Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 83 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/net/mscc-ocelot.txt b/Documentation/devicetree/bindings/net/mscc-ocelot.txt
new file mode 100644
index 000000000..3b6290b45
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/mscc-ocelot.txt
@@ -0,0 +1,83 @@
+Microsemi Ocelot network Switch
+===============================
+
+The Microsemi Ocelot network switch can be found on Microsemi SoCs (VSC7513,
+VSC7514)
+
+Required properties:
+- compatible: Should be "mscc,vsc7514-switch"
+- reg: Must contain an (offset, length) pair of the register set for each
+  entry in reg-names.
+- reg-names: Must include the following entries:
+  - "sys"
+  - "rew"
+  - "qs"
+  - "ptp" (optional due to backward compatibility)
+  - "qsys"
+  - "ana"
+  - "portX" with X from 0 to the number of last port index available on that
+    switch
+- interrupts: Should contain the switch interrupts for frame extraction,
+  frame injection and PTP ready.
+- interrupt-names: should contain the interrupt names: "xtr", "inj". Can contain
+  "ptp_rdy" which is optional due to backward compatibility.
+- ethernet-ports: A container for child nodes representing switch ports.
+
+The ethernet-ports container has the following properties
+
+Required properties:
+
+- #address-cells: Must be 1
+- #size-cells: Must be 0
+
+Each port node must have the following mandatory properties:
+- reg: Describes the port address in the switch
+
+Port nodes may also contain the following optional standardised
+properties, described in binding documents:
+
+- phy-handle: Phandle to a PHY on an MDIO bus. See
+  Documentation/devicetree/bindings/net/ethernet.txt for details.
+
+Example:
+
+	switch@1010000 {
+		compatible = "mscc,vsc7514-switch";
+		reg = <0x1010000 0x10000>,
+		      <0x1030000 0x10000>,
+		      <0x1080000 0x100>,
+		      <0x10e0000 0x10000>,
+		      <0x11e0000 0x100>,
+		      <0x11f0000 0x100>,
+		      <0x1200000 0x100>,
+		      <0x1210000 0x100>,
+		      <0x1220000 0x100>,
+		      <0x1230000 0x100>,
+		      <0x1240000 0x100>,
+		      <0x1250000 0x100>,
+		      <0x1260000 0x100>,
+		      <0x1270000 0x100>,
+		      <0x1280000 0x100>,
+		      <0x1800000 0x80000>,
+		      <0x1880000 0x10000>;
+		reg-names = "sys", "rew", "qs", "ptp", "port0", "port1",
+			    "port2", "port3", "port4", "port5", "port6",
+			    "port7", "port8", "port9", "port10", "qsys",
+			    "ana";
+		interrupts = <18 21 22>;
+		interrupt-names = "ptp_rdy", "xtr", "inj";
+
+		ethernet-ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port0: port@0 {
+				reg = <0>;
+				phy-handle = <&phy0>;
+			};
+			port1: port@1 {
+				reg = <1>;
+				phy-handle = <&phy1>;
+			};
+		};
+	};