diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/admin-guide/thunderbolt.rst | |
parent | Initial commit. (diff) | |
download | linux-upstream/5.10.209.tar.xz linux-upstream/5.10.209.zip |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | Documentation/admin-guide/thunderbolt.rst | 284 |
1 files changed, 284 insertions, 0 deletions
diff --git a/Documentation/admin-guide/thunderbolt.rst b/Documentation/admin-guide/thunderbolt.rst new file mode 100644 index 000000000..613cb24c7 --- /dev/null +++ b/Documentation/admin-guide/thunderbolt.rst @@ -0,0 +1,284 @@ +.. SPDX-License-Identifier: GPL-2.0 + +====================== + USB4 and Thunderbolt +====================== +USB4 is the public specification based on Thunderbolt 3 protocol with +some differences at the register level among other things. Connection +manager is an entity running on the host router (host controller) +responsible for enumerating routers and establishing tunnels. A +connection manager can be implemented either in firmware or software. +Typically PCs come with a firmware connection manager for Thunderbolt 3 +and early USB4 capable systems. Apple systems on the other hand use +software connection manager and the later USB4 compliant devices follow +the suit. + +The Linux Thunderbolt driver supports both and can detect at runtime which +connection manager implementation is to be used. To be on the safe side the +software connection manager in Linux also advertises security level +``user`` which means PCIe tunneling is disabled by default. The +documentation below applies to both implementations with the exception that +the software connection manager only supports ``user`` security level and +is expected to be accompanied with an IOMMU based DMA protection. + +Security levels and how to use them +----------------------------------- +The interface presented here is not meant for end users. Instead there +should be a userspace tool that handles all the low-level details, keeps +a database of the authorized devices and prompts users for new connections. + +More details about the sysfs interface for Thunderbolt devices can be +found in ``Documentation/ABI/testing/sysfs-bus-thunderbolt``. + +Those users who just want to connect any device without any sort of +manual work can add following line to +``/etc/udev/rules.d/99-local.rules``:: + + ACTION=="add", SUBSYSTEM=="thunderbolt", ATTR{authorized}=="0", ATTR{authorized}="1" + +This will authorize all devices automatically when they appear. However, +keep in mind that this bypasses the security levels and makes the system +vulnerable to DMA attacks. + +Starting with Intel Falcon Ridge Thunderbolt controller there are 4 +security levels available. Intel Titan Ridge added one more security level +(usbonly). The reason for these is the fact that the connected devices can +be DMA masters and thus read contents of the host memory without CPU and OS +knowing about it. There are ways to prevent this by setting up an IOMMU but +it is not always available for various reasons. + +The security levels are as follows: + + none + All devices are automatically connected by the firmware. No user + approval is needed. In BIOS settings this is typically called + *Legacy mode*. + + user + User is asked whether the device is allowed to be connected. + Based on the device identification information available through + ``/sys/bus/thunderbolt/devices``, the user then can make the decision. + In BIOS settings this is typically called *Unique ID*. + + secure + User is asked whether the device is allowed to be connected. In + addition to UUID the device (if it supports secure connect) is sent + a challenge that should match the expected one based on a random key + written to the ``key`` sysfs attribute. In BIOS settings this is + typically called *One time saved key*. + + dponly + The firmware automatically creates tunnels for Display Port and + USB. No PCIe tunneling is done. In BIOS settings this is + typically called *Display Port Only*. + + usbonly + The firmware automatically creates tunnels for the USB controller and + Display Port in a dock. All PCIe links downstream of the dock are + removed. + +The current security level can be read from +``/sys/bus/thunderbolt/devices/domainX/security`` where ``domainX`` is +the Thunderbolt domain the host controller manages. There is typically +one domain per Thunderbolt host controller. + +If the security level reads as ``user`` or ``secure`` the connected +device must be authorized by the user before PCIe tunnels are created +(e.g the PCIe device appears). + +Each Thunderbolt device plugged in will appear in sysfs under +``/sys/bus/thunderbolt/devices``. The device directory carries +information that can be used to identify the particular device, +including its name and UUID. + +Authorizing devices when security level is ``user`` or ``secure`` +----------------------------------------------------------------- +When a device is plugged in it will appear in sysfs as follows:: + + /sys/bus/thunderbolt/devices/0-1/authorized - 0 + /sys/bus/thunderbolt/devices/0-1/device - 0x8004 + /sys/bus/thunderbolt/devices/0-1/device_name - Thunderbolt to FireWire Adapter + /sys/bus/thunderbolt/devices/0-1/vendor - 0x1 + /sys/bus/thunderbolt/devices/0-1/vendor_name - Apple, Inc. + /sys/bus/thunderbolt/devices/0-1/unique_id - e0376f00-0300-0100-ffff-ffffffffffff + +The ``authorized`` attribute reads 0 which means no PCIe tunnels are +created yet. The user can authorize the device by simply entering:: + + # echo 1 > /sys/bus/thunderbolt/devices/0-1/authorized + +This will create the PCIe tunnels and the device is now connected. + +If the device supports secure connect, and the domain security level is +set to ``secure``, it has an additional attribute ``key`` which can hold +a random 32-byte value used for authorization and challenging the device in +future connects:: + + /sys/bus/thunderbolt/devices/0-3/authorized - 0 + /sys/bus/thunderbolt/devices/0-3/device - 0x305 + /sys/bus/thunderbolt/devices/0-3/device_name - AKiTiO Thunder3 PCIe Box + /sys/bus/thunderbolt/devices/0-3/key - + /sys/bus/thunderbolt/devices/0-3/vendor - 0x41 + /sys/bus/thunderbolt/devices/0-3/vendor_name - inXtron + /sys/bus/thunderbolt/devices/0-3/unique_id - dc010000-0000-8508-a22d-32ca6421cb16 + +Notice the key is empty by default. + +If the user does not want to use secure connect they can just ``echo 1`` +to the ``authorized`` attribute and the PCIe tunnels will be created in +the same way as in the ``user`` security level. + +If the user wants to use secure connect, the first time the device is +plugged a key needs to be created and sent to the device:: + + # key=$(openssl rand -hex 32) + # echo $key > /sys/bus/thunderbolt/devices/0-3/key + # echo 1 > /sys/bus/thunderbolt/devices/0-3/authorized + +Now the device is connected (PCIe tunnels are created) and in addition +the key is stored on the device NVM. + +Next time the device is plugged in the user can verify (challenge) the +device using the same key:: + + # echo $key > /sys/bus/thunderbolt/devices/0-3/key + # echo 2 > /sys/bus/thunderbolt/devices/0-3/authorized + +If the challenge the device returns back matches the one we expect based +on the key, the device is connected and the PCIe tunnels are created. +However, if the challenge fails no tunnels are created and error is +returned to the user. + +If the user still wants to connect the device they can either approve +the device without a key or write a new key and write 1 to the +``authorized`` file to get the new key stored on the device NVM. + +DMA protection utilizing IOMMU +------------------------------ +Recent systems from 2018 and forward with Thunderbolt ports may natively +support IOMMU. This means that Thunderbolt security is handled by an IOMMU +so connected devices cannot access memory regions outside of what is +allocated for them by drivers. When Linux is running on such system it +automatically enables IOMMU if not enabled by the user already. These +systems can be identified by reading ``1`` from +``/sys/bus/thunderbolt/devices/domainX/iommu_dma_protection`` attribute. + +The driver does not do anything special in this case but because DMA +protection is handled by the IOMMU, security levels (if set) are +redundant. For this reason some systems ship with security level set to +``none``. Other systems have security level set to ``user`` in order to +support downgrade to older OS, so users who want to automatically +authorize devices when IOMMU DMA protection is enabled can use the +following ``udev`` rule:: + + ACTION=="add", SUBSYSTEM=="thunderbolt", ATTRS{iommu_dma_protection}=="1", ATTR{authorized}=="0", ATTR{authorized}="1" + +Upgrading NVM on Thunderbolt device, host or retimer +---------------------------------------------------- +Since most of the functionality is handled in firmware running on a +host controller or a device, it is important that the firmware can be +upgraded to the latest where possible bugs in it have been fixed. +Typically OEMs provide this firmware from their support site. + +There is also a central site which has links where to download firmware +for some machines: + + `Thunderbolt Updates <https://thunderbolttechnology.net/updates>`_ + +Before you upgrade firmware on a device, host or retimer, please make +sure it is a suitable upgrade. Failing to do that may render the device +in a state where it cannot be used properly anymore without special +tools! + +Host NVM upgrade on Apple Macs is not supported. + +Once the NVM image has been downloaded, you need to plug in a +Thunderbolt device so that the host controller appears. It does not +matter which device is connected (unless you are upgrading NVM on a +device - then you need to connect that particular device). + +Note an OEM-specific method to power the controller up ("force power") may +be available for your system in which case there is no need to plug in a +Thunderbolt device. + +After that we can write the firmware to the non-active parts of the NVM +of the host or device. As an example here is how Intel NUC6i7KYK (Skull +Canyon) Thunderbolt controller NVM is upgraded:: + + # dd if=KYK_TBT_FW_0018.bin of=/sys/bus/thunderbolt/devices/0-0/nvm_non_active0/nvmem + +Once the operation completes we can trigger NVM authentication and +upgrade process as follows:: + + # echo 1 > /sys/bus/thunderbolt/devices/0-0/nvm_authenticate + +If no errors are returned, the host controller shortly disappears. Once +it comes back the driver notices it and initiates a full power cycle. +After a while the host controller appears again and this time it should +be fully functional. + +We can verify that the new NVM firmware is active by running the following +commands:: + + # cat /sys/bus/thunderbolt/devices/0-0/nvm_authenticate + 0x0 + # cat /sys/bus/thunderbolt/devices/0-0/nvm_version + 18.0 + +If ``nvm_authenticate`` contains anything other than 0x0 it is the error +code from the last authentication cycle, which means the authentication +of the NVM image failed. + +Note names of the NVMem devices ``nvm_activeN`` and ``nvm_non_activeN`` +depend on the order they are registered in the NVMem subsystem. N in +the name is the identifier added by the NVMem subsystem. + +Upgrading NVM when host controller is in safe mode +-------------------------------------------------- +If the existing NVM is not properly authenticated (or is missing) the +host controller goes into safe mode which means that the only available +functionality is flashing a new NVM image. When in this mode, reading +``nvm_version`` fails with ``ENODATA`` and the device identification +information is missing. + +To recover from this mode, one needs to flash a valid NVM image to the +host controller in the same way it is done in the previous chapter. + +Networking over Thunderbolt cable +--------------------------------- +Thunderbolt technology allows software communication between two hosts +connected by a Thunderbolt cable. + +It is possible to tunnel any kind of traffic over a Thunderbolt link but +currently we only support Apple ThunderboltIP protocol. + +If the other host is running Windows or macOS, the only thing you need to +do is to connect a Thunderbolt cable between the two hosts; the +``thunderbolt-net`` driver is loaded automatically. If the other host is +also Linux you should load ``thunderbolt-net`` manually on one host (it +does not matter which one):: + + # modprobe thunderbolt-net + +This triggers module load on the other host automatically. If the driver +is built-in to the kernel image, there is no need to do anything. + +The driver will create one virtual ethernet interface per Thunderbolt +port which are named like ``thunderbolt0`` and so on. From this point +you can either use standard userspace tools like ``ifconfig`` to +configure the interface or let your GUI handle it automatically. + +Forcing power +------------- +Many OEMs include a method that can be used to force the power of a +Thunderbolt controller to an "On" state even if nothing is connected. +If supported by your machine this will be exposed by the WMI bus with +a sysfs attribute called "force_power". + +For example the intel-wmi-thunderbolt driver exposes this attribute in: + /sys/bus/wmi/devices/86CCFD48-205E-4A77-9C48-2021CBEDE341/force_power + + To force the power to on, write 1 to this attribute file. + To disable force power, write 0 to this attribute file. + +Note: it's currently not possible to query the force power state of a platform. |