diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt | |
parent | Initial commit. (diff) | |
download | linux-upstream/5.10.209.tar.xz linux-upstream/5.10.209.zip |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt | 87 |
1 files changed, 87 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt new file mode 100644 index 000000000..678f50970 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/axis,artpec6-pinctrl.txt @@ -0,0 +1,87 @@ +Axis ARTPEC-6 Pin Controller + +Required properties: +- compatible: "axis,artpec6-pinctrl". +- reg: Should contain the register physical address and length for the pin + controller. + +A pinctrl node should contain at least one subnode representing the pinctrl +groups available on the machine. Each subnode will list the mux function +required and what pin group it will use. Each subnode will also configure the +drive strength and bias pullup of the pin group. If either of these options is +not set, its actual value will be unspecified. + + +Required subnode-properties: +- function: Function to mux. +- groups: Name of the pin group to use for the function above. + + Available functions and groups (function: group0, group1...): + gpio: cpuclkoutgrp0, udlclkoutgrp0, i2c1grp0, i2c2grp0, + i2c3grp0, i2s0grp0, i2s1grp0, i2srefclkgrp0, spi0grp0, + spi1grp0, pciedebuggrp0, uart0grp0, uart0grp1, uart0grp2, + uart1grp0, uart1grp1, uart2grp0, uart2grp1, uart2grp2, + uart3grp0, uart4grp0, uart4grp1, uart5grp0, uart5grp1, + uart5nocts + cpuclkout: cpuclkoutgrp0 + udlclkout: udlclkoutgrp0 + i2c1: i2c1grp0 + i2c2: i2c2grp0 + i2c3: i2c3grp0 + i2s0: i2s0grp0 + i2s1: i2s1grp0 + i2srefclk: i2srefclkgrp0 + spi0: spi0grp0 + spi1: spi1grp0 + pciedebug: pciedebuggrp0 + uart0: uart0grp0, uart0grp1, uart0grp2 + uart1: uart1grp0, uart1grp1 + uart2: uart2grp0, uart2grp1, uart2grp2 + uart3: uart3grp0 + uart4: uart4grp0, uart4grp1 + uart5: uart5grp0, uart5grp1, uart5nocts + nand: nandgrp0 + sdio0: sdio0grp0 + sdio1: sdio1grp0 + ethernet: ethernetgrp0 + + +Optional subnode-properties (see pinctrl-bindings.txt): +- drive-strength: 4, 6, 8, 9 mA. For SD and NAND pins, this is for 3.3V VCCQ3. +- bias-pull-up +- bias-disable + +Examples: +pinctrl@f801d000 { + compatible = "axis,artpec6-pinctrl"; + reg = <0xf801d000 0x400>; + + pinctrl_uart0: uart0grp { + function = "uart0"; + groups = "uart0grp0"; + drive-strength = <4>; + bias-pull-up; + }; + pinctrl_uart3: uart3grp { + function = "uart3"; + groups = "uart3grp0"; + }; +}; +uart0: uart@f8036000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xf8036000 0x1000>; + interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pll2div24>, <&apb_pclk>; + clock-names = "uart_clk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart0>; +}; +uart3: uart@f8039000 { + compatible = "arm,pl011", "arm,primecell"; + reg = <0xf8039000 0x1000>; + interrupts = <0 128 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&pll2div24>, <&apb_pclk>; + clock-names = "uart_clk", "apb_pclk"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_uart3>; +}; |