diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/devicetree/bindings/power/reset | |
parent | Initial commit. (diff) | |
download | linux-upstream/5.10.209.tar.xz linux-upstream/5.10.209.zip |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/devicetree/bindings/power/reset')
20 files changed, 699 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/power/reset/axxia-reset.txt b/Documentation/devicetree/bindings/power/reset/axxia-reset.txt new file mode 100644 index 000000000..47e720d24 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/axxia-reset.txt @@ -0,0 +1,20 @@ +Axxia Restart Driver + +This driver can do reset of the Axxia SoC. It uses the registers in the syscon +block to initiate a chip reset. + +Required Properties: + -compatible: "lsi,axm55xx-reset" + -syscon: phandle to the syscon node. + +Example: + + syscon: syscon@2010030000 { + compatible = "lsi,axxia-syscon", "syscon"; + reg = <0x20 0x10030000 0 0x2000>; + }; + + reset: reset@2010031000 { + compatible = "lsi,axm55xx-reset"; + syscon = <&syscon>; + }; diff --git a/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.txt b/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.txt new file mode 100644 index 000000000..93f31ca1e --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/brcm,bcm21664-resetmgr.txt @@ -0,0 +1,14 @@ +Broadcom Kona Family Reset Manager +---------------------------------- + +The reset manager is used on the Broadcom BCM21664 SoC. + +Required properties: + - compatible: brcm,bcm21664-resetmgr + - reg: memory address & range + +Example: + brcm,resetmgr@35001f00 { + compatible = "brcm,bcm21664-resetmgr"; + reg = <0x35001f00 0x24>; + }; diff --git a/Documentation/devicetree/bindings/power/reset/gemini-poweroff.txt b/Documentation/devicetree/bindings/power/reset/gemini-poweroff.txt new file mode 100644 index 000000000..7fec3e100 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/gemini-poweroff.txt @@ -0,0 +1,17 @@ +* Device-Tree bindings for Cortina Systems Gemini Poweroff + +This is a special IP block in the Cortina Gemini SoC that only +deals with different ways to power the system down. + +Required properties: +- compatible: should be "cortina,gemini-power-controller" +- reg: should contain the physical memory base and size +- interrupts: should contain the power management interrupt + +Example: + +power-controller@4b000000 { + compatible = "cortina,gemini-power-controller"; + reg = <0x4b000000 0x100>; + interrupts = <26 IRQ_TYPE_EDGE_FALLING>; +}; diff --git a/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt new file mode 100644 index 000000000..3e56c1b34 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/gpio-poweroff.txt @@ -0,0 +1,41 @@ +Driver a GPIO line that can be used to turn the power off. + +The driver supports both level triggered and edge triggered power off. +At driver load time, the driver will request the given gpio line and +install a handler to power off the system. If the optional properties +'input' is not found, the GPIO line will be driven in the inactive +state. Otherwise its configured as an input. + +When the power-off handler is called, the gpio is configured as an +output, and drive active, so triggering a level triggered power off +condition. This will also cause an inactive->active edge condition, so +triggering positive edge triggered power off. After a delay of 100ms, +the GPIO is set to inactive, thus causing an active->inactive edge, +triggering negative edge triggered power off. After another 100ms +delay the GPIO is driver active again. If the power is still on and +the CPU still running after a 3000ms delay, a WARN_ON(1) is emitted. + +Required properties: +- compatible : should be "gpio-poweroff". +- gpios : The GPIO to set high/low, see "gpios property" in + Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be + low to power down the board set it to "Active Low", otherwise set + gpio to "Active High". + +Optional properties: +- input : Initially configure the GPIO line as an input. Only reconfigure + it to an output when the power-off handler is called. If this optional + property is not specified, the GPIO is initialized as an output in its + inactive state. +- active-delay-ms: Delay (default 100) to wait after driving gpio active +- inactive-delay-ms: Delay (default 100) to wait after driving gpio inactive +- timeout-ms: Time to wait before asserting a WARN_ON(1). If nothing is + specified, 3000 ms is used. + +Examples: + +gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio 4 0>; + timeout-ms = <3000>; +}; diff --git a/Documentation/devicetree/bindings/power/reset/gpio-restart.txt b/Documentation/devicetree/bindings/power/reset/gpio-restart.txt new file mode 100644 index 000000000..af3701bc1 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/gpio-restart.txt @@ -0,0 +1,54 @@ +Drive a GPIO line that can be used to restart the system from a restart +handler. + +This binding supports level and edge triggered reset. At driver load +time, the driver will request the given gpio line and install a restart +handler. If the optional properties 'open-source' is not found, the GPIO line +will be driven in the inactive state. Otherwise its not driven until +the restart is initiated. + +When the system is restarted, the restart handler will be invoked in +priority order. The gpio is configured as an output, and driven active, +triggering a level triggered reset condition. This will also cause an +inactive->active edge condition, triggering positive edge triggered +reset. After a delay specified by active-delay, the GPIO is set to +inactive, thus causing an active->inactive edge, triggering negative edge +triggered reset. After a delay specified by inactive-delay, the GPIO +is driven active again. After a delay specified by wait-delay, the +restart handler completes allowing other restart handlers to be attempted. + +Required properties: +- compatible : should be "gpio-restart". +- gpios : The GPIO to set high/low, see "gpios property" in + Documentation/devicetree/bindings/gpio/gpio.txt. If the pin should be + low to reset the board set it to "Active Low", otherwise set + gpio to "Active High". + +Optional properties: +- open-source : Treat the GPIO as being open source and defer driving + it to when the restart is initiated. If this optional property is not + specified, the GPIO is initialized as an output in its inactive state. +- priority : A priority ranging from 0 to 255 (default 128) according to + the following guidelines: + 0: Restart handler of last resort, with limited restart + capabilities + 128: Default restart handler; use if no other restart handler is + expected to be available, and/or if restart functionality is + sufficient to restart the entire system + 255: Highest priority restart handler, will preempt all other + restart handlers +- active-delay: Delay (default 100) to wait after driving gpio active [ms] +- inactive-delay: Delay (default 100) to wait after driving gpio inactive [ms] +- wait-delay: Delay (default 3000) to wait after completing restart + sequence [ms] + +Examples: + +gpio-restart { + compatible = "gpio-restart"; + gpios = <&gpio 4 0>; + priority = <128>; + active-delay = <100>; + inactive-delay = <100>; + wait-delay = <3000>; +}; diff --git a/Documentation/devicetree/bindings/power/reset/keystone-reset.txt b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt new file mode 100644 index 000000000..c5c03789e --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/keystone-reset.txt @@ -0,0 +1,67 @@ +* Device tree bindings for Texas Instruments keystone reset + +This node is intended to allow SoC reset in case of software reset +of selected watchdogs. + +The Keystone SoCs can contain up to 4 watchdog timers to reset +SoC. Each watchdog timer event input is connected to the Reset Mux +block. The Reset Mux block can be configured to cause reset or not. + +Additionally soft or hard reset can be configured. + +Required properties: + +- compatible: ti,keystone-reset + +- ti,syscon-pll: phandle/offset pair. The phandle to syscon used to + access pll controller registers and the offset to use + reset control registers. + +- ti,syscon-dev: phandle/offset pair. The phandle to syscon used to + access device state control registers and the offset + in order to use mux block registers for all watchdogs. + +Optional properties: + +- ti,soft-reset: Boolean option indicating soft reset. + By default hard reset is used. + +- ti,wdt-list: WDT list that can cause SoC reset. It's not related + to WDT driver, it's just needed to enable a SoC related + reset that's triggered by one of WDTs. The list is + in format: <0>, <2>; It can be in random order and + begins from 0 to 3, as keystone can contain up to 4 SoC + reset watchdogs and can be in random order. + +Example 1: +Setup keystone reset so that in case software reset or +WDT0 is triggered it issues hard reset for SoC. + +pllctrl: pll-controller@2310000 { + compatible = "ti,keystone-pllctrl", "syscon"; + reg = <0x02310000 0x200>; +}; + +devctrl: device-state-control@2620000 { + compatible = "ti,keystone-devctrl", "syscon"; + reg = <0x02620000 0x1000>; +}; + +rstctrl: reset-controller { + compatible = "ti,keystone-reset"; + ti,syscon-pll = <&pllctrl 0xe4>; + ti,syscon-dev = <&devctrl 0x328>; + ti,wdt-list = <0>; +}; + +Example 2: +Setup keystone reset so that in case of software reset or +WDT0 or WDT2 is triggered it issues soft reset for SoC. + +rstctrl: reset-controller { + compatible = "ti,keystone-reset"; + ti,syscon-pll = <&pllctrl 0xe4>; + ti,syscon-dev = <&devctrl 0x328>; + ti,wdt-list = <0>, <2>; + ti,soft-reset; +}; diff --git a/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt new file mode 100644 index 000000000..cd2d7f58a --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/ltc2952-poweroff.txt @@ -0,0 +1,29 @@ +Binding for the LTC2952 PowerPath controller + +This chip is used to externally trigger a system shut down. Once the trigger has +been sent, the chip's watchdog has to be reset to gracefully shut down. +A full powerdown can be triggered via the kill signal. + +Required properties: + +- compatible: Must contain: "lltc,ltc2952" +- watchdog-gpios: phandle + gpio-specifier for the GPIO connected to the + chip's watchdog line +- kill-gpios: phandle + gpio-specifier for the GPIO connected to the + chip's kill line + +Optional properties: +- trigger-gpios: phandle + gpio-specifier for the GPIO connected to the + chip's trigger line. If this property is not set, the + trigger function is ignored and the chip is kept alive + until an explicit kill signal is received + +Example: + +ltc2952 { + compatible = "lltc,ltc2952"; + + trigger-gpios = <&gpio0 1 GPIO_ACTIVE_LOW>; + watchdog-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>; + kill-gpios = <&gpio0 2 GPIO_ACTIVE_LOW>; +}; diff --git a/Documentation/devicetree/bindings/power/reset/msm-poweroff.txt b/Documentation/devicetree/bindings/power/reset/msm-poweroff.txt new file mode 100644 index 000000000..ce44ad357 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/msm-poweroff.txt @@ -0,0 +1,17 @@ +MSM Restart Driver + +A power supply hold (ps-hold) bit is set to power the msm chipsets. +Clearing that bit allows us to restart/poweroff. The difference +between poweroff and restart is determined by unique power manager IC +settings. + +Required Properties: +-compatible: "qcom,pshold" +-reg: Specifies the physical address of the ps-hold register + +Example: + + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; diff --git a/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt new file mode 100644 index 000000000..933f0c48e --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/mt6323-poweroff.txt @@ -0,0 +1,20 @@ +Device Tree Bindings for Power Controller on MediaTek PMIC + +The power controller which could be found on PMIC is responsible for externally +powering off or on the remote MediaTek SoC through the circuit BBPU. + +Required properties: +- compatible: Should be one of follows + "mediatek,mt6323-pwrc": for MT6323 PMIC + +Example: + + pmic { + compatible = "mediatek,mt6323"; + + ... + + power-controller { + compatible = "mediatek,mt6323-pwrc"; + }; + } diff --git a/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt new file mode 100644 index 000000000..752d6126d --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/nvmem-reboot-mode.txt @@ -0,0 +1,26 @@ +NVMEM reboot mode driver + +This driver gets reboot mode magic value from reboot-mode driver +and stores it in a NVMEM cell named "reboot-mode". Then the bootloader +can read it and take different action according to the magic +value stored. + +Required properties: +- compatible: should be "nvmem-reboot-mode". +- nvmem-cells: A phandle to the reboot mode provided by a nvmem device. +- nvmem-cell-names: Should be "reboot-mode". + +The rest of the properties should follow the generic reboot-mode description +found in reboot-mode.txt + +Example: + reboot-mode { + compatible = "nvmem-reboot-mode"; + nvmem-cells = <&reboot_mode>; + nvmem-cell-names = "reboot-mode"; + + mode-normal = <0xAAAA5501>; + mode-bootloader = <0xBBBB5500>; + mode-recovery = <0xCCCC5502>; + mode-test = <0xDDDD5503>; + }; diff --git a/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt new file mode 100644 index 000000000..4d530d815 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/ocelot-reset.txt @@ -0,0 +1,17 @@ +Microsemi Ocelot reset controller + +The DEVCPU_GCB:CHIP_REGS have a SOFT_RST register that can be used to reset the +SoC core. + +The reset registers are both present in the MSCC vcoreiii MIPS and +microchip Sparx5 armv8 SoC's. + +Required Properties: + - compatible: "mscc,ocelot-chip-reset" or "microchip,sparx5-chip-reset" + +Example: + reset@1070008 { + compatible = "mscc,ocelot-chip-reset"; + reg = <0x1070008 0x4>; + }; + diff --git a/Documentation/devicetree/bindings/power/reset/qcom,pon.txt b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt new file mode 100644 index 000000000..0c0dc3a1e --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/qcom,pon.txt @@ -0,0 +1,49 @@ +Qualcomm PON Device + +The Power On device for Qualcomm PM8xxx is MFD supporting pwrkey +and resin along with the Android reboot-mode. + +This DT node has pwrkey and resin as sub nodes. + +Required Properties: +-compatible: Must be one of: + "qcom,pm8916-pon" + "qcom,pms405-pon" + "qcom,pm8998-pon" + +-reg: Specifies the physical address of the pon register + +Optional subnode: +-pwrkey: Specifies the subnode pwrkey and should follow the + qcom,pm8941-pwrkey.txt description. +-resin: Specifies the subnode resin and should follow the + qcom,pm8xxx-pwrkey.txt description. + +The rest of the properties should follow the generic reboot-mode description +found in reboot-mode.txt + +Example: + + pon@800 { + compatible = "qcom,pm8916-pon"; + + reg = <0x800>; + mode-bootloader = <0x2>; + mode-recovery = <0x1>; + + pwrkey { + compatible = "qcom,pm8941-pwrkey"; + interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_POWER>; + }; + + resin { + compatible = "qcom,pm8941-resin"; + interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>; + debounce = <15625>; + bias-pull-up; + linux,code = <KEY_VOLUMEDOWN>; + }; + }; diff --git a/Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt b/Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt new file mode 100644 index 000000000..c363d7173 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/qnap-poweroff.txt @@ -0,0 +1,15 @@ +* QNAP Power Off + +QNAP NAS devices have a microcontroller controlling the main power +supply. This microcontroller is connected to UART1 of the Kirkwood and +Orion5x SoCs. Sending the character 'A', at 19200 baud, tells the +microcontroller to turn the power off. + +Synology NAS devices use a similar scheme, but a different baud rate, +9600, and a different character, '1'. + +Required Properties: +- compatible: Should be "qnap,power-off" or "synology,power-off" + +- reg: Address and length of the register set for UART1 +- clocks: tclk clock diff --git a/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml new file mode 100644 index 000000000..9c6fda6b1 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/reboot-mode.yaml @@ -0,0 +1,49 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/reboot-mode.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic reboot mode core map + +maintainers: + - Andy Yan <andy.yan@rock-chips.com> + +description: | + This driver get reboot mode arguments and call the write + interface to store the magic value in special register + or ram. Then the bootloader can read it and take different + action according to the argument stored. + + All mode properties are vendor specific, it is a indication to tell + the bootloader what to do when the system reboots, and should be named + as mode-xxx = <magic> (xxx is mode name, magic should be a non-zero value). + + For example, modes common Android platform are: + - normal: Normal reboot mode, system reboot with command "reboot". + - recovery: Android Recovery mode, it is a mode to format the device or update a new image. + - bootloader: Android fastboot mode, it's a mode to re-flash partitions on the Android based device. + - loader: A bootloader mode, it's a mode used to download image on Rockchip platform, + usually used in development. + +properties: + mode-normal: + $ref: /schemas/types.yaml#/definitions/uint32 + description: + Default value to set on a reboot if no command was provided. + +patternProperties: + "^mode-.*$": + $ref: /schemas/types.yaml#/definitions/uint32 + +additionalProperties: false + +examples: + - | + reboot-mode { + mode-normal = <0>; + mode-recovery = <1>; + mode-bootloader = <2>; + mode-loader = <3>; + }; +... diff --git a/Documentation/devicetree/bindings/power/reset/restart-poweroff.txt b/Documentation/devicetree/bindings/power/reset/restart-poweroff.txt new file mode 100644 index 000000000..5776e684a --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/restart-poweroff.txt @@ -0,0 +1,8 @@ +* Restart Power Off + +Buffalo Linkstation LS-XHL and LS-CHLv2, and other devices power off +by restarting and letting u-boot keep hold of the machine until the +user presses a button. + +Required Properties: +- compatible: Should be "restart-poweroff" diff --git a/Documentation/devicetree/bindings/power/reset/st-reset.txt b/Documentation/devicetree/bindings/power/reset/st-reset.txt new file mode 100644 index 000000000..b63948737 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/st-reset.txt @@ -0,0 +1,11 @@ +*Device-Tree bindings for ST SW reset functionality + +Required properties: +- compatible: should be "stih407-restart". +- st,syscfg: should be a phandle of the syscfg node. + +Example node: + restart { + compatible = "st,stih407-restart"; + st,syscfg = <&syscfg_sbc_reg>; + }; diff --git a/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml new file mode 100644 index 000000000..3412fe7e1 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/syscon-poweroff.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/syscon-poweroff.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic SYSCON mapped register poweroff driver + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: |+ + This is a generic poweroff driver using syscon to map the poweroff register. + The poweroff is generally performed with a write to the poweroff register + defined by the register map pointed by syscon reference plus the offset + with the value and mask defined in the poweroff node. + Default will be little endian mode, 32 bit access only. + +properties: + compatible: + const: syscon-poweroff + + mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Update only the register bits defined by the mask (32 bit). + + offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Offset in the register map for the poweroff register (in bytes). + + regmap: + $ref: /schemas/types.yaml#/definitions/phandle + description: Phandle to the register map node. + + value: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The poweroff value written to the poweroff register (32 bit access). + +required: + - compatible + - regmap + - offset + +additionalProperties: false + +allOf: + - if: + not: + required: + - mask + then: + required: + - value + +examples: + - | + poweroff { + compatible = "syscon-poweroff"; + regmap = <®mapnode>; + offset = <0x0>; + mask = <0x7a>; + }; diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml new file mode 100644 index 000000000..9b1ffceef --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml @@ -0,0 +1,55 @@ +# SPDX-License-Identifier: GPL-2.0-only +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/syscon-reboot-mode.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic SYSCON reboot mode driver + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: | + This driver gets reboot mode magic value from reboot-mode driver + and stores it in a SYSCON mapped register. Then the bootloader + can read it and take different action according to the magic + value stored. The SYSCON mapped register is retrieved from the + parental dt-node plus the offset. So the SYSCON reboot-mode node + should be represented as a sub-node of a "syscon", "simple-mfd" node. + +properties: + compatible: + const: syscon-reboot-mode + + mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Update only the register bits defined by the mask (32 bit) + + offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Offset in the register map for the mode register (in bytes) + +patternProperties: + "^mode-.+": + $ref: /schemas/types.yaml#/definitions/uint32 + description: Vendor-specific mode value written to the mode register + +additionalProperties: false + +required: + - compatible + - offset + +examples: + - | + #include <dt-bindings/soc/rockchip,boot-mode.h> + + reboot-mode { + compatible = "syscon-reboot-mode"; + offset = <0x40>; + mode-normal = <BOOT_NORMAL>; + mode-recovery = <BOOT_RECOVERY>; + mode-bootloader = <BOOT_FASTBOOT>; + mode-loader = <BOOT_BL_DOWNLOAD>; + }; +... diff --git a/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml new file mode 100644 index 000000000..da2509724 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/syscon-reboot.yaml @@ -0,0 +1,67 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/power/reset/syscon-reboot.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Generic SYSCON mapped register reset driver + +maintainers: + - Sebastian Reichel <sre@kernel.org> + +description: |+ + This is a generic reset driver using syscon to map the reset register. + The reset is generally performed with a write to the reset register + defined by the SYSCON register map base plus the offset with the value and + mask defined in the reboot node. Default will be little endian mode, 32 bit + access only. The SYSCON registers map is normally retrieved from the + parental dt-node. So the SYSCON reboot node should be represented as a + sub-node of a "syscon", "simple-mfd" node. Though the regmap property + pointing to the system controller node is also supported. + +properties: + compatible: + const: syscon-reboot + + mask: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Update only the register bits defined by the mask (32 bit). + + offset: + $ref: /schemas/types.yaml#/definitions/uint32 + description: Offset in the register map for the reboot register (in bytes). + + regmap: + $ref: /schemas/types.yaml#/definitions/phandle + deprecated: true + description: | + Phandle to the register map node. This property is deprecated in favor of + the syscon-reboot node been a child of a system controller node. + + value: + $ref: /schemas/types.yaml#/definitions/uint32 + description: The reset value written to the reboot register (32 bit access). + +required: + - compatible + - offset + +additionalProperties: false + +allOf: + - if: + not: + required: + - mask + then: + required: + - value + +examples: + - | + reboot { + compatible = "syscon-reboot"; + regmap = <®mapnode>; + offset = <0x0>; + mask = <0x1>; + }; diff --git a/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt new file mode 100644 index 000000000..bb529ecf8 --- /dev/null +++ b/Documentation/devicetree/bindings/power/reset/xlnx,zynqmp-power.txt @@ -0,0 +1,61 @@ +-------------------------------------------------------------------- +Device Tree Bindings for the Xilinx Zynq MPSoC Power Management +-------------------------------------------------------------------- +The zynqmp-power node describes the power management configurations. +It will control remote suspend/shutdown interfaces. + +Required properties: + - compatible: Must contain: "xlnx,zynqmp-power" + - interrupts: Interrupt specifier + +Optional properties: + - mbox-names : Name given to channels seen in the 'mboxes' property. + "tx" - Mailbox corresponding to transmit path + "rx" - Mailbox corresponding to receive path + - mboxes : Standard property to specify a Mailbox. Each value of + the mboxes property should contain a phandle to the + mailbox controller device node and an args specifier + that will be the phandle to the intended sub-mailbox + child node to be used for communication. See + Documentation/devicetree/bindings/mailbox/mailbox.txt + for more details about the generic mailbox controller + and client driver bindings. Also see + Documentation/devicetree/bindings/mailbox/ \ + xlnx,zynqmp-ipi-mailbox.txt for typical controller that + is used to communicate with this System controllers. + +-------- +Examples +-------- + +Example with interrupt method: + +firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + + zynqmp_power: zynqmp-power { + compatible = "xlnx,zynqmp-power"; + interrupts = <0 35 4>; + }; + }; +}; + +Example with IPI mailbox method: + +firmware { + zynqmp_firmware: zynqmp-firmware { + compatible = "xlnx,zynqmp-firmware"; + method = "smc"; + + zynqmp_power: zynqmp-power { + compatible = "xlnx,zynqmp-power"; + interrupt-parent = <&gic>; + interrupts = <0 35 4>; + mboxes = <&ipi_mailbox_pmu0 0>, + <&ipi_mailbox_pmu0 1>; + mbox-names = "tx", "rx"; + }; + }; +}; |