Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 48 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/serial/maxim,max310x.txt b/Documentation/devicetree/bindings/serial/maxim,max310x.txt
new file mode 100644
index 000000000..79e10a05a
--- /dev/null
+++ b/Documentation/devicetree/bindings/serial/maxim,max310x.txt
@@ -0,0 +1,48 @@
+* Maxim MAX310X advanced Universal Asynchronous Receiver-Transmitter (UART)
+
+Required properties:
+- compatible: Should be one of the following:
+  - "maxim,max3107" for Maxim MAX3107,
+  - "maxim,max3108" for Maxim MAX3108,
+  - "maxim,max3109" for Maxim MAX3109,
+  - "maxim,max14830" for Maxim MAX14830.
+- reg: SPI chip select number.
+- interrupts: Specifies the interrupt source of the parent interrupt
+  controller. The format of the interrupt specifier depends on the
+  parent interrupt controller.
+- clocks: phandle to the IC source clock.
+- clock-names: Should be "xtal" if clock is an external crystal or
+  "osc" if an external clock source is used.
+
+Optional properties:
+- gpio-controller: Marks the device node as a GPIO controller.
+- #gpio-cells: Should be two. The first cell is the GPIO number and
+  the second cell is used to specify the GPIO polarity:
+    0 = active high,
+    1 = active low.
+
+Example:
+
+/ {
+	clocks {
+		spi_uart_clk: osc_max14830 {
+			compatible = "fixed-clock";
+			#clock-cells = <0>;
+			clock-frequency = <3686400>;
+		};
+
+	};
+};
+
+&spi0 {
+	max14830: max14830@0 {
+		compatible = "maxim,max14830";
+		reg = <0>;
+		clocks = <&spi_uart_clk>;
+		clock-names = "osc";
+		interrupt-parent = <&gpio3>;
+		interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
+		gpio-controller;
+		#gpio-cells = <2>;
+	};
+};