Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 43 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/net/nfc/trf7970a.txt b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
new file mode 100644
index 000000000..ba1934b95
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/nfc/trf7970a.txt
@@ -0,0 +1,43 @@
+* Texas Instruments TRF7970A RFID/NFC/15693 Transceiver
+
+Required properties:
+- compatible: Should be "ti,trf7970a".
+- spi-max-frequency: Maximum SPI frequency (<= 2000000).
+- interrupts: A single interrupt specifier.
+- ti,enable-gpios: One or two GPIO entries used for 'EN' and 'EN2' pins on the
+  TRF7970A. EN2 is optional.
+- vin-supply: Regulator for supply voltage to VIN pin
+
+Optional SoC Specific Properties:
+- pinctrl-names: Contains only one value - "default".
+- pintctrl-0: Specifies the pin control groups used for this controller.
+- autosuspend-delay: Specify autosuspend delay in milliseconds.
+- irq-status-read-quirk: Specify that the trf7970a being used has the
+  "IRQ Status Read" erratum.
+- en2-rf-quirk: Specify that the trf7970a being used has the "EN2 RF"
+  erratum.
+- vdd-io-supply: Regulator specifying voltage for vdd-io
+- clock-frequency: Set to specify that the input frequency to the trf7970a is 13560000Hz or 27120000Hz
+
+Example (for ARM-based BeagleBone with TRF7970A on SPI1):
+
+&spi1 {
+
+	nfc@0 {
+		compatible = "ti,trf7970a";
+		reg = <0>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&trf7970a_default>;
+		spi-max-frequency = <2000000>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <14 0>;
+		ti,enable-gpios = <&gpio2 2 GPIO_ACTIVE_HIGH>,
+				  <&gpio2 5 GPIO_ACTIVE_HIGH>;
+		vin-supply = <&ldo3_reg>;
+		vdd-io-supply = <&ldo2_reg>;
+		autosuspend-delay = <30000>;
+		irq-status-read-quirk;
+		en2-rf-quirk;
+		clock-frequency = <27120000>;
+	};
+};