diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/devicetree/bindings/mtd/cadence-quadspi.txt | |
parent | Initial commit. (diff) | |
download | linux-upstream/5.10.209.tar.xz linux-upstream/5.10.209.zip |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | Documentation/devicetree/bindings/mtd/cadence-quadspi.txt | 67 |
1 files changed, 67 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt new file mode 100644 index 000000000..945be7d5b --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/cadence-quadspi.txt @@ -0,0 +1,67 @@ +* Cadence Quad SPI controller + +Required properties: +- compatible : should be one of the following: + Generic default - "cdns,qspi-nor". + For TI 66AK2G SoC - "ti,k2g-qspi", "cdns,qspi-nor". + For TI AM654 SoC - "ti,am654-ospi", "cdns,qspi-nor". +- reg : Contains two entries, each of which is a tuple consisting of a + physical address and length. The first entry is the address and + length of the controller register set. The second entry is the + address and length of the QSPI Controller data area. +- interrupts : Unit interrupt specifier for the controller interrupt. +- clocks : phandle to the Quad SPI clock. +- cdns,fifo-depth : Size of the data FIFO in words. +- cdns,fifo-width : Bus width of the data FIFO in bytes. +- cdns,trigger-address : 32-bit indirect AHB trigger address. + +Optional properties: +- cdns,is-decoded-cs : Flag to indicate whether decoder is used or not. +- cdns,rclk-en : Flag to indicate that QSPI return clock is used to latch + the read data rather than the QSPI clock. Make sure that QSPI return + clock is populated on the board before using this property. + +Optional subnodes: +Subnodes of the Cadence Quad SPI controller are spi slave nodes with additional +custom properties: +- cdns,read-delay : Delay for read capture logic, in clock cycles +- cdns,tshsl-ns : Delay in nanoseconds for the length that the master + mode chip select outputs are de-asserted between + transactions. +- cdns,tsd2d-ns : Delay in nanoseconds between one chip select being + de-activated and the activation of another. +- cdns,tchsh-ns : Delay in nanoseconds between last bit of current + transaction and deasserting the device chip select + (qspi_n_ss_out). +- cdns,tslch-ns : Delay in nanoseconds between setting qspi_n_ss_out low + and first bit transfer. +- resets : Must contain an entry for each entry in reset-names. + See ../reset/reset.txt for details. +- reset-names : Must include either "qspi" and/or "qspi-ocp". + +Example: + + qspi: spi@ff705000 { + compatible = "cdns,qspi-nor"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0xff705000 0x1000>, + <0xffa00000 0x1000>; + interrupts = <0 151 4>; + clocks = <&qspi_clk>; + cdns,is-decoded-cs; + cdns,fifo-depth = <128>; + cdns,fifo-width = <4>; + cdns,trigger-address = <0x00000000>; + resets = <&rst QSPI_RESET>, <&rst QSPI_OCP_RESET>; + reset-names = "qspi", "qspi-ocp"; + + flash0: n25q00@0 { + ... + cdns,read-delay = <4>; + cdns,tshsl-ns = <50>; + cdns,tsd2d-ns = <50>; + cdns,tchsh-ns = <4>; + cdns,tslch-ns = <4>; + }; + }; |