Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

10 files changed, 557 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
new file mode 100644
index 000000000..4fcbfd93e
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adis16240.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adis16240.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ADIS16240 Programmable Impact Sensor and Recorder driver
+
+maintainers:
+  - Alexandru Ardelean <alexandru.ardelean@analog.com>
+
+description: |
+  ADIS16240 Programmable Impact Sensor and Recorder driver that supports
+  SPI interface.
+    https://www.analog.com/en/products/adis16240.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adis16240
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  spi-max-frequency: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a SPI device node */
+        accelerometer@0 {
+            compatible = "adi,adis16240";
+            reg = <0>;
+            spi-max-frequency = <2500000>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
new file mode 100644
index 000000000..11d32a288
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl345.yaml
@@ -0,0 +1,80 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl345.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers
+
+maintainers:
+  - Michael Hennerich <michael.hennerich@analog.com>
+
+description: |
+  Analog Devices ADXL345/ADXL375 3-Axis Digital Accelerometers that supports
+  both I2C & SPI interfaces.
+    https://www.analog.com/en/products/mems/accelerometers/adxl345.html
+    https://www.analog.com/en/products/sensors-mems/accelerometers/adxl375.html
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - const: adi,adxl346
+          - const: adi,adxl345
+      - enum:
+          - adi,adxl345
+          - adi,adxl375
+
+  reg:
+    maxItems: 1
+
+  spi-cpha: true
+
+  spi-cpol: true
+
+  spi-max-frequency: true
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a I2C device node */
+        accelerometer@2a {
+            compatible = "adi,adxl345";
+            reg = <0x53>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    spi0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* Example for a SPI device node */
+        accelerometer@0 {
+            compatible = "adi,adxl345";
+            reg = <0>;
+            spi-max-frequency = <5000000>;
+            spi-cpol;
+            spi-cpha;
+            interrupt-parent = <&gpio0>;
+            interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
new file mode 100644
index 000000000..38b59b645
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/adi,adxl372.yaml
@@ -0,0 +1,67 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/adi,adxl372.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer
+
+maintainers:
+  - Stefan Popa <stefan.popa@analog.com>
+
+description: |
+  Analog Devices ADXL372 3-Axis, +/-(200g) Digital Accelerometer that supports
+  both I2C & SPI interfaces
+    https://www.analog.com/en/products/adxl372.html
+
+properties:
+  compatible:
+    enum:
+      - adi,adxl372
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  spi-max-frequency: true
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+        #include <dt-bindings/gpio/gpio.h>
+        #include <dt-bindings/interrupt-controller/irq.h>
+        i2c0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                /* Example for a I2C device node */
+                accelerometer@53 {
+                        compatible = "adi,adxl372";
+                        reg = <0x53>;
+                        interrupt-parent = <&gpio>;
+                        interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+                };
+        };
+  - |
+        #include <dt-bindings/gpio/gpio.h>
+        #include <dt-bindings/interrupt-controller/irq.h>
+        spi0 {
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                accelerometer@0 {
+                        compatible = "adi,adxl372";
+                        reg = <0>;
+                        spi-max-frequency = <1000000>;
+                        interrupt-parent = <&gpio>;
+                        interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+                };
+        };
diff --git a/Documentation/devicetree/bindings/iio/accel/bma180.txt b/Documentation/devicetree/bindings/iio/accel/bma180.txt
new file mode 100644
index 000000000..33da4a6fd
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/bma180.txt
@@ -0,0 +1,35 @@
+* Bosch BMA023 / BMA150/ BMA180 / BMA25x / SMB380 triaxial acceleration sensor
+
+https://media.digikey.com/pdf/Data%20Sheets/Bosch/BMA150.pdf
+http://omapworld.com/BMA180_111_1002839.pdf
+http://ae-bst.resource.bosch.com/media/products/dokumente/bma250/bst-bma250-ds002-05.pdf
+
+Required properties:
+
+  - compatible : should be one of:
+    "bosch,bma023"
+    "bosch,bma150"
+    "bosch,bma180"
+    "bosch,bma250"
+    "bosch,bma254"
+    "bosch,smb380"
+  - reg : the I2C address of the sensor
+  - vdd-supply : regulator phandle connected to the VDD pin
+  - vddio-supply : regulator phandle connected to the VDDIO pin
+
+Optional properties:
+
+  - interrupts : interrupt mapping for GPIO IRQ, it should by configured with
+		flags IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING
+		For the bma250 the first interrupt listed must be the one
+		connected to the INT1 pin, the second (optional) interrupt
+		listed must be the one connected to the INT2 pin.
+
+Example:
+
+bma180@40 {
+	compatible = "bosch,bma180";
+	reg = <0x40>;
+	interrupt-parent = <&gpio6>;
+	interrupts = <18 (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_EDGE_RISING)>;
+};
diff --git a/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
new file mode 100644
index 000000000..8723a3362
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/bosch,bma400.yaml
@@ -0,0 +1,56 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/bosch,bma400.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Bosch BMA400 triaxial acceleration sensor
+
+maintainers:
+  - Dan Robertson <dan@dlrobertson.com>
+
+description: |
+  Acceleration and temperature iio sensors with an i2c interface
+
+  Specifications about the sensor can be found at:
+    https://ae-bst.resource.bosch.com/media/_tech/media/datasheets/BST-BMA400-DS000.pdf
+
+properties:
+  compatible:
+    enum:
+      - bosch,bma400
+
+  reg:
+    maxItems: 1
+
+  vdd-supply:
+    description: phandle to the regulator that provides power to the accelerometer
+
+  vddio-supply:
+    description: phandle to the regulator that provides power to the sensor's IO
+
+  interrupts:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      accelerometer@14 {
+        compatible = "bosch,bma400";
+        reg = <0x14>;
+        vdd-supply = <&vdd>;
+        vddio-supply = <&vddio>;
+        interrupt-parent = <&gpio0>;
+        interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/accel/dmard06.txt b/Documentation/devicetree/bindings/iio/accel/dmard06.txt
new file mode 100644
index 000000000..ce105a12c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/dmard06.txt
@@ -0,0 +1,19 @@
+Device tree bindings for Domintech DMARD05, DMARD06, DMARD07 accelerometers
+
+Required properties:
+ - compatible		: Should be "domintech,dmard05"
+				 or "domintech,dmard06"
+				 or "domintech,dmard07"
+ - reg			: I2C address of the chip. Should be 0x1c
+
+Example:
+	&i2c1 {
+		/* ... */
+
+		accelerometer@1c {
+			compatible = "domintech,dmard06";
+			reg = <0x1c>;
+		};
+
+		/* ... */
+	};
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt
new file mode 100644
index 000000000..ce950e162
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxcjk1013.txt
@@ -0,0 +1,24 @@
+Kionix KXCJK-1013 Accelerometer device tree bindings
+
+Required properties:
+
+- compatible: Must be one of:
+    "kionix,kxcjk1013"
+    "kionix,kxcj91008"
+    "kionix,kxtj21009"
+    "kionix,kxtf9"
+ - reg: i2c slave address
+
+Optional properties:
+
+  - mount-matrix: an optional 3x3 mounting rotation matrix
+
+Example:
+
+kxtf9@f {
+	compatible = "kionix,kxtf9";
+	reg = <0x0F>;
+	mount-matrix =	"0", "1", "0",
+			"1", "0", "0",
+			"0", "0", "1";
+};
diff --git a/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
new file mode 100644
index 000000000..390b87242
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/kionix,kxsd9.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/accel/kionix,kxsd9.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kionix KXSD9 Accelerometer
+
+maintainers:
+  - Jonathan Cameron <jic23@kernel.org>
+
+description: |
+  3 axis 12 bit accelerometer with +-8G range on all axes. Also has a
+  12 bit auxiliary ADC channel. Interface is either SPI or I2C.
+
+properties:
+  compatible:
+    const: kionix,kxsd9
+
+  reg:
+    maxItems: 1
+
+  vdd-supply: true
+  iovdd-supply: true
+
+  interrupts:
+    maxItems: 1
+
+  mount-matrix:
+    description: an optional 3x3 mounting rotation matrix.
+
+  spi-max-frequency: true
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        accel@18 {
+            compatible = "kionix,kxsd9";
+            reg = <0x18>;
+            iovdd-supply = <&iovdd>;
+            vdd-supply = <&vdd>;
+            interrupts = <57 IRQ_TYPE_EDGE_FALLING>;
+            mount-matrix = "-0.984807753012208", "0",  "-0.173648177666930",
+                           "0",                  "-1", "0",
+                           "-0.173648177666930", "0",  "0.984807753012208";
+        };
+    };
+  - |
+    # include <dt-bindings/interrupt-controller/irq.h>
+    spi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        accel@0 {
+            compatible = "kionix,kxsd9";
+            reg = <0>;
+            spi-max-frequency = <10000000>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/accel/lis302.txt b/Documentation/devicetree/bindings/iio/accel/lis302.txt
new file mode 100644
index 000000000..764e28ec1
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/lis302.txt
@@ -0,0 +1,119 @@
+LIS302 accelerometer devicetree bindings
+
+This device is matched via its bus drivers, and has a number of properties
+that apply in on the generic device (independent from the bus).
+
+
+Required properties for the SPI bindings:
+ - compatible: 		should be set to "st,lis3lv02d-spi"
+ - reg:			the chipselect index
+ - spi-max-frequency:	maximal bus speed, should be set to 1000000 unless
+			constrained by external circuitry
+ - interrupts:		the interrupt generated by the device
+
+Required properties for the I2C bindings:
+ - compatible:		should be set to "st,lis3lv02d"
+ - reg:			i2c slave address
+ - Vdd-supply:		The input supply for Vdd
+ - Vdd_IO-supply:	The input supply for Vdd_IO
+
+
+Optional properties for all bus drivers:
+
+ - st,click-single-{x,y,z}:	if present, tells the device to issue an
+				interrupt on single click events on the
+				x/y/z axis.
+ - st,click-double-{x,y,z}:	if present, tells the device to issue an
+				interrupt on double click events on the
+				x/y/z axis.
+ - st,click-thresh-{x,y,z}:	set the x/y/z axis threshold
+ - st,click-click-time-limit:	click time limit, from 0 to 127.5msec
+				with step of 0.5 msec
+ - st,click-latency:		click latency, from 0 to 255 msec with
+				step of 1 msec.
+ - st,click-window:		click window, from 0 to 255 msec with
+				step of 1 msec.
+ - st,irq{1,2}-disable:		disable IRQ 1/2
+ - st,irq{1,2}-ff-wu-1:		raise IRQ 1/2 on FF_WU_1 condition
+ - st,irq{1,2}-ff-wu-2:		raise IRQ 1/2 on FF_WU_2 condition
+ - st,irq{1,2}-data-ready:	raise IRQ 1/2 on data ready contition
+ - st,irq{1,2}-click:		raise IRQ 1/2 on click condition
+ - st,irq-open-drain:		consider IRQ lines open-drain
+ - st,irq-active-low:		make IRQ lines active low
+ - st,wu-duration-1:		duration register for Free-Fall/Wake-Up
+				interrupt 1
+ - st,wu-duration-2:		duration register for Free-Fall/Wake-Up
+				interrupt 2
+ - st,wakeup-{x,y,z}-{lo,hi}:	set wakeup condition on x/y/z axis for
+				upper/lower limit
+ - st,wakeup-threshold:		set wakeup threshold
+ - st,wakeup2-{x,y,z}-{lo,hi}:	set wakeup condition on x/y/z axis for
+				upper/lower limit for second wakeup
+				engine.
+ - st,wakeup2-threshold:	set wakeup threshold for second wakeup
+				engine.
+ - st,highpass-cutoff-hz=:	1, 2, 4 or 8 for 1Hz, 2Hz, 4Hz or 8Hz of
+				highpass cut-off frequency
+ - st,hipass{1,2}-disable:	disable highpass 1/2.
+ - st,default-rate=:		set the default rate
+ - st,axis-{x,y,z}=:		set the axis to map to the three coordinates.
+				Negative values can be used for inverted axis.
+ - st,{min,max}-limit-{x,y,z}	set the min/max limits for x/y/z axis
+				(used by self-test)
+
+
+Example for a SPI device node:
+
+	accelerometer@0 {
+		compatible = "st,lis302dl-spi";
+		reg = <0>;
+		spi-max-frequency = <1000000>;
+		interrupt-parent = <&gpio>;
+		interrupts = <104 0>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+	};
+
+Example for a I2C device node:
+
+	lis331dlh: accelerometer@18 {
+		compatible = "st,lis331dlh", "st,lis3lv02d";
+		reg = <0x18>;
+		Vdd-supply = <&lis3_reg>;
+		Vdd_IO-supply = <&lis3_reg>;
+
+		st,click-single-x;
+		st,click-single-y;
+		st,click-single-z;
+		st,click-thresh-x = <10>;
+		st,click-thresh-y = <10>;
+		st,click-thresh-z = <10>;
+		st,irq1-click;
+		st,irq2-click;
+		st,wakeup-x-lo;
+		st,wakeup-x-hi;
+		st,wakeup-y-lo;
+		st,wakeup-y-hi;
+		st,wakeup-z-lo;
+		st,wakeup-z-hi;
+		st,min-limit-x = <120>;
+		st,min-limit-y = <120>;
+		st,min-limit-z = <140>;
+		st,max-limit-x = <550>;
+		st,max-limit-y = <550>;
+		st,max-limit-z = <750>;
+	};
+
diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
new file mode 100644
index 000000000..e13239437
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/accel/mma8452.txt
@@ -0,0 +1,35 @@
+Freescale MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC or FXLS8471Q
+triaxial accelerometer
+
+Required properties:
+
+  - compatible: should contain one of
+    * "fsl,mma8451"
+    * "fsl,mma8452"
+    * "fsl,mma8453"
+    * "fsl,mma8652"
+    * "fsl,mma8653"
+    * "fsl,fxls8471"
+
+  - reg: the I2C address of the chip
+
+Optional properties:
+
+  - interrupts: interrupt mapping for GPIO IRQ
+
+  - interrupt-names: should contain "INT1" and/or "INT2", the accelerometer's
+		     interrupt line in use.
+
+  - vdd-supply: phandle to the regulator that provides vdd power to the accelerometer.
+
+  - vddio-supply: phandle to the regulator that provides vddio power to the accelerometer.
+
+Example:
+
+	mma8453fc@1d {
+		compatible = "fsl,mma8453";
+		reg = <0x1d>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <5 0>;
+		interrupt-names = "INT2";
+	};