Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 39 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
new file mode 100644
index 000000000..b2033fc3a
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-aspeed.txt
@@ -0,0 +1,39 @@
+Aspeed GPIO controller Device Tree Bindings
+-------------------------------------------
+
+Required properties:
+- compatible		: Either "aspeed,ast2400-gpio", "aspeed,ast2500-gpio",
+					or "aspeed,ast2600-gpio".
+
+- #gpio-cells 		: Should be two
+			  - First cell is the GPIO line number
+			  - Second cell is used to specify optional
+			    parameters (unused)
+
+- reg			: Address and length of the register set for the device
+- gpio-controller	: Marks the device node as a GPIO controller.
+- interrupts		: Interrupt specifier (see interrupt bindings for
+			  details)
+- interrupt-controller	: Mark the GPIO controller as an interrupt-controller
+
+Optional properties:
+
+- clocks		: A phandle to the clock to use for debounce timings
+- ngpios		: Number of GPIOs controlled by this controller. Should	be set
+				  when there are multiple GPIO controllers on a SoC (ast2600).
+
+The gpio and interrupt properties are further described in their respective
+bindings documentation:
+
+- Documentation/devicetree/bindings/gpio/gpio.txt
+- Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+  Example:
+	gpio@1e780000 {
+		#gpio-cells = <2>;
+		compatible = "aspeed,ast2400-gpio";
+		gpio-controller;
+		interrupts = <20>;
+		reg = <0x1e780000 0x1000>;
+		interrupt-controller;
+	};