diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/devicetree/bindings/mmc/sdhci-msm.txt | |
parent | Initial commit. (diff) | |
download | linux-upstream/5.10.209.tar.xz linux-upstream/5.10.209.zip |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/devicetree/bindings/mmc/sdhci-msm.txt')
-rw-r--r-- | Documentation/devicetree/bindings/mmc/sdhci-msm.txt | 115 |
1 files changed, 115 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt new file mode 100644 index 000000000..3b602fd61 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt @@ -0,0 +1,115 @@ +* Qualcomm SDHCI controller (sdhci-msm) + +This file documents differences between the core properties in mmc.txt +and the properties used by the sdhci-msm driver. + +Required properties: +- compatible: Should contain a SoC-specific string and a IP version string: + version strings: + "qcom,sdhci-msm-v4" for sdcc versions less than 5.0 + "qcom,sdhci-msm-v5" for sdcc version 5.0 + For SDCC version 5.0.0, MCI registers are removed from SDCC + interface and some registers are moved to HC. New compatible + string is added to support this change - "qcom,sdhci-msm-v5". + full compatible strings with SoC and version: + "qcom,apq8084-sdhci", "qcom,sdhci-msm-v4" + "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4" + "qcom,msm8916-sdhci", "qcom,sdhci-msm-v4" + "qcom,msm8992-sdhci", "qcom,sdhci-msm-v4" + "qcom,msm8996-sdhci", "qcom,sdhci-msm-v4" + "qcom,sm8250-sdhci", "qcom,sdhci-msm-v5" + "qcom,sdm845-sdhci", "qcom,sdhci-msm-v5" + "qcom,qcs404-sdhci", "qcom,sdhci-msm-v5" + "qcom,sc7180-sdhci", "qcom,sdhci-msm-v5"; + NOTE that some old device tree files may be floating around that only + have the string "qcom,sdhci-msm-v4" without the SoC compatible string + but doing that should be considered a deprecated practice. + +- reg: Base address and length of the register in the following order: + - Host controller register map (required) + - SD Core register map (required for controllers earlier than msm-v5) + - CQE register map (Optional, CQE support is present on SDHC instance meant + for eMMC and version v4.2 and above) +- reg-names: When CQE register map is supplied, below reg-names are required + - "hc" for Host controller register map + - "core" for SD core register map + - "cqhci" for CQE register map +- interrupts: Should contain an interrupt-specifiers for the interrupts: + - Host controller interrupt (required) +- pinctrl-names: Should contain only one value - "default". +- pinctrl-0: Should specify pin control groups used for this controller. +- clocks: A list of phandle + clock-specifier pairs for the clocks listed in clock-names. +- clock-names: Should contain the following: + "iface" - Main peripheral bus clock (PCLK/HCLK - AHB Bus clock) (required) + "core" - SDC MMC clock (MCLK) (required) + "bus" - SDCC bus voter clock (optional) + "xo" - TCXO clock (optional) + "cal" - reference clock for RCLK delay calibration (optional) + "sleep" - sleep clock for RCLK delay calibration (optional) + +- qcom,ddr-config: Certain chipsets and platforms require particular settings + for the DDR_CONFIG register. Use this field to specify the register + value as per the Hardware Programming Guide. + +- qcom,dll-config: Chipset and Platform specific value. Use this field to + specify the DLL_CONFIG register value as per Hardware Programming Guide. + +Optional Properties: +* Following bus parameters are required for interconnect bandwidth scaling: +- interconnects: Pairs of phandles and interconnect provider specifier + to denote the edge source and destination ports of + the interconnect path. + +- interconnect-names: For sdhc, we have two main paths. + 1. Data path : sdhc to ddr + 2. Config path : cpu to sdhc + For Data interconnect path the name supposed to be + is "sdhc-ddr" and for config interconnect path it is + "cpu-sdhc". + Please refer to Documentation/devicetree/bindings/ + interconnect/ for more details. + +Example: + + sdhc_1: sdhci@f9824900 { + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf9824900 0x11c>, <0xf9824000 0x800>; + interrupts = <0 123 0>; + bus-width = <8>; + non-removable; + + vmmc-supply = <&pm8941_l20>; + vqmmc-supply = <&pm8941_s3>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>; + + clocks = <&gcc GCC_SDCC1_APPS_CLK>, <&gcc GCC_SDCC1_AHB_CLK>; + clock-names = "core", "iface"; + interconnects = <&qnoc MASTER_SDCC_ID &qnoc SLAVE_DDR_ID>, + <&qnoc MASTER_CPU_ID &qnoc SLAVE_SDCC_ID>; + interconnect-names = "sdhc-ddr","cpu-sdhc"; + + qcom,dll-config = <0x000f642c>; + qcom,ddr-config = <0x80040868>; + }; + + sdhc_2: sdhci@f98a4900 { + compatible = "qcom,msm8974-sdhci", "qcom,sdhci-msm-v4"; + reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>; + interrupts = <0 125 0>; + bus-width = <4>; + cd-gpios = <&msmgpio 62 0x1>; + + vmmc-supply = <&pm8941_l21>; + vqmmc-supply = <&pm8941_l13>; + + pinctrl-names = "default"; + pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data>; + + clocks = <&gcc GCC_SDCC2_APPS_CLK>, <&gcc GCC_SDCC2_AHB_CLK>; + clock-names = "core", "iface"; + + qcom,dll-config = <0x0007642c>; + qcom,ddr-config = <0x80040868>; + }; |