Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 242 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.yaml b/Documentation/devicetree/bindings/arm/l2c2x0.yaml
new file mode 100644
index 000000000..6b8f4d4fa
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/l2c2x0.yaml
@@ -0,0 +1,242 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/arm/l2c2x0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ARM L2 Cache Controller
+
+maintainers:
+  - Rob Herring <robh@kernel.org>
+
+description: |+
+  ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/
+  PL220/PL310 and variants) based level 2 cache controller. All these various
+  implementations of the L2 cache controller have compatible programming
+  models (Note 1). Some of the properties that are just prefixed "cache-*" are
+  taken from section 3.7.3 of the Devicetree Specification which can be found
+  at:
+  https://www.devicetree.org/specifications/
+
+  Note 1: The description in this document doesn't apply to integrated L2
+    cache controllers as found in e.g. Cortex-A15/A7/A57/A53. These
+    integrated L2 controllers are assumed to be all preconfigured by
+    early secure boot code. Thus no need to deal with their configuration
+    in the kernel at all.
+
+allOf:
+  - $ref: /schemas/cache-controller.yaml#
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - arm,pl310-cache
+          - arm,l220-cache
+          - arm,l210-cache
+            # DEPRECATED by "brcm,bcm11351-a2-pl310-cache"
+          - bcm,bcm11351-a2-pl310-cache
+            # For Broadcom bcm11351 chipset where an
+            # offset needs to be added to the address before passing down to the L2
+            # cache controller
+          - brcm,bcm11351-a2-pl310-cache
+            # Marvell Controller designed to be
+            # compatible with the ARM one, with system cache mode (meaning
+            # maintenance operations on L1 are broadcasted to the L2 and L2
+            # performs the same operation).
+          - marvell,aurora-system-cache
+            # Marvell Controller designed to be
+            # compatible with the ARM one with outer cache mode.
+          - marvell,aurora-outer-cache
+      - items:
+           # Marvell Tauros3 cache controller, compatible
+           # with arm,pl310-cache controller.
+          - const: marvell,tauros3-cache
+          - const: arm,pl310-cache
+
+  cache-level:
+    const: 2
+
+  cache-unified: true
+  cache-size: true
+  cache-sets: true
+  cache-block-size: true
+  cache-line-size: true
+
+  reg:
+    maxItems: 1
+
+  arm,data-latency:
+    description: Cycles of latency for Data RAM accesses. Specifies 3 cells of
+      read, write and setup latencies. Minimum valid values are 1. Controllers
+      without setup latency control should use a value of 0.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 3
+    items:
+      minimum: 0
+      maximum: 8
+
+  arm,tag-latency:
+    description: Cycles of latency for Tag RAM accesses. Specifies 3 cells of
+      read, write and setup latencies. Controllers without setup latency control
+      should use 0. Controllers without separate read and write Tag RAM latency
+      values should only use the first cell.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 3
+    items:
+      minimum: 0
+      maximum: 8
+
+  arm,dirty-latency:
+    description: Cycles of latency for Dirty RAMs. This is a single cell.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 8
+
+  arm,filter-ranges:
+    description: <start length> Starting address and length of window to
+      filter. Addresses in the filter window are directed to the M1 port. Other
+      addresses will go to the M0 port.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      minItems: 2
+      maxItems: 2
+
+  arm,io-coherent:
+    description: indicates that the system is operating in an hardware
+      I/O coherent mode. Valid only when the arm,pl310-cache compatible
+      string is used.
+    type: boolean
+
+  interrupts:
+    # Either a single combined interrupt or up to 9 individual interrupts
+    minItems: 1
+    maxItems: 9
+
+  cache-id-part:
+    description: cache id part number to be used if it is not present
+      on hardware
+    $ref: /schemas/types.yaml#/definitions/uint32
+
+  wt-override:
+    description: If present then L2 is forced to Write through mode
+    type: boolean
+
+  arm,double-linefill:
+    description: Override double linefill enable setting. Enable if
+      non-zero, disable if zero.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  arm,double-linefill-incr:
+    description: Override double linefill on INCR read. Enable
+      if non-zero, disable if zero.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  arm,double-linefill-wrap:
+    description: Override double linefill on WRAP read. Enable
+      if non-zero, disable if zero.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  arm,prefetch-drop:
+    description: Override prefetch drop enable setting. Enable if non-zero,
+      disable if zero.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  arm,prefetch-offset:
+    description: Override prefetch offset value.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1, 2, 3, 4, 5, 6, 7, 15, 23, 31]
+
+  arm,shared-override:
+    description: The default behavior of the L220 or PL310 cache
+      controllers with respect to the shareable attribute is to transform "normal
+      memory non-cacheable transactions" into "cacheable no allocate" (for reads)
+      or "write through no write allocate" (for writes).
+      On systems where this may cause DMA buffer corruption, this property must
+      be specified to indicate that such transforms are precluded.
+    type: boolean
+
+  arm,parity-enable:
+    description: enable parity checking on the L2 cache (L220 or PL310).
+    type: boolean
+
+  arm,parity-disable:
+    description: disable parity checking on the L2 cache (L220 or PL310).
+    type: boolean
+
+  marvell,ecc-enable:
+    description: enable ECC protection on the L2 cache
+    type: boolean
+
+  arm,outer-sync-disable:
+    description: disable the outer sync operation on the L2 cache.
+      Some core tiles, especially ARM PB11MPCore have a faulty L220 cache that
+      will randomly hang unless outer sync operations are disabled.
+    type: boolean
+
+  prefetch-data:
+    description: |
+      Data prefetch. Value: <0> (forcibly disable), <1>
+      (forcibly enable), property absent (retain settings set by firmware)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  prefetch-instr:
+    description: |
+      Instruction prefetch. Value: <0> (forcibly disable),
+      <1> (forcibly enable), property absent (retain settings set by
+      firmware)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  arm,dynamic-clock-gating:
+    description: |
+      L2 dynamic clock gating. Value: <0> (forcibly
+      disable), <1> (forcibly enable), property absent (OS specific behavior,
+      preferably retain firmware settings)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  arm,standby-mode:
+    description: L2 standby mode enable. Value <0> (forcibly disable),
+      <1> (forcibly enable), property absent (OS specific behavior,
+      preferably retain firmware settings)
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  arm,early-bresp-disable:
+    description: Disable the CA9 optimization Early BRESP (PL310)
+    type: boolean
+
+  arm,full-line-zero-disable:
+    description: Disable the CA9 optimization Full line of zero
+      write (PL310)
+    type: boolean
+
+required:
+  - compatible
+  - cache-unified
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    cache-controller@fff12000 {
+        compatible = "arm,pl310-cache";
+        reg = <0xfff12000 0x1000>;
+        arm,data-latency = <1 1 1>;
+        arm,tag-latency = <2 2 2>;
+        arm,filter-ranges = <0x80000000 0x8000000>;
+        cache-unified;
+        cache-level = <2>;
+        interrupts = <45>;
+    };
+
+...