``. If this + succeeds, the CPU was fully online. Failure indicates that the CPU is + in the process of coming online or going offline, in which case it is + necessary to wait for a short time period and try again. The purpose + of this wait (or series of waits, as the case may be) is to permit a + concurrent CPU-hotplug operation to complete. +#. In the case of RCU-sched, one of the last acts of an outgoing CPU is + to invoke ``rcu_report_dead()``, which reports a quiescent state for + that CPU. However, this is likely paranoia-induced redundancy. + ++-----------------------------------------------------------------------+ +| **Quick Quiz**: | ++-----------------------------------------------------------------------+ +| Why all the dancing around with multiple counters and masks tracking | +| CPUs that were once online? Why not just have a single set of masks | +| tracking the currently online CPUs and be done with it? | ++-----------------------------------------------------------------------+ +| **Answer**: | ++-----------------------------------------------------------------------+ +| Maintaining single set of masks tracking the online CPUs *sounds* | +| easier, at least until you try working out all the race conditions | +| between grace-period initialization and CPU-hotplug operations. For | +| example, suppose initialization is progressing down the tree while a | +| CPU-offline operation is progressing up the tree. This situation can | +| result in bits set at the top of the tree that have no counterparts | +| at the bottom of the tree. Those bits will never be cleared, which | +| will result in grace-period hangs. In short, that way lies madness, | +| to say nothing of a great many bugs, hangs, and deadlocks. | +| In contrast, the current multi-mask multi-counter scheme ensures that | +| grace-period initialization will always see consistent masks up and | +| down the tree, which brings significant simplifications over the | +| single-mask method. | +| | +| This is an instance of `deferring work in order to avoid | +| synchronization <http://www.cs.columbia.edu/~library/TR-repository/re | +| ports/reports-1992/cucs-039-92.ps.gz>`__. | +| Lazily recording CPU-hotplug events at the beginning of the next | +| grace period greatly simplifies maintenance of the CPU-tracking | +| bitmasks in the ``rcu_node`` tree. | ++-----------------------------------------------------------------------+ + +Expedited Grace Period Refinements +---------------------------------- + +Idle-CPU Checks +~~~~~~~~~~~~~~~ + +Each expedited grace period checks for idle CPUs when initially forming +the mask of CPUs to be IPIed and again just before IPIing a CPU (both +checks are carried out by ``sync_rcu_exp_select_cpus()``). If the CPU is +idle at any time between those two times, the CPU will not be IPIed. +Instead, the task pushing the grace period forward will include the idle +CPUs in the mask passed to ``rcu_report_exp_cpu_mult()``. + +For RCU-sched, there is an additional check: If the IPI has interrupted +the idle loop, then ``rcu_exp_handler()`` invokes +``rcu_report_exp_rdp()`` to report the corresponding quiescent state. + +For RCU-preempt, there is no specific check for idle in the IPI handler +(``rcu_exp_handler()``), but because RCU read-side critical sections are +not permitted within the idle loop, if ``rcu_exp_handler()`` sees that +the CPU is within RCU read-side critical section, the CPU cannot +possibly be idle. Otherwise, ``rcu_exp_handler()`` invokes +``rcu_report_exp_rdp()`` to report the corresponding quiescent state, +regardless of whether or not that quiescent state was due to the CPU +being idle. + +In summary, RCU expedited grace periods check for idle when building the +bitmask of CPUs that must be IPIed, just before sending each IPI, and +(either explicitly or implicitly) within the IPI handler. + +Batching via Sequence Counter +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +If each grace-period request was carried out separately, expedited grace +periods would have abysmal scalability and problematic high-load +characteristics. Because each grace-period operation can serve an +unlimited number of updates, it is important to *batch* requests, so +that a single expedited grace-period operation will cover all requests +in the corresponding batch. + +This batching is controlled by a sequence counter named +``->expedited_sequence`` in the ``rcu_state`` structure. This counter +has an odd value when there is an expedited grace period in progress and +an even value otherwise, so that dividing the counter value by two gives +the number of completed grace periods. During any given update request, +the counter must transition from even to odd and then back to even, thus +indicating that a grace period has elapsed. Therefore, if the initial +value of the counter is ``s``, the updater must wait until the counter +reaches at least the value ``(s+3)&~0x1``. This counter is managed by +the following access functions: + +#. ``rcu_exp_gp_seq_start()``, which marks the start of an expedited + grace period. +#. ``rcu_exp_gp_seq_end()``, which marks the end of an expedited grace + period. +#. ``rcu_exp_gp_seq_snap()``, which obtains a snapshot of the counter. +#. ``rcu_exp_gp_seq_done()``, which returns ``true`` if a full expedited + grace period has elapsed since the corresponding call to + ``rcu_exp_gp_seq_snap()``. + +Again, only one request in a given batch need actually carry out a +grace-period operation, which means there must be an efficient way to +identify which of many concurrent reqeusts will initiate the grace +period, and that there be an efficient way for the remaining requests to +wait for that grace period to complete. However, that is the topic of +the next section. + +Funnel Locking and Wait/Wakeup +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +The natural way to sort out which of a batch of updaters will initiate +the expedited grace period is to use the ``rcu_node`` combining tree, as +implemented by the ``exp_funnel_lock()`` function. The first updater +corresponding to a given grace period arriving at a given ``rcu_node`` +structure records its desired grace-period sequence number in the +``->exp_seq_rq`` field and moves up to the next level in the tree. +Otherwise, if the ``->exp_seq_rq`` field already contains the sequence +number for the desired grace period or some later one, the updater +blocks on one of four wait queues in the ``->exp_wq[]`` array, using the +second-from-bottom and third-from bottom bits as an index. An +``->exp_lock`` field in the ``rcu_node`` structure synchronizes access +to these fields. + +An empty ``rcu_node`` tree is shown in the following diagram, with the +white cells representing the ``->exp_seq_rq`` field and the red cells +representing the elements of the ``->exp_wq[]`` array. + +.. kernel-figure:: Funnel0.svg + +The next diagram shows the situation after the arrival of Task A and +Task B at the leftmost and rightmost leaf ``rcu_node`` structures, +respectively. The current value of the ``rcu_state`` structure's +``->expedited_sequence`` field is zero, so adding three and clearing the +bottom bit results in the value two, which both tasks record in the +``->exp_seq_rq`` field of their respective ``rcu_node`` structures: + +.. kernel-figure:: Funnel1.svg + +Each of Tasks A and B will move up to the root ``rcu_node`` structure. +Suppose that Task A wins, recording its desired grace-period sequence +number and resulting in the state shown below: + +.. kernel-figure:: Funnel2.svg + +Task A now advances to initiate a new grace period, while Task B moves +up to the root ``rcu_node`` structure, and, seeing that its desired +sequence number is already recorded, blocks on ``->exp_wq[1]``. + ++-----------------------------------------------------------------------+ +| **Quick Quiz**: | ++-----------------------------------------------------------------------+ +| Why ``->exp_wq[1]``? Given that the value of these tasks' desired | +| sequence number is two, so shouldn't they instead block on | +| ``->exp_wq[2]``? | ++-----------------------------------------------------------------------+ +| **Answer**: | ++-----------------------------------------------------------------------+ +| No. | +| Recall that the bottom bit of the desired sequence number indicates | +| whether or not a grace period is currently in progress. It is | +| therefore necessary to shift the sequence number right one bit | +| position to obtain the number of the grace period. This results in | +| ``->exp_wq[1]``. | ++-----------------------------------------------------------------------+ + +If Tasks C and D also arrive at this point, they will compute the same +desired grace-period sequence number, and see that both leaf +``rcu_node`` structures already have that value recorded. They will +therefore block on their respective ``rcu_node`` structures' +``->exp_wq[1]`` fields, as shown below: + +.. kernel-figure:: Funnel3.svg + +Task A now acquires the ``rcu_state`` structure's ``->exp_mutex`` and +initiates the grace period, which increments ``->expedited_sequence``. +Therefore, if Tasks E and F arrive, they will compute a desired sequence +number of 4 and will record this value as shown below: + +.. kernel-figure:: Funnel4.svg + +Tasks E and F will propagate up the ``rcu_node`` combining tree, with +Task F blocking on the root ``rcu_node`` structure and Task E wait for +Task A to finish so that it can start the next grace period. The +resulting state is as shown below: + +.. kernel-figure:: Funnel5.svg + +Once the grace period completes, Task A starts waking up the tasks +waiting for this grace period to complete, increments the +``->expedited_sequence``, acquires the ``->exp_wake_mutex`` and then +releases the ``->exp_mutex``. This results in the following state: + +.. kernel-figure:: Funnel6.svg + +Task E can then acquire ``->exp_mutex`` and increment +``->expedited_sequence`` to the value three. If new tasks G and H arrive +and moves up the combining tree at the same time, the state will be as +follows: + +.. kernel-figure:: Funnel7.svg + +Note that three of the root ``rcu_node`` structure's waitqueues are now +occupied. However, at some point, Task A will wake up the tasks blocked +on the ``->exp_wq`` waitqueues, resulting in the following state: + +.. kernel-figure:: Funnel8.svg + +Execution will continue with Tasks E and H completing their grace +periods and carrying out their wakeups. + ++-----------------------------------------------------------------------+ +| **Quick Quiz**: | ++-----------------------------------------------------------------------+ +| What happens if Task A takes so long to do its wakeups that Task E's | +| grace period completes? | ++-----------------------------------------------------------------------+ +| **Answer**: | ++-----------------------------------------------------------------------+ +| Then Task E will block on the ``->exp_wake_mutex``, which will also | +| prevent it from releasing ``->exp_mutex``, which in turn will prevent | +| the next grace period from starting. This last is important in | +| preventing overflow of the ``->exp_wq[]`` array. | ++-----------------------------------------------------------------------+ + +Use of Workqueues +~~~~~~~~~~~~~~~~~ + +In earlier implementations, the task requesting the expedited grace +period also drove it to completion. This straightforward approach had +the disadvantage of needing to account for POSIX signals sent to user +tasks, so more recent implemementations use the Linux kernel's +`workqueues <https://www.kernel.org/doc/Documentation/core-api/workqueue.rst>`__. + +The requesting task still does counter snapshotting and funnel-lock +processing, but the task reaching the top of the funnel lock does a +``schedule_work()`` (from ``_synchronize_rcu_expedited()`` so that a +workqueue kthread does the actual grace-period processing. Because +workqueue kthreads do not accept POSIX signals, grace-period-wait +processing need not allow for POSIX signals. In addition, this approach +allows wakeups for the previous expedited grace period to be overlapped +with processing for the next expedited grace period. Because there are +only four sets of waitqueues, it is necessary to ensure that the +previous grace period's wakeups complete before the next grace period's +wakeups start. This is handled by having the ``->exp_mutex`` guard +expedited grace-period processing and the ``->exp_wake_mutex`` guard +wakeups. The key point is that the ``->exp_mutex`` is not released until +the first wakeup is complete, which means that the ``->exp_wake_mutex`` +has already been acquired at that point. This approach ensures that the +previous grace period's wakeups can be carried out while the current +grace period is in process, but that these wakeups will complete before +the next grace period starts. This means that only three waitqueues are +required, guaranteeing that the four that are provided are sufficient. + +Stall Warnings +~~~~~~~~~~~~~~ + +Expediting grace periods does nothing to speed things up when RCU +readers take too long, and therefore expedited grace periods check for +stalls just as normal grace periods do. + ++-----------------------------------------------------------------------+ +| **Quick Quiz**: | ++-----------------------------------------------------------------------+ +| But why not just let the normal grace-period machinery detect the | +| stalls, given that a given reader must block both normal and | +| expedited grace periods? | ++-----------------------------------------------------------------------+ +| **Answer**: | ++-----------------------------------------------------------------------+ +| Because it is quite possible that at a given time there is no normal | +| grace period in progress, in which case the normal grace period | +| cannot emit a stall warning. | ++-----------------------------------------------------------------------+ + +The ``synchronize_sched_expedited_wait()`` function loops waiting for +the expedited grace period to end, but with a timeout set to the current +RCU CPU stall-warning time. If this time is exceeded, any CPUs or +``rcu_node`` structures blocking the current grace period are printed. +Each stall warning results in another pass through the loop, but the +second and subsequent passes use longer stall times. + +Mid-boot operation +~~~~~~~~~~~~~~~~~~ + +The use of workqueues has the advantage that the expedited grace-period +code need not worry about POSIX signals. Unfortunately, it has the +corresponding disadvantage that workqueues cannot be used until they are +initialized, which does not happen until some time after the scheduler +spawns the first task. Given that there are parts of the kernel that +really do want to execute grace periods during this mid-boot “dead +zone”, expedited grace periods must do something else during thie time. + +What they do is to fall back to the old practice of requiring that the +requesting task drive the expedited grace period, as was the case before +the use of workqueues. However, the requesting task is only required to +drive the grace period during the mid-boot dead zone. Before mid-boot, a +synchronous grace period is a no-op. Some time after mid-boot, +workqueues are used. + +Non-expedited non-SRCU synchronous grace periods must also operate +normally during mid-boot. This is handled by causing non-expedited grace +periods to take the expedited code path during mid-boot. + +The current code assumes that there are no POSIX signals during the +mid-boot dead zone. However, if an overwhelming need for POSIX signals +somehow arises, appropriate adjustments can be made to the expedited +stall-warning code. One such adjustment would reinstate the +pre-workqueue stall-warning checks, but only during the mid-boot dead +zone. + +With this refinement, synchronous grace periods can now be used from +task context pretty much any time during the life of the kernel. That +is, aside from some points in the suspend, hibernate, or shutdown code +path. + +Summary +~~~~~~~ + +Expedited grace periods use a sequence-number approach to promote +batching, so that a single grace-period operation can serve numerous +requests. A funnel lock is used to efficiently identify the one task out +of a concurrent group that will request the grace period. All members of +the group will block on waitqueues provided in the ``rcu_node`` +structure. The actual grace-period processing is carried out by a +workqueue. + +CPU-hotplug operations are noted lazily in order to prevent the need for +tight synchronization between expedited grace periods and CPU-hotplug +operations. The dyntick-idle counters are used to avoid sending IPIs to +idle CPUs, at least in the common case. RCU-preempt and RCU-sched use +different IPI handlers and different code to respond to the state +changes carried out by those handlers, but otherwise use common code. + +Quiescent states are tracked using the ``rcu_node`` tree, and once all +necessary quiescent states have been reported, all tasks waiting on this +expedited grace period are awakened. A pair of mutexes are used to allow +one grace period's wakeups to proceed concurrently with the next grace +period's processing. + +This combination of mechanisms allows expedited grace periods to run +reasonably efficiently. However, for non-time-critical tasks, normal +grace periods should be used instead because their longer duration +permits much higher degrees of batching, and thus much lower per-request +overheads. |