Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 97 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
new file mode 100644
index 000000000..b9a61c9f7
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/sifive,plic-1.0.0.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+# Copyright (C) 2020 SiFive, Inc.
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/sifive,plic-1.0.0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SiFive Platform-Level Interrupt Controller (PLIC)
+
+description:
+  SiFive SOCs include an implementation of the Platform-Level Interrupt Controller
+  (PLIC) high-level specification in the RISC-V Privileged Architecture
+  specification. The PLIC connects all external interrupts in the system to all
+  hart contexts in the system, via the external interrupt source in each hart.
+
+  A hart context is a privilege mode in a hardware execution thread. For example,
+  in an 4 core system with 2-way SMT, you have 8 harts and probably at least two
+  privilege modes per hart; machine mode and supervisor mode.
+
+  Each interrupt can be enabled on per-context basis. Any context can claim
+  a pending enabled interrupt and then release it once it has been handled.
+
+  Each interrupt has a configurable priority. Higher priority interrupts are
+  serviced first.  Each context can specify a priority threshold. Interrupts
+  with priority below this threshold will not cause the PLIC to raise its
+  interrupt line leading to the context.
+
+  While the PLIC supports both edge-triggered and level-triggered interrupts,
+  interrupt handlers are oblivious to this distinction and therefore it is not
+  specified in the PLIC device-tree binding.
+
+  While the RISC-V ISA doesn't specify a memory layout for the PLIC, the
+  "sifive,plic-1.0.0" device is a concrete implementation of the PLIC that
+  contains a specific memory layout, which is documented in chapter 8 of the
+  SiFive U5 Coreplex Series Manual <https://static.dev.sifive.com/U54-MC-RVCoreIP.pdf>.
+
+maintainers:
+  - Sagar Kadam <sagar.kadam@sifive.com>
+  - Paul Walmsley  <paul.walmsley@sifive.com>
+  - Palmer Dabbelt <palmer@dabbelt.com>
+
+properties:
+  compatible:
+    items:
+      - const: sifive,fu540-c000-plic
+      - const: sifive,plic-1.0.0
+
+  reg:
+    maxItems: 1
+
+  '#address-cells':
+    const: 0
+
+  '#interrupt-cells':
+    const: 1
+
+  interrupt-controller: true
+
+  interrupts-extended:
+    minItems: 1
+    description:
+      Specifies which contexts are connected to the PLIC, with "-1" specifying
+      that a context is not present. Each node pointed to should be a
+      riscv,cpu-intc node, which has a riscv node as parent.
+
+  riscv,ndev:
+    $ref: "/schemas/types.yaml#/definitions/uint32"
+    description:
+      Specifies how many external interrupts are supported by this controller.
+
+required:
+  - compatible
+  - '#address-cells'
+  - '#interrupt-cells'
+  - interrupt-controller
+  - reg
+  - interrupts-extended
+  - riscv,ndev
+
+additionalProperties: false
+
+examples:
+  - |
+    plic: interrupt-controller@c000000 {
+      #address-cells = <0>;
+      #interrupt-cells = <1>;
+      compatible = "sifive,fu540-c000-plic", "sifive,plic-1.0.0";
+      interrupt-controller;
+      interrupts-extended = <
+        &cpu0_intc 11
+        &cpu1_intc 11 &cpu1_intc 9
+        &cpu2_intc 11 &cpu2_intc 9
+        &cpu3_intc 11 &cpu3_intc 9
+        &cpu4_intc 11 &cpu4_intc 9>;
+      reg = <0xc000000 0x4000000>;
+      riscv,ndev = <10>;
+    };