diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/devicetree/bindings/pci/designware-pcie.txt | |
parent | Initial commit. (diff) | |
download | linux-upstream/5.10.209.tar.xz linux-upstream/5.10.209.zip |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | Documentation/devicetree/bindings/pci/designware-pcie.txt | 77 |
1 files changed, 77 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pci/designware-pcie.txt b/Documentation/devicetree/bindings/pci/designware-pcie.txt new file mode 100644 index 000000000..78494c405 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/designware-pcie.txt @@ -0,0 +1,77 @@ +* Synopsys DesignWare PCIe interface + +Required properties: +- compatible: + "snps,dw-pcie" for RC mode; + "snps,dw-pcie-ep" for EP mode; +- reg: For designware cores version < 4.80 contains the configuration + address space. For designware core version >= 4.80, contains + the configuration and ATU address space +- reg-names: Must be "config" for the PCIe configuration space and "atu" for + the ATU address space. + (The old way of getting the configuration address space from "ranges" + is deprecated and should be avoided.) +RC mode: +- #address-cells: set to <3> +- #size-cells: set to <2> +- device_type: set to "pci" +- ranges: ranges for the PCI memory and I/O regions +- #interrupt-cells: set to <1> +- interrupt-map-mask and interrupt-map: standard PCI + properties to define the mapping of the PCIe interface to interrupt + numbers. +EP mode: +- num-ib-windows: number of inbound address translation windows +- num-ob-windows: number of outbound address translation windows + +Optional properties: +- num-lanes: number of lanes to use (this property should be specified unless + the link is brought already up in BIOS) +- reset-gpio: GPIO pin number of power good signal +- clocks: Must contain an entry for each entry in clock-names. + See ../clocks/clock-bindings.txt for details. +- clock-names: Must include the following entries: + - "pcie" + - "pcie_bus" +- snps,enable-cdm-check: This is a boolean property and if present enables + automatic checking of CDM (Configuration Dependent Module) registers + for data corruption. CDM registers include standard PCIe configuration + space registers, Port Logic registers, DMA and iATU (internal Address + Translation Unit) registers. +RC mode: +- num-viewport: number of view ports configured in hardware. If a platform + does not specify it, the driver assumes 2. +- bus-range: PCI bus numbers covered (it is recommended for new devicetrees + to specify this property, to keep backwards compatibility a range of + 0x00-0xff is assumed if not present) + +EP mode: +- max-functions: maximum number of functions that can be configured + +Example configuration: + + pcie: pcie@dfc00000 { + compatible = "snps,dw-pcie"; + reg = <0xdfc00000 0x0001000>, /* IP registers */ + <0xd0000000 0x0002000>; /* Configuration space */ + reg-names = "dbi", "config"; + #address-cells = <3>; + #size-cells = <2>; + device_type = "pci"; + ranges = <0x81000000 0 0x00000000 0xde000000 0 0x00010000 + 0x82000000 0 0xd0400000 0xd0400000 0 0x0d000000>; + interrupts = <25>, <24>; + #interrupt-cells = <1>; + num-lanes = <1>; + }; +or + pcie: pcie@dfc00000 { + compatible = "snps,dw-pcie-ep"; + reg = <0xdfc00000 0x0001000>, /* IP registers 1 */ + <0xdfc01000 0x0001000>, /* IP registers 2 */ + <0xd0000000 0x2000000>; /* Configuration space */ + reg-names = "dbi", "dbi2", "addr_space"; + num-ib-windows = <6>; + num-ob-windows = <2>; + num-lanes = <1>; + }; |