Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

6 files changed, 208 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
new file mode 100644
index 000000000..be2be4b55
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/asc,dlhl60d.yaml
@@ -0,0 +1,53 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/asc,dlhl60d.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: All Sensors DLH series low voltage digital pressure sensors
+
+maintainers:
+  - Tomislav Denis <tomislav.denis@avl.com>
+
+description: |
+  Bindings for the All Sensors DLH series pressure sensors.
+
+  Specifications about the sensors can be found at:
+    https://www.allsensors.com/cad/DS-0355_Rev_B.PDF
+
+properties:
+  compatible:
+    enum:
+      - asc,dlhl60d
+      - asc,dlhl60g
+
+  reg:
+    description: I2C device address
+    maxItems: 1
+
+  interrupts:
+    description: interrupt mapping for EOC(data ready) pin
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c0 {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pressure@29 {
+            compatible = "asc,dlhl60d";
+            reg = <0x29>;
+            interrupt-parent = <&gpio0>;
+            interrupts = <10 IRQ_TYPE_EDGE_RISING>;
+        };
+    };
+...
diff --git a/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
new file mode 100644
index 000000000..49257f925
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/bmp085.yaml
@@ -0,0 +1,73 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/pressure/bmp085.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BMP085/BMP180/BMP280/BME280 pressure iio sensors
+
+maintainers:
+  - Andreas Klinger <ak@it-klinger.de>
+
+description: |
+  Pressure, temperature and humidity iio sensors with i2c and spi interfaces
+
+  Specifications about the sensor can be found at:
+    https://www.bosch-sensortec.com/bst/products/all_products/bmp180
+    https://www.bosch-sensortec.com/bst/products/all_products/bmp280
+    https://www.bosch-sensortec.com/bst/products/all_products/bme280
+
+properties:
+  compatible:
+    enum:
+      - bosch,bmp085
+      - bosch,bmp180
+      - bosch,bmp280
+      - bosch,bme280
+
+  reg:
+    maxItems: 1
+
+  vddd-supply:
+    description:
+      digital voltage regulator (see regulator/regulator.txt)
+
+  vdda-supply:
+    description:
+      analog voltage regulator (see regulator/regulator.txt)
+
+  reset-gpios:
+    description:
+      A GPIO line handling reset of the sensor. As the line is active low,
+      it should be marked GPIO_ACTIVE_LOW (see gpio/gpio.txt)
+    maxItems: 1
+
+  interrupts:
+    description:
+      interrupt mapping for IRQ (BMP085 only)
+    maxItems: 1
+
+required:
+  - compatible
+  - vddd-supply
+  - vdda-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    i2c0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+      pressure@77 {
+          compatible = "bosch,bmp085";
+          reg = <0x77>;
+          interrupt-parent = <&gpio0>;
+          interrupts = <25 IRQ_TYPE_EDGE_RISING>;
+          reset-gpios = <&gpio0 26 GPIO_ACTIVE_LOW>;
+          vddd-supply = <&foo>;
+          vdda-supply = <&bar>;
+      };
+    };
diff --git a/Documentation/devicetree/bindings/iio/pressure/hp03.txt b/Documentation/devicetree/bindings/iio/pressure/hp03.txt
new file mode 100644
index 000000000..831dbee7a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/hp03.txt
@@ -0,0 +1,17 @@
+HopeRF HP03 digital pressure/temperature sensors
+
+Required properties:
+- compatible: must be "hoperf,hp03"
+- xclr-gpio: must be device tree identifier of the XCLR pin.
+             The XCLR pin is a reset of the ADC in the chip,
+             it must be pulled HI before the conversion and
+             readout of the value from the ADC registers and
+             pulled LO afterward.
+
+Example:
+
+hp03@77 {
+	compatible = "hoperf,hp03";
+	reg = <0x77>;
+	xclr-gpio = <&portc 0 0x0>;
+};
diff --git a/Documentation/devicetree/bindings/iio/pressure/ms5611.txt b/Documentation/devicetree/bindings/iio/pressure/ms5611.txt
new file mode 100644
index 000000000..17bca866c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/ms5611.txt
@@ -0,0 +1,19 @@
+MEAS ms5611 family pressure sensors
+
+Pressure sensors from MEAS Switzerland with SPI and I2C bus interfaces.
+
+Required properties:
+- compatible: "meas,ms5611" or "meas,ms5607"
+- reg: the I2C address or SPI chip select the device will respond to
+
+Optional properties:
+- vdd-supply: an optional regulator that needs to be on to provide VDD
+  power to the sensor.
+
+Example:
+
+ms5607@77 {
+	compatible = "meas,ms5607";
+	reg = <0x77>;
+	vdd-supply = <&ldo_3v3_gnss>;
+};
diff --git a/Documentation/devicetree/bindings/iio/pressure/ms5637.txt b/Documentation/devicetree/bindings/iio/pressure/ms5637.txt
new file mode 100644
index 000000000..1f43ffa06
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/ms5637.txt
@@ -0,0 +1,17 @@
+* MS5637 - Measurement-Specialties MS5637, MS5805, MS5837 and MS8607 pressure & temperature sensor
+
+Required properties:
+
+	-compatible: should be one of the following
+		meas,ms5637
+		meas,ms5805
+		meas,ms5837
+		meas,ms8607-temppressure
+	-reg: I2C address of the sensor
+
+Example:
+
+ms5637@76 {
+	compatible = "meas,ms5637";
+	reg = <0x76>;
+};
diff --git a/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt b/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt
new file mode 100644
index 000000000..a36ab3e0c
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/pressure/zpa2326.txt
@@ -0,0 +1,29 @@
+Murata ZPA2326 pressure sensor
+
+Pressure sensor from Murata with SPI and I2C bus interfaces.
+
+Required properties:
+- compatible: "murata,zpa2326"
+- reg: the I2C address or SPI chip select the device will respond to
+
+Recommended properties for SPI bus usage:
+- spi-max-frequency: maximum SPI bus frequency as documented in
+  Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional properties:
+- vref-supply: an optional regulator that needs to be on to provide VREF
+  power to the sensor
+- vdd-supply: an optional regulator that needs to be on to provide VDD
+  power to the sensor
+- interrupts: interrupt mapping for IRQ as documented in
+  Documentation/devicetree/bindings/interrupt-controller/interrupts.txt
+
+Example:
+
+zpa2326@5c {
+	compatible = "murata,zpa2326";
+	reg = <0x5c>;
+	interrupt-parent = <&gpio>;
+	interrupts = <12>;
+	vdd-supply = <&ldo_1v8_gnss>;
+};