Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

14 files changed, 833 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
new file mode 100644
index 000000000..812ae8cc5
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/bcm2835.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/bcm2835.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM2711/BCM2835 Platforms Device Tree Bindings
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+  - Stefan Wahren <wahrenst@gmx.net>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: BCM2711 based Boards
+        items:
+          - enum:
+              - raspberrypi,4-model-b
+          - const: brcm,bcm2711
+
+      - description: BCM2835 based Boards
+        items:
+          - enum:
+              - raspberrypi,model-a
+              - raspberrypi,model-a-plus
+              - raspberrypi,model-b
+              - raspberrypi,model-b-i2c0  # Raspberry Pi Model B (no P5)
+              - raspberrypi,model-b-rev2
+              - raspberrypi,model-b-plus
+              - raspberrypi,compute-module
+              - raspberrypi,model-zero
+              - raspberrypi,model-zero-w
+          - const: brcm,bcm2835
+
+      - description: BCM2836 based Boards
+        items:
+          - enum:
+              - raspberrypi,2-model-b
+          - const: brcm,bcm2836
+
+      - description: BCM2837 based Boards
+        items:
+          - enum:
+              - raspberrypi,3-model-a-plus
+              - raspberrypi,3-model-b
+              - raspberrypi,3-model-b-plus
+              - raspberrypi,3-compute-module
+              - raspberrypi,3-compute-module-lite
+          - const: brcm,bcm2837
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml
new file mode 100644
index 000000000..c60324357
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm11351.yaml
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm11351.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM11351 device tree bindings
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm28155-ap
+      - const: brcm,bcm11351
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml
new file mode 100644
index 000000000..b30207573
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm21664.yaml
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm21664.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM21664 device tree bindings
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm21664-garnet
+      - const: brcm,bcm21664
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml
new file mode 100644
index 000000000..37f3a6fcd
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm23550.yaml
@@ -0,0 +1,23 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm23550.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM23550 device tree bindings
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm23550-sparrow
+      - const: brcm,bcm23550
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
new file mode 100644
index 000000000..434d3c6db
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm4708.yaml
@@ -0,0 +1,93 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,bcm4708.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom BCM4708 device tree bindings
+
+description:
+  Broadcom BCM4708/47081/4709/47094/53012 Wi-Fi/network SoCs based
+  on the iProc architecture (Northstar).
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+  - Hauke Mehrtens <hauke@hauke-m.de>
+  - Rafal Milecki <zajec5@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    oneOf:
+      - description: BCM4708 based boards
+        items:
+          - enum:
+              - asus,rt-ac56u
+              - asus,rt-ac68u
+              - buffalo,wzr-1750dhp
+              - linksys,ea6300-v1
+              - linksys,ea6500-v2
+              - luxul,xap-1510v1
+              - luxul,xwc-1000
+              - netgear,r6250v1
+              - netgear,r6300v2
+              - smartrg,sr400ac
+              - brcm,bcm94708
+          - const: brcm,bcm4708
+
+      - description: BCM47081 based boards
+        items:
+          - enum:
+              - asus,rt-n18u
+              - buffalo,wzr-600dhp2
+              - buffalo,wzr-900dhp
+              - luxul,xap-1410v1
+              - luxul,xwr-1200v1
+              - tplink,archer-c5-v2
+          - const: brcm,bcm47081
+          - const: brcm,bcm4708
+
+      - description: BCM4709 based boards
+        items:
+          - enum:
+              - asus,rt-ac87u
+              - buffalo,wxr-1900dhp
+              - linksys,ea9200
+              - netgear,r7000
+              - netgear,r8000
+              - tplink,archer-c9-v1
+              - brcm,bcm94709
+          - const: brcm,bcm4709
+          - const: brcm,bcm4708
+
+      - description: BCM47094 based boards
+        items:
+          - enum:
+              - dlink,dir-885l
+              - linksys,panamera
+              - luxul,abr-4500-v1
+              - luxul,xap-1610-v1
+              - luxul,xbr-4500-v1
+              - luxul,xwc-2000-v1
+              - luxul,xwr-3100v1
+              - luxul,xwr-3150-v1
+              - netgear,r8500
+              - phicomm,k3
+          - const: brcm,bcm47094
+          - const: brcm,bcm4708
+
+      - description: BCM53012 based boards
+        items:
+          - enum:
+              - brcm,bcm953012er
+              - brcm,bcm953012hr
+              - brcm,bcm953012k
+              - meraki,mr32
+          - const: brcm,brcm53012
+          - const: brcm,brcm53016
+          - const: brcm,bcm4708
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt
new file mode 100644
index 000000000..8c7a4908a
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,bcm63138.txt
@@ -0,0 +1,85 @@
+Broadcom BCM63138 DSL System-on-a-Chip device tree bindings
+-----------------------------------------------------------
+
+Boards compatible with the BCM63138 DSL System-on-a-Chip should have the
+following properties:
+
+Required root node property:
+
+compatible: should be "brcm,bcm63138"
+
+An optional Boot lookup table Device Tree node is required for secondary CPU
+initialization as well as a 'resets' phandle to the correct PMB controller as
+defined in reset/brcm,bcm63138-pmb.txt for this secondary CPU, and an
+'enable-method' property.
+
+Required properties for the Boot lookup table node:
+- compatible: should be "brcm,bcm63138-bootlut"
+- reg: register base address and length for the Boot Lookup table
+
+Optional properties for the primary CPU node:
+- enable-method: should be "brcm,bcm63138"
+
+Optional properties for the secondary CPU node:
+- enable-method: should be "brcm,bcm63138"
+- resets: phandle to the relevant PMB controller, one integer indicating the internal
+  bus number, and a second integer indicating the address of the CPU in the PMB
+  internal bus number.
+
+Example:
+
+	cpus {
+		cpu@0 {
+			compatible = "arm,cotex-a9";
+			reg = <0>;
+			...
+			enable-method = "brcm,bcm63138";
+		};
+
+		cpu@1 {
+			compatible = "arm,cortex-a9";
+			reg = <1>;
+			...
+			enable-method = "brcm,bcm63138";
+			resets = <&pmb0 4 1>;
+		};
+	};
+
+	bootlut: bootlut@8000 {
+		compatible = "brcm,bcm63138-bootlut";
+		reg = <0x8000 0x50>;
+	};
+
+=======
+reboot
+------
+Two nodes are required for software reboot: a timer node and a syscon-reboot node.
+
+Timer node:
+
+- compatible: Must be "brcm,bcm6328-timer", "syscon"
+- reg: Register base address and length
+
+Syscon reboot node:
+
+See Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml for the
+detailed list of properties, the two values defined below are specific to the
+BCM6328-style timer:
+
+- offset: Should be 0x34 to denote the offset of the TIMER_WD_TIMER_RESET register
+  from the beginning of the TIMER block
+- mask: Should be 1 for the SoftRst bit.
+
+Example:
+
+	timer: timer@80 {
+		compatible = "brcm,bcm6328-timer", "syscon";
+		reg = <0x80 0x3c>;
+	};
+
+	reboot {
+		compatible = "syscon-reboot";
+		regmap = <&timer>;
+		offset = <0x34>;
+		mask = <0x1>;
+	};
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
new file mode 100644
index 000000000..104cc9b41
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,brcmstb.txt
@@ -0,0 +1,265 @@
+ARM Broadcom STB platforms Device Tree Bindings
+-----------------------------------------------
+Boards with Broadcom Brahma15 ARM-based BCMxxxx (generally BCM7xxx variants)
+SoC shall have the following DT organization:
+
+Required root node properties:
+    - compatible: "brcm,bcm<chip_id>", "brcm,brcmstb"
+
+example:
+/ {
+    #address-cells = <2>;
+    #size-cells = <2>;
+    model = "Broadcom STB (bcm7445)";
+    compatible = "brcm,bcm7445", "brcm,brcmstb";
+
+Further, syscon nodes that map platform-specific registers used for general
+system control is required:
+
+    - compatible: "brcm,bcm<chip_id>-sun-top-ctrl", "syscon"
+    - compatible: "brcm,bcm<chip_id>-cpu-biu-ctrl",
+		  "brcm,brcmstb-cpu-biu-ctrl",
+		  "syscon"
+    - compatible: "brcm,bcm<chip_id>-hif-continuation", "syscon"
+
+cpu-biu-ctrl node
+-------------------
+SoCs with Broadcom Brahma15 ARM-based and Brahma53 ARM64-based CPUs have a
+specific Bus Interface Unit (BIU) block which controls and interfaces the CPU
+complex to the different Memory Controller Ports (MCP), one per memory
+controller (MEMC). This BIU block offers a feature called Write Pairing which
+consists in collapsing two adjacent cache lines into a single (bursted) write
+transaction towards the memory controller (MEMC) to maximize write bandwidth.
+
+Required properties:
+
+    - compatible: must be "brcm,bcm7445-cpu-biu-ctrl", "brcm,brcmstb-cpu-biu-ctrl", "syscon"
+
+Optional properties:
+
+    - brcm,write-pairing:
+	Boolean property, which when present indicates that the chip
+	supports write-pairing.
+
+example:
+    rdb {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "simple-bus";
+        ranges = <0 0x00 0xf0000000 0x1000000>;
+
+        sun_top_ctrl: syscon@404000 {
+            compatible = "brcm,bcm7445-sun-top-ctrl", "syscon";
+            reg = <0x404000 0x51c>;
+        };
+
+        hif_cpubiuctrl: syscon@3e2400 {
+            compatible = "brcm,bcm7445-cpu-biu-ctrl", "brcm,brcmstb-cpu-biu-ctrl", "syscon";
+            reg = <0x3e2400 0x5b4>;
+            brcm,write-pairing;
+        };
+
+        hif_continuation: syscon@452000 {
+            compatible = "brcm,bcm7445-hif-continuation", "syscon";
+            reg = <0x452000 0x100>;
+        };
+    };
+
+Nodes that allow for support of SMP initialization and reboot are required:
+
+smpboot
+-------
+Required properties:
+
+    - compatible
+        The string "brcm,brcmstb-smpboot".
+
+    - syscon-cpu
+        A phandle / integer array property which lets the BSP know the location
+        of certain CPU power-on registers.
+
+        The layout of the property is as follows:
+            o a phandle to the "hif_cpubiuctrl" syscon node
+            o offset to the base CPU power zone register
+            o offset to the base CPU reset register
+
+    - syscon-cont
+        A phandle pointing to the syscon node which describes the CPU boot
+        continuation registers.
+            o a phandle to the "hif_continuation" syscon node
+
+example:
+    smpboot {
+        compatible = "brcm,brcmstb-smpboot";
+        syscon-cpu = <&hif_cpubiuctrl 0x88 0x178>;
+        syscon-cont = <&hif_continuation>;
+    };
+
+reboot
+-------
+Required properties
+
+    - compatible
+        The string property "brcm,brcmstb-reboot" for 40nm/28nm chips with
+        the new SYS_CTRL interface, or "brcm,bcm7038-reboot" for 65nm
+        chips with the old SUN_TOP_CTRL interface.
+
+    - syscon
+        A phandle / integer array that points to the syscon node which describes
+        the general system reset registers.
+            o a phandle to "sun_top_ctrl"
+            o offset to the "reset source enable" register
+            o offset to the "software master reset" register
+
+example:
+    reboot {
+        compatible = "brcm,brcmstb-reboot";
+        syscon = <&sun_top_ctrl 0x304 0x308>;
+    };
+
+
+
+Power management
+----------------
+
+For power management (particularly, S2/S3/S5 system suspend), the following SoC
+components are needed:
+
+= Always-On control block (AON CTRL)
+
+This hardware provides control registers for the "always-on" (even in low-power
+modes) hardware, such as the Power Management State Machine (PMSM).
+
+Required properties:
+- compatible     : should contain "brcm,brcmstb-aon-ctrl"
+- reg            : the register start and length for the AON CTRL block
+
+Example:
+
+aon-ctrl@410000 {
+	compatible = "brcm,brcmstb-aon-ctrl";
+	reg = <0x410000 0x400>;
+};
+
+= Memory controllers
+
+A Broadcom STB SoC typically has a number of independent memory controllers,
+each of which may have several associated hardware blocks, which are versioned
+independently (control registers, DDR PHYs, etc.). One might consider
+describing these controllers as a parent "memory controllers" block, which
+contains N sub-nodes (one for each controller in the system), each of which is
+associated with a number of hardware register resources (e.g., its PHY). See
+the example device tree snippet below.
+
+== MEMC (MEMory Controller)
+
+Represents a single memory controller instance.
+
+Required properties:
+- compatible     : should contain "brcm,brcmstb-memc" and "simple-bus"
+
+Should contain subnodes for any of the following relevant hardware resources:
+
+== DDR PHY control
+
+Control registers for this memory controller's DDR PHY.
+
+Required properties:
+- compatible     : should contain one of these
+	"brcm,brcmstb-ddr-phy-v71.1"
+	"brcm,brcmstb-ddr-phy-v72.0"
+	"brcm,brcmstb-ddr-phy-v225.1"
+	"brcm,brcmstb-ddr-phy-v240.1"
+	"brcm,brcmstb-ddr-phy-v240.2"
+
+- reg            : the DDR PHY register range
+
+== DDR SHIMPHY
+
+Control registers for this memory controller's DDR SHIMPHY.
+
+Required properties:
+- compatible     : should contain "brcm,brcmstb-ddr-shimphy-v1.0"
+- reg            : the DDR SHIMPHY register range
+
+== MEMC DDR control
+
+Sequencer DRAM parameters and control registers. Used for Self-Refresh
+Power-Down (SRPD), among other things.
+
+Required properties:
+- compatible     : should contain one of these
+	"brcm,brcmstb-memc-ddr-rev-b.2.1"
+	"brcm,brcmstb-memc-ddr-rev-b.2.2"
+	"brcm,brcmstb-memc-ddr-rev-b.2.3"
+	"brcm,brcmstb-memc-ddr-rev-b.3.0"
+	"brcm,brcmstb-memc-ddr-rev-b.3.1"
+	"brcm,brcmstb-memc-ddr"
+- reg            : the MEMC DDR register range
+
+Example:
+
+memory_controllers {
+	ranges;
+	compatible = "simple-bus";
+
+	memc@0 {
+		compatible = "brcm,brcmstb-memc", "simple-bus";
+		ranges;
+
+		ddr-phy@f1106000 {
+			compatible = "brcm,brcmstb-ddr-phy-v240.1";
+			reg = <0xf1106000 0x21c>;
+		};
+
+		shimphy@f1108000 {
+			compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+			reg = <0xf1108000 0xe4>;
+		};
+
+		memc-ddr@f1102000 {
+			reg = <0xf1102000 0x800>;
+			compatible = "brcm,brcmstb-memc-ddr";
+		};
+	};
+
+	memc@1 {
+		compatible = "brcm,brcmstb-memc", "simple-bus";
+		ranges;
+
+		ddr-phy@f1186000 {
+			compatible = "brcm,brcmstb-ddr-phy-v240.1";
+			reg = <0xf1186000 0x21c>;
+		};
+
+		shimphy@f1188000 {
+			compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+			reg = <0xf1188000 0xe4>;
+		};
+
+		memc-ddr@f1182000 {
+			reg = <0xf1182000 0x800>;
+			compatible = "brcm,brcmstb-memc-ddr";
+		};
+	};
+
+	memc@2 {
+		compatible = "brcm,brcmstb-memc", "simple-bus";
+		ranges;
+
+		ddr-phy@f1206000 {
+			compatible = "brcm,brcmstb-ddr-phy-v240.1";
+			reg = <0xf1206000 0x21c>;
+		};
+
+		shimphy@f1208000 {
+			compatible = "brcm,brcmstb-ddr-shimphy-v1.0";
+			reg = <0xf1208000 0xe4>;
+		};
+
+		memc-ddr@f1202000 {
+			reg = <0xf1202000 0x800>;
+			compatible = "brcm,brcmstb-memc-ddr";
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml
new file mode 100644
index 000000000..432ccf990
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,cygnus.yaml
@@ -0,0 +1,31 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,cygnus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Cygnus device tree bindings
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm11300
+          - brcm,bcm11320
+          - brcm,bcm11350
+          - brcm,bcm11360
+          - brcm,bcm58300
+          - brcm,bcm58302
+          - brcm,bcm58303
+          - brcm,bcm58305
+      - const: brcm,cygnus
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml
new file mode 100644
index 000000000..294948399
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,hr2.yaml
@@ -0,0 +1,30 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,hr2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Hurricane 2 device tree bindings
+
+description:
+  Broadcom Hurricane 2 family of SoCs are used for switching control. These SoCs
+  are based on Broadcom's iProc SoC architecture and feature a single core Cortex
+  A9 ARM CPUs, DDR2/DDR3 memory, PCIe GEN-2, USB 2.0 and USB 3.0, serial and NAND
+  flash and a PCIe attached integrated switching engine.
+
+maintainers:
+  - Florian Fainelli <f.fainelli@gmail.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - ubnt,unifi-switch8
+      - const: brcm,bcm53342
+      - const: brcm,hr2
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml
new file mode 100644
index 000000000..c4847abbe
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,ns2.yaml
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,ns2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom North Star 2 (NS2) device tree bindings
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - brcm,ns2-svk
+          - brcm,ns2-xmc
+      - const: brcm,ns2
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
new file mode 100644
index 000000000..476bc23a7
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,nsp.yaml
@@ -0,0 +1,38 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,nsp.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Northstar Plus device tree bindings
+
+description:
+  Broadcom Northstar Plus family of SoCs are used for switching control
+  and management applications as well as residential router/gateway
+  applications. The SoC features dual core Cortex A9 ARM CPUs, integrating
+  several peripheral interfaces including multiple Gigabit Ethernet PHYs,
+  DDR3 memory, PCIE Gen-2, USB 2.0 and USB 3.0, serial and NAND flash,
+  SATA and several other IO controllers.
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm58522
+          - brcm,bcm58525
+          - brcm,bcm58535
+          - brcm,bcm58622
+          - brcm,bcm58623
+          - brcm,bcm58625
+          - brcm,bcm88312
+      - const: brcm,nsp
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml
new file mode 100644
index 000000000..c638e04eb
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,stingray.yaml
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,stingray.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Stingray device tree bindings
+
+maintainers:
+  - Ray Jui <rjui@broadcom.com>
+  - Scott Branden <sbranden@broadcom.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - brcm,bcm958742k
+          - brcm,bcm958742t
+          - brcm,bcm958802a802x
+      - const: brcm,stingray
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
new file mode 100644
index 000000000..4eba182ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/brcm,vulcan-soc.yaml
@@ -0,0 +1,24 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/brcm,vulcan-soc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Broadcom Vulcan device tree bindings
+
+maintainers:
+  - Robert Richter <rrichter@marvell.com>
+
+properties:
+  $nodename:
+    const: '/'
+  compatible:
+    items:
+      - enum:
+          - brcm,vulcan-eval
+          - cavium,thunderx2-cn9900
+      - const: brcm,vulcan-soc
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
new file mode 100644
index 000000000..a2c63c8b1
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/bcm/raspberrypi,bcm2835-firmware.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/bcm/raspberrypi,bcm2835-firmware.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Raspberry Pi VideoCore firmware driver
+
+maintainers:
+  - Eric Anholt <eric@anholt.net>
+  - Stefan Wahren <wahrenst@gmx.net>
+
+select:
+  properties:
+    compatible:
+      contains:
+        const: raspberrypi,bcm2835-firmware
+
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: raspberrypi,bcm2835-firmware
+      - const: simple-mfd
+
+  mboxes:
+    $ref: '/schemas/types.yaml#/definitions/phandle'
+    description: |
+      Phandle to the firmware device's Mailbox.
+      (See: ../mailbox/mailbox.txt for more information)
+
+  clocks:
+    type: object
+
+    properties:
+      compatible:
+        const: raspberrypi,firmware-clocks
+
+      "#clock-cells":
+        const: 1
+        description: >
+          The argument is the ID of the clocks contained by the
+          firmware messages.
+
+    required:
+      - compatible
+      - "#clock-cells"
+
+  reset:
+    type: object
+
+    properties:
+      compatible:
+        const: raspberrypi,firmware-reset
+
+      "#reset-cells":
+        const: 1
+        description: >
+          The argument is the ID of the firmware reset line to affect.
+
+    required:
+      - compatible
+      - "#reset-cells"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - mboxes
+
+additionalProperties: false
+
+examples:
+  - |
+    firmware {
+        compatible = "raspberrypi,bcm2835-firmware", "simple-mfd";
+        mboxes = <&mailbox>;
+
+        firmware_clocks: clocks {
+            compatible = "raspberrypi,firmware-clocks";
+            #clock-cells = <1>;
+        };
+
+        reset: reset {
+            compatible = "raspberrypi,firmware-reset";
+            #reset-cells = <1>;
+        };
+    };
+...