Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 43 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/net/smsc911x.txt b/Documentation/devicetree/bindings/net/smsc911x.txt
new file mode 100644
index 000000000..acfafc8e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/smsc911x.txt
@@ -0,0 +1,43 @@
+* Smart Mixed-Signal Connectivity (SMSC) LAN911x/912x Controller
+
+Required properties:
+- compatible : Should be "smsc,lan<model>", "smsc,lan9115"
+- reg : Address and length of the io space for SMSC LAN
+- interrupts : one or two interrupt specifiers
+  - The first interrupt is the SMSC LAN interrupt line
+  - The second interrupt (if present) is the PME (power
+    management event) interrupt that is able to wake up the host
+     system with a 50ms pulse on network activity
+- phy-mode : See ethernet.txt file in the same directory
+
+Optional properties:
+- reg-shift : Specify the quantity to shift the register offsets by
+- reg-io-width : Specify the size (in bytes) of the IO accesses that
+  should be performed on the device.  Valid value for SMSC LAN is
+  2 or 4.  If it's omitted or invalid, the size would be 2.
+- smsc,irq-active-high : Indicates the IRQ polarity is active-high
+- smsc,irq-push-pull : Indicates the IRQ type is push-pull
+- smsc,force-internal-phy : Forces SMSC LAN controller to use
+  internal PHY
+- smsc,force-external-phy : Forces SMSC LAN controller to use
+  external PHY
+- smsc,save-mac-address : Indicates that mac address needs to be saved
+  before resetting the controller
+- reset-gpios : a GPIO line connected to the RESET (active low) signal
+  of the device. On many systems this is wired high so the device goes
+  out of reset at power-on, but if it is under program control, this
+  optional GPIO can wake up in response to it.
+- vdd33a-supply, vddvario-supply : 3.3V analog and IO logic power supplies
+
+Examples:
+
+lan9220@f4000000 {
+	compatible = "smsc,lan9220", "smsc,lan9115";
+	reg = <0xf4000000 0x2000000>;
+	phy-mode = "mii";
+	interrupt-parent = <&gpio1>;
+	interrupts = <31>, <32>;
+	reset-gpios = <&gpio1 30 GPIO_ACTIVE_LOW>;
+	reg-io-width = <4>;
+	smsc,irq-push-pull;
+};