diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt | |
parent | Initial commit. (diff) | |
download | linux-430c2fc249ea5c0536abd21c23382884005c9093.tar.xz linux-430c2fc249ea5c0536abd21c23382884005c9093.zip |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt')
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt | 170 |
1 files changed, 170 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt new file mode 100644 index 000000000..d13ff82f8 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/actions,s700-pinctrl.txt @@ -0,0 +1,170 @@ +Actions Semi S700 Pin Controller + +This binding describes the pin controller found in the S700 SoC. + +Required Properties: + +- compatible: Should be "actions,s700-pinctrl" +- reg: Should contain the register base address and size of + the pin controller. +- clocks: phandle of the clock feeding the pin controller +- gpio-controller: Marks the device node as a GPIO controller. +- gpio-ranges: Specifies the mapping between gpio controller and + pin-controller pins. +- #gpio-cells: Should be two. The first cell is the gpio pin number + and the second cell is used for optional parameters. +- interrupt-controller: Marks the device node as an interrupt controller. +- #interrupt-cells: Specifies the number of cells needed to encode an + interrupt. Shall be set to 2. The first cell + defines the interrupt number, the second encodes + the trigger flags described in + bindings/interrupt-controller/interrupts.txt +- interrupts: The interrupt outputs from the controller. There is one GPIO + interrupt per GPIO bank. The number of interrupts listed depends + on the number of GPIO banks on the SoC. The interrupts must be + ordered by bank, starting with bank 0. + +Please refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning of the +phrase "pin configuration node". + +The pin configuration nodes act as a container for an arbitrary number of +subnodes. Each of these subnodes represents some desired configuration for a +pin, a group, or a list of pins or groups. This configuration can include the +mux function to select on those group(s), and various pin configuration +parameters, such as pull-up, drive strength, etc. + +PIN CONFIGURATION NODES: + +The name of each subnode is not important; all subnodes should be enumerated +and processed purely based on their content. + +Each subnode only affects those parameters that are explicitly listed. In +other words, a subnode that lists a mux function but no pin configuration +parameters implies no information about any pin configuration parameters. +Similarly, a pin subnode that describes a pullup parameter implies no +information about e.g. the mux function. + +Pinmux functions are available only for the pin groups while pinconf +parameters are available for both pin groups and individual pins. + +The following generic properties as defined in pinctrl-bindings.txt are valid +to specify in a pin configuration subnode: + +Required Properties: + +- pins: An array of strings, each string containing the name of a pin. + These pins are used for selecting the pull control and schmitt + trigger parameters. The following are the list of pins + available: + + eth_txd0, eth_txd1, eth_txd2, eth_txd3, eth_txen, eth_rxer, + eth_crs_dv, eth_rxd1, eth_rxd0, eth_rxd2, eth_rxd3, eth_ref_clk, + eth_mdc, eth_mdio, sirq0, sirq1, sirq2, i2s_d0, i2s_bclk0, + i2s_lrclk0, i2s_mclk0, i2s_d1, i2s_bclk1, i2s_lrclk1, i2s_mclk1, + pcm1_in, pcm1_clk, pcm1_sync, pcm1_out, ks_in0, ks_in1, ks_in2, + ks_in3, ks_out0, ks_out1, ks_out2, lvds_oep, lvds_oen, lvds_odp, + lvds_odn, lvds_ocp, lvds_ocn, lvds_obp, lvds_obn, lvds_oap, + lvds_oan, lvds_eep, lvds_een, lvds_edp, lvds_edn, lvds_ecp, + lvds_ecn, lvds_ebp, lvds_ebn, lvds_eap, lvds_ean, lcd0_d18, + lcd0_d2, dsi_dp3, dsi_dn3, dsi_dp1, dsi_dn1, dsi_cp, dsi_cn, + dsi_dp0, dsi_dn0, dsi_dp2, dsi_dn2, sd0_d0, sd0_d1, sd0_d2, + sd0_d3, sd1_d0, sd1_d1, sd1_d2, sd1_d3, sd0_cmd, sd0_clk, + sd1_cmd, sd1_clk, spi0_ss, spi0_miso, uart0_rx, uart0_tx, + uart2_rx, uart2_tx, uart2_rtsb, uart2_ctsb, uart3_rx, uart3_tx, + uart3_rtsb, uart3_ctsb, i2c0_sclk, i2c0_sdata, i2c1_sclk, + i2c1_sdata, i2c2_sdata, csi_dn0, csi_dp0, csi_dn1, csi_dp1, + csi_cn, csi_cp, csi_dn2, csi_dp2, csi_dn3, csi_dp3, + sensor0_pclk, sensor0_ckout, dnand_d0, dnand_d1, dnand_d2, + dnand_d3, dnand_d4, dnand_d5, dnand_d6, dnand_d7, dnand_wrb, + dnand_rdb, dnand_rdbn, dnand_dqs, dnand_dqsn, dnand_rb0, + dnand_ale, dnand_cle, dnand_ceb0, dnand_ceb1, dnand_ceb2, + dnand_ceb3, porb, clko_25m, bsel, pkg0, pkg1, pkg2, pkg3 + +- groups: An array of strings, each string containing the name of a pin + group. These pin groups are used for selecting the pinmux + functions. + rgmii_txd23_mfp, rgmii_rxd2_mfp, rgmii_rxd3_mfp, lcd0_d18_mfp, + rgmii_txd01_mfp, rgmii_txd0_mfp, rgmii_txd1_mfp, rgmii_txen_mfp, + rgmii_rxen_mfp, rgmii_rxd1_mfp, rgmii_rxd0_mfp, rgmii_ref_clk_mfp, + i2s_d0_mfp, i2s_pcm1_mfp, i2s0_pcm0_mfp, i2s1_pcm0_mfp, + i2s_d1_mfp, ks_in2_mfp, ks_in1_mfp, ks_in0_mfp, ks_in3_mfp, + ks_out0_mfp, ks_out1_mfp, ks_out2_mfp, lvds_o_pn_mfp, dsi_dn0_mfp, + dsi_dp2_mfp, lcd0_d2_mfp, dsi_dp3_mfp, dsi_dn3_mfp, dsi_dp0_mfp, + lvds_ee_pn_mfp, uart2_rx_tx_mfp, spi0_i2c_pcm_mfp, dsi_dnp1_cp_d2_mfp, + dsi_dnp1_cp_d17_mfp, lvds_e_pn_mfp, dsi_dn2_mfp, uart2_rtsb_mfp, + uart2_ctsb_mfp, uart3_rtsb_mfp, uart3_ctsb_mfp, sd0_d0_mfp, sd0_d1_mfp, + sd0_d2_d3_mfp, sd1_d0_d3_mfp, sd0_cmd_mfp, sd0_clk_mfp, sd1_cmd_mfp, + uart0_rx_mfp, clko_25m_mfp, csi_cn_cp_mfp, sens0_ckout_mfp, uart0_tx_mfp, + i2c0_mfp, csi_dn_dp_mfp, sen0_pclk_mfp, pcm1_in_mfp, pcm1_clk_mfp, + pcm1_sync_mfp, pcm1_out_mfp, dnand_data_wr_mfp, dnand_acle_ce0_mfp, + nand_ceb2_mfp, nand_ceb3_mfp + + These pin groups are used for selecting the drive strength + parameters. + + sirq_drv, rgmii_txd23_drv, rgmii_rxd23_drv, rgmii_txd01_txen_drv, + rgmii_rxer_drv, rgmii_crs_drv, rgmii_rxd10_drv, rgmii_ref_clk_drv, + smi_mdc_mdio_drv, i2s_d0_drv, i2s_bclk0_drv, i2s3_drv, i2s13_drv, + pcm1_drv, ks_in_drv, ks_out_drv, lvds_all_drv, lcd_d18_d2_drv, + dsi_all_drv, sd0_d0_d3_drv, sd0_cmd_drv, sd0_clk_drv, spi0_all_drv, + uart0_rx_drv, uart0_tx_drv, uart2_all_drv, i2c0_all_drv, i2c12_all_drv, + sens0_pclk_drv, sens0_ckout_drv, uart3_all_drv + +- function: An array of strings, each string containing the name of the + pinmux functions. These functions can only be selected by + the corresponding pin groups. The following are the list of + pinmux functions available: + + nor, eth_rgmii, eth_sgmii, spi0, spi1, spi2, spi3, seNs0, sens1, + uart0, uart1, uart2, uart3, uart4, uart5, uart6, i2s0, i2s1, + pcm1, pcm0, ks, jtag, pwm0, pwm1, pwm2, pwm3, pwm4, pwm5, p0, + sd0, sd1, sd2, i2c0, i2c1, i2c2, i2c3, dsi, lvds, usb30, + clko_25m, mipi_csi, nand, spdif, sirq0, sirq1, sirq2, bt, lcd0 + +Optional Properties: + +- bias-pull-down: No arguments. The specified pins should be configured as + pull down. +- bias-pull-up: No arguments. The specified pins should be configured as + pull up. +- input-schmitt-enable: No arguments: Enable schmitt trigger for the specified + pins +- input-schmitt-disable: No arguments: Disable schmitt trigger for the specified + pins +- drive-strength: Integer. Selects the drive strength for the specified + pins in mA. + Valid values are: + <2> + <4> + <8> + <12> + +Example: + + pinctrl: pinctrl@e01b0000 { + compatible = "actions,s700-pinctrl"; + reg = <0x0 0xe01b0000 0x0 0x1000>; + clocks = <&cmu CLK_GPIO>; + gpio-controller; + gpio-ranges = <&pinctrl 0 0 136>; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>; + + uart3-default: uart3-default { + pinmux { + groups = "uart3_rtsb_mfp", "uart3_ctsb_mfp"; + function = "uart3"; + }; + pinconf { + groups = "uart3_all_drv"; + drive-strength = <2>; + }; + }; + }; |