Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 47 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/dma/k3dma.txt b/Documentation/devicetree/bindings/dma/k3dma.txt
new file mode 100644
index 000000000..10a2f15b0
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/k3dma.txt
@@ -0,0 +1,47 @@
+* Hisilicon K3 DMA controller
+
+See dma.txt first
+
+Required properties:
+- compatible: Must be one of
+-              "hisilicon,k3-dma-1.0"
+-              "hisilicon,hisi-pcm-asp-dma-1.0"
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain one interrupt shared by all channel
+- #dma-cells: see dma.txt, should be 1, para number
+- dma-channels: physical channels supported
+- dma-requests: virtual channels supported, each virtual channel
+		have specific request line
+- clocks: clock required
+
+Example:
+
+Controller:
+		dma0: dma@fcd02000 {
+			compatible = "hisilicon,k3-dma-1.0";
+			reg = <0xfcd02000 0x1000>;
+			#dma-cells = <1>;
+			dma-channels = <16>;
+			dma-requests = <27>;
+			interrupts = <0 12 4>;
+			clocks = <&pclk>;
+		};
+
+Client:
+Use specific request line passing from dmax
+For example, i2c0 read channel request line is 18, while write channel use 19
+
+		i2c0: i2c@fcb08000 {
+			compatible = "snps,designware-i2c";
+			dmas =	<&dma0 18          /* read channel */
+				 &dma0 19>;        /* write channel */
+			dma-names = "rx", "tx";
+		};
+
+		i2c1: i2c@fcb09000 {
+			compatible = "snps,designware-i2c";
+			dmas =	<&dma0 20          /* read channel */
+				 &dma0 21>;        /* write channel */
+			dma-names = "rx", "tx";
+		};
+