summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/display/imx
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-27 10:05:51 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-27 10:05:51 +0000
commit5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch)
treea94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/devicetree/bindings/display/imx
parentInitial commit. (diff)
downloadlinux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.tar.xz
linux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.zip
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/devicetree/bindings/display/imx')
-rw-r--r--Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt57
-rw-r--r--Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt162
-rw-r--r--Documentation/devicetree/bindings/display/imx/hdmi.txt65
-rw-r--r--Documentation/devicetree/bindings/display/imx/ldb.txt147
-rw-r--r--Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml108
5 files changed, 539 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
new file mode 100644
index 000000000..f4df9e83b
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl,imx-fb.txt
@@ -0,0 +1,57 @@
+Freescale imx21 Framebuffer
+
+This framebuffer driver supports devices imx1, imx21, imx25, and imx27.
+
+Required properties:
+- compatible : "fsl,<chip>-fb", chip should be imx1 or imx21
+- reg : Should contain 1 register ranges(address and length)
+- interrupts : One interrupt of the fb dev
+
+Required nodes:
+- display: Phandle to a display node as described in
+ Documentation/devicetree/bindings/display/panel/display-timing.txt
+ Additional, the display node has to define properties:
+ - bits-per-pixel: Bits per pixel
+ - fsl,pcr: LCDC PCR value
+ A display node may optionally define
+ - fsl,aus-mode: boolean to enable AUS mode (only for imx21)
+
+Optional properties:
+- lcd-supply: Regulator for LCD supply voltage.
+- fsl,dmacr: DMA Control Register value. This is optional. By default, the
+ register is not modified as recommended by the datasheet.
+- fsl,lpccr: Contrast Control Register value. This property provides the
+ default value for the contrast control register.
+ If that property is omitted, the register is zeroed.
+- fsl,lscr1: LCDC Sharp Configuration Register value.
+
+Example:
+
+ imxfb: fb@10021000 {
+ compatible = "fsl,imx21-fb";
+ interrupts = <61>;
+ reg = <0x10021000 0x1000>;
+ display = <&display0>;
+ };
+
+ ...
+
+ display0: display0 {
+ model = "Primeview-PD050VL1";
+ bits-per-pixel = <16>;
+ fsl,pcr = <0xf0c88080>; /* non-standard but required */
+ display-timings {
+ native-mode = <&timing_disp0>;
+ timing_disp0: 640x480 {
+ hactive = <640>;
+ vactive = <480>;
+ hback-porch = <112>;
+ hfront-porch = <36>;
+ hsync-len = <32>;
+ vback-porch = <33>;
+ vfront-porch = <33>;
+ vsync-len = <2>;
+ clock-frequency = <25000000>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
new file mode 100644
index 000000000..5a99490c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/fsl-imx-drm.txt
@@ -0,0 +1,162 @@
+Freescale i.MX DRM master device
+================================
+
+The freescale i.MX DRM master device is a virtual device needed to list all
+IPU or other display interface nodes that comprise the graphics subsystem.
+
+Required properties:
+- compatible: Should be "fsl,imx-display-subsystem"
+- ports: Should contain a list of phandles pointing to display interface ports
+ of IPU devices
+
+example:
+
+display-subsystem {
+ compatible = "fsl,display-subsystem";
+ ports = <&ipu_di0>;
+};
+
+
+Freescale i.MX IPUv3
+====================
+
+Required properties:
+- compatible: Should be "fsl,<chip>-ipu" where <chip> is one of
+ - imx51
+ - imx53
+ - imx6q
+ - imx6qp
+- reg: should be register base and length as documented in the
+ datasheet
+- interrupts: Should contain sync interrupt and error interrupt,
+ in this order.
+- resets: phandle pointing to the system reset controller and
+ reset line index, see reset/fsl,imx-src.txt for details
+Additional required properties for fsl,imx6qp-ipu:
+- fsl,prg: phandle to prg node associated with this IPU instance
+Optional properties:
+- port@[0-3]: Port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+ Ports 0 and 1 should correspond to CSI0 and CSI1,
+ ports 2 and 3 should correspond to DI0 and DI1, respectively.
+
+example:
+
+ipu: ipu@18000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-ipu";
+ reg = <0x18000000 0x080000000>;
+ interrupts = <11 10>;
+ resets = <&src 2>;
+
+ ipu_di0: port@2 {
+ reg = <2>;
+
+ ipu_di0_disp0: endpoint {
+ remote-endpoint = <&display_in>;
+ };
+ };
+};
+
+Freescale i.MX PRE (Prefetch Resolve Engine)
+============================================
+
+Required properties:
+- compatible: should be "fsl,imx6qp-pre"
+- reg: should be register base and length as documented in the
+ datasheet
+- clocks : phandle to the PRE axi clock input, as described
+ in Documentation/devicetree/bindings/clock/clock-bindings.txt and
+ Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
+- clock-names: should be "axi"
+- interrupts: should contain the PRE interrupt
+- fsl,iram: phandle pointing to the mmio-sram device node, that should be
+ used for the PRE SRAM double buffer.
+
+example:
+
+pre@21c8000 {
+ compatible = "fsl,imx6qp-pre";
+ reg = <0x021c8000 0x1000>;
+ interrupts = <GIC_SPI 90 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&clks IMX6QDL_CLK_PRE0>;
+ clock-names = "axi";
+ fsl,iram = <&ocram2>;
+};
+
+Freescale i.MX PRG (Prefetch Resolve Gasket)
+============================================
+
+Required properties:
+- compatible: should be "fsl,imx6qp-prg"
+- reg: should be register base and length as documented in the
+ datasheet
+- clocks : phandles to the PRG ipg and axi clock inputs, as described
+ in Documentation/devicetree/bindings/clock/clock-bindings.txt and
+ Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
+- clock-names: should be "ipg" and "axi"
+- fsl,pres: phandles to the PRE units attached to this PRG, with the fixed
+ PRE as the first entry and the muxable PREs following.
+
+example:
+
+prg@21cc000 {
+ compatible = "fsl,imx6qp-prg";
+ reg = <0x021cc000 0x1000>;
+ clocks = <&clks IMX6QDL_CLK_PRG0_APB>,
+ <&clks IMX6QDL_CLK_PRG0_AXI>;
+ clock-names = "ipg", "axi";
+ fsl,pres = <&pre1>, <&pre2>, <&pre3>;
+};
+
+Parallel display support
+========================
+
+Required properties:
+- compatible: Should be "fsl,imx-parallel-display"
+Optional properties:
+- interface-pix-fmt: How this display is connected to the
+ display interface. Currently supported types: "rgb24", "rgb565", "bgr666"
+ and "lvds666".
+- edid: verbatim EDID data block describing attached display.
+- ddc: phandle describing the i2c bus handling the display data
+ channel
+- port@[0-1]: Port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/media/video-interfaces.txt.
+ Port 0 is the input port connected to the IPU display interface,
+ port 1 is the output port connected to a panel.
+
+example:
+
+disp0 {
+ compatible = "fsl,imx-parallel-display";
+ edid = [edid-data];
+ interface-pix-fmt = "rgb24";
+
+ port@0 {
+ reg = <0>;
+
+ display_in: endpoint {
+ remote-endpoint = <&ipu_di0_disp0>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ display_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+};
+
+panel {
+ ...
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&display_out>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/display/imx/hdmi.txt b/Documentation/devicetree/bindings/display/imx/hdmi.txt
new file mode 100644
index 000000000..6d021e71c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/hdmi.txt
@@ -0,0 +1,65 @@
+Freescale i.MX6 DWC HDMI TX Encoder
+===================================
+
+The HDMI transmitter is a Synopsys DesignWare HDMI 1.4 TX controller IP
+with a companion PHY IP.
+
+These DT bindings follow the Synopsys DWC HDMI TX bindings defined in
+Documentation/devicetree/bindings/display/bridge/dw_hdmi.txt with the
+following device-specific properties.
+
+
+Required properties:
+
+- compatible : Shall be one of "fsl,imx6q-hdmi" or "fsl,imx6dl-hdmi".
+- reg: See dw_hdmi.txt.
+- interrupts: HDMI interrupt number
+- clocks: See dw_hdmi.txt.
+- clock-names: Shall contain "iahb" and "isfr" as defined in dw_hdmi.txt.
+- ports: See dw_hdmi.txt. The DWC HDMI shall have between one and four ports,
+ numbered 0 to 3, corresponding to the four inputs of the HDMI multiplexer.
+ Each port shall have a single endpoint.
+- gpr : Shall contain a phandle to the iomuxc-gpr region containing the HDMI
+ multiplexer control register.
+
+Optional properties
+
+- ddc-i2c-bus: The HDMI DDC bus can be connected to either a system I2C master
+ or the functionally-reduced I2C master contained in the DWC HDMI. When
+ connected to a system I2C master this property contains a phandle to that
+ I2C master controller.
+
+
+Example:
+
+ gpr: iomuxc-gpr@20e0000 {
+ /* ... */
+ };
+
+ hdmi: hdmi@120000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx6q-hdmi";
+ reg = <0x00120000 0x9000>;
+ interrupts = <0 115 0x04>;
+ gpr = <&gpr>;
+ clocks = <&clks 123>, <&clks 124>;
+ clock-names = "iahb", "isfr";
+ ddc-i2c-bus = <&i2c2>;
+
+ port@0 {
+ reg = <0>;
+
+ hdmi_mux_0: endpoint {
+ remote-endpoint = <&ipu1_di0_hdmi>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+
+ hdmi_mux_1: endpoint {
+ remote-endpoint = <&ipu1_di1_hdmi>;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/display/imx/ldb.txt b/Documentation/devicetree/bindings/display/imx/ldb.txt
new file mode 100644
index 000000000..8e6e7d797
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/ldb.txt
@@ -0,0 +1,147 @@
+Device-Tree bindings for LVDS Display Bridge (ldb)
+
+LVDS Display Bridge
+===================
+
+The LVDS Display Bridge device tree node contains up to two lvds-channel
+nodes describing each of the two LVDS encoder channels of the bridge.
+
+Required properties:
+ - #address-cells : should be <1>
+ - #size-cells : should be <0>
+ - compatible : should be "fsl,imx53-ldb" or "fsl,imx6q-ldb".
+ Both LDB versions are similar, but i.MX6 has an additional
+ multiplexer in the front to select any of the four IPU display
+ interfaces as input for each LVDS channel.
+ - gpr : should be <&gpr> on i.MX53 and i.MX6q.
+ The phandle points to the iomuxc-gpr region containing the LVDS
+ control register.
+- clocks, clock-names : phandles to the LDB divider and selector clocks and to
+ the display interface selector clocks, as described in
+ Documentation/devicetree/bindings/clock/clock-bindings.txt
+ The following clocks are expected on i.MX53:
+ "di0_pll" - LDB LVDS channel 0 mux
+ "di1_pll" - LDB LVDS channel 1 mux
+ "di0" - LDB LVDS channel 0 gate
+ "di1" - LDB LVDS channel 1 gate
+ "di0_sel" - IPU1 DI0 mux
+ "di1_sel" - IPU1 DI1 mux
+ On i.MX6q the following additional clocks are needed:
+ "di2_sel" - IPU2 DI0 mux
+ "di3_sel" - IPU2 DI1 mux
+ The needed clock numbers for each are documented in
+ Documentation/devicetree/bindings/clock/imx5-clock.yaml, and in
+ Documentation/devicetree/bindings/clock/imx6q-clock.yaml.
+
+Optional properties:
+ - pinctrl-names : should be "default" on i.MX53, not used on i.MX6q
+ - pinctrl-0 : a phandle pointing to LVDS pin settings on i.MX53,
+ not used on i.MX6q
+ - fsl,dual-channel : boolean. if it exists, only LVDS channel 0 should
+ be configured - one input will be distributed on both outputs in dual
+ channel mode
+
+LVDS Channel
+============
+
+Each LVDS Channel has to contain either an of graph link to a panel device node
+or a display-timings node that describes the video timings for the connected
+LVDS display as well as the fsl,data-mapping and fsl,data-width properties.
+
+Required properties:
+ - reg : should be <0> or <1>
+ - port: Input and output port nodes with endpoint definitions as defined in
+ Documentation/devicetree/bindings/graph.txt.
+ On i.MX5, the internal two-input-multiplexer is used. Due to hardware
+ limitations, only one input port (port@[0,1]) can be used for each channel
+ (lvds-channel@[0,1], respectively).
+ On i.MX6, there should be four input ports (port@[0-3]) that correspond
+ to the four LVDS multiplexer inputs.
+ A single output port (port@2 on i.MX5, port@4 on i.MX6) must be connected
+ to a panel input port. Optionally, the output port can be left out if
+ display-timings are used instead.
+
+Optional properties (required if display-timings are used):
+ - ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
+ - display-timings : A node that describes the display timings as defined in
+ Documentation/devicetree/bindings/display/panel/display-timing.txt.
+ - fsl,data-mapping : should be "spwg" or "jeida"
+ This describes how the color bits are laid out in the
+ serialized LVDS signal.
+ - fsl,data-width : should be <18> or <24>
+
+example:
+
+gpr: iomuxc-gpr@53fa8000 {
+ /* ... */
+};
+
+ldb: ldb@53fa8008 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "fsl,imx53-ldb";
+ gpr = <&gpr>;
+ clocks = <&clks IMX5_CLK_LDB_DI0_SEL>,
+ <&clks IMX5_CLK_LDB_DI1_SEL>,
+ <&clks IMX5_CLK_IPU_DI0_SEL>,
+ <&clks IMX5_CLK_IPU_DI1_SEL>,
+ <&clks IMX5_CLK_LDB_DI0_GATE>,
+ <&clks IMX5_CLK_LDB_DI1_GATE>;
+ clock-names = "di0_pll", "di1_pll",
+ "di0_sel", "di1_sel",
+ "di0", "di1";
+
+ /* Using an of-graph endpoint link to connect the panel */
+ lvds-channel@0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ lvds0_in: endpoint {
+ remote-endpoint = <&ipu_di0_lvds0>;
+ };
+ };
+
+ port@2 {
+ reg = <2>;
+
+ lvds0_out: endpoint {
+ remote-endpoint = <&panel_in>;
+ };
+ };
+ };
+
+ /* Using display-timings and fsl,data-mapping/width instead */
+ lvds-channel@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <1>;
+ fsl,data-mapping = "spwg";
+ fsl,data-width = <24>;
+
+ display-timings {
+ /* ... */
+ };
+
+ port@1 {
+ reg = <1>;
+
+ lvds1_in: endpoint {
+ remote-endpoint = <&ipu_di1_lvds1>;
+ };
+ };
+ };
+};
+
+panel: lvds-panel {
+ /* ... */
+
+ port {
+ panel_in: endpoint {
+ remote-endpoint = <&lvds0_out>;
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
new file mode 100644
index 000000000..f1f25aa79
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/imx/nxp,imx8mq-dcss.yaml
@@ -0,0 +1,108 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 NXP
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/imx/nxp,imx8mq-dcss.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: iMX8MQ Display Controller Subsystem (DCSS)
+
+maintainers:
+ - Laurentiu Palcu <laurentiu.palcu@nxp.com>
+
+description:
+
+ The DCSS (display controller sub system) is used to source up to three
+ display buffers, compose them, and drive a display using HDMI 2.0a(with HDCP
+ 2.2) or MIPI-DSI. The DCSS is intended to support up to 4kp60 displays. HDR10
+ image processing capabilities are included to provide a solution capable of
+ driving next generation high dynamic range displays.
+
+properties:
+ compatible:
+ const: nxp,imx8mq-dcss
+
+ reg:
+ items:
+ - description: DCSS base address and size, up to IRQ steer start
+ - description: DCSS BLKCTL base address and size
+
+ interrupts:
+ items:
+ - description: Context loader completion and error interrupt
+ - description: DTG interrupt used to signal context loader trigger time
+ - description: DTG interrupt for Vblank
+
+ interrupt-names:
+ items:
+ - const: ctxld
+ - const: ctxld_kick
+ - const: vblank
+
+ clocks:
+ items:
+ - description: Display APB clock for all peripheral PIO access interfaces
+ - description: Display AXI clock needed by DPR, Scaler, RTRAM_CTRL
+ - description: RTRAM clock
+ - description: Pixel clock, can be driven either by HDMI phy clock or MIPI
+ - description: DTRC clock, needed by video decompressor
+
+ clock-names:
+ items:
+ - const: apb
+ - const: axi
+ - const: rtrm
+ - const: pix
+ - const: dtrc
+
+ assigned-clocks:
+ items:
+ - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_AXI_ROOT
+ - description: Phandle and clock specifier of IMX8MQ_CLK_DISP_RTRM
+ - description: Phandle and clock specifier of either IMX8MQ_VIDEO2_PLL1_REF_SEL or
+ IMX8MQ_VIDEO_PLL1_REF_SEL
+
+ assigned-clock-parents:
+ items:
+ - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M
+ - description: Phandle and clock specifier of IMX8MQ_SYS1_PLL_800M
+ - description: Phandle and clock specifier of IMX8MQ_CLK_27M
+
+ assigned-clock-rates:
+ items:
+ - description: Must be 800 MHz
+ - description: Must be 400 MHz
+
+ port:
+ type: object
+ description:
+ A port node pointing to the input port of a HDMI/DP or MIPI display bridge.
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8mq-clock.h>
+ dcss: display-controller@32e00000 {
+ compatible = "nxp,imx8mq-dcss";
+ reg = <0x32e00000 0x2d000>, <0x32e2f000 0x1000>;
+ interrupts = <6>, <8>, <9>;
+ interrupt-names = "ctxld", "ctxld_kick", "vblank";
+ interrupt-parent = <&irqsteer>;
+ clocks = <&clk IMX8MQ_CLK_DISP_APB_ROOT>, <&clk IMX8MQ_CLK_DISP_AXI_ROOT>,
+ <&clk IMX8MQ_CLK_DISP_RTRM_ROOT>, <&clk IMX8MQ_VIDEO2_PLL_OUT>,
+ <&clk IMX8MQ_CLK_DISP_DTRC>;
+ clock-names = "apb", "axi", "rtrm", "pix", "dtrc";
+ assigned-clocks = <&clk IMX8MQ_CLK_DISP_AXI>, <&clk IMX8MQ_CLK_DISP_RTRM>,
+ <&clk IMX8MQ_VIDEO2_PLL1_REF_SEL>;
+ assigned-clock-parents = <&clk IMX8MQ_SYS1_PLL_800M>, <&clk IMX8MQ_SYS1_PLL_800M>,
+ <&clk IMX8MQ_CLK_27M>;
+ assigned-clock-rates = <800000000>,
+ <400000000>;
+ port {
+ dcss_out: endpoint {
+ remote-endpoint = <&hdmi_in>;
+ };
+ };
+ };
+