summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/devfreq
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-27 10:05:51 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-27 10:05:51 +0000
commit5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch)
treea94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/devicetree/bindings/devfreq
parentInitial commit. (diff)
downloadlinux-430c2fc249ea5c0536abd21c23382884005c9093.tar.xz
linux-430c2fc249ea5c0536abd21c23382884005c9093.zip
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/devicetree/bindings/devfreq')
-rw-r--r--Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt26
-rw-r--r--Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt169
-rw-r--r--Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt18
-rw-r--r--Documentation/devicetree/bindings/devfreq/exynos-bus.txt421
-rw-r--r--Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt215
5 files changed, 849 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt b/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt
new file mode 100644
index 000000000..aeaebd425
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/event/exynos-nocp.txt
@@ -0,0 +1,26 @@
+
+* Samsung Exynos NoC (Network on Chip) Probe device
+
+The Samsung Exynos542x SoC has NoC (Network on Chip) Probe for NoC bus.
+NoC provides the primitive values to get the performance data. The packets
+that the Network on Chip (NoC) probes detects are transported over
+the network infrastructure to observer units. You can configure probes to
+capture packets with header or data on the data request response network,
+or as traffic debug or statistic collectors. Exynos542x bus has multiple
+NoC probes to provide bandwidth information about behavior of the SoC
+that you can use while analyzing system performance.
+
+Required properties:
+- compatible: Should be "samsung,exynos5420-nocp"
+- reg: physical base address of each NoC Probe and length of memory mapped region.
+
+Optional properties:
+- clock-names : the name of clock used by the NoC Probe, "nocp"
+- clocks : phandles for clock specified in "clock-names" property
+
+Example : NoC Probe nodes in Device Tree are listed below.
+
+ nocp_mem0_0: nocp@10ca1000 {
+ compatible = "samsung,exynos5420-nocp";
+ reg = <0x10CA1000 0x200>;
+ };
diff --git a/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt b/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
new file mode 100644
index 000000000..fb46b4917
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/event/exynos-ppmu.txt
@@ -0,0 +1,169 @@
+
+* Samsung Exynos PPMU (Platform Performance Monitoring Unit) device
+
+The Samsung Exynos SoC has PPMU (Platform Performance Monitoring Unit) for
+each IP. PPMU provides the primitive values to get performance data. These
+PPMU events provide information of the SoC's behaviors so that you may
+use to analyze system performance, to make behaviors visible and to count
+usages of each IP (DMC, CPU, RIGHTBUS, LEFTBUS, CAM interface, LCD, G3D, MFC).
+The Exynos PPMU driver uses the devfreq-event class to provide event data
+to various devfreq devices. The devfreq devices would use the event data when
+derterming the current state of each IP.
+
+Required properties for PPMU device:
+- compatible: Should be "samsung,exynos-ppmu" or "samsung,exynos-ppmu-v2.
+- reg: physical base address of each PPMU and length of memory mapped region.
+
+Optional properties for PPMU device:
+- clock-names : the name of clock used by the PPMU, "ppmu"
+- clocks : phandles for clock specified in "clock-names" property
+
+Required properties for 'events' child node of PPMU device:
+- event-name : the unique event name among PPMU device
+Optional properties for 'events' child node of PPMU device:
+- event-data-type : Define the type of data which shell be counted
+by the counter. You can check include/dt-bindings/pmu/exynos_ppmu.h for
+all possible type, i.e. count read requests, count write data in bytes,
+etc. This field is optional and when it is missing, the driver code
+will use default data type.
+
+Example1 : PPMUv1 nodes in exynos3250.dtsi are listed below.
+
+ ppmu_dmc0: ppmu_dmc0@106a0000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x106a0000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_dmc1: ppmu_dmc1@106b0000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x106b0000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_cpu: ppmu_cpu@106c0000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x106c0000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_rightbus: ppmu_rightbus@112a0000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x112a0000 0x2000>;
+ clocks = <&cmu CLK_PPMURIGHT>;
+ clock-names = "ppmu";
+ status = "disabled";
+ };
+
+ ppmu_leftbus: ppmu_leftbus0@116a0000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x116a0000 0x2000>;
+ clocks = <&cmu CLK_PPMULEFT>;
+ clock-names = "ppmu";
+ status = "disabled";
+ };
+
+Example2 : Events of each PPMU node in exynos3250-rinato.dts are listed below.
+
+ &ppmu_dmc0 {
+ status = "okay";
+
+ events {
+ ppmu_dmc0_3: ppmu-event3-dmc0 {
+ event-name = "ppmu-event3-dmc0";
+ };
+
+ ppmu_dmc0_2: ppmu-event2-dmc0 {
+ event-name = "ppmu-event2-dmc0";
+ };
+
+ ppmu_dmc0_1: ppmu-event1-dmc0 {
+ event-name = "ppmu-event1-dmc0";
+ };
+
+ ppmu_dmc0_0: ppmu-event0-dmc0 {
+ event-name = "ppmu-event0-dmc0";
+ };
+ };
+ };
+
+ &ppmu_dmc1 {
+ status = "okay";
+
+ events {
+ ppmu_dmc1_3: ppmu-event3-dmc1 {
+ event-name = "ppmu-event3-dmc1";
+ };
+ };
+ };
+
+ &ppmu_leftbus {
+ status = "okay";
+
+ events {
+ ppmu_leftbus_3: ppmu-event3-leftbus {
+ event-name = "ppmu-event3-leftbus";
+ };
+ };
+ };
+
+ &ppmu_rightbus {
+ status = "okay";
+
+ events {
+ ppmu_rightbus_3: ppmu-event3-rightbus {
+ event-name = "ppmu-event3-rightbus";
+ };
+ };
+ };
+
+Example3 : PPMUv2 nodes in exynos5433.dtsi are listed below.
+
+ ppmu_d0_cpu: ppmu_d0_cpu@10480000 {
+ compatible = "samsung,exynos-ppmu-v2";
+ reg = <0x10480000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_d0_general: ppmu_d0_general@10490000 {
+ compatible = "samsung,exynos-ppmu-v2";
+ reg = <0x10490000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_d0_rt: ppmu_d0_rt@104a0000 {
+ compatible = "samsung,exynos-ppmu-v2";
+ reg = <0x104a0000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_d1_cpu: ppmu_d1_cpu@104b0000 {
+ compatible = "samsung,exynos-ppmu-v2";
+ reg = <0x104b0000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_d1_general: ppmu_d1_general@104c0000 {
+ compatible = "samsung,exynos-ppmu-v2";
+ reg = <0x104c0000 0x2000>;
+ status = "disabled";
+ };
+
+ ppmu_d1_rt: ppmu_d1_rt@104d0000 {
+ compatible = "samsung,exynos-ppmu-v2";
+ reg = <0x104d0000 0x2000>;
+ status = "disabled";
+ };
+
+Example4 : 'event-data-type' in exynos4412-ppmu-common.dtsi are listed below.
+
+ &ppmu_dmc0 {
+ status = "okay";
+ events {
+ ppmu_dmc0_3: ppmu-event3-dmc0 {
+ event-name = "ppmu-event3-dmc0";
+ event-data-type = <(PPMU_RO_DATA_CNT |
+ PPMU_WO_DATA_CNT)>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt b/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt
new file mode 100644
index 000000000..148191b0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/event/rockchip-dfi.txt
@@ -0,0 +1,18 @@
+
+* Rockchip rk3399 DFI device
+
+Required properties:
+- compatible: Must be "rockchip,rk3399-dfi".
+- reg: physical base address of each DFI and length of memory mapped region
+- rockchip,pmu: phandle to the syscon managing the "pmu general register files"
+- clocks: phandles for clock specified in "clock-names" property
+- clock-names : the name of clock used by the DFI, must be "pclk_ddr_mon";
+
+Example:
+ dfi: dfi@ff630000 {
+ compatible = "rockchip,rk3399-dfi";
+ reg = <0x00 0xff630000 0x00 0x4000>;
+ rockchip,pmu = <&pmugrf>;
+ clocks = <&cru PCLK_DDR_MON>;
+ clock-names = "pclk_ddr_mon";
+ };
diff --git a/Documentation/devicetree/bindings/devfreq/exynos-bus.txt b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
new file mode 100644
index 000000000..e71f752cc
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/exynos-bus.txt
@@ -0,0 +1,421 @@
+* Generic Exynos Bus frequency device
+
+The Samsung Exynos SoC has many buses for data transfer between DRAM
+and sub-blocks in SoC. Most Exynos SoCs share the common architecture
+for buses. Generally, each bus of Exynos SoC includes a source clock
+and a power line, which are able to change the clock frequency
+of the bus in runtime. To monitor the usage of each bus in runtime,
+the driver uses the PPMU (Platform Performance Monitoring Unit), which
+is able to measure the current load of sub-blocks.
+
+The Exynos SoC includes the various sub-blocks which have the each AXI bus.
+The each AXI bus has the owned source clock but, has not the only owned
+power line. The power line might be shared among one more sub-blocks.
+So, we can divide into two type of device as the role of each sub-block.
+There are two type of bus devices as following:
+- parent bus device
+- passive bus device
+
+Basically, parent and passive bus device share the same power line.
+The parent bus device can only change the voltage of shared power line
+and the rest bus devices (passive bus device) depend on the decision of
+the parent bus device. If there are three blocks which share the VDD_xxx
+power line, Only one block should be parent device and then the rest blocks
+should depend on the parent device as passive device.
+
+ VDD_xxx |--- A block (parent)
+ |--- B block (passive)
+ |--- C block (passive)
+
+There are a little different composition among Exynos SoC because each Exynos
+SoC has different sub-blocks. Therefore, such difference should be specified
+in devicetree file instead of each device driver. In result, this driver
+is able to support the bus frequency for all Exynos SoCs.
+
+Required properties for all bus devices:
+- compatible: Should be "samsung,exynos-bus".
+- clock-names : the name of clock used by the bus, "bus".
+- clocks : phandles for clock specified in "clock-names" property.
+- operating-points-v2: the OPP table including frequency/voltage information
+ to support DVFS (Dynamic Voltage/Frequency Scaling) feature.
+
+Required properties only for parent bus device:
+- vdd-supply: the regulator to provide the buses with the voltage.
+- devfreq-events: the devfreq-event device to monitor the current utilization
+ of buses.
+
+Required properties only for passive bus device:
+- devfreq: the parent bus device.
+
+Optional properties only for parent bus device:
+- exynos,saturation-ratio: the percentage value which is used to calibrate
+ the performance count against total cycle count.
+
+Detailed correlation between sub-blocks and power line according to Exynos SoC:
+- In case of Exynos3250, there are two power line as following:
+ VDD_MIF |--- DMC
+
+ VDD_INT |--- LEFTBUS (parent device)
+ |--- PERIL
+ |--- MFC
+ |--- G3D
+ |--- RIGHTBUS
+ |--- PERIR
+ |--- FSYS
+ |--- LCD0
+ |--- PERIR
+ |--- ISP
+ |--- CAM
+
+- In case of Exynos4210, there is one power line as following:
+ VDD_INT |--- DMC (parent device)
+ |--- LEFTBUS
+ |--- PERIL
+ |--- MFC(L)
+ |--- G3D
+ |--- TV
+ |--- LCD0
+ |--- RIGHTBUS
+ |--- PERIR
+ |--- MFC(R)
+ |--- CAM
+ |--- FSYS
+ |--- GPS
+ |--- LCD0
+ |--- LCD1
+
+- In case of Exynos4x12, there are two power line as following:
+ VDD_MIF |--- DMC
+
+ VDD_INT |--- LEFTBUS (parent device)
+ |--- PERIL
+ |--- MFC(L)
+ |--- G3D
+ |--- TV
+ |--- IMAGE
+ |--- RIGHTBUS
+ |--- PERIR
+ |--- MFC(R)
+ |--- CAM
+ |--- FSYS
+ |--- GPS
+ |--- LCD0
+ |--- ISP
+
+- In case of Exynos5422, there are two power line as following:
+ VDD_MIF |--- DREX 0 (parent device, DRAM EXpress controller)
+ |--- DREX 1
+
+ VDD_INT |--- NoC_Core (parent device)
+ |--- G2D
+ |--- G3D
+ |--- DISP1
+ |--- NoC_WCORE
+ |--- GSCL
+ |--- MSCL
+ |--- ISP
+ |--- MFC
+ |--- GEN
+ |--- PERIS
+ |--- PERIC
+ |--- FSYS
+ |--- FSYS2
+
+- In case of Exynos5433, there is VDD_INT power line as following:
+ VDD_INT |--- G2D (parent device)
+ |--- MSCL
+ |--- GSCL
+ |--- JPEG
+ |--- MFC
+ |--- HEVC
+ |--- BUS0
+ |--- BUS1
+ |--- BUS2
+ |--- PERIS (Fixed clock rate)
+ |--- PERIC (Fixed clock rate)
+ |--- FSYS (Fixed clock rate)
+
+Example1:
+ Show the AXI buses of Exynos3250 SoC. Exynos3250 divides the buses to
+ power line (regulator). The MIF (Memory Interface) AXI bus is used to
+ transfer data between DRAM and CPU and uses the VDD_MIF regulator.
+
+ - MIF (Memory Interface) block
+ : VDD_MIF |--- DMC (Dynamic Memory Controller)
+
+ - INT (Internal) block
+ : VDD_INT |--- LEFTBUS (parent device)
+ |--- PERIL
+ |--- MFC
+ |--- G3D
+ |--- RIGHTBUS
+ |--- FSYS
+ |--- LCD0
+ |--- PERIR
+ |--- ISP
+ |--- CAM
+
+ - MIF bus's frequency/voltage table
+ -----------------------
+ |Lv| Freq | Voltage |
+ -----------------------
+ |L1| 50000 |800000 |
+ |L2| 100000 |800000 |
+ |L3| 134000 |800000 |
+ |L4| 200000 |825000 |
+ |L5| 400000 |875000 |
+ -----------------------
+
+ - INT bus's frequency/voltage table
+ ----------------------------------------------------------
+ |Block|LEFTBUS|RIGHTBUS|MCUISP |ISP |PERIL ||VDD_INT |
+ | name| |LCD0 | | | || |
+ | | |FSYS | | | || |
+ | | |MFC | | | || |
+ ----------------------------------------------------------
+ |Mode |*parent|passive |passive|passive|passive|| |
+ ----------------------------------------------------------
+ |Lv |Frequency ||Voltage |
+ ----------------------------------------------------------
+ |L1 |50000 |50000 |50000 |50000 |50000 ||900000 |
+ |L2 |80000 |80000 |80000 |80000 |80000 ||900000 |
+ |L3 |100000 |100000 |100000 |100000 |100000 ||1000000 |
+ |L4 |134000 |134000 |200000 |200000 | ||1000000 |
+ |L5 |200000 |200000 |400000 |300000 | ||1000000 |
+ ----------------------------------------------------------
+
+Example2 :
+ The bus of DMC (Dynamic Memory Controller) block in exynos3250.dtsi
+ is listed below:
+
+ bus_dmc: bus_dmc {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu_dmc CLK_DIV_DMC>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_dmc_opp_table>;
+ status = "disabled";
+ };
+
+ bus_dmc_opp_table: opp_table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ opp-microvolt = <800000>;
+ };
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ opp-microvolt = <800000>;
+ };
+ opp-134000000 {
+ opp-hz = /bits/ 64 <134000000>;
+ opp-microvolt = <800000>;
+ };
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <825000>;
+ };
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ opp-microvolt = <875000>;
+ };
+ };
+
+ bus_leftbus: bus_leftbus {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu CLK_DIV_GDL>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_leftbus_opp_table>;
+ status = "disabled";
+ };
+
+ bus_rightbus: bus_rightbus {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu CLK_DIV_GDR>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_leftbus_opp_table>;
+ status = "disabled";
+ };
+
+ bus_lcd0: bus_lcd0 {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu CLK_DIV_ACLK_160>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_leftbus_opp_table>;
+ status = "disabled";
+ };
+
+ bus_fsys: bus_fsys {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu CLK_DIV_ACLK_200>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_leftbus_opp_table>;
+ status = "disabled";
+ };
+
+ bus_mcuisp: bus_mcuisp {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu CLK_DIV_ACLK_400_MCUISP>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_mcuisp_opp_table>;
+ status = "disabled";
+ };
+
+ bus_isp: bus_isp {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu CLK_DIV_ACLK_266>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_isp_opp_table>;
+ status = "disabled";
+ };
+
+ bus_peril: bus_peril {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu CLK_DIV_ACLK_100>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_peril_opp_table>;
+ status = "disabled";
+ };
+
+ bus_mfc: bus_mfc {
+ compatible = "samsung,exynos-bus";
+ clocks = <&cmu CLK_SCLK_MFC>;
+ clock-names = "bus";
+ operating-points-v2 = <&bus_leftbus_opp_table>;
+ status = "disabled";
+ };
+
+ bus_leftbus_opp_table: opp_table1 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ opp-microvolt = <900000>;
+ };
+ opp-80000000 {
+ opp-hz = /bits/ 64 <80000000>;
+ opp-microvolt = <900000>;
+ };
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ opp-microvolt = <1000000>;
+ };
+ opp-134000000 {
+ opp-hz = /bits/ 64 <134000000>;
+ opp-microvolt = <1000000>;
+ };
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ opp-microvolt = <1000000>;
+ };
+ };
+
+ bus_mcuisp_opp_table: opp_table2 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ };
+ opp-80000000 {
+ opp-hz = /bits/ 64 <80000000>;
+ };
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+ opp-400000000 {
+ opp-hz = /bits/ 64 <400000000>;
+ };
+ };
+
+ bus_isp_opp_table: opp_table3 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ };
+ opp-80000000 {
+ opp-hz = /bits/ 64 <80000000>;
+ };
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+ opp-200000000 {
+ opp-hz = /bits/ 64 <200000000>;
+ };
+ opp-300000000 {
+ opp-hz = /bits/ 64 <300000000>;
+ };
+ };
+
+ bus_peril_opp_table: opp_table4 {
+ compatible = "operating-points-v2";
+ opp-shared;
+
+ opp-50000000 {
+ opp-hz = /bits/ 64 <50000000>;
+ };
+ opp-80000000 {
+ opp-hz = /bits/ 64 <80000000>;
+ };
+ opp-100000000 {
+ opp-hz = /bits/ 64 <100000000>;
+ };
+ };
+
+
+ Usage case to handle the frequency and voltage of bus on runtime
+ in exynos3250-rinato.dts is listed below:
+
+ &bus_dmc {
+ devfreq-events = <&ppmu_dmc0_3>, <&ppmu_dmc1_3>;
+ vdd-supply = <&buck1_reg>; /* VDD_MIF */
+ status = "okay";
+ };
+
+ &bus_leftbus {
+ devfreq-events = <&ppmu_leftbus_3>, <&ppmu_rightbus_3>;
+ vdd-supply = <&buck3_reg>;
+ status = "okay";
+ };
+
+ &bus_rightbus {
+ devfreq = <&bus_leftbus>;
+ status = "okay";
+ };
+
+ &bus_lcd0 {
+ devfreq = <&bus_leftbus>;
+ status = "okay";
+ };
+
+ &bus_fsys {
+ devfreq = <&bus_leftbus>;
+ status = "okay";
+ };
+
+ &bus_mcuisp {
+ devfreq = <&bus_leftbus>;
+ status = "okay";
+ };
+
+ &bus_isp {
+ devfreq = <&bus_leftbus>;
+ status = "okay";
+ };
+
+ &bus_peril {
+ devfreq = <&bus_leftbus>;
+ status = "okay";
+ };
+
+ &bus_mfc {
+ devfreq = <&bus_leftbus>;
+ status = "okay";
+ };
diff --git a/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
new file mode 100644
index 000000000..a10d1f6d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/devfreq/rk3399_dmc.txt
@@ -0,0 +1,215 @@
+* Rockchip rk3399 DMC (Dynamic Memory Controller) device
+
+Required properties:
+- compatible: Must be "rockchip,rk3399-dmc".
+- devfreq-events: Node to get DDR loading, Refer to
+ Documentation/devicetree/bindings/devfreq/event/
+ rockchip-dfi.txt
+- clocks: Phandles for clock specified in "clock-names" property
+- clock-names : The name of clock used by the DFI, must be
+ "pclk_ddr_mon";
+- operating-points-v2: Refer to Documentation/devicetree/bindings/opp/opp.txt
+ for details.
+- center-supply: DMC supply node.
+- status: Marks the node enabled/disabled.
+
+Optional properties:
+- interrupts: The CPU interrupt number. The interrupt specifier
+ format depends on the interrupt controller.
+ It should be a DCF interrupt. When DDR DVFS finishes
+ a DCF interrupt is triggered.
+- rockchip,pmu: Phandle to the syscon managing the "PMU general register
+ files".
+
+Following properties relate to DDR timing:
+
+- rockchip,dram_speed_bin : Value reference include/dt-bindings/clock/rk3399-ddr.h,
+ it selects the DDR3 cl-trp-trcd type. It must be
+ set according to "Speed Bin" in DDR3 datasheet,
+ DO NOT use a smaller "Speed Bin" than specified
+ for the DDR3 being used.
+
+- rockchip,pd_idle : Configure the PD_IDLE value. Defines the
+ power-down idle period in which memories are
+ placed into power-down mode if bus is idle
+ for PD_IDLE DFI clock cycles.
+
+- rockchip,sr_idle : Configure the SR_IDLE value. Defines the
+ self-refresh idle period in which memories are
+ placed into self-refresh mode if bus is idle
+ for SR_IDLE * 1024 DFI clock cycles (DFI
+ clocks freq is half of DRAM clock), default
+ value is "0".
+
+- rockchip,sr_mc_gate_idle : Defines the memory self-refresh and controller
+ clock gating idle period. Memories are placed
+ into self-refresh mode and memory controller
+ clock arg gating started if bus is idle for
+ sr_mc_gate_idle*1024 DFI clock cycles.
+
+- rockchip,srpd_lite_idle : Defines the self-refresh power down idle
+ period in which memories are placed into
+ self-refresh power down mode if bus is idle
+ for srpd_lite_idle * 1024 DFI clock cycles.
+ This parameter is for LPDDR4 only.
+
+- rockchip,standby_idle : Defines the standby idle period in which
+ memories are placed into self-refresh mode.
+ The controller, pi, PHY and DRAM clock will
+ be gated if bus is idle for standby_idle * DFI
+ clock cycles.
+
+- rockchip,dram_dll_dis_freq : Defines the DDR3 DLL bypass frequency in MHz.
+ When DDR frequency is less than DRAM_DLL_DISB_FREQ,
+ DDR3 DLL will be bypassed. Note: if DLL was bypassed,
+ the odt will also stop working.
+
+- rockchip,phy_dll_dis_freq : Defines the PHY dll bypass frequency in
+ MHz (Mega Hz). When DDR frequency is less than
+ DRAM_DLL_DISB_FREQ, PHY DLL will be bypassed.
+ Note: PHY DLL and PHY ODT are independent.
+
+- rockchip,ddr3_odt_dis_freq : When the DRAM type is DDR3, this parameter defines
+ the ODT disable frequency in MHz (Mega Hz).
+ when the DDR frequency is less then ddr3_odt_dis_freq,
+ the ODT on the DRAM side and controller side are
+ both disabled.
+
+- rockchip,ddr3_drv : When the DRAM type is DDR3, this parameter defines
+ the DRAM side driver strength in ohms. Default
+ value is DDR3_DS_40ohm.
+
+- rockchip,ddr3_odt : When the DRAM type is DDR3, this parameter defines
+ the DRAM side ODT strength in ohms. Default value
+ is DDR3_ODT_120ohm.
+
+- rockchip,phy_ddr3_ca_drv : When the DRAM type is DDR3, this parameter defines
+ the phy side CA line (incluing command line,
+ address line and clock line) driver strength.
+ Default value is PHY_DRV_ODT_40.
+
+- rockchip,phy_ddr3_dq_drv : When the DRAM type is DDR3, this parameter defines
+ the PHY side DQ line (including DQS/DQ/DM line)
+ driver strength. Default value is PHY_DRV_ODT_40.
+
+- rockchip,phy_ddr3_odt : When the DRAM type is DDR3, this parameter defines
+ the PHY side ODT strength. Default value is
+ PHY_DRV_ODT_240.
+
+- rockchip,lpddr3_odt_dis_freq : When the DRAM type is LPDDR3, this parameter defines
+ then ODT disable frequency in MHz (Mega Hz).
+ When DDR frequency is less then ddr3_odt_dis_freq,
+ the ODT on the DRAM side and controller side are
+ both disabled.
+
+- rockchip,lpddr3_drv : When the DRAM type is LPDDR3, this parameter defines
+ the DRAM side driver strength in ohms. Default
+ value is LP3_DS_34ohm.
+
+- rockchip,lpddr3_odt : When the DRAM type is LPDDR3, this parameter defines
+ the DRAM side ODT strength in ohms. Default value
+ is LP3_ODT_240ohm.
+
+- rockchip,phy_lpddr3_ca_drv : When the DRAM type is LPDDR3, this parameter defines
+ the PHY side CA line (including command line,
+ address line and clock line) driver strength.
+ Default value is PHY_DRV_ODT_40.
+
+- rockchip,phy_lpddr3_dq_drv : When the DRAM type is LPDDR3, this parameter defines
+ the PHY side DQ line (including DQS/DQ/DM line)
+ driver strength. Default value is
+ PHY_DRV_ODT_40.
+
+- rockchip,phy_lpddr3_odt : When dram type is LPDDR3, this parameter define
+ the phy side odt strength, default value is
+ PHY_DRV_ODT_240.
+
+- rockchip,lpddr4_odt_dis_freq : When the DRAM type is LPDDR4, this parameter
+ defines the ODT disable frequency in
+ MHz (Mega Hz). When the DDR frequency is less then
+ ddr3_odt_dis_freq, the ODT on the DRAM side and
+ controller side are both disabled.
+
+- rockchip,lpddr4_drv : When the DRAM type is LPDDR4, this parameter defines
+ the DRAM side driver strength in ohms. Default
+ value is LP4_PDDS_60ohm.
+
+- rockchip,lpddr4_dq_odt : When the DRAM type is LPDDR4, this parameter defines
+ the DRAM side ODT on DQS/DQ line strength in ohms.
+ Default value is LP4_DQ_ODT_40ohm.
+
+- rockchip,lpddr4_ca_odt : When the DRAM type is LPDDR4, this parameter defines
+ the DRAM side ODT on CA line strength in ohms.
+ Default value is LP4_CA_ODT_40ohm.
+
+- rockchip,phy_lpddr4_ca_drv : When the DRAM type is LPDDR4, this parameter defines
+ the PHY side CA line (including command address
+ line) driver strength. Default value is
+ PHY_DRV_ODT_40.
+
+- rockchip,phy_lpddr4_ck_cs_drv : When the DRAM type is LPDDR4, this parameter defines
+ the PHY side clock line and CS line driver
+ strength. Default value is PHY_DRV_ODT_80.
+
+- rockchip,phy_lpddr4_dq_drv : When the DRAM type is LPDDR4, this parameter defines
+ the PHY side DQ line (including DQS/DQ/DM line)
+ driver strength. Default value is PHY_DRV_ODT_80.
+
+- rockchip,phy_lpddr4_odt : When the DRAM type is LPDDR4, this parameter defines
+ the PHY side ODT strength. Default value is
+ PHY_DRV_ODT_60.
+
+Example:
+ dmc_opp_table: dmc_opp_table {
+ compatible = "operating-points-v2";
+
+ opp00 {
+ opp-hz = /bits/ 64 <300000000>;
+ opp-microvolt = <900000>;
+ };
+ opp01 {
+ opp-hz = /bits/ 64 <666000000>;
+ opp-microvolt = <900000>;
+ };
+ };
+
+ dmc: dmc {
+ compatible = "rockchip,rk3399-dmc";
+ devfreq-events = <&dfi>;
+ interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru SCLK_DDRCLK>;
+ clock-names = "dmc_clk";
+ operating-points-v2 = <&dmc_opp_table>;
+ center-supply = <&ppvar_centerlogic>;
+ upthreshold = <15>;
+ downdifferential = <10>;
+ rockchip,ddr3_speed_bin = <21>;
+ rockchip,pd_idle = <0x40>;
+ rockchip,sr_idle = <0x2>;
+ rockchip,sr_mc_gate_idle = <0x3>;
+ rockchip,srpd_lite_idle = <0x4>;
+ rockchip,standby_idle = <0x2000>;
+ rockchip,dram_dll_dis_freq = <300>;
+ rockchip,phy_dll_dis_freq = <125>;
+ rockchip,auto_pd_dis_freq = <666>;
+ rockchip,ddr3_odt_dis_freq = <333>;
+ rockchip,ddr3_drv = <DDR3_DS_40ohm>;
+ rockchip,ddr3_odt = <DDR3_ODT_120ohm>;
+ rockchip,phy_ddr3_ca_drv = <PHY_DRV_ODT_40>;
+ rockchip,phy_ddr3_dq_drv = <PHY_DRV_ODT_40>;
+ rockchip,phy_ddr3_odt = <PHY_DRV_ODT_240>;
+ rockchip,lpddr3_odt_dis_freq = <333>;
+ rockchip,lpddr3_drv = <LP3_DS_34ohm>;
+ rockchip,lpddr3_odt = <LP3_ODT_240ohm>;
+ rockchip,phy_lpddr3_ca_drv = <PHY_DRV_ODT_40>;
+ rockchip,phy_lpddr3_dq_drv = <PHY_DRV_ODT_40>;
+ rockchip,phy_lpddr3_odt = <PHY_DRV_ODT_240>;
+ rockchip,lpddr4_odt_dis_freq = <333>;
+ rockchip,lpddr4_drv = <LP4_PDDS_60ohm>;
+ rockchip,lpddr4_dq_odt = <LP4_DQ_ODT_40ohm>;
+ rockchip,lpddr4_ca_odt = <LP4_CA_ODT_40ohm>;
+ rockchip,phy_lpddr4_ca_drv = <PHY_DRV_ODT_40>;
+ rockchip,phy_lpddr4_ck_cs_drv = <PHY_DRV_ODT_80>;
+ rockchip,phy_lpddr4_dq_drv = <PHY_DRV_ODT_80>;
+ rockchip,phy_lpddr4_odt = <PHY_DRV_ODT_60>;
+ };