Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 52 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/ata/sata-common.yaml b/Documentation/devicetree/bindings/ata/sata-common.yaml
new file mode 100644
index 000000000..7ac77b1c5
--- /dev/null
+++ b/Documentation/devicetree/bindings/ata/sata-common.yaml
@@ -0,0 +1,52 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/ata/sata-common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common Properties for Serial AT attachment (SATA) controllers
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+  This document defines device tree properties common to most Serial
+  AT attachment (SATA) storage devices. It doesn't constitute a device tree
+  binding specification by itself but is meant to be referenced by device
+  tree bindings.
+
+  The SATA controller-specific device tree bindings are responsible for
+  defining whether each property is required or optional.
+
+properties:
+  $nodename:
+    pattern: "^sata(@.*)?$"
+    description:
+      Specifies the host controller node. SATA host controller nodes are named
+      "sata"
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^sata-port@[0-9a-e]$":
+    description: |
+      DT nodes for ports connected on the SATA host. The SATA port
+      nodes will be named "sata-port".
+    type: object
+
+    properties:
+      reg:
+        minimum: 0
+        maximum: 14
+        description:
+          The ID number of the drive port SATA can potentially use a port
+          multiplier making it possible to connect up to 15 disks to a single
+          SATA port.
+
+additionalProperties: true
+
+...