summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/bus
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-27 10:05:51 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-27 10:05:51 +0000
commit5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch)
treea94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/devicetree/bindings/bus
parentInitial commit. (diff)
downloadlinux-upstream/5.10.209.tar.xz
linux-upstream/5.10.209.zip
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r--Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml84
-rw-r--r--Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml79
-rw-r--r--Documentation/devicetree/bindings/bus/arm,integrator-ap-lm.yaml83
-rw-r--r--Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml90
-rw-r--r--Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml107
-rw-r--r--Documentation/devicetree/bindings/bus/brcm,bus-axi.txt53
-rw-r--r--Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt34
-rw-r--r--Documentation/devicetree/bindings/bus/imx-weim.txt112
-rw-r--r--Documentation/devicetree/bindings/bus/moxtet.txt46
-rw-r--r--Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml37
-rw-r--r--Documentation/devicetree/bindings/bus/mvebu-mbus.txt276
-rw-r--r--Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt128
-rw-r--r--Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt44
-rw-r--r--Documentation/devicetree/bindings/bus/omap-ocp2scp.txt29
-rw-r--r--Documentation/devicetree/bindings/bus/qcom,ebi2.txt138
-rw-r--r--Documentation/devicetree/bindings/bus/renesas,bsc.yaml62
-rw-r--r--Documentation/devicetree/bindings/bus/simple-pm-bus.yaml77
-rw-r--r--Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml103
-rw-r--r--Documentation/devicetree/bindings/bus/ti,da850-mstpri.txt20
-rw-r--r--Documentation/devicetree/bindings/bus/ti-sysc.txt139
-rw-r--r--Documentation/devicetree/bindings/bus/ts-nbus.txt50
21 files changed, 1791 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
new file mode 100644
index 000000000..0503651cd
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/allwinner,sun50i-a64-de2.yaml
@@ -0,0 +1,84 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/allwinner,sun50i-a64-de2.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A64 Display Engine Bus Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ $nodename:
+ pattern: "^bus(@[0-9a-f]+)?$"
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ compatible:
+ oneOf:
+ - const: allwinner,sun50i-a64-de2
+ - items:
+ - const: allwinner,sun50i-h6-de3
+ - const: allwinner,sun50i-a64-de2
+
+ reg:
+ maxItems: 1
+
+ allwinner,sram:
+ description:
+ The SRAM that needs to be claimed to access the display engine
+ bus.
+ $ref: /schemas/types.yaml#definitions/phandle-array
+ maxItems: 1
+
+ ranges: true
+
+patternProperties:
+ # All other properties should be child nodes with unit-address and 'reg'
+ "^[a-zA-Z][a-zA-Z0-9,+\\-._]{0,63}@[0-9a-fA-F]+$":
+ type: object
+ properties:
+ reg:
+ maxItems: 1
+
+ required:
+ - reg
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+ - allwinner,sram
+
+additionalProperties: false
+
+examples:
+ - |
+ bus@1000000 {
+ compatible = "allwinner,sun50i-a64-de2";
+ reg = <0x1000000 0x400000>;
+ allwinner,sram = <&de2_sram 1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x1000000 0x400000>;
+
+ display_clocks: clock@0 {
+ compatible = "allwinner,sun50i-a64-de2-clk";
+ reg = <0x0 0x100000>;
+ clocks = <&ccu 52>, <&ccu 99>;
+ clock-names = "bus", "mod";
+ resets = <&ccu 30>;
+ #clock-cells = <1>;
+ #reset-cells = <1>;
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
new file mode 100644
index 000000000..32d33b983
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/allwinner,sun8i-a23-rsb.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/allwinner,sun8i-a23-rsb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Allwinner A23 RSB Device Tree Bindings
+
+maintainers:
+ - Chen-Yu Tsai <wens@csie.org>
+ - Maxime Ripard <mripard@kernel.org>
+
+properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ compatible:
+ oneOf:
+ - const: allwinner,sun8i-a23-rsb
+ - items:
+ - const: allwinner,sun8i-a83t-rsb
+ - const: allwinner,sun8i-a23-rsb
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ resets:
+ maxItems: 1
+
+ clock-frequency:
+ minimum: 1
+ maximum: 20000000
+
+patternProperties:
+ "^.*@[0-9a-fA-F]+$":
+ type: object
+ properties:
+ reg:
+ maxItems: 1
+
+ required:
+ - reg
+
+required:
+ - compatible
+ - reg
+ - interrupts
+ - clocks
+ - resets
+
+examples:
+ - |
+ rsb@1f03400 {
+ compatible = "allwinner,sun8i-a23-rsb";
+ reg = <0x01f03400 0x400>;
+ interrupts = <0 39 4>;
+ clocks = <&apb0_gates 3>;
+ clock-frequency = <3000000>;
+ resets = <&apb0_rst 3>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pmic@3e3 {
+ reg = <0x3e3>;
+
+ /* ... */
+ };
+ };
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/bus/arm,integrator-ap-lm.yaml b/Documentation/devicetree/bindings/bus/arm,integrator-ap-lm.yaml
new file mode 100644
index 000000000..47227427c
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/arm,integrator-ap-lm.yaml
@@ -0,0 +1,83 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/arm,integrator-ap-lm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Integrator/AP Logic Module extension bus
+
+maintainers:
+ - Linus Walleij <linusw@kernel.org>
+
+description: The Integrator/AP is a prototyping platform and as such has a
+ site for stacking up to four logic modules (LM) designed specifically for
+ use with this platform. A special system controller register can be read to
+ determine if a logic module is connected at index 0, 1, 2 or 3. The logic
+ module connector is described in this binding. The logic modules per se
+ then have their own specific per-module bindings and they will be described
+ as subnodes under this logic module extension bus.
+
+properties:
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 1
+
+ compatible:
+ items:
+ - const: arm,integrator-ap-lm
+
+ ranges: true
+ dma-ranges: true
+
+patternProperties:
+ "^bus(@[0-9a-f]*)?$":
+ description: Nodes on the Logic Module bus represent logic modules
+ and are named with bus. The first module is at 0xc0000000, the second
+ at 0xd0000000 and so on until the top of the memory of the system at
+ 0xffffffff. All information about the memory used by the module is
+ in ranges and dma-ranges.
+ type: object
+
+ required:
+ - compatible
+
+required:
+ - compatible
+
+examples:
+ - |
+ bus@c0000000 {
+ compatible = "arm,integrator-ap-lm";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0xc0000000 0xc0000000 0x40000000>;
+ dma-ranges;
+
+ bus@c0000000 {
+ compatible = "simple-bus";
+ ranges = <0x00000000 0xc0000000 0x10000000>;
+ /* The Logic Modules sees the Core Module 0 RAM @80000000 */
+ dma-ranges = <0x00000000 0x80000000 0x10000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ serial@100000 {
+ compatible = "arm,pl011", "arm,primecell";
+ reg = <0x00100000 0x1000>;
+ interrupts-extended = <&impd1_vic 1>;
+ };
+
+ impd1_vic: interrupt-controller@3000000 {
+ compatible = "arm,pl192-vic";
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ reg = <0x03000000 0x1000>;
+ valid-mask = <0x00000bff>;
+ interrupts-extended = <&pic 9>;
+ };
+ };
+ };
+
+additionalProperties: false
diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml
new file mode 100644
index 000000000..37ba3337f
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/baikal,bt1-apb.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/baikal,bt1-apb.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 APB-bus
+
+maintainers:
+ - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+ Baikal-T1 CPU or DMAC MMIO requests are handled by the AMBA 3 AXI Interconnect
+ which routes them to the AXI-APB bridge. This interface is a single master
+ multiple slaves bus in turn serializing IO accesses and routing them to the
+ addressed APB slave devices. In case of any APB protocol collisions, slave
+ device not responding on timeout an IRQ is raised with an erroneous address
+ reported to the APB terminator (APB Errors Handler Block).
+
+allOf:
+ - $ref: /schemas/simple-bus.yaml#
+
+properties:
+ compatible:
+ contains:
+ const: baikal,bt1-apb
+
+ reg:
+ items:
+ - description: APB EHB MMIO registers
+ - description: APB MMIO region with no any device mapped
+
+ reg-names:
+ items:
+ - const: ehb
+ - const: nodev
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: APB reference clock
+
+ clock-names:
+ items:
+ - const: pclk
+
+ resets:
+ items:
+ - description: APB domain reset line
+
+ reset-names:
+ items:
+ - const: prst
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - interrupts
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/mips-gic.h>
+
+ bus@1f059000 {
+ compatible = "baikal,bt1-apb", "simple-bus";
+ reg = <0x1f059000 0x1000>,
+ <0x1d000000 0x2040000>;
+ reg-names = "ehb", "nodev";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ ranges;
+
+ interrupts = <GIC_SHARED 16 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&ccu_sys 1>;
+ clock-names = "pclk";
+
+ resets = <&ccu_sys 1>;
+ reset-names = "prst";
+ };
+...
diff --git a/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml
new file mode 100644
index 000000000..0bee46945
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/baikal,bt1-axi.yaml
@@ -0,0 +1,107 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2020 BAIKAL ELECTRONICS, JSC
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/baikal,bt1-axi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Baikal-T1 AXI-bus
+
+maintainers:
+ - Serge Semin <fancer.lancer@gmail.com>
+
+description: |
+ AXI3-bus is the main communication bus of Baikal-T1 SoC connecting all
+ high-speed peripheral IP-cores with RAM controller and with MIPS P5600
+ cores. Traffic arbitration is done by means of DW AXI Interconnect (so
+ called AXI Main Interconnect) routing IO requests from one block to
+ another: from CPU to SoC peripherals and between some SoC peripherals
+ (mostly between peripheral devices and RAM, but also between DMA and
+ some peripherals). In case of any protocol error, device not responding
+ an IRQ is raised and a faulty situation is reported to the AXI EHB
+ (Errors Handler Block) embedded on top of the DW AXI Interconnect and
+ accessible by means of the Baikal-T1 System Controller.
+
+allOf:
+ - $ref: /schemas/simple-bus.yaml#
+
+properties:
+ compatible:
+ contains:
+ const: baikal,bt1-axi
+
+ reg:
+ minItems: 1
+ items:
+ - description: Synopsys DesignWare AXI Interconnect QoS registers
+ - description: AXI EHB MMIO system controller registers
+
+ reg-names:
+ minItems: 1
+ items:
+ - const: qos
+ - const: ehb
+
+ '#interconnect-cells':
+ const: 1
+
+ syscon:
+ $ref: /schemas/types.yaml#definitions/phandle
+ description: Phandle to the Baikal-T1 System Controller DT node
+
+ interrupts:
+ maxItems: 1
+
+ clocks:
+ items:
+ - description: Main Interconnect uplink reference clock
+
+ clock-names:
+ items:
+ - const: aclk
+
+ resets:
+ items:
+ - description: Main Interconnect reset line
+
+ reset-names:
+ items:
+ - const: arst
+
+unevaluatedProperties: false
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - syscon
+ - interrupts
+ - clocks
+ - clock-names
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/mips-gic.h>
+
+ bus@1f05a000 {
+ compatible = "baikal,bt1-axi", "simple-bus";
+ reg = <0x1f05a000 0x1000>,
+ <0x1f04d110 0x8>;
+ reg-names = "qos", "ehb";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interconnect-cells = <1>;
+
+ syscon = <&syscon>;
+
+ ranges;
+
+ interrupts = <GIC_SHARED 127 IRQ_TYPE_LEVEL_HIGH>;
+
+ clocks = <&ccu_axi 0>;
+ clock-names = "aclk";
+
+ resets = <&ccu_axi 0>;
+ reset-names = "arst";
+ };
+...
diff --git a/Documentation/devicetree/bindings/bus/brcm,bus-axi.txt b/Documentation/devicetree/bindings/bus/brcm,bus-axi.txt
new file mode 100644
index 000000000..edd44d802
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/brcm,bus-axi.txt
@@ -0,0 +1,53 @@
+Driver for ARM AXI Bus with Broadcom Plugins (bcma)
+
+Required properties:
+
+- compatible : brcm,bus-axi
+
+- reg : iomem address range of chipcommon core
+
+The cores on the AXI bus are automatically detected by bcma with the
+memory ranges they are using and they get registered afterwards.
+Automatic detection of the IRQ number is not working on
+BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide
+them manually through device tree. Use an interrupt-map to specify the
+IRQ used by the devices on the bus. The first address is just an index,
+because we do not have any special register.
+
+The top-level axi bus may contain children representing attached cores
+(devices). This is needed since some hardware details can't be auto
+detected (e.g. IRQ numbers). Also some of the cores may be responsible
+for extra things, e.g. ChipCommon providing access to the GPIO chip.
+
+Example:
+
+ axi@18000000 {
+ compatible = "brcm,bus-axi";
+ reg = <0x18000000 0x1000>;
+ ranges = <0x00000000 0x18000000 0x00100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ #interrupt-cells = <1>;
+ interrupt-map-mask = <0x000fffff 0xffff>;
+ interrupt-map =
+ /* Ethernet Controller 0 */
+ <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
+
+ /* Ethernet Controller 1 */
+ <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
+
+ /* PCIe Controller 0 */
+ <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
+ <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+
+ chipcommon {
+ reg = <0x00000000 0x1000>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
new file mode 100644
index 000000000..10f6d0a81
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/brcm,gisb-arb.txt
@@ -0,0 +1,34 @@
+Broadcom GISB bus Arbiter controller
+
+Required properties:
+
+- compatible:
+ "brcm,bcm7278-gisb-arb" for V7 28nm chips
+ "brcm,gisb-arb" or "brcm,bcm7445-gisb-arb" for other 28nm chips
+ "brcm,bcm7435-gisb-arb" for newer 40nm chips
+ "brcm,bcm7400-gisb-arb" for older 40nm chips and all 65nm chips
+ "brcm,bcm7038-gisb-arb" for 130nm chips
+- reg: specifies the base physical address and size of the registers
+- interrupts: specifies the two interrupts (timeout and TEA) to be used from
+ the parent interrupt controller. A third optional interrupt may be specified
+ for breakpoints.
+
+Optional properties:
+
+- brcm,gisb-arb-master-mask: 32-bits wide bitmask used to specify which GISB
+ masters are valid at the system level
+- brcm,gisb-arb-master-names: string list of the litteral name of the GISB
+ masters. Should match the number of bits set in brcm,gisb-master-mask and
+ the order in which they appear
+
+Example:
+
+gisb-arb@f0400000 {
+ compatible = "brcm,gisb-arb";
+ reg = <0xf0400000 0x800>;
+ interrupts = <0>, <2>;
+ interrupt-parent = <&sun_l2_intc>;
+
+ brcm,gisb-arb-master-mask = <0x7>;
+ brcm,gisb-arb-master-names = "bsp_0", "scpu_0", "cpu_0";
+};
diff --git a/Documentation/devicetree/bindings/bus/imx-weim.txt b/Documentation/devicetree/bindings/bus/imx-weim.txt
new file mode 100644
index 000000000..1b1d1c5c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/imx-weim.txt
@@ -0,0 +1,112 @@
+Device tree bindings for i.MX Wireless External Interface Module (WEIM)
+
+The term "wireless" does not imply that the WEIM is literally an interface
+without wires. It simply means that this module was originally designed for
+wireless and mobile applications that use low-power technology.
+
+The actual devices are instantiated from the child nodes of a WEIM node.
+
+Required properties:
+
+ - compatible: Should contain one of the following:
+ "fsl,imx1-weim"
+ "fsl,imx27-weim"
+ "fsl,imx51-weim"
+ "fsl,imx50-weim"
+ "fsl,imx6q-weim"
+ - reg: A resource specifier for the register space
+ (see the example below)
+ - clocks: the clock, see the example below.
+ - #address-cells: Must be set to 2 to allow memory address translation
+ - #size-cells: Must be set to 1 to allow CS address passing
+ - ranges: Must be set up to reflect the memory layout with four
+ integer values for each chip-select line in use:
+
+ <cs-number> 0 <physical address of mapping> <size>
+
+Optional properties:
+
+ - fsl,weim-cs-gpr: For "fsl,imx50-weim" and "fsl,imx6q-weim" type of
+ devices, it should be the phandle to the system General
+ Purpose Register controller that contains WEIM CS GPR
+ register, e.g. IOMUXC_GPR1 on i.MX6Q. IOMUXC_GPR1[11:0]
+ should be set up as one of the following 4 possible
+ values depending on the CS space configuration.
+
+ IOMUXC_GPR1[11:0] CS0 CS1 CS2 CS3
+ ---------------------------------------------
+ 05 128M 0M 0M 0M
+ 033 64M 64M 0M 0M
+ 0113 64M 32M 32M 0M
+ 01111 32M 32M 32M 32M
+
+ In case that the property is absent, the reset value or
+ what bootloader sets up in IOMUXC_GPR1[11:0] will be
+ used.
+
+ - fsl,burst-clk-enable For "fsl,imx50-weim" and "fsl,imx6q-weim" type of
+ devices, the presence of this property indicates that
+ the weim bus should operate in Burst Clock Mode.
+
+Timing property for child nodes. It is mandatory, not optional.
+
+ - fsl,weim-cs-timing: The timing array, contains timing values for the
+ child node. We get the CS indexes from the address
+ ranges in the child node's "reg" property.
+ The number of registers depends on the selected chip:
+ For i.MX1, i.MX21 ("fsl,imx1-weim") there are two
+ registers: CSxU, CSxL.
+ For i.MX25, i.MX27, i.MX31 and i.MX35 ("fsl,imx27-weim")
+ there are three registers: CSCRxU, CSCRxL, CSCRxA.
+ For i.MX50, i.MX53 ("fsl,imx50-weim"),
+ i.MX51 ("fsl,imx51-weim") and i.MX6Q ("fsl,imx6q-weim")
+ there are six registers: CSxGCR1, CSxGCR2, CSxRCR1,
+ CSxRCR2, CSxWCR1, CSxWCR2.
+
+Example for an imx6q-sabreauto board, the NOR flash connected to the WEIM:
+
+ weim: weim@21b8000 {
+ compatible = "fsl,imx6q-weim";
+ reg = <0x021b8000 0x4000>;
+ clocks = <&clks 196>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x08000000 0x08000000>;
+ fsl,weim-cs-gpr = <&gpr>;
+
+ nor@0,0 {
+ compatible = "cfi-flash";
+ reg = <0 0 0x02000000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ bank-width = <2>;
+ fsl,weim-cs-timing = <0x00620081 0x00000001 0x1c022000
+ 0x0000c000 0x1404a38e 0x00000000>;
+ };
+ };
+
+Example for an imx6q-based board, a multi-chipselect device connected to WEIM:
+
+In this case, both chip select 0 and 1 will be configured with the same timing
+array values.
+
+ weim: weim@21b8000 {
+ compatible = "fsl,imx6q-weim";
+ reg = <0x021b8000 0x4000>;
+ clocks = <&clks 196>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0 0x08000000 0x02000000
+ 1 0 0x0a000000 0x02000000
+ 2 0 0x0c000000 0x02000000
+ 3 0 0x0e000000 0x02000000>;
+ fsl,weim-cs-gpr = <&gpr>;
+
+ acme@0 {
+ compatible = "acme,whatever";
+ reg = <0 0 0x100>, <0 0x400000 0x800>,
+ <1 0x400000 0x800>;
+ fsl,weim-cs-timing = <0x024400b1 0x00001010 0x20081100
+ 0x00000000 0xa0000240 0x00000000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/bus/moxtet.txt b/Documentation/devicetree/bindings/bus/moxtet.txt
new file mode 100644
index 000000000..fb50fc865
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/moxtet.txt
@@ -0,0 +1,46 @@
+Turris Mox module status and configuration bus (over SPI)
+
+Required properties:
+ - compatible : Should be "cznic,moxtet"
+ - #address-cells : Has to be 1
+ - #size-cells : Has to be 0
+ - spi-cpol : Required inverted clock polarity
+ - spi-cpha : Required shifted clock phase
+ - interrupts : Must contain reference to the shared interrupt line
+ - interrupt-controller : Required
+ - #interrupt-cells : Has to be 1
+
+For other required and optional properties of SPI slave nodes please refer to
+../spi/spi-bus.txt.
+
+Required properties of subnodes:
+ - reg : Should be position on the Moxtet bus (how many Moxtet
+ modules are between this module and CPU module, so
+ either 0 or a positive integer)
+
+The driver finds the devices connected to the bus by itself, but it may be
+needed to reference some of them from other parts of the device tree. In that
+case the devices can be defined as subnodes of the moxtet node.
+
+Example:
+
+ moxtet@1 {
+ compatible = "cznic,moxtet";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ spi-max-frequency = <10000000>;
+ spi-cpol;
+ spi-cpha;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&gpiosb>;
+ interrupts = <5 IRQ_TYPE_EDGE_FALLING>;
+
+ moxtet_sfp: gpio@0 {
+ compatible = "cznic,moxtet-gpio";
+ gpio-controller;
+ #gpio-cells = <2>;
+ reg = <0>;
+ }
+ };
diff --git a/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml b/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml
new file mode 100644
index 000000000..6a7b26b04
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/mti,mips-cdmm.yaml
@@ -0,0 +1,37 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/mti,mips-cdmm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: MIPS Common Device Memory Map
+
+description: |
+ Defines a location of the MIPS Common Device Memory Map registers.
+
+maintainers:
+ - James Hogan <jhogan@kernel.org>
+
+properties:
+ compatible:
+ const: mti,mips-cdmm
+
+ reg:
+ description: |
+ Base address and size of an unoccupied memory region, which will be
+ used to map the MIPS CDMM registers block.
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ cdmm@1bde8000 {
+ compatible = "mti,mips-cdmm";
+ reg = <0x1bde8000 0x8000>;
+ };
+...
diff --git a/Documentation/devicetree/bindings/bus/mvebu-mbus.txt b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt
new file mode 100644
index 000000000..f2ab7fd01
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/mvebu-mbus.txt
@@ -0,0 +1,276 @@
+
+* Marvell MBus
+
+Required properties:
+
+- compatible: Should be set to one of the following:
+ marvell,armada370-mbus
+ marvell,armadaxp-mbus
+ marvell,armada375-mbus
+ marvell,armada380-mbus
+ marvell,kirkwood-mbus
+ marvell,dove-mbus
+ marvell,orion5x-88f5281-mbus
+ marvell,orion5x-88f5182-mbus
+ marvell,orion5x-88f5181-mbus
+ marvell,orion5x-88f6183-mbus
+ marvell,mv78xx0-mbus
+
+- address-cells: Must be '2'. The first cell for the MBus ID encoding,
+ the second cell for the address offset within the window.
+
+- size-cells: Must be '1'.
+
+- ranges: Must be set up to provide a proper translation for each child.
+ See the examples below.
+
+- controller: Contains a single phandle referring to the MBus controller
+ node. This allows to specify the node that contains the
+ registers that control the MBus, which is typically contained
+ within the internal register window (see below).
+
+Optional properties:
+
+- pcie-mem-aperture: This optional property contains the aperture for
+ the memory region of the PCIe driver.
+ If it's defined, it must encode the base address and
+ size for the address decoding windows allocated for
+ the PCIe memory region.
+
+- pcie-io-aperture: Just as explained for the above property, this
+ optional property contains the aperture for the
+ I/O region of the PCIe driver.
+
+* Marvell MBus controller
+
+Required properties:
+
+- compatible: Should be set to "marvell,mbus-controller".
+
+- reg: Device's register space.
+ Two or three entries are expected (see the examples below):
+ the first one controls the devices decoding window,
+ the second one controls the SDRAM decoding window and
+ the third controls the MBus bridge (only with the
+ marvell,armada370-mbus and marvell,armadaxp-mbus
+ compatible strings)
+
+Example:
+
+ soc {
+ compatible = "marvell,armada370-mbus", "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ controller = <&mbusc>;
+ pcie-mem-aperture = <0xe0000000 0x8000000>;
+ pcie-io-aperture = <0xe8000000 0x100000>;
+
+ internal-regs {
+ compatible = "simple-bus";
+
+ mbusc: mbus-controller@20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
+ };
+
+ /* more children ...*/
+ };
+ };
+
+** MBus address decoding window specification
+
+The MBus children address space is comprised of two cells: the first one for
+the window ID and the second one for the offset within the window.
+In order to allow to describe valid and non-valid window entries, the
+following encoding is used:
+
+ 0xSIAA0000 0x00oooooo
+
+Where:
+
+ S = 0x0 for a MBus valid window
+ S = 0xf for a non-valid window (see below)
+
+If S = 0x0, then:
+
+ I = 4-bit window target ID
+ AA = windpw attribute
+
+If S = 0xf, then:
+
+ I = don't care
+ AA = 1 for internal register
+
+Following the above encoding, for each ranges entry for a MBus valid window
+(S = 0x0), an address decoding window is allocated. On the other side,
+entries for translation that do not correspond to valid windows (S = 0xf)
+are skipped.
+
+ soc {
+ compatible = "marvell,armada370-mbus", "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ controller = <&mbusc>;
+
+ ranges = <0xf0010000 0 0 0xd0000000 0x100000
+ 0x01e00000 0 0 0xfff00000 0x100000>;
+
+ bootrom {
+ compatible = "marvell,bootrom";
+ reg = <0x01e00000 0 0x100000>;
+ };
+
+ /* other children */
+ ...
+
+ internal-regs {
+ compatible = "simple-bus";
+ ranges = <0 0xf0010000 0 0x100000>;
+
+ mbusc: mbus-controller@20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
+ };
+
+ /* more children ...*/
+ };
+ };
+
+In the shown example, the translation entry in the 'ranges' property is what
+makes the MBus driver create a static decoding window for the corresponding
+given child device. Note that the binding does not require child nodes to be
+present. Of course, child nodes are needed to probe the devices.
+
+Since each window is identified by its target ID and attribute ID there's
+a special macro that can be use to simplify the translation entries:
+
+#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
+
+Using this macro, the above example would be:
+
+ soc {
+ compatible = "marvell,armada370-mbus", "simple-bus";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ controller = <&mbusc>;
+
+ ranges = < MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000
+ MBUS_ID(0x01, 0xe0) 0 0 0xfff00000 0x100000>;
+
+ bootrom {
+ compatible = "marvell,bootrom";
+ reg = <MBUS_ID(0x01, 0xe0) 0 0x100000>;
+ };
+
+ /* other children */
+ ...
+
+ internal-regs {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+ mbusc: mbus-controller@20000 {
+ compatible = "marvell,mbus-controller";
+ reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
+ };
+
+ /* other children */
+ ...
+ };
+ };
+
+
+** About the window base address
+
+Remember the MBus controller allows a great deal of flexibility for choosing
+the decoding window base address. When planning the device tree layout it's
+possible to choose any address as the base address, provided of course there's
+a region large enough available, and with the required alignment.
+
+Yet in other words: there's nothing preventing us from setting a base address
+of 0xf0000000, or 0xd0000000 for the NOR device shown above, if such region is
+unused.
+
+** Window allocation policy
+
+The mbus-node ranges property defines a set of mbus windows that are expected
+to be set by the operating system and that are guaranteed to be free of overlaps
+with one another or with the system memory ranges.
+
+Each entry in the property refers to exactly one window. If the operating system
+chooses to use a different set of mbus windows, it must ensure that any address
+translations performed from downstream devices are adapted accordingly.
+
+The operating system may insert additional mbus windows that do not conflict
+with the ones listed in the ranges, e.g. for mapping PCIe devices.
+As a special case, the internal register window must be set up by the boot
+loader at the address listed in the ranges property, since access to that region
+is needed to set up the other windows.
+
+** Example
+
+See the example below, where a more complete device tree is shown:
+
+ soc {
+ compatible = "marvell,armadaxp-mbus", "simple-bus";
+ controller = <&mbusc>;
+
+ ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 /* internal-regs */
+ MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000
+ MBUS_ID(0x01, 0x2f) 0 0 0xf0000000 0x8000000>;
+
+ bootrom {
+ compatible = "marvell,bootrom";
+ reg = <MBUS_ID(0x01, 0x1d) 0 0x100000>;
+ };
+
+ devbus-bootcs {
+ ranges = <0 MBUS_ID(0x01, 0x2f) 0 0x8000000>;
+
+ /* NOR */
+ nor {
+ compatible = "cfi-flash";
+ reg = <0 0x8000000>;
+ bank-width = <2>;
+ };
+ };
+
+ pcie-controller {
+ compatible = "marvell,armada-xp-pcie";
+ device_type = "pci";
+
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ ranges =
+ <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 /* Port 0.0 registers */
+ 0x82000000 0 0x42000 MBUS_ID(0xf0, 0x01) 0x42000 0 0x00002000 /* Port 2.0 registers */
+ 0x82000000 0 0x44000 MBUS_ID(0xf0, 0x01) 0x44000 0 0x00002000 /* Port 0.1 registers */
+ 0x82000000 0 0x48000 MBUS_ID(0xf0, 0x01) 0x48000 0 0x00002000 /* Port 0.2 registers */
+ 0x82000000 0 0x4c000 MBUS_ID(0xf0, 0x01) 0x4c000 0 0x00002000 /* Port 0.3 registers */
+ 0x82000800 0 0xe0000000 MBUS_ID(0x04, 0xe8) 0xe0000000 0 0x08000000 /* Port 0.0 MEM */
+ 0x81000800 0 0 MBUS_ID(0x04, 0xe0) 0xe8000000 0 0x00100000 /* Port 0.0 IO */>;
+
+
+ pcie@1,0 {
+ /* Port 0, Lane 0 */
+ };
+ };
+
+ internal-regs {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
+
+ mbusc: mbus-controller@20000 {
+ reg = <0x20000 0x100>, <0x20180 0x20>, <0x20250 0x8>;
+ };
+
+ interrupt-controller@20000 {
+ reg = <0x20a00 0x2d0>, <0x21070 0x58>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt b/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt
new file mode 100644
index 000000000..c1e706217
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/nvidia,tegra20-gmi.txt
@@ -0,0 +1,128 @@
+Device tree bindings for NVIDIA Tegra Generic Memory Interface bus
+
+The Generic Memory Interface bus enables memory transfers between internal and
+external memory. Can be used to attach various high speed devices such as
+synchronous/asynchronous NOR, FPGA, UARTS and more.
+
+The actual devices are instantiated from the child nodes of a GMI node.
+
+Required properties:
+ - compatible : Should contain one of the following:
+ For Tegra20 must contain "nvidia,tegra20-gmi".
+ For Tegra30 must contain "nvidia,tegra30-gmi".
+ - reg: Should contain GMI controller registers location and length.
+ - clocks: Must contain an entry for each entry in clock-names.
+ - clock-names: Must include the following entries: "gmi"
+ - resets : Must contain an entry for each entry in reset-names.
+ - reset-names : Must include the following entries: "gmi"
+ - #address-cells: The number of cells used to represent physical base
+ addresses in the GMI address space. Should be 2.
+ - #size-cells: The number of cells used to represent the size of an address
+ range in the GMI address space. Should be 1.
+ - ranges: Must be set up to reflect the memory layout with three integer values
+ for each chip-select line in use (only one entry is supported, see below
+ comments):
+ <cs-number> <offset> <physical address of mapping> <size>
+
+Note that the GMI controller does not have any internal chip-select address
+decoding, because of that chip-selects either need to be managed via software
+or by employing external chip-select decoding logic.
+
+If external chip-select logic is used to support multiple devices it is assumed
+that the devices use the same timing and so are probably the same type. It also
+assumes that they can fit in the 256MB address range. In this case only one
+child device is supported which represents the active chip-select line, see
+examples for more insight.
+
+The chip-select number is decoded from the child nodes second address cell of
+'ranges' property, if 'ranges' property is not present or empty chip-select will
+then be decoded from the first cell of the 'reg' property.
+
+Optional child cs node properties:
+
+ - nvidia,snor-data-width-32bit: Use 32bit data-bus, default is 16bit.
+ - nvidia,snor-mux-mode: Enable address/data MUX mode.
+ - nvidia,snor-rdy-active-before-data: Assert RDY signal one cycle before data.
+ If omitted it will be asserted with data.
+ - nvidia,snor-rdy-active-high: RDY signal is active high
+ - nvidia,snor-adv-active-high: ADV signal is active high
+ - nvidia,snor-oe-active-high: WE/OE signal is active high
+ - nvidia,snor-cs-active-high: CS signal is active high
+
+ Note that there is some special handling for the timing values.
+ From Tegra TRM:
+ Programming 0 means 1 clock cycle: actual cycle = programmed cycle + 1
+
+ - nvidia,snor-muxed-width: Number of cycles MUX address/data asserted on the
+ bus. Valid values are 0-15, default is 1
+ - nvidia,snor-hold-width: Number of cycles CE stays asserted after the
+ de-assertion of WR_N (in case of SLAVE/MASTER Request) or OE_N
+ (in case of MASTER Request). Valid values are 0-15, default is 1
+ - nvidia,snor-adv-width: Number of cycles during which ADV stays asserted.
+ Valid values are 0-15, default is 1.
+ - nvidia,snor-ce-width: Number of cycles before CE is asserted.
+ Valid values are 0-15, default is 4
+ - nvidia,snor-we-width: Number of cycles during which WE stays asserted.
+ Valid values are 0-15, default is 1
+ - nvidia,snor-oe-width: Number of cycles during which OE stays asserted.
+ Valid values are 0-255, default is 1
+ - nvidia,snor-wait-width: Number of cycles before READY is asserted.
+ Valid values are 0-255, default is 3
+
+Example with two SJA1000 CAN controllers connected to the GMI bus. We wrap the
+controllers with a simple-bus node since they are all connected to the same
+chip-select (CS4), in this example external address decoding is provided:
+
+gmi@70009000 {
+ compatible = "nvidia,tegra20-gmi";
+ reg = <0x70009000 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clocks = <&tegra_car TEGRA20_CLK_NOR>;
+ clock-names = "gmi";
+ resets = <&tegra_car 42>;
+ reset-names = "gmi";
+ ranges = <4 0 0xd0000000 0xfffffff>;
+
+ bus@4,0 {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 4 0 0x40100>;
+
+ nvidia,snor-mux-mode;
+ nvidia,snor-adv-active-high;
+
+ can@0 {
+ reg = <0 0x100>;
+ ...
+ };
+
+ can@40000 {
+ reg = <0x40000 0x100>;
+ ...
+ };
+ };
+};
+
+Example with one SJA1000 CAN controller connected to the GMI bus
+on CS4:
+
+gmi@70009000 {
+ compatible = "nvidia,tegra20-gmi";
+ reg = <0x70009000 0x1000>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ clocks = <&tegra_car TEGRA20_CLK_NOR>;
+ clock-names = "gmi";
+ resets = <&tegra_car 42>;
+ reset-names = "gmi";
+ ranges = <4 0 0xd0000000 0xfffffff>;
+
+ can@4,0 {
+ reg = <4 0 0x100>;
+ nvidia,snor-mux-mode;
+ nvidia,snor-adv-active-high;
+ ...
+ };
+};
diff --git a/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt
new file mode 100644
index 000000000..3108d0380
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/nvidia,tegra210-aconnect.txt
@@ -0,0 +1,44 @@
+NVIDIA Tegra ACONNECT Bus
+
+The Tegra ACONNECT bus is an AXI switch which is used to connnect various
+components inside the Audio Processing Engine (APE). All CPU accesses to
+the APE subsystem go through the ACONNECT via an APB to AXI wrapper.
+
+Required properties:
+- compatible: Must be "nvidia,tegra210-aconnect".
+- clocks: Must contain the entries for the APE clock (TEGRA210_CLK_APE),
+ and APE interface clock (TEGRA210_CLK_APB2APE).
+- clock-names: Must contain the names "ape" and "apb2ape" for the corresponding
+ 'clocks' entries.
+- power-domains: Must contain a phandle that points to the audio powergate
+ (namely 'aud') for Tegra210.
+- #address-cells: The number of cells used to represent physical base addresses
+ in the aconnect address space. Should be 1.
+- #size-cells: The number of cells used to represent the size of an address
+ range in the aconnect address space. Should be 1.
+- ranges: Mapping of the aconnect address space to the CPU address space.
+
+All devices accessed via the ACONNNECT are described by child-nodes.
+
+Example:
+
+ aconnect@702c0000 {
+ compatible = "nvidia,tegra210-aconnect";
+ clocks = <&tegra_car TEGRA210_CLK_APE>,
+ <&tegra_car TEGRA210_CLK_APB2APE>;
+ clock-names = "ape", "apb2ape";
+ power-domains = <&pd_audio>;
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0x702c0000 0x0 0x702c0000 0x00040000>;
+
+
+ child1 {
+ ...
+ };
+
+ child2 {
+ ...
+ };
+ };
diff --git a/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
new file mode 100644
index 000000000..18729f6fe
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/omap-ocp2scp.txt
@@ -0,0 +1,29 @@
+* OMAP OCP2SCP - ocp interface to scp interface
+
+properties:
+- compatible : Should be "ti,am437x-ocp2scp" for AM437x processor
+ Should be "ti,omap-ocp2scp" for all others
+- reg : Address and length of the register set for the device
+- #address-cells, #size-cells : Must be present if the device has sub-nodes
+- ranges : the child address space are mapped 1:1 onto the parent address space
+- ti,hwmods : must be "ocp2scp_usb_phy"
+
+Sub-nodes:
+All the devices connected to ocp2scp are described using sub-node to ocp2scp
+
+ocp2scp@4a0ad000 {
+ compatible = "ti,omap-ocp2scp";
+ reg = <0x4a0ad000 0x1f>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ ti,hwmods = "ocp2scp_usb_phy";
+
+ subnode1 {
+ ...
+ };
+
+ subnode2 {
+ ...
+ };
+};
diff --git a/Documentation/devicetree/bindings/bus/qcom,ebi2.txt b/Documentation/devicetree/bindings/bus/qcom,ebi2.txt
new file mode 100644
index 000000000..5058aa2c6
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/qcom,ebi2.txt
@@ -0,0 +1,138 @@
+Qualcomm External Bus Interface 2 (EBI2)
+
+The EBI2 contains two peripheral blocks: XMEM and LCDC. The XMEM handles any
+external memory (such as NAND or other memory-mapped peripherals) whereas
+LCDC handles LCD displays.
+
+As it says it connects devices to an external bus interface, meaning address
+lines (up to 9 address lines so can only address 1KiB external memory space),
+data lines (16 bits), OE (output enable), ADV (address valid, used on some
+NOR flash memories), WE (write enable). This on top of 6 different chip selects
+(CS0 thru CS5) so that in theory 6 different devices can be connected.
+
+Apparently this bus is clocked at 64MHz. It has dedicated pins on the package
+and the bus can only come out on these pins, however if some of the pins are
+unused they can be left unconnected or remuxed to be used as GPIO or in some
+cases other orthogonal functions as well.
+
+Also CS1 and CS2 has -A and -B signals. Why they have that is unclear to me.
+
+The chip selects have the following memory range assignments. This region of
+memory is referred to as "Chip Peripheral SS FPB0" and is 168MB big.
+
+Chip Select Physical address base
+CS0 GPIO134 0x1a800000-0x1b000000 (8MB)
+CS1 GPIO39 (A) / GPIO123 (B) 0x1b000000-0x1b800000 (8MB)
+CS2 GPIO40 (A) / GPIO124 (B) 0x1b800000-0x1c000000 (8MB)
+CS3 GPIO133 0x1d000000-0x25000000 (128 MB)
+CS4 GPIO132 0x1c800000-0x1d000000 (8MB)
+CS5 GPIO131 0x1c000000-0x1c800000 (8MB)
+
+The APQ8060 Qualcomm Application Processor User Guide, 80-N7150-14 Rev. A,
+August 6, 2012 contains some incomplete documentation of the EBI2.
+
+FIXME: the manual mentions "write precharge cycles" and "precharge cycles".
+We have not been able to figure out which bit fields these correspond to
+in the hardware, or what valid values exist. The current hypothesis is that
+this is something just used on the FAST chip selects and that the SLOW
+chip selects are understood fully. There is also a "byte device enable"
+flag somewhere for 8bit memories.
+
+FIXME: The chipselects have SLOW and FAST configuration registers. It's a bit
+unclear what this means, if they are mutually exclusive or can be used
+together, or if some chip selects are hardwired to be FAST and others are SLOW
+by design.
+
+The XMEM registers are totally undocumented but could be partially decoded
+because the Cypress AN49576 Antioch Westbridge apparently has suspiciously
+similar register layout, see: http://www.cypress.com/file/105771/download
+
+Required properties:
+- compatible: should be one of:
+ "qcom,msm8660-ebi2"
+ "qcom,apq8060-ebi2"
+- #address-cells: should be <2>: the first cell is the chipselect,
+ the second cell is the offset inside the memory range
+- #size-cells: should be <1>
+- ranges: should be set to:
+ ranges = <0 0x0 0x1a800000 0x00800000>,
+ <1 0x0 0x1b000000 0x00800000>,
+ <2 0x0 0x1b800000 0x00800000>,
+ <3 0x0 0x1d000000 0x08000000>,
+ <4 0x0 0x1c800000 0x00800000>,
+ <5 0x0 0x1c000000 0x00800000>;
+- reg: two ranges of registers: EBI2 config and XMEM config areas
+- reg-names: should be "ebi2", "xmem"
+- clocks: two clocks, EBI_2X and EBI
+- clock-names: should be "ebi2x", "ebi2"
+
+Optional subnodes:
+- Nodes inside the EBI2 will be considered device nodes.
+
+The following optional properties are properties that can be tagged onto
+any device subnode. We are assuming that there can be only ONE device per
+chipselect subnode, else the properties will become ambiguous.
+
+Optional properties arrays for SLOW chip selects:
+- qcom,xmem-recovery-cycles: recovery cycles is the time the memory continues to
+ drive the data bus after OE is de-asserted, in order to avoid contention on
+ the data bus. They are inserted when reading one CS and switching to another
+ CS or read followed by write on the same CS. Valid values 0 thru 15. Minimum
+ value is actually 1, so a value of 0 will still yield 1 recovery cycle.
+- qcom,xmem-write-hold-cycles: write hold cycles, these are extra cycles
+ inserted after every write minimum 1. The data out is driven from the time
+ WE is asserted until CS is asserted. With a hold of 1 (value = 0), the CS
+ stays active for 1 extra cycle etc. Valid values 0 thru 15.
+- qcom,xmem-write-delta-cycles: initial latency for write cycles inserted for
+ the first write to a page or burst memory. Valid values 0 thru 255.
+- qcom,xmem-read-delta-cycles: initial latency for read cycles inserted for the
+ first read to a page or burst memory. Valid values 0 thru 255.
+- qcom,xmem-write-wait-cycles: number of wait cycles for every write access, 0=1
+ cycle. Valid values 0 thru 15.
+- qcom,xmem-read-wait-cycles: number of wait cycles for every read access, 0=1
+ cycle. Valid values 0 thru 15.
+
+Optional properties arrays for FAST chip selects:
+- qcom,xmem-address-hold-enable: this is a boolean property stating that we
+ shall hold the address for an extra cycle to meet hold time requirements
+ with ADV assertion.
+- qcom,xmem-adv-to-oe-recovery-cycles: the number of cycles elapsed before an OE
+ assertion, with respect to the cycle where ADV (address valid) is asserted.
+ 2 means 2 cycles between ADV and OE. Valid values 0, 1, 2 or 3.
+- qcom,xmem-read-hold-cycles: the length in cycles of the first segment of a
+ read transfer. For a single read transfer this will be the time from CS
+ assertion to OE assertion. Valid values 0 thru 15.
+
+
+Example:
+
+ebi2@1a100000 {
+ compatible = "qcom,apq8060-ebi2";
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x1a800000 0x00800000>,
+ <1 0x0 0x1b000000 0x00800000>,
+ <2 0x0 0x1b800000 0x00800000>,
+ <3 0x0 0x1d000000 0x08000000>,
+ <4 0x0 0x1c800000 0x00800000>,
+ <5 0x0 0x1c000000 0x00800000>;
+ reg = <0x1a100000 0x1000>, <0x1a110000 0x1000>;
+ reg-names = "ebi2", "xmem";
+ clocks = <&gcc EBI2_2X_CLK>, <&gcc EBI2_CLK>;
+ clock-names = "ebi2x", "ebi2";
+ /* Make sure to set up the pin control for the EBI2 */
+ pinctrl-names = "default";
+ pinctrl-0 = <&foo_ebi2_pins>;
+
+ foo-ebi2@2,0 {
+ compatible = "foo";
+ reg = <2 0x0 0x100>;
+ (...)
+ qcom,xmem-recovery-cycles = <0>;
+ qcom,xmem-write-hold-cycles = <3>;
+ qcom,xmem-write-delta-cycles = <31>;
+ qcom,xmem-read-delta-cycles = <28>;
+ qcom,xmem-write-wait-cycles = <9>;
+ qcom,xmem-read-wait-cycles = <9>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/bus/renesas,bsc.yaml b/Documentation/devicetree/bindings/bus/renesas,bsc.yaml
new file mode 100644
index 000000000..f53a37785
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/renesas,bsc.yaml
@@ -0,0 +1,62 @@
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/renesas,bsc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas Bus State Controller (BSC)
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+ The Renesas Bus State Controller (BSC, sometimes called "LBSC within Bus
+ Bridge", or "External Bus Interface") can be found in several Renesas ARM
+ SoCs. It provides an external bus for connecting multiple external
+ devices to the SoC, driving several chip select lines, for e.g. NOR
+ FLASH, Ethernet and USB.
+
+ While the BSC is a fairly simple memory-mapped bus, it may be part of a
+ PM domain, and may have a gateable functional clock. Before a device
+ connected to the BSC can be accessed, the PM domain containing the BSC
+ must be powered on, and the functional clock driving the BSC must be
+ enabled.
+
+ The bindings for the BSC extend the bindings for "simple-pm-bus".
+
+allOf:
+ - $ref: simple-pm-bus.yaml#
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - renesas,bsc-r8a73a4 # R-Mobile APE6 (r8a73a4)
+ - renesas,bsc-sh73a0 # SH-Mobile AG5 (sh73a0)
+ - const: renesas,bsc
+ - {} # simple-pm-bus, but not listed here to avoid false select
+
+ reg:
+ maxItems: 1
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - reg
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ bsc: bus@fec10000 {
+ compatible = "renesas,bsc-sh73a0", "renesas,bsc", "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0 0x20000000>;
+ reg = <0xfec10000 0x400>;
+ interrupts = <0 39 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&zb_clk>;
+ power-domains = <&pd_a4s>;
+ };
diff --git a/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml
new file mode 100644
index 000000000..182134d7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/simple-pm-bus.yaml
@@ -0,0 +1,77 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/simple-pm-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Simple Power-Managed Bus
+
+maintainers:
+ - Geert Uytterhoeven <geert+renesas@glider.be>
+
+description: |
+ A Simple Power-Managed Bus is a transparent bus that doesn't need a real
+ driver, as it's typically initialized by the boot loader.
+
+ However, its bus controller is part of a PM domain, or under the control
+ of a functional clock. Hence, the bus controller's PM domain and/or
+ clock must be enabled for child devices connected to the bus (either
+ on-SoC or externally) to function.
+
+ While "simple-pm-bus" follows the "simple-bus" set of properties, as
+ specified in the Devicetree Specification, it is not an extension of
+ "simple-bus".
+
+properties:
+ $nodename:
+ pattern: "^bus(@[0-9a-f]+)?$"
+
+ compatible:
+ contains:
+ const: simple-pm-bus
+ description:
+ Shall contain "simple-pm-bus" in addition to a optional bus-specific
+ compatible strings defined in individual pm-bus bindings.
+
+ '#address-cells':
+ enum: [ 1, 2 ]
+
+ '#size-cells':
+ enum: [ 1, 2 ]
+
+ ranges: true
+
+ clocks: true
+ # Functional clocks
+ # Required if power-domains is absent, optional otherwise
+
+ power-domains:
+ # Required if clocks is absent, optional otherwise
+ minItems: 1
+
+required:
+ - compatible
+ - '#address-cells'
+ - '#size-cells'
+ - ranges
+
+anyOf:
+ - required:
+ - clocks
+ - required:
+ - power-domains
+
+additionalProperties: true
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-msm8996.h>
+ #include <dt-bindings/interrupt-controller/irq.h>
+
+ bus {
+ power-domains = <&gcc AGGRE0_NOC_GDSC>;
+ compatible = "simple-pm-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ };
diff --git a/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml
new file mode 100644
index 000000000..49df13fc2
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/socionext,uniphier-system-bus.yaml
@@ -0,0 +1,103 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/bus/socionext,uniphier-system-bus.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: UniPhier System Bus
+
+description: |
+ The UniPhier System Bus is an external bus that connects on-board devices to
+ the UniPhier SoC. It is a simple (semi-)parallel bus with address, data, and
+ some control signals. It supports up to 8 banks (chip selects).
+
+ Before any access to the bus, the bus controller must be configured; the bus
+ controller registers provide the control for the translation from the offset
+ within each bank to the CPU-viewed address. The needed setup includes the
+ base address, the size of each bank. Optionally, some timing parameters can
+ be optimized for faster bus access.
+
+maintainers:
+ - Masahiro Yamada <yamada.masahiro@socionext.com>
+
+properties:
+ compatible:
+ const: socionext,uniphier-system-bus
+
+ reg:
+ maxItems: 1
+
+ "#address-cells":
+ description: |
+ The first cell is the bank number (chip select).
+ The second cell is the address offset within the bank.
+ const: 2
+
+ "#size-cells":
+ const: 1
+
+ ranges:
+ description: |
+ Provide address translation from the System Bus to the parent bus.
+
+ Note:
+ The address region(s) that can be assigned for the System Bus is
+ implementation defined. Some SoCs can use 0x00000000-0x0fffffff and
+ 0x40000000-0x4fffffff, while other SoCs only 0x40000000-0x4fffffff.
+ There might be additional limitations depending on SoCs and the boot mode.
+ The address translation is arbitrary as long as the banks are assigned in
+ the supported address space with the required alignment and they do not
+ overlap one another.
+
+ For example, it is possible to map:
+ bank 0 to 0x42000000-0x43ffffff, bank 5 to 0x46000000-0x46ffffff
+ It is also possible to map:
+ bank 0 to 0x48000000-0x49ffffff, bank 5 to 0x44000000-0x44ffffff
+ There is no reason to stick to a particular translation mapping, but the
+ "ranges" property should provide a "reasonable" default that is known to
+ work. The software should initialize the bus controller according to it.
+
+patternProperties:
+ "^.*@[1-5],[1-9a-f][0-9a-f]+$":
+ description: Devices attached to chip selects
+ type: object
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+ - ranges
+
+additionalProperties: false
+
+examples:
+ - |
+ // In this example,
+ // - the Ethernet device is connected at the offset 0x01f00000 of CS1 and
+ // mapped to 0x43f00000 of the parent bus.
+ // - the UART device is connected at the offset 0x00200000 of CS5 and
+ // mapped to 0x46200000 of the parent bus.
+
+ system-bus@58c00000 {
+ compatible = "socionext,uniphier-system-bus";
+ reg = <0x58c00000 0x400>;
+ #address-cells = <2>;
+ #size-cells = <1>;
+ ranges = <1 0x00000000 0x42000000 0x02000000>,
+ <5 0x00000000 0x46000000 0x01000000>;
+
+ ethernet@1,1f00000 {
+ compatible = "smsc,lan9115";
+ reg = <1 0x01f00000 0x1000>;
+ interrupts = <0 48 4>;
+ phy-mode = "mii";
+ };
+
+ serial@5,200000 {
+ compatible = "ns16550a";
+ reg = <5 0x00200000 0x20>;
+ interrupts = <0 49 4>;
+ clock-frequency = <12288000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/bus/ti,da850-mstpri.txt b/Documentation/devicetree/bindings/bus/ti,da850-mstpri.txt
new file mode 100644
index 000000000..72daefc6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/ti,da850-mstpri.txt
@@ -0,0 +1,20 @@
+* Device tree bindings for Texas Instruments da8xx master peripheral
+ priority driver
+
+DA8XX SoCs feature a set of registers allowing to change the priority of all
+peripherals classified as masters.
+
+Documentation:
+OMAP-L138 (DA850) - http://www.ti.com/lit/ug/spruh82c/spruh82c.pdf
+
+Required properties:
+
+- compatible: "ti,da850-mstpri" - for da850 based boards
+- reg: offset and length of the mstpri registers
+
+Example for da850-lcdk is shown below.
+
+mstpri {
+ compatible = "ti,da850-mstpri";
+ reg = <0x14110 0x0c>;
+};
diff --git a/Documentation/devicetree/bindings/bus/ti-sysc.txt b/Documentation/devicetree/bindings/bus/ti-sysc.txt
new file mode 100644
index 000000000..c984143d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/ti-sysc.txt
@@ -0,0 +1,139 @@
+Texas Instruments sysc interconnect target module wrapper binding
+
+Texas Instruments SoCs can have a generic interconnect target module
+hardware for devices connected to various interconnects such as L3
+interconnect (Arteris NoC) and L4 interconnect (Sonics s3220). The sysc
+is mostly used for interaction between module and PRCM. It participates
+in the OCP Disconnect Protocol but other than that is mostly independent
+of the interconnect.
+
+Each interconnect target module can have one or more devices connected to
+it. There is a set of control registers for managing interconnect target
+module clocks, idle modes and interconnect level resets for the module.
+
+These control registers are sprinkled into the unused register address
+space of the first child device IP block managed by the interconnect
+target module and typically are named REVISION, SYSCONFIG and SYSSTATUS.
+
+Required standard properties:
+
+- compatible shall be one of the following generic types:
+
+ "ti,sysc"
+ "ti,sysc-omap2"
+ "ti,sysc-omap4"
+ "ti,sysc-omap4-simple"
+
+ or one of the following derivative types for hardware
+ needing special workarounds:
+
+ "ti,sysc-omap2-timer"
+ "ti,sysc-omap4-timer"
+ "ti,sysc-omap3430-sr"
+ "ti,sysc-omap3630-sr"
+ "ti,sysc-omap4-sr"
+ "ti,sysc-omap3-sham"
+ "ti,sysc-omap-aes"
+ "ti,sysc-mcasp"
+ "ti,sysc-dra7-mcasp"
+ "ti,sysc-usb-host-fs"
+ "ti,sysc-dra7-mcan"
+ "ti,sysc-pruss"
+
+- reg shall have register areas implemented for the interconnect
+ target module in question such as revision, sysc and syss
+
+- reg-names shall contain the register names implemented for the
+ interconnect target module in question such as
+ "rev, "sysc", and "syss"
+
+- ranges shall contain the interconnect target module IO range
+ available for one or more child device IP blocks managed
+ by the interconnect target module, the ranges may include
+ multiple ranges such as device L4 range for control and
+ parent L3 range for DMA access
+
+Optional properties:
+
+- ti,sysc-mask shall contain mask of supported register bits for the
+ SYSCONFIG register as documented in the Technical Reference
+ Manual (TRM) for the interconnect target module
+
+- ti,sysc-midle list of master idle modes supported by the interconnect
+ target module as documented in the TRM for SYSCONFIG
+ register MIDLEMODE bits
+
+- ti,sysc-sidle list of slave idle modes supported by the interconnect
+ target module as documented in the TRM for SYSCONFIG
+ register SIDLEMODE bits
+
+- ti,sysc-delay-us delay needed after OCP softreset before accssing
+ SYSCONFIG register again
+
+- ti,syss-mask optional mask of reset done status bits as described in the
+ TRM for SYSSTATUS registers, typically 1 with some devices
+ having separate reset done bits for children like OHCI and
+ EHCI
+
+- clocks clock specifier for each name in the clock-names as
+ specified in the binding documentation for ti-clkctrl,
+ typically available for all interconnect targets on TI SoCs
+ based on omap4 except if it's read-only register in hwauto
+ mode as for example omap4 L4_CFG_CLKCTRL
+
+- clock-names should contain at least "fck", and optionally also "ick"
+ depending on the SoC and the interconnect target module,
+ some interconnect target modules also need additional
+ optional clocks that can be specified as listed in TRM
+ for the related CLKCTRL register bits 8 to 15 such as
+ "dbclk" or "clk32k" depending on their role
+
+- ti,hwmods optional TI interconnect module name to use legacy
+ hwmod platform data
+
+- ti,no-reset-on-init interconnect target module should not be reset at init
+
+- ti,no-idle-on-init interconnect target module should not be idled at init
+
+- ti,no-idle interconnect target module should not be idled
+
+Example: Single instance of MUSB controller on omap4 using interconnect ranges
+using offsets from l4_cfg second segment (0x4a000000 + 0x80000 = 0x4a0ab000):
+
+ target-module@2b000 { /* 0x4a0ab000, ap 84 12.0 */
+ compatible = "ti,sysc-omap2";
+ ti,hwmods = "usb_otg_hs";
+ reg = <0x2b400 0x4>,
+ <0x2b404 0x4>,
+ <0x2b408 0x4>;
+ reg-names = "rev", "sysc", "syss";
+ clocks = <&l3_init_clkctrl OMAP4_USB_OTG_HS_CLKCTRL 0>;
+ clock-names = "fck";
+ ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
+ SYSC_OMAP2_SOFTRESET |
+ SYSC_OMAP2_AUTOIDLE)>;
+ ti,sysc-midle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>;
+ ti,sysc-sidle = <SYSC_IDLE_FORCE>,
+ <SYSC_IDLE_NO>,
+ <SYSC_IDLE_SMART>,
+ <SYSC_IDLE_SMART_WKUP>;
+ ti,syss-mask = <1>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x2b000 0x1000>;
+
+ usb_otg_hs: otg@0 {
+ compatible = "ti,omap4-musb";
+ reg = <0x0 0x7ff>;
+ interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
+ usb-phy = <&usb2_phy>;
+ ...
+ };
+ };
+
+Note that other SoCs, such as am335x can have multiple child devices. On am335x
+there are two MUSB instances, two USB PHY instances, and a single CPPI41 DMA
+instance as children of a single interconnect target module.
diff --git a/Documentation/devicetree/bindings/bus/ts-nbus.txt b/Documentation/devicetree/bindings/bus/ts-nbus.txt
new file mode 100644
index 000000000..2a10d065b
--- /dev/null
+++ b/Documentation/devicetree/bindings/bus/ts-nbus.txt
@@ -0,0 +1,50 @@
+Technologic Systems NBUS
+
+The NBUS is a bus used to interface with peripherals in the Technologic
+Systems FPGA on the TS-4600 SoM.
+
+Required properties :
+ - compatible : "technologic,ts-nbus"
+ - #address-cells : must be 1
+ - #size-cells : must be 0
+ - pwms : The PWM bound to the FPGA
+ - ts,data-gpios : The 8 GPIO pins connected to the data lines on the FPGA
+ - ts,csn-gpios : The GPIO pin connected to the csn line on the FPGA
+ - ts,txrx-gpios : The GPIO pin connected to the txrx line on the FPGA
+ - ts,strobe-gpios : The GPIO pin connected to the stobe line on the FPGA
+ - ts,ale-gpios : The GPIO pin connected to the ale line on the FPGA
+ - ts,rdy-gpios : The GPIO pin connected to the rdy line on the FPGA
+
+Child nodes:
+
+The NBUS node can contain zero or more child nodes representing peripherals
+on the bus.
+
+Example:
+
+ nbus {
+ compatible = "technologic,ts-nbus";
+ pinctrl-0 = <&nbus_pins>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ pwms = <&pwm 2 83>;
+ ts,data-gpios = <&gpio0 0 GPIO_ACTIVE_HIGH
+ &gpio0 1 GPIO_ACTIVE_HIGH
+ &gpio0 2 GPIO_ACTIVE_HIGH
+ &gpio0 3 GPIO_ACTIVE_HIGH
+ &gpio0 4 GPIO_ACTIVE_HIGH
+ &gpio0 5 GPIO_ACTIVE_HIGH
+ &gpio0 6 GPIO_ACTIVE_HIGH
+ &gpio0 7 GPIO_ACTIVE_HIGH>;
+ ts,csn-gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>;
+ ts,txrx-gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>;
+ ts,strobe-gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>;
+ ts,ale-gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
+ ts,rdy-gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>;
+
+ watchdog@2a {
+ compatible = "...";
+
+ /* ... */
+ };
+ };