Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 113 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/net/altera_tse.txt b/Documentation/devicetree/bindings/net/altera_tse.txt
new file mode 100644
index 000000000..0b7d4d375
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/altera_tse.txt
@@ -0,0 +1,113 @@
+* Altera Triple-Speed Ethernet MAC driver (TSE)
+
+Required properties:
+- compatible: Should be "altr,tse-1.0" for legacy SGDMA based TSE, and should
+		be "altr,tse-msgdma-1.0" for the preferred MSGDMA based TSE.
+		ALTR is supported for legacy device trees, but is deprecated.
+		altr should be used for all new designs.
+- reg: Address and length of the register set for the device. It contains
+  the information of registers in the same order as described by reg-names
+- reg-names: Should contain the reg names
+  "control_port": MAC configuration space region
+  "tx_csr":       xDMA Tx dispatcher control and status space region
+  "tx_desc":      MSGDMA Tx dispatcher descriptor space region
+  "rx_csr" :      xDMA Rx dispatcher control and status space region
+  "rx_desc":      MSGDMA Rx dispatcher descriptor space region
+  "rx_resp":      MSGDMA Rx dispatcher response space region
+  "s1":		  SGDMA descriptor memory
+- interrupts: Should contain the TSE interrupts and it's mode.
+- interrupt-names: Should contain the interrupt names
+  "rx_irq":       xDMA Rx dispatcher interrupt
+  "tx_irq":       xDMA Tx dispatcher interrupt
+- rx-fifo-depth: MAC receive FIFO buffer depth in bytes
+- tx-fifo-depth: MAC transmit FIFO buffer depth in bytes
+- phy-mode: See ethernet.txt in the same directory.
+- phy-handle: See ethernet.txt in the same directory.
+- phy-addr: See ethernet.txt in the same directory. A configuration should
+		include phy-handle or phy-addr.
+- altr,has-supplementary-unicast:
+		If present, TSE supports additional unicast addresses.
+		Otherwise additional unicast addresses are not supported.
+- altr,has-hash-multicast-filter:
+		If present, TSE supports a hash based multicast filter.
+		Otherwise, hash-based multicast filtering is not supported.
+
+- mdio device tree subnode: When the TSE has a phy connected to its local
+		mdio, there must be device tree subnode with the following
+		required properties:
+
+	- compatible: Must be "altr,tse-mdio".
+	- #address-cells: Must be <1>.
+	- #size-cells: Must be <0>.
+
+	For each phy on the mdio bus, there must be a node with the following
+	fields:
+
+	- reg: phy id used to communicate to phy.
+	- device_type: Must be "ethernet-phy".
+
+The MAC address will be determined using the optional properties defined in
+ethernet.txt.
+
+Example:
+
+	tse_sub_0_eth_tse_0: ethernet@1,00000000 {
+		compatible = "altr,tse-msgdma-1.0";
+		reg =	<0x00000001 0x00000000 0x00000400>,
+			<0x00000001 0x00000460 0x00000020>,
+			<0x00000001 0x00000480 0x00000020>,
+			<0x00000001 0x000004A0 0x00000008>,
+			<0x00000001 0x00000400 0x00000020>,
+			<0x00000001 0x00000420 0x00000020>;
+		reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc";
+		interrupt-parent = <&hps_0_arm_gic_0>;
+		interrupts = <0 41 4>, <0 40 4>;
+		interrupt-names = "rx_irq", "tx_irq";
+		rx-fifo-depth = <2048>;
+		tx-fifo-depth = <2048>;
+		address-bits = <48>;
+		max-frame-size = <1500>;
+		local-mac-address = [ 00 00 00 00 00 00 ];
+		phy-mode = "gmii";
+		altr,has-supplementary-unicast;
+		altr,has-hash-multicast-filter;
+		phy-handle = <&phy0>;
+		mdio {
+			compatible = "altr,tse-mdio";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			phy0: ethernet-phy@0 {
+				reg = <0x0>;
+				device_type = "ethernet-phy";
+			};
+
+			phy1: ethernet-phy@1 {
+				reg = <0x1>;
+				device_type = "ethernet-phy";
+			};
+
+		};
+	};
+
+	tse_sub_1_eth_tse_0: ethernet@1,00001000 {
+		compatible = "altr,tse-msgdma-1.0";
+		reg = 	<0x00000001 0x00001000 0x00000400>,
+			<0x00000001 0x00001460 0x00000020>,
+			<0x00000001 0x00001480 0x00000020>,
+			<0x00000001 0x000014A0 0x00000008>,
+			<0x00000001 0x00001400 0x00000020>,
+			<0x00000001 0x00001420 0x00000020>;
+		reg-names = "control_port", "rx_csr", "rx_desc", "rx_resp", "tx_csr", "tx_desc";
+		interrupt-parent = <&hps_0_arm_gic_0>;
+		interrupts = <0 43 4>, <0 42 4>;
+		interrupt-names = "rx_irq", "tx_irq";
+		rx-fifo-depth = <2048>;
+		tx-fifo-depth = <2048>;
+		address-bits = <48>;
+		max-frame-size = <1500>;
+		local-mac-address = [ 00 00 00 00 00 00 ];
+		phy-mode = "gmii";
+		altr,has-supplementary-unicast;
+		altr,has-hash-multicast-filter;
+		phy-handle = <&phy1>;
+	};