diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/core-api/cpu_hotplug.rst | |
parent | Initial commit. (diff) | |
download | linux-upstream/5.10.209.tar.xz linux-upstream/5.10.209.zip |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | Documentation/core-api/cpu_hotplug.rst | 365 |
1 files changed, 365 insertions, 0 deletions
diff --git a/Documentation/core-api/cpu_hotplug.rst b/Documentation/core-api/cpu_hotplug.rst new file mode 100644 index 000000000..a2c96bec5 --- /dev/null +++ b/Documentation/core-api/cpu_hotplug.rst @@ -0,0 +1,365 @@ +========================= +CPU hotplug in the Kernel +========================= + +:Date: December, 2016 +:Author: Sebastian Andrzej Siewior <bigeasy@linutronix.de>, + Rusty Russell <rusty@rustcorp.com.au>, + Srivatsa Vaddagiri <vatsa@in.ibm.com>, + Ashok Raj <ashok.raj@intel.com>, + Joel Schopp <jschopp@austin.ibm.com> + +Introduction +============ + +Modern advances in system architectures have introduced advanced error +reporting and correction capabilities in processors. There are couple OEMS that +support NUMA hardware which are hot pluggable as well, where physical node +insertion and removal require support for CPU hotplug. + +Such advances require CPUs available to a kernel to be removed either for +provisioning reasons, or for RAS purposes to keep an offending CPU off +system execution path. Hence the need for CPU hotplug support in the +Linux kernel. + +A more novel use of CPU-hotplug support is its use today in suspend resume +support for SMP. Dual-core and HT support makes even a laptop run SMP kernels +which didn't support these methods. + + +Command Line Switches +===================== +``maxcpus=n`` + Restrict boot time CPUs to *n*. Say if you have four CPUs, using + ``maxcpus=2`` will only boot two. You can choose to bring the + other CPUs later online. + +``nr_cpus=n`` + Restrict the total amount of CPUs the kernel will support. If the number + supplied here is lower than the number of physically available CPUs, then + those CPUs can not be brought online later. + +``additional_cpus=n`` + Use this to limit hotpluggable CPUs. This option sets + ``cpu_possible_mask = cpu_present_mask + additional_cpus`` + + This option is limited to the IA64 architecture. + +``possible_cpus=n`` + This option sets ``possible_cpus`` bits in ``cpu_possible_mask``. + + This option is limited to the X86 and S390 architecture. + +``cpu0_hotplug`` + Allow to shutdown CPU0. + + This option is limited to the X86 architecture. + +CPU maps +======== + +``cpu_possible_mask`` + Bitmap of possible CPUs that can ever be available in the + system. This is used to allocate some boot time memory for per_cpu variables + that aren't designed to grow/shrink as CPUs are made available or removed. + Once set during boot time discovery phase, the map is static, i.e no bits + are added or removed anytime. Trimming it accurately for your system needs + upfront can save some boot time memory. + +``cpu_online_mask`` + Bitmap of all CPUs currently online. Its set in ``__cpu_up()`` + after a CPU is available for kernel scheduling and ready to receive + interrupts from devices. Its cleared when a CPU is brought down using + ``__cpu_disable()``, before which all OS services including interrupts are + migrated to another target CPU. + +``cpu_present_mask`` + Bitmap of CPUs currently present in the system. Not all + of them may be online. When physical hotplug is processed by the relevant + subsystem (e.g ACPI) can change and new bit either be added or removed + from the map depending on the event is hot-add/hot-remove. There are currently + no locking rules as of now. Typical usage is to init topology during boot, + at which time hotplug is disabled. + +You really don't need to manipulate any of the system CPU maps. They should +be read-only for most use. When setting up per-cpu resources almost always use +``cpu_possible_mask`` or ``for_each_possible_cpu()`` to iterate. To macro +``for_each_cpu()`` can be used to iterate over a custom CPU mask. + +Never use anything other than ``cpumask_t`` to represent bitmap of CPUs. + + +Using CPU hotplug +================= +The kernel option *CONFIG_HOTPLUG_CPU* needs to be enabled. It is currently +available on multiple architectures including ARM, MIPS, PowerPC and X86. The +configuration is done via the sysfs interface: :: + + $ ls -lh /sys/devices/system/cpu + total 0 + drwxr-xr-x 9 root root 0 Dec 21 16:33 cpu0 + drwxr-xr-x 9 root root 0 Dec 21 16:33 cpu1 + drwxr-xr-x 9 root root 0 Dec 21 16:33 cpu2 + drwxr-xr-x 9 root root 0 Dec 21 16:33 cpu3 + drwxr-xr-x 9 root root 0 Dec 21 16:33 cpu4 + drwxr-xr-x 9 root root 0 Dec 21 16:33 cpu5 + drwxr-xr-x 9 root root 0 Dec 21 16:33 cpu6 + drwxr-xr-x 9 root root 0 Dec 21 16:33 cpu7 + drwxr-xr-x 2 root root 0 Dec 21 16:33 hotplug + -r--r--r-- 1 root root 4.0K Dec 21 16:33 offline + -r--r--r-- 1 root root 4.0K Dec 21 16:33 online + -r--r--r-- 1 root root 4.0K Dec 21 16:33 possible + -r--r--r-- 1 root root 4.0K Dec 21 16:33 present + +The files *offline*, *online*, *possible*, *present* represent the CPU masks. +Each CPU folder contains an *online* file which controls the logical on (1) and +off (0) state. To logically shutdown CPU4: :: + + $ echo 0 > /sys/devices/system/cpu/cpu4/online + smpboot: CPU 4 is now offline + +Once the CPU is shutdown, it will be removed from */proc/interrupts*, +*/proc/cpuinfo* and should also not be shown visible by the *top* command. To +bring CPU4 back online: :: + + $ echo 1 > /sys/devices/system/cpu/cpu4/online + smpboot: Booting Node 0 Processor 4 APIC 0x1 + +The CPU is usable again. This should work on all CPUs. CPU0 is often special +and excluded from CPU hotplug. On X86 the kernel option +*CONFIG_BOOTPARAM_HOTPLUG_CPU0* has to be enabled in order to be able to +shutdown CPU0. Alternatively the kernel command option *cpu0_hotplug* can be +used. Some known dependencies of CPU0: + +* Resume from hibernate/suspend. Hibernate/suspend will fail if CPU0 is offline. +* PIC interrupts. CPU0 can't be removed if a PIC interrupt is detected. + +Please let Fenghua Yu <fenghua.yu@intel.com> know if you find any dependencies +on CPU0. + +The CPU hotplug coordination +============================ + +The offline case +---------------- +Once a CPU has been logically shutdown the teardown callbacks of registered +hotplug states will be invoked, starting with ``CPUHP_ONLINE`` and terminating +at state ``CPUHP_OFFLINE``. This includes: + +* If tasks are frozen due to a suspend operation then *cpuhp_tasks_frozen* + will be set to true. +* All processes are migrated away from this outgoing CPU to new CPUs. + The new CPU is chosen from each process' current cpuset, which may be + a subset of all online CPUs. +* All interrupts targeted to this CPU are migrated to a new CPU +* timers are also migrated to a new CPU +* Once all services are migrated, kernel calls an arch specific routine + ``__cpu_disable()`` to perform arch specific cleanup. + +Using the hotplug API +--------------------- +It is possible to receive notifications once a CPU is offline or onlined. This +might be important to certain drivers which need to perform some kind of setup +or clean up functions based on the number of available CPUs: :: + + #include <linux/cpuhotplug.h> + + ret = cpuhp_setup_state(CPUHP_AP_ONLINE_DYN, "X/Y:online", + Y_online, Y_prepare_down); + +*X* is the subsystem and *Y* the particular driver. The *Y_online* callback +will be invoked during registration on all online CPUs. If an error +occurs during the online callback the *Y_prepare_down* callback will be +invoked on all CPUs on which the online callback was previously invoked. +After registration completed, the *Y_online* callback will be invoked +once a CPU is brought online and *Y_prepare_down* will be invoked when a +CPU is shutdown. All resources which were previously allocated in +*Y_online* should be released in *Y_prepare_down*. +The return value *ret* is negative if an error occurred during the +registration process. Otherwise a positive value is returned which +contains the allocated hotplug for dynamically allocated states +(*CPUHP_AP_ONLINE_DYN*). It will return zero for predefined states. + +The callback can be remove by invoking ``cpuhp_remove_state()``. In case of a +dynamically allocated state (*CPUHP_AP_ONLINE_DYN*) use the returned state. +During the removal of a hotplug state the teardown callback will be invoked. + +Multiple instances +~~~~~~~~~~~~~~~~~~ +If a driver has multiple instances and each instance needs to perform the +callback independently then it is likely that a ''multi-state'' should be used. +First a multi-state state needs to be registered: :: + + ret = cpuhp_setup_state_multi(CPUHP_AP_ONLINE_DYN, "X/Y:online, + Y_online, Y_prepare_down); + Y_hp_online = ret; + +The ``cpuhp_setup_state_multi()`` behaves similar to ``cpuhp_setup_state()`` +except it prepares the callbacks for a multi state and does not invoke +the callbacks. This is a one time setup. +Once a new instance is allocated, you need to register this new instance: :: + + ret = cpuhp_state_add_instance(Y_hp_online, &d->node); + +This function will add this instance to your previously allocated +*Y_hp_online* state and invoke the previously registered callback +(*Y_online*) on all online CPUs. The *node* element is a ``struct +hlist_node`` member of your per-instance data structure. + +On removal of the instance: :: + cpuhp_state_remove_instance(Y_hp_online, &d->node) + +should be invoked which will invoke the teardown callback on all online +CPUs. + +Manual setup +~~~~~~~~~~~~ +Usually it is handy to invoke setup and teardown callbacks on registration or +removal of a state because usually the operation needs to performed once a CPU +goes online (offline) and during initial setup (shutdown) of the driver. However +each registration and removal function is also available with a ``_nocalls`` +suffix which does not invoke the provided callbacks if the invocation of the +callbacks is not desired. During the manual setup (or teardown) the functions +``get_online_cpus()`` and ``put_online_cpus()`` should be used to inhibit CPU +hotplug operations. + + +The ordering of the events +-------------------------- +The hotplug states are defined in ``include/linux/cpuhotplug.h``: + +* The states *CPUHP_OFFLINE* … *CPUHP_AP_OFFLINE* are invoked before the + CPU is up. +* The states *CPUHP_AP_OFFLINE* … *CPUHP_AP_ONLINE* are invoked + just the after the CPU has been brought up. The interrupts are off and + the scheduler is not yet active on this CPU. Starting with *CPUHP_AP_OFFLINE* + the callbacks are invoked on the target CPU. +* The states between *CPUHP_AP_ONLINE_DYN* and *CPUHP_AP_ONLINE_DYN_END* are + reserved for the dynamic allocation. +* The states are invoked in the reverse order on CPU shutdown starting with + *CPUHP_ONLINE* and stopping at *CPUHP_OFFLINE*. Here the callbacks are + invoked on the CPU that will be shutdown until *CPUHP_AP_OFFLINE*. + +A dynamically allocated state via *CPUHP_AP_ONLINE_DYN* is often enough. +However if an earlier invocation during the bring up or shutdown is required +then an explicit state should be acquired. An explicit state might also be +required if the hotplug event requires specific ordering in respect to +another hotplug event. + +Testing of hotplug states +========================= +One way to verify whether a custom state is working as expected or not is to +shutdown a CPU and then put it online again. It is also possible to put the CPU +to certain state (for instance *CPUHP_AP_ONLINE*) and then go back to +*CPUHP_ONLINE*. This would simulate an error one state after *CPUHP_AP_ONLINE* +which would lead to rollback to the online state. + +All registered states are enumerated in ``/sys/devices/system/cpu/hotplug/states``: :: + + $ tail /sys/devices/system/cpu/hotplug/states + 138: mm/vmscan:online + 139: mm/vmstat:online + 140: lib/percpu_cnt:online + 141: acpi/cpu-drv:online + 142: base/cacheinfo:online + 143: virtio/net:online + 144: x86/mce:online + 145: printk:online + 168: sched:active + 169: online + +To rollback CPU4 to ``lib/percpu_cnt:online`` and back online just issue: :: + + $ cat /sys/devices/system/cpu/cpu4/hotplug/state + 169 + $ echo 140 > /sys/devices/system/cpu/cpu4/hotplug/target + $ cat /sys/devices/system/cpu/cpu4/hotplug/state + 140 + +It is important to note that the teardown callbac of state 140 have been +invoked. And now get back online: :: + + $ echo 169 > /sys/devices/system/cpu/cpu4/hotplug/target + $ cat /sys/devices/system/cpu/cpu4/hotplug/state + 169 + +With trace events enabled, the individual steps are visible, too: :: + + # TASK-PID CPU# TIMESTAMP FUNCTION + # | | | | | + bash-394 [001] 22.976: cpuhp_enter: cpu: 0004 target: 140 step: 169 (cpuhp_kick_ap_work) + cpuhp/4-31 [004] 22.977: cpuhp_enter: cpu: 0004 target: 140 step: 168 (sched_cpu_deactivate) + cpuhp/4-31 [004] 22.990: cpuhp_exit: cpu: 0004 state: 168 step: 168 ret: 0 + cpuhp/4-31 [004] 22.991: cpuhp_enter: cpu: 0004 target: 140 step: 144 (mce_cpu_pre_down) + cpuhp/4-31 [004] 22.992: cpuhp_exit: cpu: 0004 state: 144 step: 144 ret: 0 + cpuhp/4-31 [004] 22.993: cpuhp_multi_enter: cpu: 0004 target: 140 step: 143 (virtnet_cpu_down_prep) + cpuhp/4-31 [004] 22.994: cpuhp_exit: cpu: 0004 state: 143 step: 143 ret: 0 + cpuhp/4-31 [004] 22.995: cpuhp_enter: cpu: 0004 target: 140 step: 142 (cacheinfo_cpu_pre_down) + cpuhp/4-31 [004] 22.996: cpuhp_exit: cpu: 0004 state: 142 step: 142 ret: 0 + bash-394 [001] 22.997: cpuhp_exit: cpu: 0004 state: 140 step: 169 ret: 0 + bash-394 [005] 95.540: cpuhp_enter: cpu: 0004 target: 169 step: 140 (cpuhp_kick_ap_work) + cpuhp/4-31 [004] 95.541: cpuhp_enter: cpu: 0004 target: 169 step: 141 (acpi_soft_cpu_online) + cpuhp/4-31 [004] 95.542: cpuhp_exit: cpu: 0004 state: 141 step: 141 ret: 0 + cpuhp/4-31 [004] 95.543: cpuhp_enter: cpu: 0004 target: 169 step: 142 (cacheinfo_cpu_online) + cpuhp/4-31 [004] 95.544: cpuhp_exit: cpu: 0004 state: 142 step: 142 ret: 0 + cpuhp/4-31 [004] 95.545: cpuhp_multi_enter: cpu: 0004 target: 169 step: 143 (virtnet_cpu_online) + cpuhp/4-31 [004] 95.546: cpuhp_exit: cpu: 0004 state: 143 step: 143 ret: 0 + cpuhp/4-31 [004] 95.547: cpuhp_enter: cpu: 0004 target: 169 step: 144 (mce_cpu_online) + cpuhp/4-31 [004] 95.548: cpuhp_exit: cpu: 0004 state: 144 step: 144 ret: 0 + cpuhp/4-31 [004] 95.549: cpuhp_enter: cpu: 0004 target: 169 step: 145 (console_cpu_notify) + cpuhp/4-31 [004] 95.550: cpuhp_exit: cpu: 0004 state: 145 step: 145 ret: 0 + cpuhp/4-31 [004] 95.551: cpuhp_enter: cpu: 0004 target: 169 step: 168 (sched_cpu_activate) + cpuhp/4-31 [004] 95.552: cpuhp_exit: cpu: 0004 state: 168 step: 168 ret: 0 + bash-394 [005] 95.553: cpuhp_exit: cpu: 0004 state: 169 step: 140 ret: 0 + +As it an be seen, CPU4 went down until timestamp 22.996 and then back up until +95.552. All invoked callbacks including their return codes are visible in the +trace. + +Architecture's requirements +=========================== +The following functions and configurations are required: + +``CONFIG_HOTPLUG_CPU`` + This entry needs to be enabled in Kconfig + +``__cpu_up()`` + Arch interface to bring up a CPU + +``__cpu_disable()`` + Arch interface to shutdown a CPU, no more interrupts can be handled by the + kernel after the routine returns. This includes the shutdown of the timer. + +``__cpu_die()`` + This actually supposed to ensure death of the CPU. Actually look at some + example code in other arch that implement CPU hotplug. The processor is taken + down from the ``idle()`` loop for that specific architecture. ``__cpu_die()`` + typically waits for some per_cpu state to be set, to ensure the processor dead + routine is called to be sure positively. + +User Space Notification +======================= +After CPU successfully onlined or offline udev events are sent. A udev rule like: :: + + SUBSYSTEM=="cpu", DRIVERS=="processor", DEVPATH=="/devices/system/cpu/*", RUN+="the_hotplug_receiver.sh" + +will receive all events. A script like: :: + + #!/bin/sh + + if [ "${ACTION}" = "offline" ] + then + echo "CPU ${DEVPATH##*/} offline" + + elif [ "${ACTION}" = "online" ] + then + echo "CPU ${DEVPATH##*/} online" + + fi + +can process the event further. + +Kernel Inline Documentations Reference +====================================== + +.. kernel-doc:: include/linux/cpuhotplug.h |