Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 150 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt
new file mode 100644
index 000000000..1af0ff102
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/msm/gpu.txt
@@ -0,0 +1,150 @@
+Qualcomm adreno/snapdragon GPU
+
+Required properties:
+- compatible: "qcom,adreno-XYZ.W", "qcom,adreno" or
+	      "amd,imageon-XYZ.W", "amd,imageon"
+    for example: "qcom,adreno-306.0", "qcom,adreno"
+  Note that you need to list the less specific "qcom,adreno" (since this
+  is what the device is matched on), in addition to the more specific
+  with the chip-id.
+  If "amd,imageon" is used, there should be no top level msm device.
+- reg: Physical base address and length of the controller's registers.
+- interrupts: The interrupt signal from the gpu.
+- clocks: device clocks (if applicable)
+  See ../clocks/clock-bindings.txt for details.
+- clock-names: the following clocks are required by a3xx, a4xx and a5xx
+  cores:
+  * "core"
+  * "iface"
+  * "mem_iface"
+  For GMU attached devices the GPU clocks are not used and are not required. The
+  following devices should not list clocks:
+   - qcom,adreno-630.2
+- iommus: optional phandle to an adreno iommu instance
+- operating-points-v2: optional phandle to the OPP operating points
+- interconnects: optional phandle to an interconnect provider.  See
+  ../interconnect/interconnect.txt for details. Some A3xx and all A4xx platforms
+  will have two paths; all others will have one path.
+- interconnect-names: The names of the interconnect paths that correspond to the
+  interconnects property. Values must be gfx-mem and ocmem.
+- qcom,gmu: For GMU attached devices a phandle to the GMU device that will
+  control the power for the GPU. Applicable targets:
+    - qcom,adreno-630.2
+- zap-shader: For a5xx and a6xx devices this node contains a memory-region that
+  points to reserved memory to store the zap shader that can be used to help
+  bring the GPU out of secure mode.
+- firmware-name: optional property of the 'zap-shader' node, listing the
+  relative path of the device specific zap firmware.
+- sram: phandle to the On Chip Memory (OCMEM) that's present on some a3xx and
+        a4xx Snapdragon SoCs. See
+        Documentation/devicetree/bindings/sram/qcom,ocmem.yaml.
+
+Example 3xx/4xx:
+
+/ {
+	...
+
+	gpu: adreno@fdb00000 {
+		compatible = "qcom,adreno-330.2",
+		             "qcom,adreno";
+		reg = <0xfdb00000 0x10000>;
+		reg-names = "kgsl_3d0_reg_memory";
+		interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-names = "kgsl_3d0_irq";
+		clock-names = "core",
+		              "iface",
+		              "mem_iface";
+		clocks = <&mmcc OXILI_GFX3D_CLK>,
+		         <&mmcc OXILICX_AHB_CLK>,
+		         <&mmcc OXILICX_AXI_CLK>;
+		sram = <&gpu_sram>;
+		power-domains = <&mmcc OXILICX_GDSC>;
+		operating-points-v2 = <&gpu_opp_table>;
+		iommus = <&gpu_iommu 0>;
+	};
+
+	gpu_sram: ocmem@fdd00000 {
+		compatible = "qcom,msm8974-ocmem";
+
+		reg = <0xfdd00000 0x2000>,
+		      <0xfec00000 0x180000>;
+		reg-names = "ctrl",
+		            "mem";
+
+		clocks = <&rpmcc RPM_SMD_OCMEMGX_CLK>,
+		         <&mmcc OCMEMCX_OCMEMNOC_CLK>;
+		clock-names = "core",
+		              "iface";
+
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		gpu_sram: gpu-sram@0 {
+			reg = <0x0 0x100000>;
+			ranges = <0 0 0xfec00000 0x100000>;
+		};
+	};
+};
+
+Example a6xx (with GMU):
+
+/ {
+	...
+
+	gpu@5000000 {
+		compatible = "qcom,adreno-630.2", "qcom,adreno";
+		#stream-id-cells = <16>;
+
+		reg = <0x5000000 0x40000>, <0x509e000 0x10>;
+		reg-names = "kgsl_3d0_reg_memory", "cx_mem";
+
+		/*
+		 * Look ma, no clocks! The GPU clocks and power are
+		 * controlled entirely by the GMU
+		 */
+
+		interrupts = <GIC_SPI 300 IRQ_TYPE_LEVEL_HIGH>;
+
+		iommus = <&adreno_smmu 0>;
+
+		operating-points-v2 = <&gpu_opp_table>;
+
+		interconnects = <&rsc_hlos MASTER_GFX3D &rsc_hlos SLAVE_EBI1>;
+		interconnect-names = "gfx-mem";
+
+		gpu_opp_table: opp-table {
+			compatible = "operating-points-v2";
+
+			opp-430000000 {
+				opp-hz = /bits/ 64 <430000000>;
+				opp-level = <RPMH_REGULATOR_LEVEL_SVS_L1>;
+				opp-peak-kBps = <5412000>;
+			};
+
+			opp-355000000 {
+				opp-hz = /bits/ 64 <355000000>;
+				opp-level = <RPMH_REGULATOR_LEVEL_SVS>;
+				opp-peak-kBps = <3072000>;
+			};
+
+			opp-267000000 {
+				opp-hz = /bits/ 64 <267000000>;
+				opp-level = <RPMH_REGULATOR_LEVEL_LOW_SVS>;
+				opp-peak-kBps = <3072000>;
+			};
+
+			opp-180000000 {
+				opp-hz = /bits/ 64 <180000000>;
+				opp-level = <RPMH_REGULATOR_LEVEL_MIN_SVS>;
+				opp-peak-kBps = <1804000>;
+			};
+		};
+
+		qcom,gmu = <&gmu>;
+
+		zap-shader {
+			memory-region = <&zap_shader_region>;
+			firmware-name = "qcom/LENOVO/81JL/qcdxkmsuc850.mbn"
+		};
+	};
+};