diff options
| author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
|---|---|---|
| committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
| commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
| tree | a94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/devicetree/bindings/mailbox | |
| parent | Initial commit. (diff) | |
| download | linux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.tar.xz linux-5d1646d90e1f2cceb9f0828f4b28318cd0ec7744.zip | |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/devicetree/bindings/mailbox')
25 files changed, 1696 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml b/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml new file mode 100644 index 000000000..75d5d9730 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/allwinner,sun6i-a31-msgbox.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/allwinner,sun6i-a31-msgbox.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Allwinner sunxi Message Box + +maintainers: + - Samuel Holland <samuel@sholland.org> + +description: | + The hardware message box on sun6i, sun8i, sun9i, and sun50i SoCs is a + two-user mailbox controller containing 8 unidirectional FIFOs. An interrupt + is raised for received messages, but software must poll to know when a + transmitted message has been acknowledged by the remote user. Each FIFO can + hold four 32-bit messages; when a FIFO is full, clients must wait before + attempting more transmissions. + + Refer to ./mailbox.txt for generic information about mailbox device-tree + bindings. + +properties: + compatible: + oneOf: + - items: + - enum: + - allwinner,sun8i-a83t-msgbox + - allwinner,sun8i-h3-msgbox + - allwinner,sun9i-a80-msgbox + - allwinner,sun50i-a64-msgbox + - allwinner,sun50i-h6-msgbox + - const: allwinner,sun6i-a31-msgbox + - const: allwinner,sun6i-a31-msgbox + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + description: bus clock + + resets: + maxItems: 1 + description: bus reset + + interrupts: + maxItems: 1 + + '#mbox-cells': + const: 1 + description: first cell is the channel number (0-7) + +required: + - compatible + - reg + - clocks + - resets + - interrupts + - '#mbox-cells' + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/sun8i-h3-ccu.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/reset/sun8i-h3-ccu.h> + + msgbox: mailbox@1c17000 { + compatible = "allwinner,sun8i-h3-msgbox", + "allwinner,sun6i-a31-msgbox"; + reg = <0x01c17000 0x1000>; + clocks = <&ccu CLK_BUS_MSGBOX>; + resets = <&ccu RST_BUS_MSGBOX>; + interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + }; + +... diff --git a/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt b/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt new file mode 100644 index 000000000..c4dd93f1f --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/altera-mailbox.txt @@ -0,0 +1,48 @@ +Altera Mailbox Driver +===================== + +Required properties: +- compatible : "altr,mailbox-1.0". +- reg : physical base address of the mailbox and length of + memory mapped region. +- #mbox-cells: Common mailbox binding property to identify the number + of cells required for the mailbox specifier. Should be 1. + +Optional properties: +- interrupts : interrupt number. The interrupt specifier format + depends on the interrupt controller parent. + +Example: + mbox_tx: mailbox@100 { + compatible = "altr,mailbox-1.0"; + reg = <0x100 0x8>; + interrupt-parent = < &gic_0 >; + interrupts = <5>; + #mbox-cells = <1>; + }; + + mbox_rx: mailbox@200 { + compatible = "altr,mailbox-1.0"; + reg = <0x200 0x8>; + interrupt-parent = < &gic_0 >; + interrupts = <6>; + #mbox-cells = <1>; + }; + +Mailbox client +=============== +"mboxes" and the optional "mbox-names" (please see +Documentation/devicetree/bindings/mailbox/mailbox.txt for details). Each value +of the mboxes property should contain a phandle to the mailbox controller +device node and second argument is the channel index. It must be 0 (hardware +support only one channel).The equivalent "mbox-names" property value can be +used to give a name to the communication channel to be used by the client user. + +Example: + mclient0: mclient0@400 { + compatible = "client-1.0"; + reg = <0x400 0x10>; + mbox-names = "mbox-tx", "mbox-rx"; + mboxes = <&mbox_tx 0>, + <&mbox_rx 0>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml new file mode 100644 index 000000000..aa2b3bf56 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/amlogic,meson-gxbb-mhu.yaml @@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +# Copyright 2019 BayLibre, SAS +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mailbox/amlogic,meson-gxbb-mhu.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Amlogic Meson Message-Handling-Unit Controller + +maintainers: + - Neil Armstrong <narmstrong@baylibre.com> + +description: | + The Amlogic's Meson SoCs Message-Handling-Unit (MHU) is a mailbox controller + that has 3 independent channels/links to communicate with remote processor(s). + MHU links are hardwired on a platform. A link raises interrupt for any + received data. However, there is no specified way of knowing if the sent + data has been read by the remote. This driver assumes the sender polls + STAT register and the remote clears it after having read the data. + +properties: + compatible: + enum: + - amlogic,meson-gxbb-mhu + + reg: + maxItems: 1 + + interrupts: + minItems: 3 + description: + Contains the interrupt information corresponding to each of the 3 links + of MHU. + + "#mbox-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + mailbox@c883c404 { + compatible = "amlogic,meson-gxbb-mhu"; + reg = <0xc883c404 0x4c>; + interrupts = <208>, <209>, <210>; + #mbox-cells = <1>; + }; + diff --git a/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml new file mode 100644 index 000000000..d43791a2d --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/arm,mhu.yaml @@ -0,0 +1,135 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/arm,mhu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: ARM MHU Mailbox Controller + +maintainers: + - Jassi Brar <jaswinder.singh@linaro.org> + +description: | + The ARM's Message-Handling-Unit (MHU) is a mailbox controller that has 3 + independent channels/links to communicate with remote processor(s). MHU links + are hardwired on a platform. A link raises interrupt for any received data. + However, there is no specified way of knowing if the sent data has been read + by the remote. This driver assumes the sender polls STAT register and the + remote clears it after having read the data. The last channel is specified to + be a 'Secure' resource, hence can't be used by Linux running NS. + + The MHU hardware also allows operations in doorbell mode. The MHU drives the + interrupt signal using a 32-bit register, with all 32-bits logically ORed + together. It provides a set of registers to enable software to set, clear and + check the status of each of the bits of this register independently. The use + of 32 bits per interrupt line enables software to provide more information + about the source of the interrupt. For example, each bit of the register can + be associated with a type of event that can contribute to raising the + interrupt. Each of the 32-bits can be used as "doorbell" to alert the remote + processor. + +# We need a select here so we don't match all nodes with 'arm,primecell' +select: + properties: + compatible: + contains: + enum: + - arm,mhu + - arm,mhu-doorbell + required: + - compatible + +properties: + compatible: + oneOf: + - description: Data transfer mode + items: + - const: arm,mhu + - const: arm,primecell + + - description: Doorbell mode + items: + - const: arm,mhu-doorbell + - const: arm,primecell + + + reg: + maxItems: 1 + + interrupts: + items: + - description: low-priority non-secure + - description: high-priority non-secure + - description: Secure + maxItems: 3 + + clocks: + maxItems: 1 + + clock-names: + items: + - const: apb_pclk + + '#mbox-cells': + description: | + Set to 1 in data transfer mode and represents index of the channel. + Set to 2 in doorbell mode and represents index of the channel and doorbell + number. + enum: [ 1, 2 ] + +required: + - compatible + - reg + - interrupts + - '#mbox-cells' + +additionalProperties: false + +examples: + # Data transfer mode. + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + mhuA: mailbox@2b1f0000 { + #mbox-cells = <1>; + compatible = "arm,mhu", "arm,primecell"; + reg = <0 0x2b1f0000 0 0x1000>; + interrupts = <0 36 4>, /* LP-NonSecure */ + <0 35 4>, /* HP-NonSecure */ + <0 37 4>; /* Secure */ + clocks = <&clock 0 2 1>; + clock-names = "apb_pclk"; + }; + + mhu_client_scb: scb@2e000000 { + compatible = "fujitsu,mb86s70-scb-1.0"; + reg = <0 0x2e000000 0 0x4000>; + mboxes = <&mhuA 1>; /* HP-NonSecure */ + }; + }; + + # Doorbell mode. + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + mhuB: mailbox@2b2f0000 { + #mbox-cells = <2>; + compatible = "arm,mhu-doorbell", "arm,primecell"; + reg = <0 0x2b2f0000 0 0x1000>; + interrupts = <0 36 4>, /* LP-NonSecure */ + <0 35 4>, /* HP-NonSecure */ + <0 37 4>; /* Secure */ + clocks = <&clock 0 2 1>; + clock-names = "apb_pclk"; + }; + + mhu_client_scpi: scpi@2f000000 { + compatible = "arm,scpi"; + reg = <0 0x2f000000 0 0x200>; + mboxes = <&mhuB 1 4>; /* HP-NonSecure, 5th doorbell */ + }; + }; diff --git a/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt new file mode 100644 index 000000000..b48d7d300 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/brcm,bcm2835-mbox.txt @@ -0,0 +1,26 @@ +Broadcom BCM2835 VideoCore mailbox IPC + +Required properties: + +- compatible: Should be "brcm,bcm2835-mbox" +- reg: Specifies base physical address and size of the registers +- interrupts: The interrupt number + See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt +- #mbox-cells: Specifies the number of cells needed to encode a mailbox + channel. The value shall be 0, since there is only one + mailbox channel implemented by the device. + +Example: + +mailbox: mailbox@7e00b880 { + compatible = "brcm,bcm2835-mbox"; + reg = <0x7e00b880 0x40>; + interrupts = <0 1>; + #mbox-cells = <0>; +}; + +firmware: firmware { + compatible = "raspberrypi,firmware"; + mboxes = <&mailbox>; + #power-domain-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt new file mode 100644 index 000000000..752ae6b00 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-flexrm-mbox.txt @@ -0,0 +1,59 @@ +Broadcom FlexRM Ring Manager +============================ +The Broadcom FlexRM ring manager provides a set of rings which can be +used to submit work to offload engines. An SoC may have multiple FlexRM +hardware blocks. There is one device tree entry per FlexRM block. The +FlexRM driver will create a mailbox-controller instance for given FlexRM +hardware block where each mailbox channel is a separate FlexRM ring. + +Required properties: +-------------------- +- compatible: Should be "brcm,iproc-flexrm-mbox" +- reg: Specifies base physical address and size of the FlexRM + ring registers +- msi-parent: Phandles (and potential Device IDs) to MSI controllers + The FlexRM engine will send MSIs (instead of wired + interrupts) to CPU. There is one MSI for each FlexRM ring. + Refer devicetree/bindings/interrupt-controller/msi.txt +- #mbox-cells: Specifies the number of cells needed to encode a mailbox + channel. This should be 3. + + The 1st cell is the mailbox channel number. + + The 2nd cell contains MSI completion threshold. This is the + number of completion messages for which FlexRM will inject + one MSI interrupt to CPU. + + The 3nd cell contains MSI timer value representing time for + which FlexRM will wait to accumulate N completion messages + where N is the value specified by 2nd cell above. If FlexRM + does not get required number of completion messages in time + specified by this cell then it will inject one MSI interrupt + to CPU provided atleast one completion message is available. + +Optional properties: +-------------------- +- dma-coherent: Present if DMA operations made by the FlexRM engine (such + as DMA descriptor access, access to buffers pointed by DMA + descriptors and read/write pointer updates to DDR) are + cache coherent with the CPU. + +Example: +-------- +crypto_mbox: mbox@67000000 { + compatible = "brcm,iproc-flexrm-mbox"; + reg = <0x67000000 0x200000>; + msi-parent = <&gic_its 0x7f00>; + #mbox-cells = <3>; +}; + +crypto@672c0000 { + compatible = "brcm,spu2-v2-crypto"; + reg = <0x672c0000 0x1000>; + mboxes = <&crypto_mbox 0 0x1 0xffff>, + <&crypto_mbox 1 0x1 0xffff>, + <&crypto_mbox 16 0x1 0xffff>, + <&crypto_mbox 17 0x1 0xffff>, + <&crypto_mbox 30 0x1 0xffff>, + <&crypto_mbox 31 0x1 0xffff>; +}; diff --git a/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt new file mode 100644 index 000000000..9bcdf2087 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/brcm,iproc-pdc-mbox.txt @@ -0,0 +1,25 @@ +The PDC driver manages data transfer to and from various offload engines +on some Broadcom SoCs. An SoC may have multiple PDC hardware blocks. There is +one device tree entry per block. On some chips, the PDC functionality is +handled by the FA2 (Northstar Plus). + +Required properties: +- compatible : Should be "brcm,iproc-pdc-mbox" or "brcm,iproc-fa2-mbox" for + FA2/Northstar Plus. +- reg: Should contain PDC registers location and length. +- interrupts: Should contain the IRQ line for the PDC. +- #mbox-cells: 1 +- brcm,rx-status-len: Length of metadata preceding received frames, in bytes. + +Optional properties: +- brcm,use-bcm-hdr: present if a BCM header precedes each frame. + +Example: + pdc0: iproc-pdc0@612c0000 { + compatible = "brcm,iproc-pdc-mbox"; + reg = <0 0x612c0000 0 0x445>; /* PDC FS0 regs */ + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; /* one cell per mailbox channel */ + brcm,rx-status-len = <32>; + brcm,use-bcm-hdr; + }; diff --git a/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml new file mode 100644 index 000000000..15cef82cd --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/fsl,mu.yaml @@ -0,0 +1,95 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/fsl,mu.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: NXP i.MX Messaging Unit (MU) + +maintainers: + - Dong Aisheng <aisheng.dong@nxp.com> + +description: | + The Messaging Unit module enables two processors within the SoC to + communicate and coordinate by passing messages (e.g. data, status + and control) through the MU interface. The MU also provides the ability + for one processor to signal the other processor using interrupts. + + Because the MU manages the messaging between processors, the MU uses + different clocks (from each side of the different peripheral buses). + Therefore, the MU must synchronize the accesses from one side to the + other. The MU accomplishes synchronization using two sets of matching + registers (Processor A-facing, Processor B-facing). + +properties: + compatible: + oneOf: + - const: fsl,imx6sx-mu + - const: fsl,imx7ulp-mu + - const: fsl,imx8-mu-scu + - items: + - enum: + - fsl,imx7s-mu + - fsl,imx8mq-mu + - fsl,imx8mm-mu + - fsl,imx8mn-mu + - fsl,imx8mp-mu + - fsl,imx8qxp-mu + - const: fsl,imx6sx-mu + - description: To communicate with i.MX8 SCU with fast IPC + items: + - const: fsl,imx8-mu-scu + - const: fsl,imx8qxp-mu + - const: fsl,imx6sx-mu + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + "#mbox-cells": + description: | + <&phandle type channel> + phandle : Label name of controller + type : Channel type + channel : Channel number + + This MU support 4 type of unidirectional channels, each type + has 4 channels. A total of 16 channels. Following types are + supported: + 0 - TX channel with 32bit transmit register and IRQ transmit + acknowledgment support. + 1 - RX channel with 32bit receive register and IRQ support + 2 - TX doorbell channel. Without own register and no ACK support. + 3 - RX doorbell channel. + const: 2 + + clocks: + maxItems: 1 + + fsl,mu-side-b: + description: boolean, if present, means it is for side B MU. + type: boolean + + power-domains: + maxItems: 1 + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + + mailbox@5d1b0000 { + compatible = "fsl,imx8qxp-mu", "fsl,imx6sx-mu"; + reg = <0x5d1b0000 0x10000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <2>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt b/Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt new file mode 100644 index 000000000..3e5b45374 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/hisilicon,hi3660-mailbox.txt @@ -0,0 +1,51 @@ +Hisilicon Hi3660 Mailbox Controller + +Hisilicon Hi3660 mailbox controller supports up to 32 channels. Messages +are passed between processors, including application & communication +processors, MCU, HIFI, etc. Each channel is unidirectional and accessed +by using MMIO registers; it supports maximum to 8 words message. + +Controller +---------- + +Required properties: +- compatible: : Shall be "hisilicon,hi3660-mbox" +- reg: : Offset and length of the device's register set +- #mbox-cells: : Must be 3 + <&phandle channel dst_irq ack_irq> + phandle : Label name of controller + channel : Channel number + dst_irq : Remote interrupt vector + ack_irq : Local interrupt vector + +- interrupts: : Contains the two IRQ lines for mailbox. + +Example: + +mailbox: mailbox@e896b000 { + compatible = "hisilicon,hi3660-mbox"; + reg = <0x0 0xe896b000 0x0 0x1000>; + interrupts = <0x0 0xc0 0x4>, + <0x0 0xc1 0x4>; + #mbox-cells = <3>; +}; + +Client +------ + +Required properties: +- compatible : See the client docs +- mboxes : Standard property to specify a Mailbox (See ./mailbox.txt) + Cells must match 'mbox-cells' (See Controller docs above) + +Optional properties +- mbox-names : Name given to channels seen in the 'mboxes' property. + +Example: + +stub_clock: stub_clock@e896b500 { + compatible = "hisilicon,hi3660-stub-clk"; + reg = <0x0 0xe896b500 0x0 0x0100>; + #clock-cells = <1>; + mboxes = <&mailbox 13 3 0>; +}; diff --git a/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt b/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt new file mode 100644 index 000000000..044b17f3a --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/hisilicon,hi6220-mailbox.txt @@ -0,0 +1,74 @@ +Hisilicon Hi6220 Mailbox Driver +=============================== + +Hisilicon Hi6220 mailbox supports up to 32 channels. Each channel +is unidirectional with a maximum message size of 8 words. I/O is +performed using register access (there is no DMA) and the cell +raises an interrupt when messages are received. + +Mailbox Device Node: +==================== + +Required properties: +-------------------- +- compatible: Shall be "hisilicon,hi6220-mbox" +- reg: Contains the mailbox register address range (base + address and length); the first item is for IPC + registers, the second item is shared buffer for + slots. +- #mbox-cells: Common mailbox binding property to identify the number + of cells required for the mailbox specifier. Must be 3. + <&phandle slot_id dst_irq ack_irq> + phandle: Label name of mailbox controller + slot_id: Slot id used either for TX or RX + dst_irq: IRQ identifier index number which used by MCU + ack_irq: IRQ identifier index number with generating a + TX/RX interrupt to application processor, + mailbox driver uses it to acknowledge interrupt +- interrupts: Contains the interrupt information for the mailbox + device. The format is dependent on which interrupt + controller the SoCs use. + +Optional Properties: +-------------------- +- hi6220,mbox-tx-noirq: Property of MCU firmware's feature, so mailbox driver + use this flag to ask MCU to enable "automatic idle + flag" mode or IRQ generated mode to acknowledge a TX + completion. + +Example: +-------- + + mailbox: mailbox@f7510000 { + compatible = "hisilicon,hi6220-mbox"; + reg = <0x0 0xf7510000 0x0 0x1000>, /* IPC_S */ + <0x0 0x06dff800 0x0 0x0800>; /* Mailbox */ + interrupt-parent = <&gic>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <3>; + }; + + +Mailbox client +=============== + +Required properties: +-------------------- +- compatible: Many (See the client docs). +- mboxes: Standard property to specify a Mailbox (See ./mailbox.txt) + Cells must match 'mbox-cells' (See Mailbox Device Node above). + +Optional Properties: +-------------------- +- mbox-names: Name given to channels seen in the 'mboxes' property. + +Example: +-------- + + stub_clock: stub_clock { + compatible = "hisilicon,hi6220-stub-clk"; + hisilicon,hi6220-clk-sram = <&sram>; + #clock-cells = <1>; + mbox-names = "mbox-tx", "mbox-rx"; + mboxes = <&mailbox 1 0 11>, <&mailbox 0 1 10>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/mailbox.txt b/Documentation/devicetree/bindings/mailbox/mailbox.txt new file mode 100644 index 000000000..af8ecee2a --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/mailbox.txt @@ -0,0 +1,60 @@ +* Generic Mailbox Controller and client driver bindings + +Generic binding to provide a way for Mailbox controller drivers to +assign appropriate mailbox channel to client drivers. + +* Mailbox Controller + +Required property: +- #mbox-cells: Must be at least 1. Number of cells in a mailbox + specifier. + +Example: + mailbox: mailbox { + ... + #mbox-cells = <1>; + }; + + +* Mailbox Client + +Required property: +- mboxes: List of phandle and mailbox channel specifiers. + +Optional property: +- mbox-names: List of identifier strings for each mailbox channel. +- shmem : List of phandle pointing to the shared memory(SHM) area between the + users of these mailboxes for IPC, one for each mailbox. This shared + memory can be part of any memory reserved for the purpose of this + communication between the mailbox client and the remote. + + +Example: + pwr_cntrl: power { + ... + mbox-names = "pwr-ctrl", "rpc"; + mboxes = <&mailbox 0 &mailbox 1>; + }; + +Example with shared memory(shmem): + + sram: sram@50000000 { + compatible = "mmio-sram"; + reg = <0x50000000 0x10000>; + + #address-cells = <1>; + #size-cells = <1>; + ranges = <0 0x50000000 0x10000>; + + cl_shmem: shmem@0 { + compatible = "client-shmem"; + reg = <0x0 0x200>; + }; + }; + + client@2e000000 { + ... + mboxes = <&mailbox 0>; + shmem = <&cl_shmem>; + .. + }; diff --git a/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.txt b/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.txt new file mode 100644 index 000000000..282ab81a4 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/marvell,armada-3700-rwtm-mailbox.txt @@ -0,0 +1,16 @@ +* rWTM BIU Mailbox driver for Armada 37xx + +Required properties: +- compatible: must be "marvell,armada-3700-rwtm-mailbox" +- reg: physical base address of the mailbox and length of memory mapped + region +- interrupts: the IRQ line for the mailbox +- #mbox-cells: must be 1 + +Example: + rwtm: mailbox@b0000 { + compatible = "marvell,armada-3700-rwtm-mailbox"; + reg = <0xb0000 0x100>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt new file mode 100644 index 000000000..7771ecaac --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt @@ -0,0 +1,64 @@ +MediaTek GCE +=============== + +The Global Command Engine (GCE) is used to help read/write registers with +critical time limitation, such as updating display configuration during the +vblank. The GCE can be used to implement the Command Queue (CMDQ) driver. + +CMDQ driver uses mailbox framework for communication. Please refer to +mailbox.txt for generic information about mailbox device-tree bindings. + +Required properties: +- compatible: can be "mediatek,mt8173-gce", "mediatek,mt8183-gce" or + "mediatek,mt6779-gce". +- reg: Address range of the GCE unit +- interrupts: The interrupt signal from the GCE block +- clock: Clocks according to the common clock binding +- clock-names: Must be "gce" to stand for GCE clock +- #mbox-cells: Should be 2. + <&phandle channel priority> + phandle: Label name of a gce node. + channel: Channel of mailbox. Be equal to the thread id of GCE. + priority: Priority of GCE thread. + +Required properties for a client device: +- mboxes: Client use mailbox to communicate with GCE, it should have this + property and list of phandle, mailbox specifiers. +Optional properties for a client device: +- mediatek,gce-client-reg: Specify the sub-system id which is corresponding + to the register address, it should have this property and list of phandle, + sub-system specifiers. + <&phandle subsys_number start_offset size> + phandle: Label name of a gce node. + subsys_number: specify the sub-system id which is corresponding + to the register address. + start_offset: the start offset of register address that GCE can access. + size: the total size of register address that GCE can access. + +Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h', +'dt-binding/gce/mt8183-gce.h' or 'dt-bindings/gce/mt6779-gce.h'. Such as +sub-system ids, thread priority, event ids. + +Example: + + gce: gce@10212000 { + compatible = "mediatek,mt8173-gce"; + reg = <0 0x10212000 0 0x1000>; + interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_LOW>; + clocks = <&infracfg CLK_INFRA_GCE>; + clock-names = "gce"; + #mbox-cells = <2>; + }; + +Example for a client device: + + mmsys: clock-controller@14000000 { + compatible = "mediatek,mt8173-mmsys"; + mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST>, + <&gce 1 CMDQ_THR_PRIO_LOWEST>; + mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF + CMDQ_EVENT_MUTEX1_STREAM_EOF>; + mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>, + <&gce SUBSYS_1401XXXX 0x2000 0x100>; + ... + }; diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt new file mode 100644 index 000000000..ff3eafc5a --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/nvidia,tegra186-hsp.txt @@ -0,0 +1,72 @@ +NVIDIA Tegra Hardware Synchronization Primitives (HSP) + +The HSP modules are used for the processors to share resources and communicate +together. It provides a set of hardware synchronization primitives for +interprocessor communication. So the interprocessor communication (IPC) +protocols can use hardware synchronization primitives, when operating between +two processors not in an SMP relationship. + +The features that HSP supported are shared mailboxes, shared semaphores, +arbitrated semaphores and doorbells. + +Required properties: +- name : Should be hsp +- compatible + Array of strings. + one of: + - "nvidia,tegra186-hsp" + - "nvidia,tegra194-hsp", "nvidia,tegra186-hsp" +- reg : Offset and length of the register set for the device. +- interrupt-names + Array of strings. + Contains a list of names for the interrupts described by the interrupt + property. May contain the following entries, in any order: + - "doorbell" + - "sharedN", where 'N' is a number from zero up to the number of + external interrupts supported by the HSP instance minus one. + Users of this binding MUST look up entries in the interrupt property + by name, using this interrupt-names property to do so. +- interrupts + Array of interrupt specifiers. + Must contain one entry per entry in the interrupt-names property, + in a matching order. +- #mbox-cells : Should be 2. + +The mbox specifier of the "mboxes" property in the client node should contain +two cells. The first cell determines the HSP type and the second cell is used +to identify the mailbox that the client is going to use. + +For doorbells, the second cell specifies the index of the doorbell to use. + +For shared mailboxes, the second cell is composed of two fields: +- bits 31..24: + A bit mask of flags that further specify how the shared mailbox will be + used. Valid flags are: + - bit 31: + Defines the direction of the mailbox. If set, the mailbox will be used + as a producer (i.e. used to send data). If cleared, the mailbox is the + consumer of data sent by a producer. + +- bits 23.. 0: + The index of the shared mailbox to use. The number of available mailboxes + may vary by instance of the HSP block and SoC generation. + +The following file contains definitions that can be used to construct mailbox +specifiers: + + <dt-bindings/mailbox/tegra186-hsp.h> + +Example: + +hsp_top0: hsp@3c00000 { + compatible = "nvidia,tegra186-hsp"; + reg = <0x0 0x03c00000 0x0 0xa0000>; + interrupts = <GIC_SPI 176 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "doorbell"; + #mbox-cells = <2>; +}; + +client { + ... + mboxes = <&hsp_top0 TEGRA_HSP_MBOX_TYPE_DB TEGRA_HSP_DB_MASTER_XXX>; +}; diff --git a/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt b/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt new file mode 100644 index 000000000..5fe80c1c1 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/omap-mailbox.txt @@ -0,0 +1,180 @@ +OMAP2+ and K3 Mailbox +===================== + +The OMAP mailbox hardware facilitates communication between different processors +using a queued mailbox interrupt mechanism. The IP block is external to the +various processor subsystems and is connected on an interconnect bus. The +communication is achieved through a set of registers for message storage and +interrupt configuration registers. + +Each mailbox IP block/cluster has a certain number of h/w fifo queues and output +interrupt lines. An output interrupt line is routed to an interrupt controller +within a processor subsystem, and there can be more than one line going to a +specific processor's interrupt controller. The interrupt line connections are +fixed for an instance and are dictated by the IP integration into the SoC +(excluding the SoCs that have a Interrupt Crossbar IP). Each interrupt line is +programmable through a set of interrupt configuration registers, and have a rx +and tx interrupt source per h/w fifo. Communication between different processors +is achieved through the appropriate programming of the rx and tx interrupt +sources on the appropriate interrupt lines. + +The number of h/w fifo queues and interrupt lines dictate the usable registers. +All the current OMAP SoCs except for the newest DRA7xx SoC has a single IP +instance. DRA7xx has multiple instances with different number of h/w fifo queues +and interrupt lines between different instances. The interrupt lines can also be +routed to different processor sub-systems on DRA7xx as they are routed through +the Crossbar, a kind of interrupt router/multiplexer. The K3 AM65x and J721E +SoCs has each of these instances form a cluster and combine multiple clusters +into a single IP block present within the Main NavSS. The interrupt lines from +all these clusters are multiplexed and routed to different processor subsystems +over a limited number of common interrupt output lines of an Interrupt Router. + +Mailbox Device Node: +==================== +A Mailbox device node is used to represent a Mailbox IP instance/cluster within +a SoC. The sub-mailboxes are represented as child nodes of this parent node. + +Required properties: +-------------------- +- compatible: Should be one of the following, + "ti,omap2-mailbox" for OMAP2420, OMAP2430 SoCs + "ti,omap3-mailbox" for OMAP3430, OMAP3630 SoCs + "ti,omap4-mailbox" for OMAP44xx, OMAP54xx, AM33xx, + AM43xx and DRA7xx SoCs + "ti,am654-mailbox" for K3 AM65x and J721E SoCs +- reg: Contains the mailbox register address range (base + address and length) +- interrupts: Contains the interrupt information for the mailbox + device. The format is dependent on which interrupt + controller the Mailbox device uses +- #mbox-cells: Common mailbox binding property to identify the number + of cells required for the mailbox specifier. Should be + 1 +- ti,mbox-num-users: Number of targets (processor devices) that the mailbox + device can interrupt +- ti,mbox-num-fifos: Number of h/w fifo queues within the mailbox IP block + +SoC-specific Required properties: +--------------------------------- +The following are mandatory properties for the OMAP architecture based SoCs +only: +- ti,hwmods: Name of the hwmod associated with the mailbox. This + should be defined in the mailbox node only if the node + is not defined as a child node of a corresponding sysc + interconnect node. + +The following are mandatory properties for the K3 AM65x and J721E SoCs only: +- interrupt-parent: Should contain a phandle to the TI-SCI interrupt + controller node that is used to dynamically program + the interrupt routes between the IP and the main GIC + controllers. See the following binding for additional + details, + Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml + +Child Nodes: +============ +A child node is used for representing the actual sub-mailbox device that is +used for the communication between the host processor and a remote processor. +Each child node should have a unique node name across all the different +mailbox device nodes. + +Required properties: +-------------------- +- ti,mbox-tx: sub-mailbox descriptor property defining a Tx fifo +- ti,mbox-rx: sub-mailbox descriptor property defining a Rx fifo + +Sub-mailbox Descriptor Data +--------------------------- +Each of the above ti,mbox-tx and ti,mbox-rx properties should have 3 cells of +data that represent the following: + Cell #1 (fifo_id) - mailbox fifo id used either for transmitting + (ti,mbox-tx) or for receiving (ti,mbox-rx) + Cell #2 (irq_id) - irq identifier index number to use from the parent's + interrupts data. Should be 0 for most of the cases, a + positive index value is seen only on mailboxes that have + multiple interrupt lines connected to the MPU processor. + Cell #3 (usr_id) - mailbox user id for identifying the interrupt line + associated with generating a tx/rx fifo interrupt. + +Optional Properties: +-------------------- +- ti,mbox-send-noirq: Quirk flag to allow the client user of this sub-mailbox + to send messages without triggering a Tx ready interrupt, + and to control the Tx ticker. Should be used only on + sub-mailboxes used to communicate with WkupM3 remote + processor on AM33xx/AM43xx SoCs. + +Mailbox Users: +============== +A device needing to communicate with a target processor device should specify +them using the common mailbox binding properties, "mboxes" and the optional +"mbox-names" (please see Documentation/devicetree/bindings/mailbox/mailbox.txt +for details). Each value of the mboxes property should contain a phandle to the +mailbox controller device node and an args specifier that will be the phandle to +the intended sub-mailbox child node to be used for communication. The equivalent +"mbox-names" property value can be used to give a name to the communication channel +to be used by the client user. + + +Example: +-------- + +1. /* OMAP4 */ +mailbox: mailbox@4a0f4000 { + compatible = "ti,omap4-mailbox"; + reg = <0x4a0f4000 0x200>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + ti,hwmods = "mailbox"; + #mbox-cells = <1>; + ti,mbox-num-users = <3>; + ti,mbox-num-fifos = <8>; + mbox_ipu: mbox_ipu { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <1 0 0>; + }; + mbox_dsp: mbox_dsp { + ti,mbox-tx = <3 0 0>; + ti,mbox-rx = <2 0 0>; + }; +}; + +dsp { + ... + mboxes = <&mailbox &mbox_dsp>; + ... +}; + +2. /* AM33xx */ +mailbox: mailbox@480c8000 { + compatible = "ti,omap4-mailbox"; + reg = <0x480C8000 0x200>; + interrupts = <77>; + ti,hwmods = "mailbox"; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <8>; + mbox_wkupm3: wkup_m3 { + ti,mbox-tx = <0 0 0>; + ti,mbox-rx = <0 0 3>; + }; +}; + +3. /* AM65x */ +&cbass_main { + cbass_main_navss: interconnect0 { + mailbox0_cluster0: mailbox@31f80000 { + compatible = "ti,am654-mailbox"; + reg = <0x00 0x31f80000 0x00 0x200>; + #mbox-cells = <1>; + ti,mbox-num-users = <4>; + ti,mbox-num-fifos = <16>; + interrupt-parent = <&intr_main_navss>; + interrupts = <164 0>; + + mbox_mcu_r5fss0_core0: mbox-mcu-r5fss0-core0 { + ti,mbox-tx = <1 0 0>; + ti,mbox-rx = <0 0 0>; + }; + }; + }; +}; diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml new file mode 100644 index 000000000..ffd09b664 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml @@ -0,0 +1,89 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mailbox/qcom,apcs-kpss-global.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Qualcomm APCS global block bindings + +description: + This binding describes the APCS "global" block found in various Qualcomm + platforms. + +maintainers: + - Sivaprakash Murugesan <sivaprak@codeaurora.org> + +properties: + compatible: + enum: + - qcom,ipq6018-apcs-apps-global + - qcom,ipq8074-apcs-apps-global + - qcom,msm8916-apcs-kpss-global + - qcom,msm8994-apcs-kpss-global + - qcom,msm8996-apcs-hmss-global + - qcom,msm8998-apcs-hmss-global + - qcom,qcs404-apcs-apps-global + - qcom,sc7180-apss-shared + - qcom,sdm660-apcs-hmss-global + - qcom,sdm845-apss-shared + - qcom,sm8150-apss-shared + + reg: + maxItems: 1 + + clocks: + description: phandles to the parent clocks of the clock driver + items: + - description: primary pll parent of the clock driver + - description: auxiliary parent + + '#mbox-cells': + const: 1 + + '#clock-cells': + const: 0 + + clock-names: + items: + - const: pll + - const: aux + +required: + - compatible + - reg + - '#mbox-cells' + +additionalProperties: false + +examples: + + # Example apcs with msm8996 + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + apcs_glb: mailbox@9820000 { + compatible = "qcom,msm8996-apcs-hmss-global"; + reg = <0x9820000 0x1000>; + + #mbox-cells = <1>; + }; + + rpm-glink { + compatible = "qcom,glink-rpm"; + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>; + qcom,rpm-msg-ram = <&rpm_msg_ram>; + mboxes = <&apcs_glb 0>; + mbox-names = "rpm_hlos"; + }; + + # Example apcs with qcs404 + - | + #define GCC_APSS_AHB_CLK_SRC 1 + #define GCC_GPLL0_AO_OUT_MAIN 123 + apcs: mailbox@b011000 { + compatible = "qcom,qcs404-apcs-apps-global"; + reg = <0x0b011000 0x1000>; + #mbox-cells = <1>; + clocks = <&apcs_hfpll>, <&gcc GCC_GPLL0_AO_OUT_MAIN>; + clock-names = "pll", "aux"; + #clock-cells = <0>; + }; diff --git a/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml new file mode 100644 index 000000000..168beeb7e --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/qcom-ipcc.yaml @@ -0,0 +1,80 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mailbox/qcom-ipcc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Technologies, Inc. Inter-Processor Communication Controller + +maintainers: + - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> + +description: + The Inter-Processor Communication Controller (IPCC) is a centralized hardware + to route interrupts across various subsystems. It involves a three-level + addressing scheme called protocol, client and signal. For example, consider an + entity on the Application Processor Subsystem (APSS) that wants to listen to + Modem's interrupts via Shared Memory Point to Point (SMP2P) interface. In such + a case, the client would be Modem (client-id is 2) and the signal would be + SMP2P (signal-id is 2). The SMP2P itself falls under the Multiprocessor (MPROC) + protocol (protocol-id is 0). Refer include/dt-bindings/mailbox/qcom-ipcc.h + for the list of such IDs. + +properties: + compatible: + items: + - enum: + - qcom,sm8250-ipcc + - const: qcom,ipcc + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + interrupt-controller: true + + "#interrupt-cells": + const: 3 + description: + The first cell is the client-id, the second cell is the signal-id and the + third cell is the interrupt type. + + "#mbox-cells": + const: 2 + description: + The first cell is the client-id, and the second cell is the signal-id. + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - "#interrupt-cells" + - "#mbox-cells" + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/mailbox/qcom-ipcc.h> + + mailbox@408000 { + compatible = "qcom,sm8250-ipcc", "qcom,ipcc"; + reg = <0x408000 0x1000>; + interrupts = <GIC_SPI 229 IRQ_TYPE_LEVEL_HIGH>; + interrupt-controller; + #interrupt-cells = <3>; + #mbox-cells = <2>; + }; + + smp2p-modem { + compatible = "qcom,smp2p"; + interrupts-extended = <&ipcc_mproc IPCC_CLIENT_MPSS + IPCC_MPROC_SIGNAL_SMP2P IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc_mproc IPCC_CLIENT_MPSS IPCC_MPROC_SIGNAL_SMP2P>; + + /* Other SMP2P fields */ + }; diff --git a/Documentation/devicetree/bindings/mailbox/rockchip-mailbox.txt b/Documentation/devicetree/bindings/mailbox/rockchip-mailbox.txt new file mode 100644 index 000000000..b6bb84acf --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/rockchip-mailbox.txt @@ -0,0 +1,32 @@ +Rockchip mailbox + +The Rockchip mailbox is used by the Rockchip CPU cores to communicate +requests to MCU processor. + +Refer to ./mailbox.txt for generic information about mailbox device-tree +bindings. + +Required properties: + + - compatible: should be one of the following. + - "rockchip,rk3368-mbox" for rk3368 + - reg: physical base address of the controller and length of memory mapped + region. + - interrupts: The interrupt number to the cpu. The interrupt specifier format + depends on the interrupt controller. + - #mbox-cells: Common mailbox binding property to identify the number + of cells required for the mailbox specifier. Should be 1 + +Example: +-------- + +/* RK3368 */ +mbox: mbox@ff6b0000 { + compatible = "rockchip,rk3368-mailbox"; + reg = <0x0 0xff6b0000 0x0 0x1000>, + interrupts = <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>; + #mbox-cells = <1>; +}; diff --git a/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml b/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml new file mode 100644 index 000000000..26a5cca3f --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/sprd-mailbox.yaml @@ -0,0 +1,60 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mailbox/sprd-mailbox.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: Spreadtrum mailbox controller bindings + +maintainers: + - Orson Zhai <orsonzhai@gmail.com> + - Baolin Wang <baolin.wang7@gmail.com> + - Chunyan Zhang <zhang.lyra@gmail.com> + +properties: + compatible: + enum: + - sprd,sc9860-mailbox + + reg: + items: + - description: inbox registers' base address + - description: outbox registers' base address + + interrupts: + items: + - description: inbox interrupt + - description: outbox interrupt + + clocks: + maxItems: 1 + + clock-names: + items: + - const: enable + + "#mbox-cells": + const: 1 + +required: + - compatible + - reg + - interrupts + - "#mbox-cells" + - clocks + - clock-names + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + mailbox: mailbox@400a0000 { + compatible = "sprd,sc9860-mailbox"; + reg = <0x400a0000 0x8000>, <0x400a8000 0x8000>; + #mbox-cells = <1>; + clock-names = "enable"; + clocks = <&aon_gate 53>; + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>; + }; +... diff --git a/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml new file mode 100644 index 000000000..3b7ab61a1 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/st,stm32-ipcc.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/mailbox/st,stm32-ipcc.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: STMicroelectronics STM32 IPC controller bindings + +description: + The IPCC block provides a non blocking signaling mechanism to post and + retrieve messages in an atomic way between two processors. + It provides the signaling for N bidirectionnal channels. The number of + channels (N) can be read from a dedicated register. + +maintainers: + - Fabien Dessenne <fabien.dessenne@st.com> + - Arnaud Pouliquen <arnaud.pouliquen@st.com> + +properties: + compatible: + const: st,stm32mp1-ipcc + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + interrupts: + items: + - description: rx channel occupied + - description: tx channel free + - description: wakeup source + minItems: 2 + maxItems: 3 + + interrupt-names: + items: + - const: rx + - const: tx + - const: wakeup + minItems: 2 + maxItems: 3 + + wakeup-source: true + + "#mbox-cells": + const: 1 + + st,proc-id: + description: Processor id using the mailbox (0 or 1) + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1] + +required: + - compatible + - reg + - st,proc-id + - clocks + - interrupt-names + - "#mbox-cells" + - interrupts + +additionalProperties: false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/clock/stm32mp1-clks.h> + ipcc: mailbox@4c001000 { + compatible = "st,stm32mp1-ipcc"; + #mbox-cells = <1>; + reg = <0x4c001000 0x400>; + st,proc-id = <0>; + interrupts-extended = <&intc GIC_SPI 100 IRQ_TYPE_NONE>, + <&intc GIC_SPI 101 IRQ_TYPE_NONE>, + <&aiec 62 1>; + interrupt-names = "rx", "tx", "wakeup"; + clocks = <&rcc_clk IPCC>; + wakeup-source; + }; + +... diff --git a/Documentation/devicetree/bindings/mailbox/sti-mailbox.txt b/Documentation/devicetree/bindings/mailbox/sti-mailbox.txt new file mode 100644 index 000000000..351f61267 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/sti-mailbox.txt @@ -0,0 +1,51 @@ +ST Microelectronics Mailbox Driver + +Each ST Mailbox IP currently consists of 4 instances of 32 channels. Messages +are passed between Application and Remote processors using shared memory. + +Controller +---------- + +Required properties: +- compatible : Should be "st,stih407-mailbox" +- reg : Offset and length of the device's register set +- mbox-name : Name of the mailbox +- #mbox-cells: : Must be 2 + <&phandle instance channel direction> + phandle : Label name of controller + instance : Instance number + channel : Channel number + +Optional properties +- interrupts : Contains the IRQ line for a Rx mailbox + +Example: + +mailbox0: mailbox@0 { + compatible = "st,stih407-mailbox"; + reg = <0x08f00000 0x1000>; + interrupts = <GIC_SPI 1 IRQ_TYPE_NONE>; + #mbox-cells = <2>; + mbox-name = "a9"; +}; + +Client +------ + +Required properties: +- compatible : Many (See the client docs) +- reg : Shared (between Application and Remote) memory address +- mboxes : Standard property to specify a Mailbox (See ./mailbox.txt) + Cells must match 'mbox-cells' (See Controller docs above) + +Optional properties +- mbox-names : Name given to channels seen in the 'mboxes' property. + +Example: + +mailbox_test { + compatible = "mailbox-test"; + reg = <0x[shared_memory_address], [shared_memory_size]>; + mboxes = <&mailbox2 0 1>, <&mailbox0 2 1>; + mbox-names = "tx", "rx"; +}; diff --git a/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt b/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt new file mode 100644 index 000000000..ebf0e3710 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/ti,message-manager.txt @@ -0,0 +1,50 @@ +Texas Instruments' Message Manager Driver +======================================== + +The Texas Instruments' Message Manager is a mailbox controller that has +configurable queues selectable at SoC(System on Chip) integration. The Message +manager is broken up into queues in different address regions that are called +"proxies" - each instance is unidirectional and is instantiated at SoC +integration level to indicate receive or transmit path. + +Message Manager Device Node: +=========================== +Required properties: +-------------------- +- compatible: Shall be: "ti,k2g-message-manager" +- reg-names queue_proxy_region - Map the queue proxy region. + queue_state_debug_region - Map the queue state debug + region. +- reg: Contains the register map per reg-names. +- #mbox-cells Shall be 2. Contains the queue ID and proxy ID in that + order referring to the transfer path. +- interrupt-names: Contains interrupt names matching the rx transfer path + for a given SoC. Receive interrupts shall be of the + format: "rx_<QID>". + For ti,k2g-message-manager, this shall contain: + "rx_005", "rx_057" +- interrupts: Contains the interrupt information corresponding to + interrupt-names property. + +Example(K2G): +------------ + + msgmgr: msgmgr@2a00000 { + compatible = "ti,k2g-message-manager"; + #mbox-cells = <2>; + reg-names = "queue_proxy_region", "queue_state_debug_region"; + reg = <0x02a00000 0x400000>, <0x028c3400 0x400>; + interrupt-names = "rx_005", "rx_057"; + interrupts = <GIC_SPI 324 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 327 IRQ_TYPE_LEVEL_HIGH>; + }; + + pmmc: pmmc { + [...] + mbox-names = "rx", "tx"; + # RX queue ID is 5, proxy ID is 2 + # TX queue ID is 0, proxy ID is 0 + mboxes= <&msgmgr 5 2>, + <&msgmgr 0 0>; + [...] + }; diff --git a/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.txt b/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.txt new file mode 100644 index 000000000..6c9c7daf0 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/ti,secure-proxy.txt @@ -0,0 +1,50 @@ +Texas Instruments' Secure Proxy +======================================== + +The Texas Instruments' secure proxy is a mailbox controller that has +configurable queues selectable at SoC(System on Chip) integration. The +Message manager is broken up into different address regions that are +called "threads" or "proxies" - each instance is unidirectional and is +instantiated at SoC integration level by system controller to indicate +receive or transmit path. + +Message Manager Device Node: +=========================== +Required properties: +-------------------- +- compatible: Shall be "ti,am654-secure-proxy" +- reg-names target_data - Map the proxy data region + rt - Map the realtime status region + scfg - Map the configuration region +- reg: Contains the register map per reg-names. +- #mbox-cells Shall be 1 and shall refer to the transfer path + called thread. +- interrupt-names: Contains interrupt names matching the rx transfer path + for a given SoC. Receive interrupts shall be of the + format: "rx_<PID>". +- interrupts: Contains the interrupt information corresponding to + interrupt-names property. + +Example(AM654): +------------ + + secure_proxy: mailbox@32c00000 { + compatible = "ti,am654-secure-proxy"; + #mbox-cells = <1>; + reg-names = "target_data", "rt", "scfg"; + reg = <0x0 0x32c00000 0x0 0x100000>, + <0x0 0x32400000 0x0 0x100000>, + <0x0 0x32800000 0x0 0x100000>; + interrupt-names = "rx_011"; + interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>; + }; + + dmsc: dmsc { + [...] + mbox-names = "rx", "tx"; + # RX Thread ID is 11 + # TX Thread ID is 13 + mboxes= <&secure_proxy 11>, + <&secure_proxy 13>; + [...] + }; diff --git a/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt new file mode 100644 index 000000000..e46451bb2 --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/xgene-slimpro-mailbox.txt @@ -0,0 +1,35 @@ +The APM X-Gene SLIMpro mailbox is used to communicate messages between +the ARM64 processors and the Cortex M3 (dubbed SLIMpro). It uses a simple +interrupt based door bell mechanism and can exchange simple messages using the +internal registers. + +There are total of 8 interrupts in this mailbox. Each used for an individual +door bell (or mailbox channel). + +Required properties: +- compatible: Should be as "apm,xgene-slimpro-mbox". + +- reg: Contains the mailbox register address range. + +- interrupts: 8 interrupts must be from 0 to 7, interrupt 0 define the + the interrupt for mailbox channel 0 and interrupt 1 for + mailbox channel 1 and so likewise for the reminder. + +- #mbox-cells: only one to specify the mailbox channel number. + +Example: + +Mailbox Node: + mailbox: mailbox@10540000 { + compatible = "apm,xgene-slimpro-mbox"; + reg = <0x0 0x10540000 0x0 0xa000>; + #mbox-cells = <1>; + interrupts = <0x0 0x0 0x4>, + <0x0 0x1 0x4>, + <0x0 0x2 0x4>, + <0x0 0x3 0x4>, + <0x0 0x4 0x4>, + <0x0 0x5 0x4>, + <0x0 0x6 0x4>, + <0x0 0x7 0x4>, + }; diff --git a/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt new file mode 100644 index 000000000..ad76edccf --- /dev/null +++ b/Documentation/devicetree/bindings/mailbox/xlnx,zynqmp-ipi-mailbox.txt @@ -0,0 +1,127 @@ +Xilinx IPI Mailbox Controller +======================================== + +The Xilinx IPI(Inter Processor Interrupt) mailbox controller is to manage +messaging between two Xilinx Zynq UltraScale+ MPSoC IPI agents. Each IPI +agent owns registers used for notification and buffers for message. + + +-------------------------------------+ + | Xilinx ZynqMP IPI Controller | + +-------------------------------------+ + +--------------------------------------------------+ +ATF | | + | | + | | + +--------------------------+ | + | | + | | + +--------------------------------------------------+ + +------------------------------------------+ + | +----------------+ +----------------+ | +Hardware | | IPI Agent | | IPI Buffers | | + | | Registers | | | | + | | | | | | + | +----------------+ +----------------+ | + | | + | Xilinx IPI Agent Block | + +------------------------------------------+ + + +Controller Device Node: +=========================== +Required properties: +-------------------- +IPI agent node: +- compatible: Shall be: "xlnx,zynqmp-ipi-mailbox" +- interrupt-parent: Phandle for the interrupt controller +- interrupts: Interrupt information corresponding to the + interrupt-names property. +- xlnx,ipi-id: local Xilinx IPI agent ID +- #address-cells: number of address cells of internal IPI mailbox nodes +- #size-cells: number of size cells of internal IPI mailbox nodes + +Internal IPI mailbox node: +- reg: IPI buffers address ranges +- reg-names: Names of the reg resources. It should have: + * local_request_region + - IPI request msg buffer written by local and read + by remote + * local_response_region + - IPI response msg buffer written by local and read + by remote + * remote_request_region + - IPI request msg buffer written by remote and read + by local + * remote_response_region + - IPI response msg buffer written by remote and read + by local +- #mbox-cells: Shall be 1. It contains: + * tx(0) or rx(1) channel +- xlnx,ipi-id: remote Xilinx IPI agent ID of which the mailbox is + connected to. + +Optional properties: +-------------------- +- method: The method of accessing the IPI agent registers. + Permitted values are: "smc" and "hvc". Default is + "smc". + +Client Device Node: +=========================== +Required properties: +-------------------- +- mboxes: Standard property to specify a mailbox + (See ./mailbox.txt) +- mbox-names: List of identifier strings for each mailbox + channel. + +Example: +=========================== + zynqmp_ipi { + compatible = "xlnx,zynqmp-ipi-mailbox"; + interrupt-parent = <&gic>; + interrupts = <0 29 4>; + xlnx,ipi-id = <0>; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + /* APU<->RPU0 IPI mailbox controller */ + ipi_mailbox_rpu0: mailbox@ff990400 { + reg = <0xff990400 0x20>, + <0xff990420 0x20>, + <0xff990080 0x20>, + <0xff9900a0 0x20>; + reg-names = "local_request_region", + "local_response_region", + "remote_request_region", + "remote_response_region"; + #mbox-cells = <1>; + xlnx,ipi-id = <1>; + }; + /* APU<->RPU1 IPI mailbox controller */ + ipi_mailbox_rpu1: mailbox@ff990440 { + reg = <0xff990440 0x20>, + <0xff990460 0x20>, + <0xff990280 0x20>, + <0xff9902a0 0x20>; + reg-names = "local_request_region", + "local_response_region", + "remote_request_region", + "remote_response_region"; + #mbox-cells = <1>; + xlnx,ipi-id = <2>; + }; + }; + rpu0 { + ... + mboxes = <&ipi_mailbox_rpu0 0>, + <&ipi_mailbox_rpu0 1>; + mbox-names = "tx", "rx"; + }; + rpu1 { + ... + mboxes = <&ipi_mailbox_rpu1 0>, + <&ipi_mailbox_rpu1 1>; + mbox-names = "tx", "rx"; + }; |