Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 50 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/gpio/gpio-atlas7.txt b/Documentation/devicetree/bindings/gpio/gpio-atlas7.txt
new file mode 100644
index 000000000..d7e123fc9
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-atlas7.txt
@@ -0,0 +1,50 @@
+CSR SiRFatlas7 GPIO controller bindings
+
+Required properties:
+- compatible	: "sirf,atlas7-gpio"
+- reg		: Address range of the pinctrl registers
+- interrupts	: Interrupts used by every GPIO group
+- gpio-banks	: How many gpio banks on this controller
+- gpio-controller : Indicates this device is a GPIO controller
+- interrupt-controller  : Marks the device node as an interrupt controller
+
+The GPIO controller also acts as an interrupt controller. It uses the default
+two cells specifier as described in Documentation/devicetree/bindings/
+interrupt-controller/interrupts.txt.
+
+Example:
+
+	gpio_0: gpio_mediam@17040000 {
+		compatible = "sirf,atlas7-gpio";
+		reg = <0x17040000 0x1000>;
+		interrupts = <0 13 0>, <0 14 0>;
+
+		#gpio-cells = <2>;
+		#interrupt-cells = <2>;
+
+		gpio-controller;
+		interrupt-controller;
+
+		gpio-banks = <2>;
+		gpio-ranges = <&pinctrl 0 0 0>,
+				<&pinctrl 32 0 0>;
+		gpio-ranges-group-names = "lvds_gpio_grp",
+					"uart_nand_gpio_grp";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led1 {
+			gpios = <&gpio_1 15 0>;
+			...
+		};
+
+		led2 {
+			gpios = <&gpio_2 34 0>;
+			...
+		};
+	};
+
+Please refer to gpio.txt in this directory for details of the common
+gpio properties used by devices.