summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/leds
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-27 10:05:51 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-27 10:05:51 +0000
commit5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch)
treea94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/devicetree/bindings/leds
parentInitial commit. (diff)
downloadlinux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.tar.xz
linux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.zip
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/devicetree/bindings/leds')
-rw-r--r--Documentation/devicetree/bindings/leds/ams,as3645a.txt85
-rw-r--r--Documentation/devicetree/bindings/leds/backlight/88pm860x.txt15
-rw-r--r--Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt33
-rw-r--r--Documentation/devicetree/bindings/leds/backlight/common.yaml36
-rw-r--r--Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml41
-rw-r--r--Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml46
-rw-r--r--Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml57
-rw-r--r--Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml142
-rw-r--r--Documentation/devicetree/bindings/leds/backlight/lp855x.txt72
-rw-r--r--Documentation/devicetree/bindings/leds/backlight/max8925-backlight.txt10
-rw-r--r--Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml104
-rw-r--r--Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml253
-rw-r--r--Documentation/devicetree/bindings/leds/backlight/sky81452-backlight.txt29
-rw-r--r--Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt27
-rw-r--r--Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.txt23
-rw-r--r--Documentation/devicetree/bindings/leds/common.txt1
-rw-r--r--Documentation/devicetree/bindings/leds/common.yaml227
-rw-r--r--Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml90
-rw-r--r--Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt14
-rw-r--r--Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt13
-rw-r--r--Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt29
-rw-r--r--Documentation/devicetree/bindings/leds/leds-aat1290.txt77
-rw-r--r--Documentation/devicetree/bindings/leds/leds-an30259a.txt55
-rw-r--r--Documentation/devicetree/bindings/leds/leds-aw2013.yaml90
-rw-r--r--Documentation/devicetree/bindings/leds/leds-bcm6328.txt319
-rw-r--r--Documentation/devicetree/bindings/leds/leds-bcm6358.txt145
-rw-r--r--Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml41
-rw-r--r--Documentation/devicetree/bindings/leds/leds-cpcap.txt29
-rw-r--r--Documentation/devicetree/bindings/leds/leds-cr0014114.txt66
-rw-r--r--Documentation/devicetree/bindings/leds/leds-el15203000.txt69
-rw-r--r--Documentation/devicetree/bindings/leds/leds-gpio.yaml85
-rw-r--r--Documentation/devicetree/bindings/leds/leds-is31fl319x.txt61
-rw-r--r--Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt52
-rw-r--r--Documentation/devicetree/bindings/leds/leds-ktd2692.txt50
-rw-r--r--Documentation/devicetree/bindings/leds/leds-lm3532.txt105
-rw-r--r--Documentation/devicetree/bindings/leds/leds-lm3601x.txt51
-rw-r--r--Documentation/devicetree/bindings/leds/leds-lm36274.txt85
-rw-r--r--Documentation/devicetree/bindings/leds/leds-lm3692x.txt65
-rw-r--r--Documentation/devicetree/bindings/leds/leds-lm3697.txt73
-rw-r--r--Documentation/devicetree/bindings/leds/leds-lp50xx.yaml138
-rw-r--r--Documentation/devicetree/bindings/leds/leds-lp55xx.yaml228
-rw-r--r--Documentation/devicetree/bindings/leds/leds-lp8860.txt50
-rw-r--r--Documentation/devicetree/bindings/leds/leds-lt3593.txt37
-rw-r--r--Documentation/devicetree/bindings/leds/leds-max77650.yaml54
-rw-r--r--Documentation/devicetree/bindings/leds/leds-mt6323.txt60
-rw-r--r--Documentation/devicetree/bindings/leds/leds-netxbig.txt92
-rw-r--r--Documentation/devicetree/bindings/leds/leds-ns2.txt35
-rw-r--r--Documentation/devicetree/bindings/leds/leds-pca9532.txt49
-rw-r--r--Documentation/devicetree/bindings/leds/leds-pca955x.txt89
-rw-r--r--Documentation/devicetree/bindings/leds/leds-pm8058.txt67
-rw-r--r--Documentation/devicetree/bindings/leds/leds-powernv.txt26
-rw-r--r--Documentation/devicetree/bindings/leds/leds-pwm.txt50
-rw-r--r--Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt43
-rw-r--r--Documentation/devicetree/bindings/leds/leds-sgm3140.yaml61
-rw-r--r--Documentation/devicetree/bindings/leds/leds-spi-byte.txt44
-rw-r--r--Documentation/devicetree/bindings/leds/leds-tlc591xx.txt40
-rw-r--r--Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt49
-rw-r--r--Documentation/devicetree/bindings/leds/pca963x.txt52
-rw-r--r--Documentation/devicetree/bindings/leds/register-bit-led.txt94
-rw-r--r--Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml54
-rw-r--r--Documentation/devicetree/bindings/leds/ti,tca6507.yaml134
-rw-r--r--Documentation/devicetree/bindings/leds/trigger-source.yaml26
62 files changed, 4437 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/leds/ams,as3645a.txt b/Documentation/devicetree/bindings/leds/ams,as3645a.txt
new file mode 100644
index 000000000..4af2987b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/ams,as3645a.txt
@@ -0,0 +1,85 @@
+Analog devices AS3645A device tree bindings
+
+The AS3645A flash LED controller can drive two LEDs, one high current
+flash LED and one indicator LED. The high current flash LED can be
+used in torch mode as well.
+
+Ranges below noted as [a, b] are closed ranges between a and b, i.e. a
+and b are included in the range.
+
+Please also see common.txt in the same directory.
+
+
+Required properties
+===================
+
+compatible : Must be "ams,as3645a".
+reg : The I2C address of the device. Typically 0x30.
+#address-cells : 1
+#size-cells : 0
+
+
+Required properties of the flash child node (0)
+===============================================
+
+reg: 0
+flash-timeout-us: Flash timeout in microseconds. The value must be in
+ the range [100000, 850000] and divisible by 50000.
+flash-max-microamp: Maximum flash current in microamperes. Has to be
+ in the range between [200000, 500000] and
+ divisible by 20000.
+led-max-microamp: Maximum torch (assist) current in microamperes. The
+ value must be in the range between [20000, 160000] and
+ divisible by 20000.
+ams,input-max-microamp: Maximum flash controller input current. The
+ value must be in the range [1250000, 2000000]
+ and divisible by 50000.
+
+
+Optional properties of the flash child node
+===========================================
+
+function : See Documentation/devicetree/bindings/leds/common.txt.
+color : See Documentation/devicetree/bindings/leds/common.txt.
+label : See Documentation/devicetree/bindings/leds/common.txt (deprecated).
+
+
+Required properties of the indicator child node (1)
+===================================================
+
+reg: 1
+led-max-microamp: Maximum indicator current. The allowed values are
+ 2500, 5000, 7500 and 10000.
+
+Optional properties of the indicator child node
+===============================================
+
+function : See Documentation/devicetree/bindings/leds/common.txt.
+color : See Documentation/devicetree/bindings/leds/common.txt.
+label : See Documentation/devicetree/bindings/leds/common.txt (deprecated).
+
+
+Example
+=======
+
+#include <dt-bindings/leds/common.h>
+
+ as3645a@30 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x30>;
+ compatible = "ams,as3645a";
+ led@0 {
+ reg = <0x0>;
+ flash-timeout-us = <150000>;
+ flash-max-microamp = <320000>;
+ led-max-microamp = <60000>;
+ ams,input-max-microamp = <1750000>;
+ function = LED_FUNCTION_FLASH;
+ };
+ led@1 {
+ reg = <0x1>;
+ led-max-microamp = <10000>;
+ function = LED_FUNCTION_INDICATOR;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/leds/backlight/88pm860x.txt b/Documentation/devicetree/bindings/leds/backlight/88pm860x.txt
new file mode 100644
index 000000000..261df2799
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/88pm860x.txt
@@ -0,0 +1,15 @@
+88pm860x-backlight bindings
+
+Optional properties:
+ - marvell,88pm860x-iset: Current supplies on backlight device.
+ - marvell,88pm860x-pwm: PWM frequency on backlight device.
+
+Example:
+
+ backlights {
+ backlight-0 {
+ marvell,88pm860x-iset = <4>;
+ marvell,88pm860x-pwm = <3>;
+ };
+ backlight-2 {
+ };
diff --git a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
new file mode 100644
index 000000000..230abdefd
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt
@@ -0,0 +1,33 @@
+Binding for ArcticSand arc2c0608 LED driver
+
+Required properties:
+- compatible: should be "arc,arc2c0608"
+- reg: slave address
+
+Optional properties:
+- default-brightness: brightness value on boot, value from: 0-4095
+- label: The name of the backlight device
+ See Documentation/devicetree/bindings/leds/common.txt
+- led-sources: List of enabled channels from 0 to 5.
+ See Documentation/devicetree/bindings/leds/common.txt
+
+- arc,led-config-0: setting for register ILED_CONFIG_0
+- arc,led-config-1: setting for register ILED_CONFIG_1
+- arc,dim-freq: PWM mode frequence setting (bits [3:0] used)
+- arc,comp-config: setting for register CONFIG_COMP
+- arc,filter-config: setting for register FILTER_CONFIG
+- arc,trim-config: setting for register IMAXTUNE
+
+Note: Optional properties not specified will default to values in IC EPROM
+
+Example:
+
+arc2c0608@30 {
+ compatible = "arc,arc2c0608";
+ reg = <0x30>;
+ default-brightness = <500>;
+ label = "lcd-backlight";
+ linux,default-trigger = "backlight";
+ led-sources = <0 1 2 5>;
+};
+
diff --git a/Documentation/devicetree/bindings/leds/backlight/common.yaml b/Documentation/devicetree/bindings/leds/backlight/common.yaml
new file mode 100644
index 000000000..bc817f77d
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/common.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common backlight properties
+
+maintainers:
+ - Lee Jones <lee.jones@linaro.org>
+ - Daniel Thompson <daniel.thompson@linaro.org>
+ - Jingoo Han <jingoohan1@gmail.com>
+
+description:
+ Backlight devices provide backlight for different types of graphical
+ displays. They are typically but not necessarily implemented using a white
+ LED powered by a boost converter.
+
+properties:
+ default-brightness:
+ description:
+ The default brightness that should be applied to the LED by the operating
+ system on start-up. The brightness should not exceed the brightness the
+ LED can provide.
+ $ref: /schemas/types.yaml#definitions/uint32
+
+ max-brightness:
+ description:
+ Normally the maximum brightness is determined by the hardware and this
+ property is not required. This property is used to put a software limit
+ on the brightness apart from what the driver says, as it could happen
+ that a LED can be made so bright that it gets damaged or causes damage
+ due to restrictions in a specific system, such as mounting conditions.
+ $ref: /schemas/types.yaml#definitions/uint32
+
+additionalProperties: true
diff --git a/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
new file mode 100644
index 000000000..75cc569b9
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/gpio-backlight.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/gpio-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: gpio-backlight bindings
+
+maintainers:
+ - Lee Jones <lee.jones@linaro.org>
+ - Daniel Thompson <daniel.thompson@linaro.org>
+ - Jingoo Han <jingoohan1@gmail.com>
+
+properties:
+ compatible:
+ const: gpio-backlight
+
+ gpios:
+ description: The gpio that is used for enabling/disabling the backlight.
+ maxItems: 1
+
+ default-on:
+ description: enable the backlight at boot.
+ type: boolean
+
+required:
+ - compatible
+ - gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ backlight {
+ compatible = "gpio-backlight";
+ gpios = <&gpio3 4 GPIO_ACTIVE_HIGH>;
+ default-on;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml
new file mode 100644
index 000000000..7a6ec1f8c
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/kinetic,ktd253.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/kinetic,ktd253.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Kinetic Technologies KTD253 one-wire backlight
+
+maintainers:
+ - Linus Walleij <linus.walleij@linaro.org>
+
+description: |
+ The Kinetic Technologies KTD253 is a white LED backlight that is
+ controlled by a single GPIO line. If you just turn on the backlight
+ it goes to maximum backlight then you can set the level of backlight
+ using pulses on the enable wire. This is sometimes referred to as
+ "expresswire".
+
+allOf:
+ - $ref: common.yaml#
+
+properties:
+ compatible:
+ const: kinetic,ktd253
+
+ enable-gpios:
+ description: GPIO to use to enable/disable and dim the backlight.
+ maxItems: 1
+
+ default-brightness: true
+ max-brightness: true
+
+required:
+ - compatible
+ - enable-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ backlight {
+ compatible = "kinetic,ktd253";
+ enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+ default-brightness = <13>;
+ };
diff --git a/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
new file mode 100644
index 000000000..625082bf3
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/led-backlight.yaml
@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/led-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: led-backlight bindings
+
+maintainers:
+ - Lee Jones <lee.jones@linaro.org>
+ - Daniel Thompson <daniel.thompson@linaro.org>
+ - Jingoo Han <jingoohan1@gmail.com>
+
+description:
+ This binding is used to describe a basic backlight device made of LEDs. It
+ can also be used to describe a backlight device controlled by the output of
+ a LED driver.
+
+properties:
+ compatible:
+ const: led-backlight
+
+ leds:
+ description: A list of LED nodes
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+
+ brightness-levels:
+ description:
+ Array of distinct brightness levels. The levels must be in the range
+ accepted by the underlying LED devices. This is used to translate a
+ backlight brightness level into a LED brightness level. If it is not
+ provided, the identity mapping is used.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ default-brightness-level:
+ description:
+ The default brightness level (index into the array defined by the
+ "brightness-levels" property).
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+required:
+ - compatible
+ - leds
+
+additionalProperties: false
+
+examples:
+ - |
+ backlight {
+ compatible = "led-backlight";
+
+ leds = <&led1>, <&led2>;
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
new file mode 100644
index 000000000..08fe5cf86
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/lm3630a-backlight.yaml
@@ -0,0 +1,142 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/lm3630a-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI LM3630A High-Efficiency Dual-String White LED
+
+maintainers:
+ - Lee Jones <lee.jones@linaro.org>
+ - Daniel Thompson <daniel.thompson@linaro.org>
+ - Jingoo Han <jingoohan1@gmail.com>
+
+description: |
+ The LM3630A is a current-mode boost converter which supplies the power and
+ controls the current in up to two strings of 10 LEDs per string.
+ https://www.ti.com/product/LM3630A
+
+properties:
+ compatible:
+ const: ti,lm3630a
+
+ reg:
+ maxItems: 1
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+ enable-gpios:
+ description: GPIO to use to enable/disable the backlight (HWEN pin).
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+ - '#address-cells'
+ - '#size-cells'
+
+patternProperties:
+ "^led@[01]$":
+ type: object
+ description: |
+ Properties for a string of connected LEDs.
+
+ properties:
+ reg:
+ description: |
+ The control bank that is used to program the two current sinks. The
+ LM3630A has two control banks (A and B) and are represented as 0 or 1
+ in this property. The two current sinks can be controlled
+ independently with both banks, or bank A can be configured to control
+ both sinks with the led-sources property.
+ minimum: 0
+ maximum: 1
+
+ label:
+ maxItems: 1
+
+ led-sources:
+ allOf:
+ - minItems: 1
+ maxItems: 2
+ items:
+ minimum: 0
+ maximum: 1
+
+ default-brightness:
+ description: Default brightness level on boot.
+ minimum: 0
+ maximum: 255
+
+ max-brightness:
+ description: Maximum brightness that is allowed during runtime.
+ minimum: 0
+ maximum: 255
+
+ ti,linear-mapping-mode:
+ description: |
+ Enable linear mapping mode. If disabled, then it will use exponential
+ mapping mode in which the ramp up/down appears to have a more uniform
+ transition to the human eye.
+ type: boolean
+
+ required:
+ - reg
+
+ additionalProperties: false
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led-controller@38 {
+ compatible = "ti,lm3630a";
+ reg = <0x38>;
+ enable-gpios = <&gpio2 5 GPIO_ACTIVE_HIGH>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ led-sources = <0 1>;
+ label = "lcd-backlight";
+ default-brightness = <200>;
+ max-brightness = <255>;
+ };
+ };
+ };
+ - |
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led-controller@38 {
+ compatible = "ti,lm3630a";
+ reg = <0x38>;
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ default-brightness = <150>;
+ ti,linear-mapping-mode;
+ };
+
+ led@1 {
+ reg = <1>;
+ default-brightness = <225>;
+ ti,linear-mapping-mode;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/leds/backlight/lp855x.txt b/Documentation/devicetree/bindings/leds/backlight/lp855x.txt
new file mode 100644
index 000000000..88f56641f
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/lp855x.txt
@@ -0,0 +1,72 @@
+lp855x bindings
+
+Required properties:
+ - compatible: "ti,lp8550", "ti,lp8551", "ti,lp8552", "ti,lp8553",
+ "ti,lp8555", "ti,lp8556", "ti,lp8557"
+ - reg: I2C slave address (u8)
+ - dev-ctrl: Value of DEVICE CONTROL register (u8). It depends on the device.
+
+Optional properties:
+ - bl-name: Backlight device name (string)
+ - init-brt: Initial value of backlight brightness (u8)
+ - pwm-period: PWM period value. Set only PWM input mode used (u32)
+ - rom-addr: Register address of ROM area to be updated (u8)
+ - rom-val: Register value to be updated (u8)
+ - power-supply: Regulator which controls the 3V rail
+ - enable-supply: Regulator which controls the EN/VDDIO input
+
+Example:
+
+ /* LP8555 */
+ backlight@2c {
+ compatible = "ti,lp8555";
+ reg = <0x2c>;
+
+ dev-ctrl = /bits/ 8 <0x00>;
+ pwm-period = <10000>;
+
+ /* 4V OV, 4 output LED0 string enabled */
+ rom_14h {
+ rom-addr = /bits/ 8 <0x14>;
+ rom-val = /bits/ 8 <0xcf>;
+ };
+
+ /* Heavy smoothing, 24ms ramp time step */
+ rom_15h {
+ rom-addr = /bits/ 8 <0x15>;
+ rom-val = /bits/ 8 <0xc7>;
+ };
+
+ /* 4 output LED1 string enabled */
+ rom_19h {
+ rom-addr = /bits/ 8 <0x19>;
+ rom-val = /bits/ 8 <0x0f>;
+ };
+ };
+
+ /* LP8556 */
+ backlight@2c {
+ compatible = "ti,lp8556";
+ reg = <0x2c>;
+
+ bl-name = "lcd-bl";
+ dev-ctrl = /bits/ 8 <0x85>;
+ init-brt = /bits/ 8 <0x10>;
+ };
+
+ /* LP8557 */
+ backlight@2c {
+ compatible = "ti,lp8557";
+ reg = <0x2c>;
+ enable-supply = <&backlight_vddio>;
+ power-supply = <&backlight_vdd>;
+
+ dev-ctrl = /bits/ 8 <0x41>;
+ init-brt = /bits/ 8 <0x0a>;
+
+ /* 4V OV, 4 output LED string enabled */
+ rom_14h {
+ rom-addr = /bits/ 8 <0x14>;
+ rom-val = /bits/ 8 <0xcf>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/leds/backlight/max8925-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/max8925-backlight.txt
new file mode 100644
index 000000000..b4cffdaa4
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/max8925-backlight.txt
@@ -0,0 +1,10 @@
+88pm860x-backlight bindings
+
+Optional properties:
+ - maxim,max8925-dual-string: whether support dual string
+
+Example:
+
+ backlights {
+ maxim,max8925-dual-string = <0>;
+ };
diff --git a/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
new file mode 100644
index 000000000..fcb8429f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/pwm-backlight.yaml
@@ -0,0 +1,104 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/pwm-backlight.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: pwm-backlight bindings
+
+maintainers:
+ - Lee Jones <lee.jones@linaro.org>
+ - Daniel Thompson <daniel.thompson@linaro.org>
+ - Jingoo Han <jingoohan1@gmail.com>
+
+properties:
+ compatible:
+ const: pwm-backlight
+
+ pwms:
+ maxItems: 1
+
+ pwm-names: true
+
+ power-supply:
+ description: regulator for supply voltage
+
+ enable-gpios:
+ description:
+ Contains a single GPIO specifier for the GPIO which enables and disables
+ the backlight.
+ maxItems: 1
+
+ post-pwm-on-delay-ms:
+ description:
+ Delay in ms between setting an initial (non-zero) PWM and enabling the
+ backlight using GPIO.
+
+ pwm-off-delay-ms:
+ description:
+ Delay in ms between disabling the backlight using GPIO and setting PWM
+ value to 0.
+
+ brightness-levels:
+ description:
+ Array of distinct brightness levels. Typically these are in the range
+ from 0 to 255, but any range starting at 0 will do. The actual brightness
+ level (PWM duty cycle) will be interpolated from these values. 0 means a
+ 0% duty cycle (darkest/off), while the last value in the array represents
+ a 100% duty cycle (brightest).
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+
+ default-brightness-level:
+ description:
+ The default brightness level (index into the array defined by the
+ "brightness-levels" property).
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ num-interpolated-steps:
+ description:
+ Number of interpolated steps between each value of brightness-levels
+ table. This way a high resolution pwm duty cycle can be used without
+ having to list out every possible value in the brightness-level array.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+dependencies:
+ default-brightness-level: [brightness-levels]
+ num-interpolated-steps: [brightness-levels]
+
+required:
+ - compatible
+ - pwms
+ - power-supply
+
+additionalProperties: false
+
+examples:
+ - |
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 5000000>;
+
+ brightness-levels = <0 4 8 16 32 64 128 255>;
+ default-brightness-level = <6>;
+
+ power-supply = <&vdd_bl_reg>;
+ enable-gpios = <&gpio 58 0>;
+ post-pwm-on-delay-ms = <10>;
+ pwm-off-delay-ms = <10>;
+ };
+
+ - |
+ // Example using num-interpolation-steps:
+ backlight {
+ compatible = "pwm-backlight";
+ pwms = <&pwm 0 5000000>;
+
+ brightness-levels = <0 2048 4096 8192 16384 65535>;
+ num-interpolated-steps = <2048>;
+ default-brightness-level = <4096>;
+
+ power-supply = <&vdd_bl_reg>;
+ enable-gpios = <&gpio 58 0>;
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
new file mode 100644
index 000000000..47938e372
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/qcom-wled.yaml
@@ -0,0 +1,253 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/backlight/qcom-wled.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Binding for Qualcomm Technologies, Inc. WLED driver
+
+maintainers:
+ - Bjorn Andersson <bjorn.andersson@linaro.org>
+ - Kiran Gunda <kgunda@codeaurora.org>
+
+description: |
+ WLED (White Light Emitting Diode) driver is used for controlling display
+ backlight that is part of PMIC on Qualcomm Technologies, Inc. reference
+ platforms. The PMIC is connected to the host processor via SPMI bus.
+
+properties:
+ compatible:
+ enum:
+ - qcom,pm8941-wled
+ - qcom,pmi8998-wled
+ - qcom,pm660l-wled
+ - qcom,pm8150l-wled
+
+ reg:
+ maxItems: 1
+
+ default-brightness:
+ description: |
+ brightness value on boot.
+
+ label: true
+
+ max-brightness:
+ description: |
+ Maximum brightness level.
+
+ qcom,cs-out:
+ description: |
+ enable current sink output.
+ This property is supported only for WLED3.
+ type: boolean
+
+ qcom,cabc:
+ description: |
+ enable content adaptive backlight control.
+ type: boolean
+
+ qcom,ext-gen:
+ description: |
+ use externally generated modulator signal to dim.
+ This property is supported only for WLED3.
+ type: boolean
+
+ qcom,current-limit:
+ description: |
+ mA; per-string current limit.
+ This property is supported only for WLED3.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ default: 20
+ minimum: 0
+ maximum: 25
+
+ qcom,current-limit-microamp:
+ description: |
+ uA; per-string current limit.
+ default: 25
+ minimum: 0
+ maximum: 30000
+ multipleOf: 25
+
+ qcom,current-boost-limit:
+ description: |
+ mA; boost current limit.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ qcom,switching-freq:
+ description: |
+ kHz; switching frequency.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 600, 640, 685, 738, 800, 872, 960, 1066, 1200, 1371, 1600, 1920,
+ 2400, 3200, 4800, 9600 ]
+
+ qcom,ovp:
+ description: |
+ V; Over-voltage protection limit.
+ This property is supported only for WLED3.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 27, 29, 32, 35 ]
+ default: 29
+
+ qcom,ovp-millivolt:
+ description: |
+ Over-voltage protection limit. This property is for WLED4 only.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 18100, 19600, 29600, 31100 ]
+ default: 29600
+
+ qcom,num-strings:
+ description: |
+ number of led strings attached.
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ qcom,enabled-strings:
+ description: |
+ Array of the WLED strings numbered from 0 to 3. Each
+ string of leds are operated individually. Specify the
+ list of strings used by the device. Any combination of
+ led strings can be used.
+ $ref: /schemas/types.yaml#/definitions/uint32-array
+ minItems: 1
+ maxItems: 4
+
+ qcom,external-pfet:
+ description: |
+ Specify if external PFET control for short circuit
+ protection is used. This property is supported only
+ for WLED4.
+ type: boolean
+
+ qcom,auto-string-detection:
+ description: |
+ Enables auto-detection of the WLED string configuration.
+ This feature is not supported for WLED3.
+ type: boolean
+
+ interrupts:
+ minItems: 1
+ items:
+ - description: over voltage protection interrupt.
+ - description: short circuit interrupt.
+
+ interrupt-names:
+ minItems: 1
+ items:
+ - const: ovp
+ - const: short
+
+ qcom,modulator-sel:
+ description: |
+ Selects the modulator used for brightness modulation.
+ Allowed values are,
+ 0 - Modulator A
+ 1 - Modulator B
+ This property is applicable only to WLED5 peripheral.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1 ]
+ default: 0
+
+ qcom,cabc-sel:
+ description: |
+ Selects the CABC pin signal used for brightness modulation.
+ Allowed values are,
+ 0 - CABC disabled
+ 1 - CABC 1
+ 2 - CABC 2
+ 3 - External signal (e.g. LPG) is used for dimming
+ This property is applicable only to WLED5 peripheral.
+ $ref: /schemas/types.yaml#/definitions/uint32
+ enum: [ 0, 1, 2, 3 ]
+
+allOf:
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: qcom,pm8941-wled
+
+ then:
+ properties:
+ qcom,current-boost-limit:
+ enum: [ 105, 385, 525, 805, 980, 1260, 1400, 1680 ]
+ default: 805
+
+ qcom,switching-freq:
+ default: 1600
+
+ qcom,num-strings:
+ enum: [ 1, 2, 3 ]
+
+ interrupts:
+ maxItems: 1
+
+ interrupt-names:
+ maxItems: 1
+
+ else:
+ properties:
+ qcom,current-boost-limit:
+ enum: [ 105, 280, 450, 620, 970, 1150, 1300, 1500 ]
+ default: 970
+
+ qcom,switching-freq:
+ default: 800
+
+ qcom,num-strings:
+ enum: [ 1, 2, 3, 4 ]
+
+ interrupts:
+ minItems: 2
+
+ interrupt-names:
+ minItems: 2
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - qcom,pm8150l-wled
+
+ then:
+ properties:
+ default-brightness:
+ minimum: 0
+ maximum: 32767
+
+ max-brightness:
+ minimum: 0
+ maximum: 32767
+
+ else:
+ properties:
+ default-brightness:
+ minimum: 0
+ maximum: 4095
+
+ max-brightness:
+ minimum: 0
+ maximum: 4095
+
+required:
+ - compatible
+ - reg
+ - label
+
+additionalProperties: false
+
+examples:
+ - |
+ backlight@d800 {
+ compatible = "qcom,pm8941-wled";
+ reg = <0xd800 0x100>;
+ label = "backlight";
+
+ qcom,cs-out;
+ qcom,current-limit = <20>;
+ qcom,current-boost-limit = <805>;
+ qcom,switching-freq = <1600>;
+ qcom,ovp = <29>;
+ qcom,num-strings = <2>;
+ qcom,enabled-strings = <0 1>;
+ };
diff --git a/Documentation/devicetree/bindings/leds/backlight/sky81452-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/sky81452-backlight.txt
new file mode 100644
index 000000000..8bf2940f5
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/sky81452-backlight.txt
@@ -0,0 +1,29 @@
+SKY81452-backlight bindings
+
+Required properties:
+- compatible : Must be "skyworks,sky81452-backlight"
+
+Optional properties:
+- name : Name of backlight device. Default is 'lcd-backlight'.
+- gpios : GPIO to use to EN pin.
+ See Documentation/devicetree/bindings/gpio/gpio.txt
+- led-sources : List of enabled channels from 0 to 5.
+ See Documentation/devicetree/bindings/leds/common.txt
+- skyworks,ignore-pwm : Ignore both PWM input
+- skyworks,dpwm-mode : Enable DPWM dimming mode, otherwise Analog dimming.
+- skyworks,phase-shift : Enable phase shift mode
+- skyworks,short-detection-threshold-volt
+ : It should be one of 4, 5, 6 and 7V.
+- skyworks,current-limit-mA
+ : It should be 2300mA or 2750mA.
+
+Example:
+
+ backlight {
+ compatible = "skyworks,sky81452-backlight";
+ name = "pwm-backlight";
+ led-sources = <0 1 2 5>;
+ skyworks,ignore-pwm;
+ skyworks,phase-shift;
+ skyworks,current-limit-mA = <2300>;
+ };
diff --git a/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt
new file mode 100644
index 000000000..5fb9279ac
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/tps65217-backlight.txt
@@ -0,0 +1,27 @@
+TPS65217 family of regulators
+
+The TPS65217 chip contains a boost converter and current sinks which can be
+used to drive LEDs for use as backlights.
+
+Required properties:
+- compatible: "ti,tps65217"
+- reg: I2C slave address
+- backlight: node for specifying WLED1 and WLED2 lines in TPS65217
+- isel: selection bit, valid values: 1 for ISEL1 (low-level) and 2 for ISEL2 (high-level)
+- fdim: PWM dimming frequency, valid values: 100, 200, 500, 1000
+- default-brightness: valid values: 0-100
+
+Each regulator is defined using the standard binding for regulators.
+
+Example:
+
+ tps: tps@24 {
+ reg = <0x24>;
+ compatible = "ti,tps65217";
+ backlight {
+ isel = <1>; /* 1 - ISET1, 2 ISET2 */
+ fdim = <100>; /* TPS65217_BL_FDIM_100HZ */
+ default-brightness = <50>;
+ };
+ };
+
diff --git a/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.txt b/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.txt
new file mode 100644
index 000000000..ff5c92138
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/backlight/zii,rave-sp-backlight.txt
@@ -0,0 +1,23 @@
+Zodiac Inflight Innovations RAVE Supervisory Processor Backlight Bindings
+
+RAVE SP backlight device is a "MFD cell" device corresponding to
+backlight functionality of RAVE Supervisory Processor. It is expected
+that its Device Tree node is specified as a child of the node
+corresponding to the parent RAVE SP device (as documented in
+Documentation/devicetree/bindings/mfd/zii,rave-sp.txt)
+
+Required properties:
+
+- compatible: Should be "zii,rave-sp-backlight"
+
+Example:
+
+ rave-sp {
+ compatible = "zii,rave-sp-rdu1";
+ current-speed = <38400>;
+
+ backlight {
+ compatible = "zii,rave-sp-backlight";
+ };
+ }
+
diff --git a/Documentation/devicetree/bindings/leds/common.txt b/Documentation/devicetree/bindings/leds/common.txt
new file mode 100644
index 000000000..26d770ef3
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/common.txt
@@ -0,0 +1 @@
+This file has moved to ./common.yaml.
diff --git a/Documentation/devicetree/bindings/leds/common.yaml b/Documentation/devicetree/bindings/leds/common.yaml
new file mode 100644
index 000000000..f1211e704
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/common.yaml
@@ -0,0 +1,227 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/common.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common leds properties
+
+maintainers:
+ - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+ - Pavel Machek <pavel@ucw.cz>
+
+description:
+ LED and flash LED devices provide the same basic functionality as current
+ regulators, but extended with LED and flash LED specific features like
+ blinking patterns, flash timeout, flash faults and external flash strobe mode.
+
+ Many LED devices expose more than one current output that can be connected
+ to one or more discrete LED component. Since the arrangement of connections
+ can influence the way of the LED device initialization, the LED components
+ have to be tightly coupled with the LED device binding. They are represented
+ by child nodes of the parent LED device binding.
+
+properties:
+ led-sources:
+ description:
+ List of device current outputs the LED is connected to. The outputs are
+ identified by the numbers that must be defined in the LED device binding
+ documentation.
+ $ref: /schemas/types.yaml#definitions/uint32-array
+
+ function:
+ description:
+ LED function. Use one of the LED_FUNCTION_* prefixed definitions
+ from the header include/dt-bindings/leds/common.h. If there is no
+ matching LED_FUNCTION available, add a new one.
+ $ref: /schemas/types.yaml#definitions/string
+
+ color:
+ description:
+ Color of the LED. Use one of the LED_COLOR_ID_* prefixed definitions from
+ the header include/dt-bindings/leds/common.h. If there is no matching
+ LED_COLOR_ID available, add a new one.
+ $ref: /schemas/types.yaml#definitions/uint32
+ minimum: 0
+ maximum: 9
+
+ function-enumerator:
+ description:
+ Integer to be used when more than one instance of the same function is
+ needed, differing only with an ordinal number.
+ $ref: /schemas/types.yaml#definitions/uint32
+
+ label:
+ description:
+ The label for this LED. If omitted, the label is taken from the node name
+ (excluding the unit address). It has to uniquely identify a device, i.e.
+ no other LED class device can be assigned the same label. This property is
+ deprecated - use 'function' and 'color' properties instead.
+ function-enumerator has no effect when this property is present.
+
+ default-state:
+ description:
+ The initial state of the LED. If the LED is already on or off and the
+ default-state property is set the to same value, then no glitch should be
+ produced where the LED momentarily turns off (or on). The "keep" setting
+ will keep the LED at whatever its current state is, without producing a
+ glitch.
+ $ref: /schemas/types.yaml#definitions/string
+ enum:
+ - on
+ - off
+ - keep
+ default: off
+
+ linux,default-trigger:
+ description:
+ This parameter, if present, is a string defining the trigger assigned to
+ the LED.
+ $ref: /schemas/types.yaml#definitions/string
+
+ enum:
+ # LED will act as a back-light, controlled by the framebuffer system
+ - backlight
+ # LED will turn on (but for leds-gpio see "default-state" property in
+ # Documentation/devicetree/bindings/leds/leds-gpio.yaml)
+ - default-on
+ # LED "double" flashes at a load average based rate
+ - heartbeat
+ # LED indicates disk activity
+ - disk-activity
+ # LED indicates IDE disk activity (deprecated), in new implementations
+ # use "disk-activity"
+ - ide-disk
+ # LED flashes at a fixed, configurable rate
+ - timer
+ # LED alters the brightness for the specified duration with one software
+ # timer (requires "led-pattern" property)
+ - pattern
+
+ led-pattern:
+ description: |
+ Array of integers with default pattern for certain triggers.
+
+ Each trigger may parse this property differently:
+ - one-shot : two numbers specifying delay on and delay off (in ms),
+ - timer : two numbers specifying delay on and delay off (in ms),
+ - pattern : the pattern is given by a series of tuples, of
+ brightness and duration (in ms). The exact format is
+ described in:
+ Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
+ $ref: /schemas/types.yaml#definitions/uint32-matrix
+ items:
+ minItems: 2
+ maxItems: 2
+
+ led-max-microamp:
+ description:
+ Maximum LED supply current in microamperes. This property can be made
+ mandatory for the board configurations introducing a risk of hardware
+ damage in case an excessive current is set.
+ For flash LED controllers with configurable current this property is
+ mandatory for the LEDs in the non-flash modes (e.g. torch or indicator).
+
+ panic-indicator:
+ description:
+ This property specifies that the LED should be used, if at all possible,
+ as a panic indicator.
+ type: boolean
+
+ trigger-sources:
+ description: |
+ List of devices which should be used as a source triggering this LED
+ activity. Some LEDs can be related to a specific device and should somehow
+ indicate its state. E.g. USB 2.0 LED may react to device(s) in a USB 2.0
+ port(s).
+ Another common example is switch or router with multiple Ethernet ports
+ each of them having its own LED assigned (assuming they are not
+ hardwired). In such cases this property should contain phandle(s) of
+ related source device(s).
+ In many cases LED can be related to more than one device (e.g. one USB LED
+ vs. multiple USB ports). Each source should be represented by a node in
+ the device tree and be referenced by a phandle and a set of phandle
+ arguments. A length of arguments should be specified by the
+ #trigger-source-cells property in the source node.
+ $ref: /schemas/types.yaml#definitions/phandle-array
+
+ # Required properties for flash LED child nodes:
+ flash-max-microamp:
+ description:
+ Maximum flash LED supply current in microamperes. Required for flash LED
+ nodes with configurable current.
+
+ flash-max-timeout-us:
+ description:
+ Maximum timeout in microseconds after which the flash LED is turned off.
+ Required for flash LED nodes with configurable timeout.
+
+additionalProperties: true
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/leds/common.h>
+
+ led-controller {
+ compatible = "gpio-leds";
+
+ led-0 {
+ function = LED_FUNCTION_STATUS;
+ linux,default-trigger = "heartbeat";
+ gpios = <&gpio0 0 GPIO_ACTIVE_HIGH>;
+ };
+
+ led-1 {
+ function = LED_FUNCTION_USB;
+ gpios = <&gpio0 1 GPIO_ACTIVE_HIGH>;
+ trigger-sources = <&ohci_port1>, <&ehci_port1>;
+ };
+ };
+
+ led-controller@0 {
+ compatible = "maxim,max77693-led";
+ reg = <0 0x100>;
+
+ led {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ led-sources = <0>, <1>;
+ led-max-microamp = <50000>;
+ flash-max-microamp = <320000>;
+ flash-max-timeout-us = <500000>;
+ };
+ };
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led-controller@30 {
+ compatible = "panasonic,an30259a";
+ reg = <0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ linux,default-trigger = "heartbeat";
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <1>;
+ };
+
+ led@2 {
+ reg = <2>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <2>;
+ };
+
+ led@3 {
+ reg = <3>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <3>;
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
new file mode 100644
index 000000000..fe7fa2587
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/cznic,turris-omnia-leds.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/cznic,turris-omnia-leds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: CZ.NIC's Turris Omnia LEDs driver
+
+maintainers:
+ - Marek Behún <marek.behun@nic.cz>
+
+description:
+ This module adds support for the RGB LEDs found on the front panel of the
+ Turris Omnia router. There are 12 RGB LEDs that are controlled by a
+ microcontroller that communicates via the I2C bus. Each LED is described
+ as a subnode of this I2C device.
+
+properties:
+ compatible:
+ const: cznic,turris-omnia-leds
+
+ reg:
+ description: I2C slave address of the microcontroller.
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^multi-led@[0-9a-b]$":
+ type: object
+ allOf:
+ - $ref: leds-class-multicolor.yaml#
+ description:
+ This node represents one of the RGB LED devices on Turris Omnia.
+ No subnodes need to be added for subchannels since this controller only
+ supports RGB LEDs.
+
+ properties:
+ reg:
+ minimum: 0
+ maximum: 11
+ description:
+ This property identifies one of the LEDs on the front panel of the
+ Turris Omnia router.
+
+ required:
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+
+ #include <dt-bindings/leds/common.h>
+
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led-controller@2b {
+ compatible = "cznic,turris-omnia-leds";
+ reg = <0x2b>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ multi-led@0 {
+ /*
+ * No subnodes are needed, this controller only supports RGB
+ * LEDs.
+ */
+ reg = <0>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_POWER;
+ linux,default-trigger = "heartbeat";
+ };
+
+ multi-led@a {
+ reg = <0xa>;
+ color = <LED_COLOR_ID_MULTI>;
+ function = LED_FUNCTION_INDICATOR;
+ function-enumerator = <1>;
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt b/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt
new file mode 100644
index 000000000..cbe8dfd29
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/irled/gpio-ir-tx.txt
@@ -0,0 +1,14 @@
+Device tree bindings for IR LED connected through gpio pin which is used as
+remote controller transmitter.
+
+Required properties:
+ - compatible: should be "gpio-ir-tx".
+ - gpios : Should specify the IR LED GPIO, see "gpios property" in
+ Documentation/devicetree/bindings/gpio/gpio.txt. Active low LEDs
+ should be indicated using flags in the GPIO specifier.
+
+Example:
+ irled@0 {
+ compatible = "gpio-ir-tx";
+ gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+ };
diff --git a/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt b/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt
new file mode 100644
index 000000000..66e5672c2
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/irled/pwm-ir-tx.txt
@@ -0,0 +1,13 @@
+Device tree bindings for IR LED connected through pwm pin which is used as
+remote controller transmitter.
+
+Required properties:
+ - compatible: should be "pwm-ir-tx".
+ - pwms : PWM property to point to the PWM device (phandle)/port (id)
+ and to specify the period time to be used: <&phandle id period_ns>;
+
+Example:
+ irled {
+ compatible = "pwm-ir-tx";
+ pwms = <&pwm0 0 10000000>;
+ };
diff --git a/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt b/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt
new file mode 100644
index 000000000..83ff1b4d7
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/irled/spi-ir-led.txt
@@ -0,0 +1,29 @@
+Device tree bindings for IR LED connected through SPI bus which is used as
+remote controller.
+
+The IR LED switch is connected to the MOSI line of the SPI device and the data
+are delivered thourgh that.
+
+Required properties:
+ - compatible: should be "ir-spi-led".
+
+Optional properties:
+ - duty-cycle: 8 bit value that represents the percentage of one period
+ in which the signal is active. It can be 50, 60, 70, 75, 80 or 90.
+ - led-active-low: boolean value that specifies whether the output is
+ negated with a NOT gate.
+ - power-supply: specifies the power source. It can either be a regulator
+ or a gpio which enables a regulator, i.e. a regulator-fixed as
+ described in
+ Documentation/devicetree/bindings/regulator/fixed-regulator.yaml
+
+Example:
+
+ irled@0 {
+ compatible = "ir-spi-led";
+ reg = <0x0>;
+ spi-max-frequency = <5000000>;
+ power-supply = <&vdd_led>;
+ led-active-low;
+ duty-cycle = /bits/ 8 <60>;
+ };
diff --git a/Documentation/devicetree/bindings/leds/leds-aat1290.txt b/Documentation/devicetree/bindings/leds/leds-aat1290.txt
new file mode 100644
index 000000000..62ed17ec0
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-aat1290.txt
@@ -0,0 +1,77 @@
+* Skyworks Solutions, Inc. AAT1290 Current Regulator for Flash LEDs
+
+The device is controlled through two pins: FL_EN and EN_SET. The pins when,
+asserted high, enable flash strobe and movie mode (max 1/2 of flash current)
+respectively. In order to add a capability of selecting the strobe signal source
+(e.g. CPU or camera sensor) there is an additional switch required, independent
+of the flash chip. The switch is controlled with pin control.
+
+Required properties:
+
+- compatible : Must be "skyworks,aat1290".
+- flen-gpios : Must be device tree identifier of the flash device FL_EN pin.
+- enset-gpios : Must be device tree identifier of the flash device EN_SET pin.
+
+Optional properties:
+- pinctrl-names : Must contain entries: "default", "host", "isp". Entries
+ "default" and "host" must refer to the same pin configuration
+ node, which sets the host as a strobe signal provider. Entry
+ "isp" must refer to the pin configuration node, which sets the
+ ISP as a strobe signal provider.
+
+A discrete LED element connected to the device must be represented by a child
+node - see Documentation/devicetree/bindings/leds/common.txt.
+
+Required properties of the LED child node:
+- led-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
+- flash-max-microamp : see Documentation/devicetree/bindings/leds/common.txt
+ Maximum flash LED supply current can be calculated using
+ following formula: I = 1A * 162kohm / Rset.
+- flash-max-timeout-us : see Documentation/devicetree/bindings/leds/common.txt
+ Maximum flash timeout can be calculated using following
+ formula: T = 8.82 * 10^9 * Ct.
+
+Optional properties of the LED child node:
+- function : see Documentation/devicetree/bindings/leds/common.txt
+- color : see Documentation/devicetree/bindings/leds/common.txt
+- label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
+
+Example (by Ct = 220nF, Rset = 160kohm and exynos4412-trats2 board with
+a switch that allows for routing strobe signal either from the host or from
+the camera sensor):
+
+#include "exynos4412.dtsi"
+#include <dt-bindings/leds/common.h>
+
+led-controller {
+ compatible = "skyworks,aat1290";
+ flen-gpios = <&gpj1 1 GPIO_ACTIVE_HIGH>;
+ enset-gpios = <&gpj1 2 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default", "host", "isp";
+ pinctrl-0 = <&camera_flash_host>;
+ pinctrl-1 = <&camera_flash_host>;
+ pinctrl-2 = <&camera_flash_isp>;
+
+ camera_flash: led {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ led-max-microamp = <520833>;
+ flash-max-microamp = <1012500>;
+ flash-max-timeout-us = <1940000>;
+ };
+};
+
+&pinctrl_0 {
+ camera_flash_host: camera-flash-host {
+ samsung,pins = "gpj1-0";
+ samsung,pin-function = <1>;
+ samsung,pin-val = <0>;
+ };
+
+ camera_flash_isp: camera-flash-isp {
+ samsung,pins = "gpj1-0";
+ samsung,pin-function = <1>;
+ samsung,pin-val = <1>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-an30259a.txt b/Documentation/devicetree/bindings/leds/leds-an30259a.txt
new file mode 100644
index 000000000..cbd833906
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-an30259a.txt
@@ -0,0 +1,55 @@
+* Panasonic AN30259A 3-channel LED driver
+
+The AN30259A is a LED controller capable of driving three LEDs independently. It supports
+constant current output and sloping current output modes. The chip is connected over I2C.
+
+Required properties:
+ - compatible: Must be "panasonic,an30259a".
+ - reg: I2C slave address.
+ - #address-cells: Must be 1.
+ - #size-cells: Must be 0.
+
+Each LED is represented as a sub-node of the panasonic,an30259a node.
+
+Required sub-node properties:
+ - reg: Pin that the LED is connected to. Must be 1, 2, or 3.
+
+Optional sub-node properties:
+ - function :
+ see Documentation/devicetree/bindings/leds/common.txt
+ - color :
+ see Documentation/devicetree/bindings/leds/common.txt
+ - label :
+ see Documentation/devicetree/bindings/leds/common.txt (deprecated)
+ - linux,default-trigger :
+ see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+#include <dt-bindings/leds/common.h>
+
+led-controller@30 {
+ compatible = "panasonic,an30259a";
+ reg = <0x30>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ linux,default-trigger = "heartbeat";
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@2 {
+ reg = <2>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@3 {
+ reg = <3>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-aw2013.yaml b/Documentation/devicetree/bindings/leds/leds-aw2013.yaml
new file mode 100644
index 000000000..e24b0d15e
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-aw2013.yaml
@@ -0,0 +1,90 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-aw2013.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AWINIC AW2013 3-channel LED Driver
+
+maintainers:
+ - Nikita Travkin <nikitos.tr@gmail.com>
+
+description: |
+ The AW2013 is a 3-channel LED driver with I2C interface. It can control
+ LED brightness with PWM output.
+
+properties:
+ compatible:
+ const: awinic,aw2013
+
+ reg:
+ maxItems: 1
+
+ vcc-supply:
+ description: Regulator providing power to the "VCC" pin.
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^led@[0-2]$":
+ type: object
+ $ref: common.yaml#
+
+ properties:
+ reg:
+ description: Index of the LED.
+ minimum: 0
+ maximum: 2
+
+required:
+ - compatible
+ - reg
+ - "#address-cells"
+ - "#size-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/leds/common.h>
+
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led-controller@45 {
+ compatible = "awinic,aw2013";
+ reg = <0x45>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ vcc-supply = <&pm8916_l17>;
+
+ led@0 {
+ reg = <0>;
+ led-max-microamp = <5000>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led@1 {
+ reg = <1>;
+ led-max-microamp = <5000>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@2 {
+ reg = <2>;
+ led-max-microamp = <5000>;
+ function = LED_FUNCTION_INDICATOR;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+ };
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6328.txt b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
new file mode 100644
index 000000000..ccebce597
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-bcm6328.txt
@@ -0,0 +1,319 @@
+LEDs connected to Broadcom BCM6328 controller
+
+This controller is present on BCM6318, BCM6328, BCM6362 and BCM63268.
+In these SoCs it's possible to control LEDs both as GPIOs or by hardware.
+However, on some devices there are Serial LEDs (LEDs connected to a 74x164
+controller), which can either be controlled by software (exporting the 74x164
+as spi-gpio. See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or
+by hardware using this driver.
+Some of these Serial LEDs are hardware controlled (e.g. ethernet LEDs) and
+exporting the 74x164 as spi-gpio prevents those LEDs to be hardware
+controlled, so the only chance to keep them working is by using this driver.
+
+BCM6328 LED controller has a HWDIS register, which controls whether a LED
+should be controlled by a hardware signal instead of the MODE register value,
+with 0 meaning hardware control enabled and 1 hardware control disabled. This
+is usually 1:1 for hardware to LED signals, but through the activity/link
+registers you have some limited control over rerouting the LEDs (as
+explained later in brcm,link-signal-sources). Even if a LED is hardware
+controlled you are still able to make it blink or light it up if it isn't,
+but you can't turn it off if the hardware decides to light it up. For this
+reason, hardware controlled LEDs aren't registered as LED class devices.
+
+Required properties:
+ - compatible : should be "brcm,bcm6328-leds".
+ - #address-cells : must be 1.
+ - #size-cells : must be 0.
+ - reg : BCM6328 LED controller address and size.
+
+Optional properties:
+ - brcm,serial-leds : Boolean, enables Serial LEDs.
+ Default : false
+ - brcm,serial-mux : Boolean, enables Serial LEDs multiplexing.
+ Default : false
+ - brcm,serial-clk-low : Boolean, makes clock signal active low.
+ Default : false
+ - brcm,serial-dat-low : Boolean, makes data signal active low.
+ Default : false
+ - brcm,serial-shift-inv : Boolean, inverts Serial LEDs shift direction.
+ Default : false
+
+Each LED is represented as a sub-node of the brcm,bcm6328-leds device.
+
+LED sub-node required properties:
+ - reg : LED pin number (only LEDs 0 to 23 are valid).
+
+LED sub-node optional properties:
+ a) Optional properties for sub-nodes related to software controlled LEDs:
+ - label : see Documentation/devicetree/bindings/leds/common.txt
+ - active-low : Boolean, makes LED active low.
+ Default : false
+ - default-state : see
+ Documentation/devicetree/bindings/leds/common.txt
+ - linux,default-trigger : see
+ Documentation/devicetree/bindings/leds/common.txt
+
+ b) Optional properties for sub-nodes related to hardware controlled LEDs:
+ - brcm,hardware-controlled : Boolean, makes this LED hardware controlled.
+ Default : false
+ - brcm,link-signal-sources : An array of hardware link
+ signal sources. Up to four link hardware signals can get muxed into
+ these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may
+ be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs
+ 4 to 7. A signal can be muxed to more than one LED, and one LED can
+ have more than one source signal.
+ - brcm,activity-signal-sources : An array of hardware activity
+ signal sources. Up to four activity hardware signals can get muxed into
+ these LEDs. Only valid for LEDs 0 to 7, where LED signals 0 to 3 may
+ be muxed to LEDs 0 to 3, and signals 4 to 7 may be muxed to LEDs
+ 4 to 7. A signal can be muxed to more than one LED, and one LED can
+ have more than one source signal.
+
+Examples:
+Scenario 1 : BCM6328 with 4 EPHY LEDs
+ leds0: led-controller@10000800 {
+ compatible = "brcm,bcm6328-leds";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10000800 0x24>;
+
+ alarm_red@2 {
+ reg = <2>;
+ active-low;
+ label = "red:alarm";
+ };
+ inet_green@3 {
+ reg = <3>;
+ active-low;
+ label = "green:inet";
+ };
+ power_green@4 {
+ reg = <4>;
+ active-low;
+ label = "green:power";
+ default-state = "on";
+ };
+ ephy0_spd@17 {
+ reg = <17>;
+ brcm,hardware-controlled;
+ };
+ ephy1_spd@18 {
+ reg = <18>;
+ brcm,hardware-controlled;
+ };
+ ephy2_spd@19 {
+ reg = <19>;
+ brcm,hardware-controlled;
+ };
+ ephy3_spd@20 {
+ reg = <20>;
+ brcm,hardware-controlled;
+ };
+ };
+
+Scenario 2 : BCM63268 with Serial/GPHY0 LEDs
+ leds0: led-controller@10001900 {
+ compatible = "brcm,bcm6328-leds";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10001900 0x24>;
+ brcm,serial-leds;
+ brcm,serial-dat-low;
+ brcm,serial-shift-inv;
+
+ gphy0_spd0@0 {
+ reg = <0>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <0>;
+ };
+ gphy0_spd1@1 {
+ reg = <1>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <1>;
+ };
+ inet_red@2 {
+ reg = <2>;
+ active-low;
+ label = "red:inet";
+ };
+ dsl_green@3 {
+ reg = <3>;
+ active-low;
+ label = "green:dsl";
+ };
+ usb_green@4 {
+ reg = <4>;
+ active-low;
+ label = "green:usb";
+ };
+ wps_green@7 {
+ reg = <7>;
+ active-low;
+ label = "green:wps";
+ };
+ inet_green@8 {
+ reg = <8>;
+ active-low;
+ label = "green:inet";
+ };
+ ephy0_act@9 {
+ reg = <9>;
+ brcm,hardware-controlled;
+ };
+ ephy1_act@10 {
+ reg = <10>;
+ brcm,hardware-controlled;
+ };
+ ephy2_act@11 {
+ reg = <11>;
+ brcm,hardware-controlled;
+ };
+ gphy0_act@12 {
+ reg = <12>;
+ brcm,hardware-controlled;
+ };
+ ephy0_spd@13 {
+ reg = <13>;
+ brcm,hardware-controlled;
+ };
+ ephy1_spd@14 {
+ reg = <14>;
+ brcm,hardware-controlled;
+ };
+ ephy2_spd@15 {
+ reg = <15>;
+ brcm,hardware-controlled;
+ };
+ power_green@20 {
+ reg = <20>;
+ active-low;
+ label = "green:power";
+ default-state = "on";
+ };
+ };
+
+Scenario 3 : BCM6362 with 1 LED for each EPHY
+ leds0: led-controller@10001900 {
+ compatible = "brcm,bcm6328-leds";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10001900 0x24>;
+
+ usb@0 {
+ reg = <0>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <0>;
+ brcm,activity-signal-sources = <0>;
+ /* USB link/activity routed to USB LED */
+ };
+ inet@1 {
+ reg = <1>;
+ brcm,hardware-controlled;
+ brcm,activity-signal-sources = <1>;
+ /* INET activity routed to INET LED */
+ };
+ ephy0@4 {
+ reg = <4>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <4>;
+ /* EPHY0 link routed to EPHY0 LED */
+ };
+ ephy1@5 {
+ reg = <5>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <5>;
+ /* EPHY1 link routed to EPHY1 LED */
+ };
+ ephy2@6 {
+ reg = <6>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <6>;
+ /* EPHY2 link routed to EPHY2 LED */
+ };
+ ephy3@7 {
+ reg = <7>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <7>;
+ /* EPHY3 link routed to EPHY3 LED */
+ };
+ power_green@20 {
+ reg = <20>;
+ active-low;
+ label = "green:power";
+ default-state = "on";
+ };
+ };
+
+Scenario 4 : BCM6362 with 1 LED for all EPHYs
+ leds0: led-controller@10001900 {
+ compatible = "brcm,bcm6328-leds";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10001900 0x24>;
+
+ usb@0 {
+ reg = <0>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <0 1>;
+ brcm,activity-signal-sources = <0 1>;
+ /* USB/INET link/activity routed to USB LED */
+ };
+ ephy@4 {
+ reg = <4>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <4 5 6 7>;
+ /* EPHY0/1/2/3 link routed to EPHY0 LED */
+ };
+ power_green@20 {
+ reg = <20>;
+ active-low;
+ label = "green:power";
+ default-state = "on";
+ };
+ };
+
+Scenario 5 : BCM6362 with EPHY LEDs swapped
+ leds0: led-controller@10001900 {
+ compatible = "brcm,bcm6328-leds";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x10001900 0x24>;
+
+ usb@0 {
+ reg = <0>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <0>;
+ brcm,activity-signal-sources = <0 1>;
+ /* USB link/act and INET act routed to USB LED */
+ };
+ ephy0@4 {
+ reg = <4>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <7>;
+ /* EPHY3 link routed to EPHY0 LED */
+ };
+ ephy1@5 {
+ reg = <5>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <6>;
+ /* EPHY2 link routed to EPHY1 LED */
+ };
+ ephy2@6 {
+ reg = <6>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <5>;
+ /* EPHY1 link routed to EPHY2 LED */
+ };
+ ephy3@7 {
+ reg = <7>;
+ brcm,hardware-controlled;
+ brcm,link-signal-sources = <4>;
+ /* EPHY0 link routed to EPHY3 LED */
+ };
+ power_green@20 {
+ reg = <20>;
+ active-low;
+ label = "green:power";
+ default-state = "on";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/leds/leds-bcm6358.txt b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
new file mode 100644
index 000000000..da5708e7b
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-bcm6358.txt
@@ -0,0 +1,145 @@
+LEDs connected to Broadcom BCM6358 controller
+
+This controller is present on BCM6358 and BCM6368.
+In these SoCs there are Serial LEDs (LEDs connected to a 74x164 controller),
+which can either be controlled by software (exporting the 74x164 as spi-gpio.
+See Documentation/devicetree/bindings/gpio/gpio-74x164.txt), or
+by hardware using this driver.
+
+Required properties:
+ - compatible : should be "brcm,bcm6358-leds".
+ - #address-cells : must be 1.
+ - #size-cells : must be 0.
+ - reg : BCM6358 LED controller address and size.
+
+Optional properties:
+ - brcm,clk-div : SCK signal divider. Possible values are 1, 2, 4 and 8.
+ Default : 1
+ - brcm,clk-dat-low : Boolean, makes clock and data signals active low.
+ Default : false
+
+Each LED is represented as a sub-node of the brcm,bcm6358-leds device.
+
+LED sub-node required properties:
+ - reg : LED pin number (only LEDs 0 to 31 are valid).
+
+LED sub-node optional properties:
+ - label : see Documentation/devicetree/bindings/leds/common.txt
+ - active-low : Boolean, makes LED active low.
+ Default : false
+ - default-state : see
+ Documentation/devicetree/bindings/leds/common.txt
+ - linux,default-trigger : see
+ Documentation/devicetree/bindings/leds/common.txt
+
+Examples:
+Scenario 1 : BCM6358
+ leds0: led-controller@fffe00d0 {
+ compatible = "brcm,bcm6358-leds";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0xfffe00d0 0x8>;
+
+ alarm_white {
+ reg = <0>;
+ active-low;
+ label = "white:alarm";
+ };
+ tv_white {
+ reg = <2>;
+ active-low;
+ label = "white:tv";
+ };
+ tel_white {
+ reg = <3>;
+ active-low;
+ label = "white:tel";
+ };
+ adsl_white {
+ reg = <4>;
+ active-low;
+ label = "white:adsl";
+ };
+ };
+
+Scenario 2 : BCM6368
+ leds0: led-controller@100000d0 {
+ compatible = "brcm,bcm6358-leds";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x100000d0 0x8>;
+ brcm,pol-low;
+ brcm,clk-div = <4>;
+
+ power_red {
+ reg = <0>;
+ active-low;
+ label = "red:power";
+ };
+ power_green {
+ reg = <1>;
+ active-low;
+ label = "green:power";
+ default-state = "on";
+ };
+ power_blue {
+ reg = <2>;
+ label = "blue:power";
+ };
+ broadband_red {
+ reg = <3>;
+ active-low;
+ label = "red:broadband";
+ };
+ broadband_green {
+ reg = <4>;
+ label = "green:broadband";
+ };
+ broadband_blue {
+ reg = <5>;
+ active-low;
+ label = "blue:broadband";
+ };
+ wireless_red {
+ reg = <6>;
+ active-low;
+ label = "red:wireless";
+ };
+ wireless_green {
+ reg = <7>;
+ active-low;
+ label = "green:wireless";
+ };
+ wireless_blue {
+ reg = <8>;
+ label = "blue:wireless";
+ };
+ phone_red {
+ reg = <9>;
+ active-low;
+ label = "red:phone";
+ };
+ phone_green {
+ reg = <10>;
+ active-low;
+ label = "green:phone";
+ };
+ phone_blue {
+ reg = <11>;
+ label = "blue:phone";
+ };
+ upgrading_red {
+ reg = <12>;
+ active-low;
+ label = "red:upgrading";
+ };
+ upgrading_green {
+ reg = <13>;
+ active-low;
+ label = "green:upgrading";
+ };
+ upgrading_blue {
+ reg = <14>;
+ label = "blue:upgrading";
+ };
+ };
diff --git a/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
new file mode 100644
index 000000000..37445c68c
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-class-multicolor.yaml
@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-class-multicolor.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Common properties for the multicolor LED class.
+
+maintainers:
+ - Dan Murphy <dmurphy@ti.com>
+
+description: |
+ Bindings for multi color LEDs show how to describe current outputs of
+ either integrated multi-color LED elements (like RGB, RGBW, RGBWA-UV
+ etc.) or standalone LEDs, to achieve logically grouped multi-color LED
+ modules. This is achieved by adding multi-led nodes layer to the
+ monochrome LED bindings.
+ The nodes and properties defined in this document are unique to the multicolor
+ LED class. Common LED nodes and properties are inherited from the common.yaml
+ within this documentation directory.
+
+patternProperties:
+ "^multi-led@([0-9a-f])$":
+ type: object
+ description: Represents the LEDs that are to be grouped.
+ properties:
+ color:
+ description: |
+ For multicolor LED support this property should be defined as either
+ LED_COLOR_ID_RGB or LED_COLOR_ID_MULTI which can be found in
+ include/linux/leds/common.h.
+ enum: [ 8, 9 ]
+
+ $ref: "common.yaml#"
+
+ required:
+ - color
+
+additionalProperties: true
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-cpcap.txt b/Documentation/devicetree/bindings/leds/leds-cpcap.txt
new file mode 100644
index 000000000..ebf7cdc7f
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-cpcap.txt
@@ -0,0 +1,29 @@
+Motorola CPCAP PMIC LEDs
+------------------------
+
+This module is part of the CPCAP. For more details about the whole
+chip see Documentation/devicetree/bindings/mfd/motorola-cpcap.txt.
+
+Requires node properties:
+- compatible: should be one of
+ * "motorola,cpcap-led-mdl" (Main Display Lighting)
+ * "motorola,cpcap-led-kl" (Keyboard Lighting)
+ * "motorola,cpcap-led-adl" (Aux Display Lighting)
+ * "motorola,cpcap-led-red" (Red Triode)
+ * "motorola,cpcap-led-green" (Green Triode)
+ * "motorola,cpcap-led-blue" (Blue Triode)
+ * "motorola,cpcap-led-cf" (Camera Flash)
+ * "motorola,cpcap-led-bt" (Bluetooth)
+ * "motorola,cpcap-led-cp" (Camera Privacy LED)
+- label: see Documentation/devicetree/bindings/leds/common.txt
+- vdd-supply: A phandle to the regulator powering the LED
+
+Example:
+
+&cpcap {
+ cpcap_led_red: red-led {
+ compatible = "motorola,cpcap-led-red";
+ label = "cpcap:red";
+ vdd-supply = <&sw5>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-cr0014114.txt b/Documentation/devicetree/bindings/leds/leds-cr0014114.txt
new file mode 100644
index 000000000..f8de7516a
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-cr0014114.txt
@@ -0,0 +1,66 @@
+Crane Merchandising System - cr0014114 LED driver
+-------------------------------------------------
+
+This LED Board is widely used in vending machines produced
+by Crane Merchandising Systems.
+
+Required properties:
+- compatible: "crane,cr0014114"
+
+Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
+apply. In particular, "reg" and "spi-max-frequency" properties must be given.
+
+LED sub-node properties:
+- function :
+ see Documentation/devicetree/bindings/leds/common.txt
+- color :
+ see Documentation/devicetree/bindings/leds/common.txt
+- label :
+ see Documentation/devicetree/bindings/leds/common.txt (deprecated)
+- linux,default-trigger : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+
+Example
+-------
+
+#include <dt-bindings/leds/common.h>
+
+led-controller@0 {
+ compatible = "crane,cr0014114";
+ reg = <0>;
+ spi-max-frequency = <50000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ function = "coin";
+ color = <LED_COLOR_ID_RED>;
+ };
+ led@1 {
+ reg = <1>;
+ function = "coin";
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ led@2 {
+ reg = <2>;
+ function = "coin";
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ led@3 {
+ reg = <3>;
+ function = "bill";
+ color = <LED_COLOR_ID_RED>;
+ };
+ led@4 {
+ reg = <4>;
+ function = "bill";
+ color = <LED_COLOR_ID_GREEN>;
+ };
+ led@5 {
+ reg = <5>;
+ function = "bill";
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ ...
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-el15203000.txt b/Documentation/devicetree/bindings/leds/leds-el15203000.txt
new file mode 100644
index 000000000..182f0035e
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-el15203000.txt
@@ -0,0 +1,69 @@
+Crane Merchandising System - EL15203000 LED driver
+--------------------------------------------------
+
+This LED Board (aka RED LEDs board) is widely used in
+coffee vending machines produced by Crane Merchandising Systems.
+The board manages 3 LEDs and supports predefined blinking patterns
+for specific leds.
+
+Vending area LED encoded with symbol 'V' (hex code 0x56).
+Doesn't have any hardware blinking pattern.
+
+Screen light tube LED which surrounds vending machine screen and
+encoded with symbol 'S' (hex code 0x53). Supports blinking breathing pattern.
+
+Water Pipe LED encoded with symbol 'P' (hex code 0x50) and
+actually consists of 5 LEDs that exposed by protocol like one LED.
+Supports next patterns:
+- cascade pattern
+- inversed cascade pattern
+- bounce pattern
+- inversed bounce pattern
+
+Required properties:
+- compatible : "crane,el15203000"
+- #address-cells : must be 1
+- #size-cells : must be 0
+
+Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
+apply. In particular, "reg" and "spi-max-frequency" properties must be given.
+
+Optional LED sub-node properties:
+- function:
+ see Documentation/devicetree/bindings/leds/common.txt
+- color:
+ see Documentation/devicetree/bindings/leds/common.txt
+
+Example
+-------
+
+#include <dt-bindings/leds/common.h>
+
+led-controller@0 {
+ compatible = "crane,el15203000";
+ reg = <0>;
+ spi-max-frequency = <50000>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* water pipe */
+ led@50 {
+ reg = <0x50>;
+ function = "pipe";
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ /* screen frame */
+ led@53 {
+ reg = <0x53>;
+ function = "screen";
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ /* vending area */
+ led@56 {
+ reg = <0x56>;
+ function = "vend";
+ color = <LED_COLOR_ID_RED>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-gpio.yaml b/Documentation/devicetree/bindings/leds/leds-gpio.yaml
new file mode 100644
index 000000000..7ad2baeda
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-gpio.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-gpio.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEDs connected to GPIO lines
+
+maintainers:
+ - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+ - Pavel Machek <pavel@ucw.cz>
+
+description:
+ Each LED is represented as a sub-node of the gpio-leds device. Each
+ node's name represents the name of the corresponding LED.
+
+properties:
+ compatible:
+ const: gpio-leds
+
+patternProperties:
+ # The first form is preferred, but fall back to just 'led' anywhere in the
+ # node name to at least catch some child nodes.
+ "(^led-[0-9a-f]$|led)":
+ type: object
+
+ $ref: common.yaml#
+
+ properties:
+ gpios:
+ maxItems: 1
+
+ retain-state-suspended:
+ description:
+ The suspend state can be retained.Such as charge-led gpio.
+ type: boolean
+
+ retain-state-shutdown:
+ description:
+ Retain the state of the LED on shutdown. Useful in BMC systems, for
+ example when the BMC is rebooted while the host remains up.
+ type: boolean
+
+ required:
+ - gpios
+
+additionalProperties: false
+
+examples:
+ - |
+
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/leds/common.h>
+
+ leds {
+ compatible = "gpio-leds";
+ led-0 {
+ gpios = <&mcu_pio 0 GPIO_ACTIVE_LOW>;
+ linux,default-trigger = "disk-activity";
+ function = LED_FUNCTION_DISK;
+ };
+
+ led-1 {
+ gpios = <&mcu_pio 1 GPIO_ACTIVE_HIGH>;
+ /* Keep LED on if BIOS detected hardware fault */
+ default-state = "keep";
+ function = LED_FUNCTION_FAULT;
+ };
+ };
+
+ run-control {
+ compatible = "gpio-leds";
+ led-0 {
+ gpios = <&mpc8572 6 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_RED>;
+ default-state = "off";
+ };
+ led-1 {
+ gpios = <&mpc8572 7 GPIO_ACTIVE_HIGH>;
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "on";
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt b/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt
new file mode 100644
index 000000000..676d43ec8
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-is31fl319x.txt
@@ -0,0 +1,61 @@
+LEDs connected to is31fl319x LED controller chip
+
+Required properties:
+- compatible : Should be any of
+ "issi,is31fl3190"
+ "issi,is31fl3191"
+ "issi,is31fl3193"
+ "issi,is31fl3196"
+ "issi,is31fl3199"
+ "si-en,sn3199".
+- #address-cells: Must be 1.
+- #size-cells: Must be 0.
+- reg: 0x64, 0x65, 0x66, or 0x67.
+
+Optional properties:
+- audio-gain-db : audio gain selection for external analog modulation input.
+ Valid values: 0 - 21, step by 3 (rounded down)
+ Default: 0
+- shutdown-gpios : Specifier of the GPIO connected to SDB pin of the chip.
+
+Each led is represented as a sub-node of the issi,is31fl319x device.
+There can be less leds subnodes than the chip can support but not more.
+
+Required led sub-node properties:
+- reg : number of LED line
+ Valid values: 1 - number of leds supported by the chip variant.
+
+Optional led sub-node properties:
+- label : see Documentation/devicetree/bindings/leds/common.txt.
+- linux,default-trigger :
+ see Documentation/devicetree/bindings/leds/common.txt.
+- led-max-microamp : (optional)
+ Valid values: 5000 - 40000, step by 5000 (rounded down)
+ Default: 20000 (20 mA)
+ Note: a driver will take the lowest of all led limits since the
+ chip has a single global setting. The lowest value will be chosen
+ due to the PWM specificity, where lower brightness is achieved
+ by reducing the dury-cycle of pulses and not the current, which
+ will always have its peak value equal to led-max-microamp.
+
+Examples:
+
+fancy_leds: leds@65 {
+ compatible = "issi,is31fl3196";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x65>;
+ shutdown-gpios = <&gpio0 11 GPIO_ACTIVE_HIGH>;
+
+ red_aux: led@1 {
+ label = "red:aux";
+ reg = <1>;
+ led-max-microamp = <10000>;
+ };
+
+ green_power: led@5 {
+ label = "green:power";
+ reg = <5>;
+ linux,default-trigger = "default-on";
+ };
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt b/Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt
new file mode 100644
index 000000000..926c21179
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-is31fl32xx.txt
@@ -0,0 +1,52 @@
+Binding for ISSI IS31FL32xx and Si-En SN32xx LED Drivers
+
+The IS31FL32xx/SN32xx family of LED drivers are I2C devices with multiple
+constant-current channels, each with independent 256-level PWM control.
+Each LED is represented as a sub-node of the device.
+
+Required properties:
+- compatible: one of
+ issi,is31fl3236
+ issi,is31fl3235
+ issi,is31fl3218
+ issi,is31fl3216
+ si-en,sn3218
+ si-en,sn3216
+- reg: I2C slave address
+- address-cells : must be 1
+- size-cells : must be 0
+
+LED sub-node properties:
+- reg : LED channel number (1..N)
+- label : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+
+
+Example:
+
+is31fl3236: led-controller@3c {
+ compatible = "issi,is31fl3236";
+ reg = <0x3c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@1 {
+ reg = <1>;
+ label = "EB:blue:usr0";
+ };
+ led@2 {
+ reg = <2>;
+ label = "EB:blue:usr1";
+ };
+ ...
+ led@36 {
+ reg = <36>;
+ label = "EB:blue:usr35";
+ };
+};
+
+For more product information please see the links below:
+http://www.issi.com/US/product-analog-fxled-driver.shtml
+http://www.si-en.com/product.asp?parentid=890
diff --git a/Documentation/devicetree/bindings/leds/leds-ktd2692.txt b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
new file mode 100644
index 000000000..853737452
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-ktd2692.txt
@@ -0,0 +1,50 @@
+* Kinetic Technologies - KTD2692 Flash LED Driver
+
+KTD2692 is the ideal power solution for high-power flash LEDs.
+It uses ExpressWire single-wire programming for maximum flexibility.
+
+The ExpressWire interface through CTRL pin can control LED on/off and
+enable/disable the IC, Movie(max 1/3 of Flash current) / Flash mode current,
+Flash timeout, LVP(low voltage protection).
+
+Also, When the AUX pin is pulled high while CTRL pin is high,
+LED current will be ramped up to the flash-mode current level.
+
+Required properties:
+- compatible : Should be "kinetic,ktd2692".
+- ctrl-gpios : Specifier of the GPIO connected to CTRL pin.
+- aux-gpios : Specifier of the GPIO connected to AUX pin.
+
+Optional properties:
+- vin-supply : "vin" LED supply (2.7V to 5.5V).
+ See Documentation/devicetree/bindings/regulator/regulator.txt
+
+A discrete LED element connected to the device must be represented by a child
+node - See Documentation/devicetree/bindings/leds/common.txt
+
+Required properties for flash LED child nodes:
+ See Documentation/devicetree/bindings/leds/common.txt
+- led-max-microamp : Minimum Threshold for Timer protection
+ is defined internally (Maximum 300mA).
+- flash-max-microamp : Flash LED maximum current
+ Formula : I(mA) = 15000 / Rset.
+- flash-max-timeout-us : Flash LED maximum timeout.
+
+Optional properties for flash LED child nodes:
+- label : See Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+ktd2692 {
+ compatible = "kinetic,ktd2692";
+ ctrl-gpios = <&gpc0 1 0>;
+ aux-gpios = <&gpc0 2 0>;
+ vin-supply = <&vbat>;
+
+ flash-led {
+ label = "ktd2692-flash";
+ led-max-microamp = <300000>;
+ flash-max-microamp = <1500000>;
+ flash-max-timeout-us = <1835000>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-lm3532.txt b/Documentation/devicetree/bindings/leds/leds-lm3532.txt
new file mode 100644
index 000000000..097490a5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lm3532.txt
@@ -0,0 +1,105 @@
+* Texas Instruments - lm3532 White LED driver with ambient light sensing
+capability.
+
+The LM3532 provides the 3 high-voltage, low-side current sinks. The device is
+programmable over an I2C-compatible interface and has independent
+current control for all three channels. The adaptive current regulation
+method allows for different LED currents in each current sink thus allowing
+for a wide variety of backlight and keypad applications.
+
+The main features of the LM3532 include dual ambient light sensor inputs
+each with 32 internal voltage setting resistors, 8-bit logarithmic and linear
+brightness control, dual external PWM brightness control inputs, and up to
+1000:1 dimming ratio with programmable fade in and fade out settings.
+
+Required properties:
+ - compatible : "ti,lm3532"
+ - reg : I2C slave address
+ - #address-cells : 1
+ - #size-cells : 0
+
+Optional properties:
+ - enable-gpios : gpio pin to enable (active high)/disable the device.
+ - ramp-up-us - The Run time ramp rates/step are from one current
+ set-point to another after the device has reached its
+ initial target set point from turn-on
+ - ramp-down-us - The Run time ramp rates/step are from one current
+ set-point to another after the device has reached its
+ initial target set point from turn-on
+ Range for ramp settings: 8us - 65536us
+
+Optional properties if ALS mode is used:
+ - ti,als-vmin - Minimum ALS voltage defined in Volts
+ - ti,als-vmax - Maximum ALS voltage defined in Volts
+ Per the data sheet the max ALS voltage is 2V and the min is 0V
+
+ - ti,als1-imp-sel - ALS1 impedance resistor selection in Ohms
+ - ti,als2-imp-sel - ALS2 impedance resistor selection in Ohms
+ Range for impedance select: 37000 Ohms - 1190 Ohms
+ Values above 37kohms will be set to the "High Impedance" setting
+
+ - ti,als-avrg-time-us - Determines the length of time the device needs to
+ average the two ALS inputs. This is only used if
+ the input mode is LM3532_ALS_INPUT_AVRG.
+ Range: 17920us - 2293760us
+ - ti,als-input-mode - Determines how the device uses the attached ALS
+ devices.
+ 0x00 - ALS1 and ALS2 input average
+ 0x01 - ALS1 Input
+ 0x02 - ALS2 Input
+ 0x03 - Max of ALS1 and ALS2
+
+Required child properties:
+ - reg : Indicates control bank the LED string is controlled by
+ - led-sources : see Documentation/devicetree/bindings/leds/common.txt
+ - ti,led-mode : Defines if the LED strings are manually controlled or
+ if the LED strings are controlled by the ALS.
+ 0x00 - LED strings are I2C controlled via full scale
+ brightness control register
+ 0x01 - LED strings are ALS controlled
+
+Optional LED child properties:
+ - label : see Documentation/devicetree/bindings/leds/common.txt
+ - linux,default-trigger :
+ see Documentation/devicetree/bindings/leds/common.txt
+ - led-max-microamp : Defines the full scale current value for each control
+ bank. The range is from 5000uA-29800uA in increments
+ of 800uA.
+
+Example:
+led-controller@38 {
+ compatible = "ti,lm3532";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x38>;
+
+ enable-gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+ ramp-up-us = <1024>;
+ ramp-down-us = <65536>;
+
+ ti,als-vmin = <0>;
+ ti,als-vmax = <2000>;
+ ti,als1-imp-sel = <4110>;
+ ti,als2-imp-sel = <2180>;
+ ti,als-avrg-time-us = <17920>;
+ ti,als-input-mode = <0x00>;
+
+ led@0 {
+ reg = <0>;
+ led-sources = <2>;
+ ti,led-mode = <1>;
+ led-max-microamp = <21800>;
+ label = ":backlight";
+ linux,default-trigger = "backlight";
+ };
+
+ led@1 {
+ reg = <1>;
+ led-sources = <1>;
+ ti,led-mode = <0>;
+ label = ":kbd_backlight";
+ };
+};
+
+For more product information please see the links below:
+https://www.ti.com/product/LM3532
diff --git a/Documentation/devicetree/bindings/leds/leds-lm3601x.txt b/Documentation/devicetree/bindings/leds/leds-lm3601x.txt
new file mode 100644
index 000000000..17e940025
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lm3601x.txt
@@ -0,0 +1,51 @@
+* Texas Instruments - lm3601x Single-LED Flash Driver
+
+The LM3601X are ultra-small LED flash drivers that
+provide a high level of adjustability.
+
+Required properties:
+ - compatible : Can be one of the following
+ "ti,lm36010"
+ "ti,lm36011"
+ - reg : I2C slave address
+ - #address-cells : 1
+ - #size-cells : 0
+
+Required child properties:
+ - reg : 0 - Indicates a IR mode
+ 1 - Indicates a Torch (white LED) mode
+
+Required properties for flash LED child nodes:
+ See Documentation/devicetree/bindings/leds/common.txt
+ - flash-max-microamp : Range from 11mA - 1.5A
+ - flash-max-timeout-us : Range from 40ms - 1600ms
+ - led-max-microamp : Range from 2.4mA - 376mA
+
+Optional child properties:
+ - function : see Documentation/devicetree/bindings/leds/common.txt
+ - color : see Documentation/devicetree/bindings/leds/common.txt
+ - label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
+
+Example:
+
+#include <dt-bindings/leds/common.h>
+
+led-controller@64 {
+ compatible = "ti,lm36010";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x64>;
+
+ led@0 {
+ reg = <1>;
+ function = LED_FUNCTION_TORCH;
+ color = <LED_COLOR_ID_WHITE>;
+ led-max-microamp = <376000>;
+ flash-max-microamp = <1500000>;
+ flash-max-timeout-us = <1600000>;
+ };
+}
+
+For more product information please see the links below:
+https://www.ti.com/product/LM36010
+https://www.ti.com/product/LM36011
diff --git a/Documentation/devicetree/bindings/leds/leds-lm36274.txt b/Documentation/devicetree/bindings/leds/leds-lm36274.txt
new file mode 100644
index 000000000..de6f4931f
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lm36274.txt
@@ -0,0 +1,85 @@
+* Texas Instruments LM36274 4-Channel LCD Backlight Driver w/Integrated Bias
+
+The LM36274 is an integrated four-channel WLED driver and LCD bias supply.
+The backlight boost provides the power to bias four parallel LED strings with
+up to 29V total output voltage. The 11-bit LED current is programmable via
+the I2C bus and/or controlled via a logic level PWM input from 60 uA to 30 mA.
+
+Parent device properties are documented in
+Documentation/devicetree/bindings/mfd/ti-lmu.txt
+
+Regulator properties are documented in
+Documentation/devicetree/bindings/regulator/lm363x-regulator.txt
+
+Required backlight properties:
+ - compatible:
+ "ti,lm36274-backlight"
+ - reg : 0
+ - #address-cells : 1
+ - #size-cells : 0
+ - led-sources : Indicates which LED strings will be enabled.
+ Values from 0-3, sources is 0 based so strings will be
+ source value + 1.
+
+Optional backlight properties:
+ - label : see Documentation/devicetree/bindings/leds/common.txt
+ - linux,default-trigger :
+ see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+HVLED string 1 and 3 are controlled by control bank A and HVLED 2 string is
+controlled by control bank B.
+
+lm36274@11 {
+ compatible = "ti,lm36274";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x11>;
+
+ enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+
+ regulators {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,lm363x-regulator";
+
+ enable-gpios = <&pioC 0 GPIO_ACTIVE_HIGH>,
+ <&pioC 1 GPIO_ACTIVE_HIGH>;
+
+ vboost {
+ regulator-name = "lcd_boost";
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <7150000>;
+ regulator-always-on;
+ };
+
+ vpos {
+ regulator-name = "lcd_vpos";
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <6500000>;
+ };
+
+ vneg {
+ regulator-name = "lcd_vneg";
+ regulator-min-microvolt = <4000000>;
+ regulator-max-microvolt = <6500000>;
+ };
+ };
+
+ backlight {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,lm36274-backlight";
+
+ led@0 {
+ reg = <0>;
+ led-sources = <0 2>;
+ label = "white:backlight_cluster";
+ linux,default-trigger = "backlight";
+ };
+ };
+};
+
+For more product information please see the link below:
+https://www.ti.com/lit/ds/symlink/lm36274.pdf
diff --git a/Documentation/devicetree/bindings/leds/leds-lm3692x.txt b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
new file mode 100644
index 000000000..b1103d961
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lm3692x.txt
@@ -0,0 +1,65 @@
+* Texas Instruments - LM3692x Highly Efficient White LED Driver
+
+The LM3692x is an ultra-compact, highly efficient,
+white-LED driver designed for LCD display backlighting.
+
+The main difference between the LM36922 and LM36923 is the number of
+LED strings it supports. The LM36922 supports two strings while the LM36923
+supports three strings.
+
+Required properties:
+ - compatible:
+ "ti,lm36922"
+ "ti,lm36923"
+ - reg : I2C slave address
+ - #address-cells : 1
+ - #size-cells : 0
+
+Optional properties:
+ - enable-gpios : gpio pin to enable/disable the device.
+ - vled-supply : LED supply
+ - ti,ovp-microvolt: Overvoltage protection in
+ micro-volt, can be 17000000, 21000000, 25000000 or
+ 29000000. If ti,ovp-microvolt is not specified it
+ defaults to 29000000.
+
+Required child properties:
+ - reg : 0 - Will enable all LED sync paths
+ 1 - Will enable the LED1 sync
+ 2 - Will enable the LED2 sync
+ 3 - Will enable the LED3 sync (LM36923 only)
+
+Optional child properties:
+ - function : see Documentation/devicetree/bindings/leds/common.txt
+ - color : see Documentation/devicetree/bindings/leds/common.txt
+ - label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
+ - linux,default-trigger :
+ see Documentation/devicetree/bindings/leds/common.txt
+ - led-max-microamp :
+ see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+#include <dt-bindings/leds/common.h>
+
+led-controller@36 {
+ compatible = "ti,lm3692x";
+ reg = <0x36>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ vled-supply = <&vbatt>;
+ ti,ovp-microvolt = <29000000>;
+
+ led@0 {
+ reg = <0>;
+ function = LED_FUNCTION_BACKLIGHT;
+ color = <LED_COLOR_ID_WHITE>;
+ linux,default-trigger = "backlight";
+ led-max-microamp = <20000>;
+ };
+}
+
+For more product information please see the link below:
+https://www.ti.com/lit/ds/snvsa29/snvsa29.pdf
diff --git a/Documentation/devicetree/bindings/leds/leds-lm3697.txt b/Documentation/devicetree/bindings/leds/leds-lm3697.txt
new file mode 100644
index 000000000..221b37b60
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lm3697.txt
@@ -0,0 +1,73 @@
+* Texas Instruments - LM3697 Highly Efficient White LED Driver
+
+The LM3697 11-bit LED driver provides high-
+performance backlight dimming for 1, 2, or 3 series
+LED strings while delivering up to 90% efficiency.
+
+This device is suitable for display and keypad lighting
+
+Required properties:
+ - compatible:
+ "ti,lm3697"
+ - reg : I2C slave address
+ - #address-cells : 1
+ - #size-cells : 0
+
+Optional properties:
+ - enable-gpios : GPIO pin to enable/disable the device
+ - vled-supply : LED supply
+
+Required child properties:
+ - reg : 0 - LED is Controlled by bank A
+ 1 - LED is Controlled by bank B
+ - led-sources : Indicates which HVLED string is associated to which
+ control bank. This is a zero based property so
+ HVLED1 = 0, HVLED2 = 1, HVLED3 = 2.
+ Additional information is contained
+ in Documentation/devicetree/bindings/leds/common.txt
+
+Optional child properties:
+ - ti,brightness-resolution - see Documentation/devicetree/bindings/mfd/ti-lmu.txt
+ - ramp-up-us: see Documentation/devicetree/bindings/mfd/ti-lmu.txt
+ - ramp-down-us: see Documentation/devicetree/bindings/mfd/ti-lmu.txt
+ - label : see Documentation/devicetree/bindings/leds/common.txt
+ - linux,default-trigger :
+ see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+HVLED string 1 and 3 are controlled by control bank A and HVLED 2 string is
+controlled by control bank B.
+
+led-controller@36 {
+ compatible = "ti,lm3697";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x36>;
+
+ enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ vled-supply = <&vbatt>;
+
+ led@0 {
+ reg = <0>;
+ led-sources = <0 2>;
+ ti,brightness-resolution = <2047>;
+ ramp-up-us = <5000>;
+ ramp-down-us = <1000>;
+ label = "white:first_backlight_cluster";
+ linux,default-trigger = "backlight";
+ };
+
+ led@1 {
+ reg = <1>;
+ led-sources = <1>;
+ ti,brightness-resolution = <255>;
+ ramp-up-us = <500>;
+ ramp-down-us = <1000>;
+ label = "white:second_backlight_cluster";
+ linux,default-trigger = "backlight";
+ };
+}
+
+For more product information please see the link below:
+https://www.ti.com/lit/ds/symlink/lm3697.pdf
diff --git a/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
new file mode 100644
index 000000000..c192b5fea
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lp50xx.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-lp50xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LED driver for LP50XX RGB LED from Texas Instruments.
+
+maintainers:
+ - Dan Murphy <dmurphy@ti.com>
+
+description: |
+ The LP50XX is multi-channel, I2C RGB LED Drivers that can group RGB LEDs into
+ a LED group or control them individually.
+
+ The difference in these RGB LED drivers is the number of supported RGB
+ modules.
+
+ For more product information please see the link below:
+ https://www.ti.com/lit/ds/symlink/lp5012.pdf
+ https://www.ti.com/lit/ds/symlink/lp5024.pdf
+ https://www.ti.com/lit/ds/symlink/lp5036.pdf
+
+properties:
+ compatible:
+ enum:
+ - ti,lp5009
+ - ti,lp5012
+ - ti,lp5018
+ - ti,lp5024
+ - ti,lp5030
+ - ti,lp5036
+
+ reg:
+ maxItems: 1
+ description:
+ I2C slave address
+ lp5009/12 - 0x14, 0x15, 0x16, 0x17
+ lp5018/24 - 0x28, 0x29, 0x2a, 0x2b
+ lp5030/36 - 0x30, 0x31, 0x32, 0x33
+
+ enable-gpios:
+ maxItems: 1
+ description: GPIO pin to enable/disable the device.
+
+ vled-supply:
+ description: LED supply.
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ '^multi-led@[0-9a-f]$':
+ type: object
+ allOf:
+ - $ref: leds-class-multicolor.yaml#
+ properties:
+ reg:
+ minItems: 1
+ maxItems: 12
+ description:
+ This property denotes the LED module number(s) that is used on the
+ for the child node. The LED modules can either be used stand alone
+ or grouped into a module bank.
+
+ patternProperties:
+ "(^led-[0-9a-f]$|led)":
+ type: object
+ $ref: common.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/leds/common.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led-controller@14 {
+ compatible = "ti,lp5009";
+ reg = <0x14>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-gpios = <&gpio1 16>;
+
+ multi-led@1 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x1>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_CHARGING;
+
+ led-0 {
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led-1 {
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led-2 {
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+
+ multi-led@2 {
+ #address-cells = <1>;
+ #size-cells = <2>;
+ reg = <0x2 0x3 0x5>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STANDBY;
+
+ led-6 {
+ color = <LED_COLOR_ID_RED>;
+ };
+
+ led-7 {
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led-8 {
+ color = <LED_COLOR_ID_BLUE>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
new file mode 100644
index 000000000..58e974793
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lp55xx.yaml
@@ -0,0 +1,228 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-lp55xx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TI/National Semiconductor LP55xx and LP8501 LED Drivers
+
+maintainers:
+ - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+ - Pavel Machek <pavel@ucw.cz>
+
+description: |
+ Bindings for the TI/National Semiconductor LP55xx and LP8501 multi channel
+ LED Drivers.
+
+ For more product information please see the link below:
+ https://www.ti.com/lit/gpn/lp5521
+ https://www.ti.com/lit/gpn/lp5523
+ https://www.ti.com/lit/gpn/lp55231
+ https://www.ti.com/lit/gpn/lp5562
+ https://www.ti.com/lit/gpn/lp8501
+
+properties:
+ compatible:
+ enum:
+ - national,lp5521
+ - national,lp5523
+ - ti,lp55231
+ - ti,lp5562
+ - ti,lp8501
+
+ reg:
+ maxItems: 1
+ description: I2C slave address
+
+ clock-mode:
+ $ref: /schemas/types.yaml#definitions/uint8
+ description: |
+ Input clock mode
+ enum:
+ - 0 # automode
+ - 1 # internal
+ - 2 # external
+
+ enable-gpio:
+ maxItems: 1
+ description: |
+ GPIO attached to the chip's enable pin
+
+ pwr-sel:
+ $ref: /schemas/types.yaml#definitions/uint8
+ description: |
+ LP8501 specific property. Power selection for output channels.
+ enum:
+ - 0 # D1~9 are connected to VDD
+ - 1 # D1~6 with VDD, D7~9 with VOUT
+ - 2 # D1~6 with VOUT, D7~9 with VDD
+ - 3 # D1~9 are connected to VOUT
+
+ '#address-cells':
+ const: 1
+
+ '#size-cells':
+ const: 0
+
+patternProperties:
+ "(^led@[0-9a-f]$|led)":
+ type: object
+ $ref: common.yaml#
+ properties:
+ led-cur:
+ $ref: /schemas/types.yaml#definitions/uint8
+ description: |
+ Current setting at each LED channel (mA x10, 0 if LED is not connected)
+ minimum: 0
+ maximum: 255
+
+ max-cur:
+ $ref: /schemas/types.yaml#definitions/uint8
+ description: Maximun current at each LED channel.
+
+ reg:
+ description: |
+ Output channel for the LED. This is zero based channel identifier and
+ the data sheet is a one based channel identifier.
+ reg value to output to LED output number
+ enum:
+ - 0 # LED output D1
+ - 1 # LED output D2
+ - 2 # LED output D3
+ - 3 # LED output D4
+ - 4 # LED output D5
+ - 5 # LED output D6
+ - 6 # LED output D7
+ - 7 # LED output D8
+ - 8 # LED output D9
+
+ chan-name:
+ $ref: /schemas/types.yaml#definitions/string
+ description: name of channel
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/leds/common.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led-controller@32 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,lp8501";
+ reg = <0x32>;
+ clock-mode = /bits/ 8 <2>;
+ pwr-sel = /bits/ 8 <3>; /* D1~9 connected to VOUT */
+
+ led@0 {
+ reg = <0>;
+ chan-name = "d1";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@1 {
+ reg = <1>;
+ chan-name = "d2";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@2 {
+ reg = <2>;
+ chan-name = "d3";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@3 {
+ reg = <3>;
+ chan-name = "d4";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@4 {
+ reg = <4>;
+ chan-name = "d5";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@5 {
+ reg = <5>;
+ chan-name = "d6";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@6 {
+ reg = <6>;
+ chan-name = "d7";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@7 {
+ reg = <7>;
+ chan-name = "d8";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+
+ led@8 {
+ reg = <8>;
+ chan-name = "d9";
+ led-cur = /bits/ 8 <0x14>;
+ max-cur = /bits/ 8 <0x20>;
+ };
+ };
+
+ led-controller@33 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "national,lp5523";
+ reg = <0x33>;
+ clock-mode = /bits/ 8 <0>;
+
+ multi-led@2 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2>;
+ color = <LED_COLOR_ID_RGB>;
+ function = LED_FUNCTION_STANDBY;
+ linux,default-trigger = "heartbeat";
+
+ led@0 {
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x0>;
+ color = <LED_COLOR_ID_GREEN>;
+ };
+
+ led@1 {
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x1>;
+ color = <LED_COLOR_ID_BLUE>;
+ };
+
+ led@6 {
+ led-cur = /bits/ 8 <50>;
+ max-cur = /bits/ 8 <100>;
+ reg = <0x6>;
+ color = <LED_COLOR_ID_RED>;
+ };
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-lp8860.txt b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
new file mode 100644
index 000000000..8bb25749a
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lp8860.txt
@@ -0,0 +1,50 @@
+* Texas Instruments - lp8860 4-Channel LED Driver
+
+The LP8860-Q1 is an high-efficiency LED
+driver with boost controller. It has 4 high-precision
+current sinks that can be controlled by a PWM input
+signal, a SPI/I2C master, or both.
+
+Required properties:
+ - compatible :
+ "ti,lp8860"
+ - reg : I2C slave address
+ - #address-cells : 1
+ - #size-cells : 0
+
+Optional properties:
+ - enable-gpios : gpio pin to enable (active high)/disable the device.
+ - vled-supply : LED supply
+
+Required child properties:
+ - reg : 0
+
+Optional child properties:
+ - function : see Documentation/devicetree/bindings/leds/common.txt
+ - color : see Documentation/devicetree/bindings/leds/common.txt
+ - label : see Documentation/devicetree/bindings/leds/common.txt (deprecated)
+ - linux,default-trigger :
+ see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+#include <dt-bindings/leds/common.h>
+
+led-controller@2d {
+ compatible = "ti,lp8860";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x2d>;
+ enable-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+ vled-supply = <&vbatt>;
+
+ led@0 {
+ reg = <0>;
+ function = LED_FUNCTION_BACKLIGHT;
+ color = <LED_COLOR_ID_WHITE>;
+ linux,default-trigger = "backlight";
+ };
+}
+
+For more product information please see the link below:
+https://www.ti.com/product/lp8860-q1
diff --git a/Documentation/devicetree/bindings/leds/leds-lt3593.txt b/Documentation/devicetree/bindings/leds/leds-lt3593.txt
new file mode 100644
index 000000000..24eccdaa6
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-lt3593.txt
@@ -0,0 +1,37 @@
+Bindings for Linear Technologies LT3593 LED controller
+
+Required properties:
+- compatible: Should be "lltc,lt3593".
+- lltc,ctrl-gpios: A handle to the GPIO that is connected to the 'CTRL'
+ pin of the chip.
+
+The hardware supports only one LED. The properties of this LED are
+configured in a sub-node in the device node.
+
+Optional sub-node properties:
+- function: See Documentation/devicetree/bindings/leds/common.txt
+- color: See Documentation/devicetree/bindings/leds/common.txt
+- label: A label for the LED. If none is given, the LED will be
+ named "lt3595::" (deprecated)
+- linux,default-trigger: The default trigger for the LED.
+ See Documentation/devicetree/bindings/leds/common.txt
+- default-state: The initial state of the LED.
+ See Documentation/devicetree/bindings/leds/common.txt
+
+If multiple chips of this type are found in a design, each one needs to
+be handled by its own device node.
+
+Example:
+
+#include <dt-bindings/leds/common.h>
+
+led-controller {
+ compatible = "lltc,lt3593";
+ lltc,ctrl-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+
+ led {
+ function = LED_FUNCTION_BACKLIGHT;
+ color = <LED_COLOR_ID_WHITE>;
+ default-state = "on";
+ };
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-max77650.yaml b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
new file mode 100644
index 000000000..c6f96cabd
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-max77650.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-max77650.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LED driver for MAX77650 PMIC from Maxim Integrated.
+
+maintainers:
+ - Bartosz Golaszewski <bgolaszewski@baylibre.com>
+
+description: |
+ This module is part of the MAX77650 MFD device. For more details
+ see Documentation/devicetree/bindings/mfd/max77650.yaml.
+
+ The LED controller is represented as a sub-node of the PMIC node on
+ the device tree.
+
+ This device has three current sinks.
+
+properties:
+ compatible:
+ const: maxim,max77650-led
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+patternProperties:
+ "^led@[0-2]$":
+ type: object
+ description: |
+ Properties for a single LED.
+
+ properties:
+ reg:
+ description:
+ Index of the LED.
+ minimum: 0
+ maximum: 2
+
+ label: true
+
+ linux,default-trigger: true
+
+required:
+ - compatible
+ - "#address-cells"
+ - "#size-cells"
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/leds/leds-mt6323.txt b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
new file mode 100644
index 000000000..45bf9f7d8
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-mt6323.txt
@@ -0,0 +1,60 @@
+Device Tree Bindings for LED support on MT6323 PMIC
+
+MT6323 LED controller is subfunction provided by MT6323 PMIC, so the LED
+controllers are defined as the subnode of the function node provided by MT6323
+PMIC controller that is being defined as one kind of Muti-Function Device (MFD)
+using shared bus called PMIC wrapper for each subfunction to access remote
+MT6323 PMIC hardware.
+
+For MT6323 MFD bindings see:
+Documentation/devicetree/bindings/mfd/mt6397.txt
+For MediaTek PMIC wrapper bindings see:
+Documentation/devicetree/bindings/soc/mediatek/pwrap.txt
+
+Required properties:
+- compatible : Must be "mediatek,mt6323-led"
+- address-cells : Must be 1
+- size-cells : Must be 0
+
+Each led is represented as a child node of the mediatek,mt6323-led that
+describes the initial behavior for each LED physically and currently only four
+LED child nodes can be supported.
+
+Required properties for the LED child node:
+- reg : LED channel number (0..3)
+
+Optional properties for the LED child node:
+- label : See Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : See Documentation/devicetree/bindings/leds/common.txt
+- default-state: See Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+ mt6323: pmic {
+ compatible = "mediatek,mt6323";
+
+ ...
+
+ mt6323led: leds {
+ compatible = "mediatek,mt6323-led";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ label = "LED0";
+ linux,default-trigger = "timer";
+ default-state = "on";
+ };
+ led@1 {
+ reg = <1>;
+ label = "LED1";
+ default-state = "off";
+ };
+ led@2 {
+ reg = <2>;
+ label = "LED2";
+ default-state = "on";
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/leds/leds-netxbig.txt b/Documentation/devicetree/bindings/leds/leds-netxbig.txt
new file mode 100644
index 000000000..5ef92a26d
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-netxbig.txt
@@ -0,0 +1,92 @@
+Binding for the CPLD LEDs (GPIO extension bus) found on some LaCie/Seagate
+boards (Example: 2Big/5Big Network v2, 2Big NAS).
+
+Required properties:
+- compatible: "lacie,netxbig-leds".
+- gpio-ext: Phandle for the gpio-ext bus.
+
+Optional properties:
+- timers: Timer array. Each timer entry is represented by three integers:
+ Mode (gpio-ext bus), delay_on and delay_off.
+
+Each LED is represented as a sub-node of the netxbig-leds device.
+
+Required sub-node properties:
+- mode-addr: Mode register address on gpio-ext bus.
+- mode-val: Mode to value mapping. Each entry is represented by two integers:
+ A mode and the corresponding value on the gpio-ext bus.
+- bright-addr: Brightness register address on gpio-ext bus.
+- max-brightness: Maximum brightness value.
+
+Optional sub-node properties:
+- label: Name for this LED. If omitted, the label is taken from the node name.
+- linux,default-trigger: Trigger assigned to the LED.
+
+Example:
+
+netxbig-leds {
+ compatible = "lacie,netxbig-leds";
+
+ gpio-ext = &gpio_ext;
+
+ timers = <NETXBIG_LED_TIMER1 500 500
+ NETXBIG_LED_TIMER2 500 1000>;
+
+ blue-power {
+ label = "netxbig:blue:power";
+ mode-addr = <0>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 1
+ NETXBIG_LED_TIMER1 3
+ NETXBIG_LED_TIMER2 7>;
+ bright-addr = <1>;
+ max-brightness = <7>;
+ };
+ red-power {
+ label = "netxbig:red:power";
+ mode-addr = <0>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <1>;
+ max-brightness = <7>;
+ };
+ blue-sata0 {
+ label = "netxbig:blue:sata0";
+ mode-addr = <3>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ max-brightness = <7>;
+ };
+ red-sata0 {
+ label = "netxbig:red:sata0";
+ mode-addr = <3>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ max-brightness = <7>;
+ };
+ blue-sata1 {
+ label = "netxbig:blue:sata1";
+ mode-addr = <4>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 7
+ NETXBIG_LED_SATA 1
+ NETXBIG_LED_TIMER1 3>;
+ bright-addr = <2>;
+ max-brightness = <7>;
+ };
+ red-sata1 {
+ label = "netxbig:red:sata1";
+ mode-addr = <4>;
+ mode-val = <NETXBIG_LED_OFF 0
+ NETXBIG_LED_ON 2
+ NETXBIG_LED_TIMER1 4>;
+ bright-addr = <2>;
+ max-brightness = <7>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-ns2.txt b/Documentation/devicetree/bindings/leds/leds-ns2.txt
new file mode 100644
index 000000000..9f81258a5
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-ns2.txt
@@ -0,0 +1,35 @@
+Binding for dual-GPIO LED found on Network Space v2 (and parents).
+
+Required properties:
+- compatible: "lacie,ns2-leds".
+
+Each LED is represented as a sub-node of the ns2-leds device.
+
+Required sub-node properties:
+- cmd-gpio: Command LED GPIO. See OF device-tree GPIO specification.
+- slow-gpio: Slow LED GPIO. See OF device-tree GPIO specification.
+- modes-map: A mapping between LED modes (off, on or SATA activity blinking) and
+ the corresponding cmd-gpio/slow-gpio values. All the GPIO values combinations
+ should be given in order to avoid having an unknown mode at driver probe time.
+
+Optional sub-node properties:
+- label: Name for this LED. If omitted, the label is taken from the node name.
+- linux,default-trigger: Trigger assigned to the LED.
+
+Example:
+
+#include <dt-bindings/leds/leds-ns2.h>
+
+ns2-leds {
+ compatible = "lacie,ns2-leds";
+
+ blue-sata {
+ label = "ns2:blue:sata";
+ slow-gpio = <&gpio0 29 0>;
+ cmd-gpio = <&gpio0 30 0>;
+ modes-map = <NS_V2_LED_OFF 0 1
+ NS_V2_LED_ON 1 0
+ NS_V2_LED_ON 0 0
+ NS_V2_LED_SATA 1 1>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-pca9532.txt b/Documentation/devicetree/bindings/leds/leds-pca9532.txt
new file mode 100644
index 000000000..f769c52e3
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-pca9532.txt
@@ -0,0 +1,49 @@
+*NXP - pca9532 PWM LED Driver
+
+The PCA9532 family is SMBus I/O expander optimized for dimming LEDs.
+The PWM support 256 steps.
+
+Required properties:
+ - compatible:
+ "nxp,pca9530"
+ "nxp,pca9531"
+ "nxp,pca9532"
+ "nxp,pca9533"
+ - reg - I2C slave address
+
+Each led is represented as a sub-node of the nxp,pca9530.
+
+Optional sub-node properties:
+ - label: see Documentation/devicetree/bindings/leds/common.txt
+ - type: Output configuration, see dt-bindings/leds/leds-pca9532.h (default NONE)
+ - linux,default-trigger: see Documentation/devicetree/bindings/leds/common.txt
+ - default-state: see Documentation/devicetree/bindings/leds/common.txt
+ This property is only valid for sub-nodes of type <PCA9532_TYPE_LED>.
+
+Example:
+ #include <dt-bindings/leds/leds-pca9532.h>
+
+ leds: pca9530@60 {
+ compatible = "nxp,pca9530";
+ reg = <0x60>;
+
+ red-power {
+ label = "pca:red:power";
+ type = <PCA9532_TYPE_LED>;
+ };
+ green-power {
+ label = "pca:green:power";
+ type = <PCA9532_TYPE_LED>;
+ };
+ kernel-booting {
+ type = <PCA9532_TYPE_LED>;
+ default-state = "on";
+ };
+ sys-stat {
+ type = <PCA9532_TYPE_LED>;
+ default-state = "keep"; // don't touch, was set by U-Boot
+ };
+ };
+
+For more product information please see the link below:
+http://nxp.com/documents/data_sheet/PCA9532.pdf
diff --git a/Documentation/devicetree/bindings/leds/leds-pca955x.txt b/Documentation/devicetree/bindings/leds/leds-pca955x.txt
new file mode 100644
index 000000000..817f460f3
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-pca955x.txt
@@ -0,0 +1,89 @@
+* NXP - pca955x LED driver
+
+The PCA955x family of chips are I2C LED blinkers whose pins not used
+to control LEDs can be used as general purpose I/Os. The GPIO pins can
+be input or output, and output pins can also be pulse-width controlled.
+
+Required properties:
+- compatible : should be one of :
+ "nxp,pca9550"
+ "nxp,pca9551"
+ "nxp,pca9552"
+ "ibm,pca9552"
+ "nxp,pca9553"
+- #address-cells: must be 1
+- #size-cells: must be 0
+- reg: I2C slave address. depends on the model.
+
+Optional properties:
+- gpio-controller: allows pins to be used as GPIOs.
+- #gpio-cells: must be 2.
+- gpio-line-names: define the names of the GPIO lines
+
+LED sub-node properties:
+- reg : number of LED line.
+ from 0 to 1 for the pca9550
+ from 0 to 7 for the pca9551
+ from 0 to 15 for the pca9552
+ from 0 to 3 for the pca9553
+- type: (optional) either
+ PCA955X_TYPE_NONE
+ PCA955X_TYPE_LED
+ PCA955X_TYPE_GPIO
+ see dt-bindings/leds/leds-pca955x.h (default to LED)
+- label : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+
+Examples:
+
+pca9552: pca9552@60 {
+ compatible = "nxp,pca9552";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x60>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-line-names = "GPIO12", "GPIO13", "GPIO14", "GPIO15";
+
+ gpio@12 {
+ reg = <12>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@13 {
+ reg = <13>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@14 {
+ reg = <14>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+ gpio@15 {
+ reg = <15>;
+ type = <PCA955X_TYPE_GPIO>;
+ };
+
+ led@0 {
+ label = "red:power";
+ linux,default-trigger = "default-on";
+ reg = <0>;
+ type = <PCA955X_TYPE_LED>;
+ };
+ led@1 {
+ label = "green:power";
+ reg = <1>;
+ type = <PCA955X_TYPE_LED>;
+ };
+ led@2 {
+ label = "pca9552:yellow";
+ reg = <2>;
+ type = <PCA955X_TYPE_LED>;
+ };
+ led@3 {
+ label = "pca9552:white";
+ reg = <3>;
+ type = <PCA955X_TYPE_LED>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-pm8058.txt b/Documentation/devicetree/bindings/leds/leds-pm8058.txt
new file mode 100644
index 000000000..89584c49a
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-pm8058.txt
@@ -0,0 +1,67 @@
+Qualcomm PM8058 LED driver
+
+The Qualcomm PM8058 is a multi-functional device which contains
+an LED driver block for up to six LEDs: three normal LEDs, two
+"flash" LEDs and one "keypad backlight" LED. The names are
+quoted because sometimes these LED drivers are used for wildly
+different things than flash or keypad backlight: their names
+are more of a suggestion than a hard-wired usecase.
+
+Hardware-wise the different LEDs support slightly different
+output currents. The "flash" LEDs do not need to charge nor
+do they support external triggers. They are just powerful LED
+drivers.
+
+The LEDs appear as children to the PM8058 device, with the
+proper compatible string. For the PM8058 bindings see:
+mfd/qcom-pm8xxx.txt.
+
+Each LED is represented as a sub-node of the syscon device. Each
+node's name represents the name of the corresponding LED.
+
+LED sub-node properties:
+
+Required properties:
+- compatible: one of
+ "qcom,pm8058-led" (for the normal LEDs at 0x131, 0x132 and 0x133)
+ "qcom,pm8058-keypad-led" (for the "keypad" LED at 0x48)
+ "qcom,pm8058-flash-led" (for the "flash" LEDs at 0x49 and 0xFB)
+
+Optional properties:
+- label: see Documentation/devicetree/bindings/leds/common.txt
+- default-state: see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger: see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+qcom,ssbi@500000 {
+ pmicintc: pmic@0 {
+ compatible = "qcom,pm8058";
+ led@48 {
+ compatible = "qcom,pm8058-keypad-led";
+ reg = <0x48>;
+ label = "pm8050:white:keypad";
+ default-state = "off";
+ };
+ led@131 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x131>;
+ label = "pm8058:red";
+ default-state = "off";
+ };
+ led@132 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x132>;
+ label = "pm8058:yellow";
+ default-state = "off";
+ linux,default-trigger = "mmc0";
+ };
+ led@133 {
+ compatible = "qcom,pm8058-led";
+ reg = <0x133>;
+ label = "pm8058:green";
+ default-state = "on";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-powernv.txt b/Documentation/devicetree/bindings/leds/leds-powernv.txt
new file mode 100644
index 000000000..66655690f
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-powernv.txt
@@ -0,0 +1,26 @@
+Device Tree binding for LEDs on IBM Power Systems
+-------------------------------------------------
+
+Required properties:
+- compatible : Should be "ibm,opal-v3-led".
+- led-mode : Should be "lightpath" or "guidinglight".
+
+Each location code of FRU/Enclosure must be expressed in the
+form of a sub-node.
+
+Required properties for the sub nodes:
+- led-types : Supported LED types (attention/identify/fault) provided
+ in the form of string array.
+
+Example:
+
+leds {
+ compatible = "ibm,opal-v3-led";
+ led-mode = "lightpath";
+
+ U78C9.001.RST0027-P1-C1 {
+ led-types = "identify", "fault";
+ };
+ ...
+ ...
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.txt b/Documentation/devicetree/bindings/leds/leds-pwm.txt
new file mode 100644
index 000000000..6c6583c35
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-pwm.txt
@@ -0,0 +1,50 @@
+LED connected to PWM
+
+Required properties:
+- compatible : should be "pwm-leds".
+
+Each LED is represented as a sub-node of the pwm-leds device. Each
+node's name represents the name of the corresponding LED.
+
+LED sub-node properties:
+- pwms : PWM property to point to the PWM device (phandle)/port (id) and to
+ specify the period time to be used: <&phandle id period_ns>;
+- pwm-names : (optional) Name to be used by the PWM subsystem for the PWM device
+ For the pwms and pwm-names property please refer to:
+ Documentation/devicetree/bindings/pwm/pwm.txt
+- max-brightness : Maximum brightness possible for the LED
+- active-low : (optional) For PWMs where the LED is wired to supply
+ rather than ground.
+- label : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+twl_pwm: pwm {
+ /* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
+ compatible = "ti,twl6030-pwm";
+ #pwm-cells = <2>;
+};
+
+twl_pwmled: pwmled {
+ /* provides one PWM (id 0 for Charing indicator LED) */
+ compatible = "ti,twl6030-pwmled";
+ #pwm-cells = <2>;
+};
+
+pwmleds {
+ compatible = "pwm-leds";
+ kpad {
+ label = "omap4::keypad";
+ pwms = <&twl_pwm 0 7812500>;
+ max-brightness = <127>;
+ };
+
+ charging {
+ label = "omap4:green:chrg";
+ pwms = <&twl_pwmled 0 7812500>;
+ max-brightness = <255>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt b/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt
new file mode 100644
index 000000000..df2b4e1c4
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-sc27xx-bltc.txt
@@ -0,0 +1,43 @@
+LEDs connected to Spreadtrum SC27XX PMIC breathing light controller
+
+The SC27xx breathing light controller supports to 3 outputs:
+red LED, green LED and blue LED. Each LED can work at normal
+PWM mode or breath light mode.
+
+Required properties:
+- compatible: Should be "sprd,sc2731-bltc".
+- #address-cells: Must be 1.
+- #size-cells: Must be 0.
+- reg: Specify the controller address.
+
+Required child properties:
+- reg: Port this LED is connected to.
+
+Optional child properties:
+- function: See Documentation/devicetree/bindings/leds/common.txt.
+- color: See Documentation/devicetree/bindings/leds/common.txt.
+- label: See Documentation/devicetree/bindings/leds/common.txt (deprecated).
+
+Examples:
+
+led-controller@200 {
+ compatible = "sprd,sc2731-bltc";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x200>;
+
+ led@0 {
+ color = <LED_COLOR_ID_RED>;
+ reg = <0x0>;
+ };
+
+ led@1 {
+ color = <LED_COLOR_ID_GREEN>;
+ reg = <0x1>;
+ };
+
+ led@2 {
+ color = <LED_COLOR_ID_BLUE>;
+ reg = <0x2>;
+ };
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
new file mode 100644
index 000000000..f68259619
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-sgm3140.yaml
@@ -0,0 +1,61 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-sgm3140.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SGMICRO SGM3140 500mA Buck/Boost Charge Pump LED Driver
+
+maintainers:
+ - Luca Weiss <luca@z3ntu.xyz>
+
+description: |
+ The SGM3140 is a current-regulated charge pump which can regulate two current
+ levels for Flash and Torch modes.
+
+ The data sheet can be found at:
+ http://www.sg-micro.com/uploads/soft/20190626/1561535688.pdf
+
+properties:
+ compatible:
+ const: sgmicro,sgm3140
+
+ enable-gpios:
+ maxItems: 1
+ description: A connection to the 'EN' pin.
+
+ flash-gpios:
+ maxItems: 1
+ description: A connection to the 'FLASH' pin.
+
+ vin-supply:
+ description: Regulator providing power to the 'VIN' pin.
+
+ led:
+ type: object
+ $ref: common.yaml#
+
+required:
+ - compatible
+ - flash-gpios
+ - enable-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/leds/common.h>
+
+ led-controller {
+ compatible = "sgmicro,sgm3140";
+ flash-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */
+ enable-gpios = <&pio 2 3 GPIO_ACTIVE_HIGH>; /* PC3 */
+ vin-supply = <&reg_dcdc1>;
+
+ sgm3140_flash: led {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ flash-max-timeout-us = <250000>;
+ };
+ };
diff --git a/Documentation/devicetree/bindings/leds/leds-spi-byte.txt b/Documentation/devicetree/bindings/leds/leds-spi-byte.txt
new file mode 100644
index 000000000..28b6b2d90
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-spi-byte.txt
@@ -0,0 +1,44 @@
+* Single Byte SPI LED Device Driver.
+
+The driver can be used for controllers with a very simple SPI protocol:
+- one LED is controlled by a single byte on MOSI
+- the value of the byte gives the brightness between two values (lowest to
+ highest)
+- no return value is necessary (no MISO signal)
+
+The value for lowest and highest brightness is dependent on the device and
+therefore on the compatible string.
+
+Depending on the compatible string some special functions (like hardware
+accelerated blinking) might can be supported too.
+
+The driver currently only supports one LED. The properties of the LED are
+configured in a sub-node in the device node.
+
+Required properties:
+- compatible: should be one of
+ * "ubnt,acb-spi-led" microcontroller (SONiX 8F26E611LA) based device
+ used for example in Ubiquiti airCube ISP
+
+Property rules described in Documentation/devicetree/bindings/spi/spi-bus.txt
+apply.
+
+LED sub-node properties:
+- label:
+ see Documentation/devicetree/bindings/leds/common.txt
+- default-state:
+ see Documentation/devicetree/bindings/leds/common.txt
+ Only "on" and "off" are supported.
+
+Example:
+
+led-controller@0 {
+ compatible = "ubnt,acb-spi-led";
+ reg = <0>;
+ spi-max-frequency = <100000>;
+
+ led {
+ label = "white:status";
+ default-state = "on";
+ };
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-tlc591xx.txt b/Documentation/devicetree/bindings/leds/leds-tlc591xx.txt
new file mode 100644
index 000000000..3bbbf7024
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-tlc591xx.txt
@@ -0,0 +1,40 @@
+LEDs connected to tlc59116 or tlc59108
+
+Required properties
+- compatible: should be "ti,tlc59116" or "ti,tlc59108"
+- #address-cells: must be 1
+- #size-cells: must be 0
+- reg: typically 0x68
+
+Each led is represented as a sub-node of the ti,tlc59116.
+See Documentation/devicetree/bindings/leds/common.txt
+
+LED sub-node properties:
+- reg: number of LED line, 0 to 15 or 0 to 7
+- label: (optional) name of LED
+- linux,default-trigger : (optional)
+
+Examples:
+
+tlc59116@68 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "ti,tlc59116";
+ reg = <0x68>;
+
+ wan@0 {
+ label = "wrt1900ac:amber:wan";
+ reg = <0x0>;
+ };
+
+ 2g@2 {
+ label = "wrt1900ac:white:2g";
+ reg = <0x2>;
+ };
+
+ alive@9 {
+ label = "wrt1900ac:green:alive";
+ reg = <0x9>;
+ linux,default_trigger = "heartbeat";
+ };
+};
diff --git a/Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt b/Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
new file mode 100644
index 000000000..d3696680b
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-trigger-pattern.txt
@@ -0,0 +1,49 @@
+* Pattern format for LED pattern trigger
+
+The pattern is given by a series of tuples, of brightness and duration (ms).
+The LED is expected to traverse the series and each brightness value for the
+specified duration. Duration of 0 means brightness should immediately change to
+new value, and writing malformed pattern deactivates any active one.
+
+1. For gradual dimming, the dimming interval now is set as 50 milliseconds. So
+the tuple with duration less than dimming interval (50ms) is treated as a step
+change of brightness, i.e. the subsequent brightness will be applied without
+adding intervening dimming intervals.
+
+The gradual dimming format of the software pattern values should be:
+"brightness_1 duration_1 brightness_2 duration_2 brightness_3 duration_3 ...".
+For example (using sysfs interface):
+
+echo 0 1000 255 2000 > pattern
+
+It will make the LED go gradually from zero-intensity to max (255) intensity in
+1000 milliseconds, then back to zero intensity in 2000 milliseconds:
+
+LED brightness
+ ^
+255-| / \ / \ /
+ | / \ / \ /
+ | / \ / \ /
+ | / \ / \ /
+ 0-| / \/ \/
+ +---0----1----2----3----4----5----6------------> time (s)
+
+2. To make the LED go instantly from one brightness value to another, we should
+use zero-time lengths (the brightness must be same as the previous tuple's). So
+the format should be: "brightness_1 duration_1 brightness_1 0 brightness_2
+duration_2 brightness_2 0 ...".
+For example (using sysfs interface):
+
+echo 0 1000 0 0 255 2000 255 0 > pattern
+
+It will make the LED stay off for one second, then stay at max brightness for
+two seconds:
+
+LED brightness
+ ^
+255-| +---------+ +---------+
+ | | | | |
+ | | | | |
+ | | | | |
+ 0-| -----+ +----+ +----
+ +---0----1----2----3----4----5----6------------> time (s)
diff --git a/Documentation/devicetree/bindings/leds/pca963x.txt b/Documentation/devicetree/bindings/leds/pca963x.txt
new file mode 100644
index 000000000..4eee41482
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/pca963x.txt
@@ -0,0 +1,52 @@
+LEDs connected to pca9632, pca9633 or pca9634
+
+Required properties:
+- compatible : should be : "nxp,pca9632", "nxp,pca9633", "nxp,pca9634" or "nxp,pca9635"
+
+Optional properties:
+- nxp,totem-pole : use totem pole (push-pull) instead of open-drain (pca9632 defaults
+ to open-drain, newer chips to totem pole)
+- nxp,hw-blink : use hardware blinking instead of software blinking
+- nxp,period-scale : In some configurations, the chip blinks faster than expected.
+ This parameter provides a scaling ratio (fixed point, decimal divided
+ by 1000) to compensate, e.g. 1300=1.3x and 750=0.75x.
+- nxp,inverted-out: invert the polarity of the generated PWM
+
+Each led is represented as a sub-node of the nxp,pca963x device.
+
+LED sub-node properties:
+- label : (optional) see Documentation/devicetree/bindings/leds/common.txt
+- reg : number of LED line (could be from 0 to 3 in pca9632 or pca9633,
+ 0 to 7 in pca9634, or 0 to 15 in pca9635)
+- linux,default-trigger : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+
+Examples:
+
+pca9632: pca9632 {
+ compatible = "nxp,pca9632";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x62>;
+
+ red@0 {
+ label = "red";
+ reg = <0>;
+ linux,default-trigger = "none";
+ };
+ green@1 {
+ label = "green";
+ reg = <1>;
+ linux,default-trigger = "none";
+ };
+ blue@2 {
+ label = "blue";
+ reg = <2>;
+ linux,default-trigger = "none";
+ };
+ unused@3 {
+ label = "unused";
+ reg = <3>;
+ linux,default-trigger = "none";
+ };
+};
diff --git a/Documentation/devicetree/bindings/leds/register-bit-led.txt b/Documentation/devicetree/bindings/leds/register-bit-led.txt
new file mode 100644
index 000000000..c7af6f70a
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/register-bit-led.txt
@@ -0,0 +1,94 @@
+Device Tree Bindings for Register Bit LEDs
+
+Register bit leds are used with syscon multifunctional devices
+where single bits in a certain register can turn on/off a
+single LED. The register bit LEDs appear as children to the
+syscon device, with the proper compatible string. For the
+syscon bindings see:
+Documentation/devicetree/bindings/mfd/syscon.yaml
+
+Each LED is represented as a sub-node of the syscon device. Each
+node's name represents the name of the corresponding LED.
+
+LED sub-node properties:
+
+Required properties:
+- compatible : must be "register-bit-led"
+- offset : register offset to the register controlling this LED
+- mask : bit mask for the bit controlling this LED in the register
+ typically 0x01, 0x02, 0x04 ...
+
+Optional properties:
+- label : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+- linux,default-trigger : (optional)
+ see Documentation/devicetree/bindings/leds/common.txt
+- default-state: (optional) The initial state of the LED
+ see Documentation/devicetree/bindings/leds/common.txt
+
+Example:
+
+syscon: syscon@10000000 {
+ compatible = "arm,realview-pb1176-syscon", "syscon";
+ reg = <0x10000000 0x1000>;
+
+ led@8.0 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x01>;
+ label = "versatile:0";
+ linux,default-trigger = "heartbeat";
+ default-state = "on";
+ };
+ led@8.1 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x02>;
+ label = "versatile:1";
+ linux,default-trigger = "mmc0";
+ default-state = "off";
+ };
+ led@8.2 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x04>;
+ label = "versatile:2";
+ linux,default-trigger = "cpu0";
+ default-state = "off";
+ };
+ led@8.3 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x08>;
+ label = "versatile:3";
+ default-state = "off";
+ };
+ led@8.4 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x10>;
+ label = "versatile:4";
+ default-state = "off";
+ };
+ led@8.5 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x20>;
+ label = "versatile:5";
+ default-state = "off";
+ };
+ led@8.6 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x40>;
+ label = "versatile:6";
+ default-state = "off";
+ };
+ led@8.7 {
+ compatible = "register-bit-led";
+ offset = <0x08>;
+ mask = <0x80>;
+ label = "versatile:7";
+ default-state = "off";
+ };
+};
diff --git a/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
new file mode 100644
index 000000000..86a37c92b
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/rohm,bd71828-leds.yaml
@@ -0,0 +1,54 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/rohm,bd71828-leds.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ROHM BD71828 Power Management Integrated Circuit LED driver
+
+maintainers:
+ - Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
+
+description: |
+ This module is part of the ROHM BD71828 MFD device. For more details
+ see Documentation/devicetree/bindings/mfd/rohm,bd71828-pmic.yaml.
+
+ The LED controller is represented as a sub-node of the PMIC node on the device
+ tree.
+
+ The device has two LED outputs referred as GRNLED and AMBLED in data-sheet.
+
+select: false
+
+properties:
+ compatible:
+ const: rohm,bd71828-leds
+
+patternProperties:
+ "^led-[1-2]$":
+ type: object
+ description:
+ Properties for a single LED.
+ properties:
+ #allOf:
+ #- $ref: "common.yaml#"
+ rohm,led-compatible:
+ description: LED identification string
+ $ref: "/schemas/types.yaml#/definitions/string"
+ enum:
+ - bd71828-ambled
+ - bd71828-grnled
+ function:
+ description:
+ Purpose of LED as defined in dt-bindings/leds/common.h
+ $ref: "/schemas/types.yaml#/definitions/string"
+ color:
+ description:
+ LED colour as defined in dt-bindings/leds/common.h
+ $ref: "/schemas/types.yaml#/definitions/uint32"
+
+required:
+ - compatible
+additionalProperties: false
+
+...
diff --git a/Documentation/devicetree/bindings/leds/ti,tca6507.yaml b/Documentation/devicetree/bindings/leds/ti,tca6507.yaml
new file mode 100644
index 000000000..94c307c98
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/ti,tca6507.yaml
@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/ti,tca6507.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: TCA6507 LED and GPIO controller
+
+maintainers:
+ - NeilBrown <neilb@suse.de>
+
+description:
+ The TCA6507 is a programmable LED controller connected via I2C that can drive
+ 7 separate lines either by holding them low, or by pulsing them with modulated
+ width.
+
+properties:
+ compatible:
+ const: ti,tca6507
+
+ reg:
+ description: I2C slave address of the controller.
+ maxItems: 1
+
+ "#address-cells":
+ const: 1
+
+ "#size-cells":
+ const: 0
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+
+ gpio-line-names: true
+
+patternProperties:
+ "^led@[0-6]$":
+ type: object
+
+ $ref: common.yaml#
+
+ properties:
+ reg:
+ minimum: 0
+ maximum: 6
+
+ required:
+ - reg
+
+ "^gpio@[0-6]$":
+ type: object
+
+ properties:
+ compatible:
+ const: gpio
+
+ reg:
+ minimum: 0
+ maximum: 6
+
+ additionalProperties: false
+
+ required:
+ - reg
+ - compatible
+
+if:
+ patternProperties:
+ "^gpio@[0-6]$":
+ properties:
+ compatible:
+ contains:
+ const: gpio
+then:
+ required:
+ - gpio-controller
+ - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+
+ #include <dt-bindings/gpio/gpio.h>
+ #include <dt-bindings/leds/common.h>
+
+ i2c0 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led-controller@45 {
+ compatible = "ti,tca6507";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ reg = <0x45>;
+
+ gpio-controller;
+ #gpio-cells = <2>;
+
+ gpio-line-names = "wifi_reset@6";
+
+ led@0 {
+ label = "gta04:red:aux";
+ reg = <0x0>;
+ };
+
+ led@1 {
+ label = "gta04:green:aux";
+ reg = <0x1>;
+ };
+
+ led@3 {
+ reg = <0x3>;
+ color = <LED_COLOR_ID_RED>;
+ function = LED_FUNCTION_POWER;
+ linux,default-trigger = "default-on";
+ };
+
+ led@4 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_POWER;
+ reg = <0x4>;
+ };
+
+ gpio@6 {
+ compatible = "gpio";
+ reg = <0x6>;
+ };
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/leds/trigger-source.yaml b/Documentation/devicetree/bindings/leds/trigger-source.yaml
new file mode 100644
index 000000000..89a1cde2b
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/trigger-source.yaml
@@ -0,0 +1,26 @@
+# SPDX-License-Identifier: GPL-2.0-only
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/trigger-source.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Trigger source providers
+
+maintainers:
+ - Jacek Anaszewski <jacek.anaszewski@gmail.com>
+ - Pavel Machek <pavel@ucw.cz>
+
+description:
+ Each trigger source provider should be represented by a device tree node. It
+ may be e.g. a USB port or an Ethernet device.
+
+properties:
+ '#trigger-source-cells':
+ description:
+ Number of cells in a source trigger. Typically 0 for nodes of simple
+ trigger sources (e.g. a specific USB port).
+ enum: [ 0, 1 ]
+
+additionalProperties: true
+
+...