Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 56 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt
new file mode 100644
index 000000000..cce3cd71e
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/fsl/cpm_qe/gpio.txt
@@ -0,0 +1,56 @@
+Every GPIO controller node must have #gpio-cells property defined,
+this information will be used to translate gpio-specifiers.
+
+On CPM1 devices, all ports are using slightly different register layouts.
+Ports A, C and D are 16bit ports and Ports B and E are 32bit ports.
+
+On CPM2 devices, all ports are 32bit ports and use a common register layout.
+
+Required properties:
+- compatible : "fsl,cpm1-pario-bank-a", "fsl,cpm1-pario-bank-b",
+  "fsl,cpm1-pario-bank-c", "fsl,cpm1-pario-bank-d",
+  "fsl,cpm1-pario-bank-e", "fsl,cpm2-pario-bank"
+- #gpio-cells : Should be two. The first cell is the pin number and the
+  second cell is used to specify optional parameters (currently unused).
+- gpio-controller : Marks the port as GPIO controller.
+Optional properties:
+- fsl,cpm1-gpio-irq-mask : For banks having interrupt capability (like port C
+  on CPM1), this item tells which ports have an associated interrupt (ports are
+  listed in the same order as in PCINT register)
+- interrupts : This property provides the list of interrupt for each GPIO having
+  one as described by the fsl,cpm1-gpio-irq-mask property. There should be as
+  many interrupts as number of ones in the mask property. The first interrupt in
+  the list corresponds to the most significant bit of the mask.
+
+Example of four SOC GPIO banks defined as gpio-controller nodes:
+
+	CPM1_PIO_A: gpio-controller@950 {
+		#gpio-cells = <2>;
+		compatible = "fsl,cpm1-pario-bank-a";
+		reg = <0x950 0x10>;
+		gpio-controller;
+	};
+
+	CPM1_PIO_B: gpio-controller@ab8 {
+		#gpio-cells = <2>;
+		compatible = "fsl,cpm1-pario-bank-b";
+		reg = <0xab8 0x10>;
+		gpio-controller;
+	};
+
+	CPM1_PIO_C: gpio-controller@960 {
+		#gpio-cells = <2>;
+		compatible = "fsl,cpm1-pario-bank-c";
+		reg = <0x960 0x10>;
+		fsl,cpm1-gpio-irq-mask = <0x0fff>;
+		interrupts = <1 2 6 9 10 11 14 15 23 24 26 31>;
+		interrupt-parent = <&CPM_PIC>;
+		gpio-controller;
+	};
+
+	CPM1_PIO_E: gpio-controller@ac8 {
+		#gpio-cells = <2>;
+		compatible = "fsl,cpm1-pario-bank-e";
+		reg = <0xac8 0x18>;
+		gpio-controller;
+	};