Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

2 files changed, 197 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/soc/rockchip/grf.txt b/Documentation/devicetree/bindings/soc/rockchip/grf.txt
new file mode 100644
index 000000000..f96511aa3
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/rockchip/grf.txt
@@ -0,0 +1,61 @@
+* Rockchip General Register Files (GRF)
+
+The general register file will be used to do static set by software, which
+is composed of many registers for system control.
+
+From RK3368 SoCs, the GRF is divided into two sections,
+- GRF, used for general non-secure system,
+- SGRF, used for general secure system,
+- PMUGRF, used for always on system
+
+On RK3328 SoCs, the GRF adds a section for USB2PHYGRF,
+
+ON RK3308 SoC, the GRF is divided into four sections:
+- GRF, used for general non-secure system,
+- SGRF, used for general secure system,
+- DETECTGRF, used for audio codec system,
+- COREGRF, used for pvtm,
+
+Required Properties:
+
+- compatible: GRF should be one of the following:
+   - "rockchip,px30-grf", "syscon": for px30
+   - "rockchip,rk3036-grf", "syscon": for rk3036
+   - "rockchip,rk3066-grf", "syscon": for rk3066
+   - "rockchip,rk3188-grf", "syscon": for rk3188
+   - "rockchip,rk3228-grf", "syscon": for rk3228
+   - "rockchip,rk3288-grf", "syscon": for rk3288
+   - "rockchip,rk3308-grf", "syscon": for rk3308
+   - "rockchip,rk3328-grf", "syscon": for rk3328
+   - "rockchip,rk3368-grf", "syscon": for rk3368
+   - "rockchip,rk3399-grf", "syscon": for rk3399
+   - "rockchip,rv1108-grf", "syscon": for rv1108
+- compatible: DETECTGRF should be one of the following:
+   - "rockchip,rk3308-detect-grf", "syscon": for rk3308
+- compatilbe: COREGRF should be one of the following:
+   - "rockchip,rk3308-core-grf", "syscon": for rk3308
+- compatible: PMUGRF should be one of the following:
+   - "rockchip,px30-pmugrf", "syscon": for px30
+   - "rockchip,rk3368-pmugrf", "syscon": for rk3368
+   - "rockchip,rk3399-pmugrf", "syscon": for rk3399
+- compatible: SGRF should be one of the following:
+   - "rockchip,rk3288-sgrf", "syscon": for rk3288
+- compatible: USB2PHYGRF should be one of the following:
+   - "rockchip,px30-usb2phy-grf", "syscon": for px30
+   - "rockchip,rk3328-usb2phy-grf", "syscon": for rk3328
+- compatible: USBGRF should be one of the following:
+   - "rockchip,rv1108-usbgrf", "syscon": for rv1108
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+Example: GRF and PMUGRF of RK3399 SoCs
+
+	pmugrf: syscon@ff320000 {
+		compatible = "rockchip,rk3399-pmugrf", "syscon";
+		reg = <0x0 0xff320000 0x0 0x1000>;
+	};
+
+	grf: syscon@ff770000 {
+		compatible = "rockchip,rk3399-grf", "syscon";
+		reg = <0x0 0xff770000 0x0 0x10000>;
+	};
diff --git a/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
new file mode 100644
index 000000000..8304eceb6
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/rockchip/power_domain.txt
@@ -0,0 +1,136 @@
+* Rockchip Power Domains
+
+Rockchip processors include support for multiple power domains which can be
+powered up/down by software based on different application scenes to save power.
+
+Required properties for power domain controller:
+- compatible: Should be one of the following.
+	"rockchip,px30-power-controller" - for PX30 SoCs.
+	"rockchip,rk3036-power-controller" - for RK3036 SoCs.
+	"rockchip,rk3066-power-controller" - for RK3066 SoCs.
+	"rockchip,rk3128-power-controller" - for RK3128 SoCs.
+	"rockchip,rk3188-power-controller" - for RK3188 SoCs.
+	"rockchip,rk3228-power-controller" - for RK3228 SoCs.
+	"rockchip,rk3288-power-controller" - for RK3288 SoCs.
+	"rockchip,rk3328-power-controller" - for RK3328 SoCs.
+	"rockchip,rk3366-power-controller" - for RK3366 SoCs.
+	"rockchip,rk3368-power-controller" - for RK3368 SoCs.
+	"rockchip,rk3399-power-controller" - for RK3399 SoCs.
+- #power-domain-cells: Number of cells in a power-domain specifier.
+	Should be 1 for multiple PM domains.
+- #address-cells: Should be 1.
+- #size-cells: Should be 0.
+
+Required properties for power domain sub nodes:
+- reg: index of the power domain, should use macros in:
+	"include/dt-bindings/power/px30-power.h" - for PX30 type power domain.
+	"include/dt-bindings/power/rk3036-power.h" - for RK3036 type power domain.
+	"include/dt-bindings/power/rk3066-power.h" - for RK3066 type power domain.
+	"include/dt-bindings/power/rk3128-power.h" - for RK3128 type power domain.
+	"include/dt-bindings/power/rk3188-power.h" - for RK3188 type power domain.
+	"include/dt-bindings/power/rk3228-power.h" - for RK3228 type power domain.
+	"include/dt-bindings/power/rk3288-power.h" - for RK3288 type power domain.
+	"include/dt-bindings/power/rk3328-power.h" - for RK3328 type power domain.
+	"include/dt-bindings/power/rk3366-power.h" - for RK3366 type power domain.
+	"include/dt-bindings/power/rk3368-power.h" - for RK3368 type power domain.
+	"include/dt-bindings/power/rk3399-power.h" - for RK3399 type power domain.
+- clocks (optional): phandles to clocks which need to be enabled while power domain
+	switches state.
+- pm_qos (optional): phandles to qos blocks which need to be saved and restored
+	while power domain switches state.
+
+Qos Example:
+
+	qos_gpu: qos_gpu@ffaf0000 {
+		compatible ="syscon";
+		reg = <0x0 0xffaf0000 0x0 0x20>;
+	};
+
+Example:
+
+	power: power-controller {
+		compatible = "rockchip,rk3288-power-controller";
+		#power-domain-cells = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pd_gpu {
+			reg = <RK3288_PD_GPU>;
+			clocks = <&cru ACLK_GPU>;
+			pm_qos = <&qos_gpu>;
+		};
+	};
+
+	 power: power-controller {
+                compatible = "rockchip,rk3368-power-controller";
+                #power-domain-cells = <1>;
+                #address-cells = <1>;
+                #size-cells = <0>;
+
+                pd_gpu_1 {
+                        reg = <RK3368_PD_GPU_1>;
+                        clocks = <&cru ACLK_GPU_CFG>;
+                };
+        };
+
+Example 2:
+		power: power-controller {
+			compatible = "rockchip,rk3399-power-controller";
+			#power-domain-cells = <1>;
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			pd_vio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				reg = <RK3399_PD_VIO>;
+
+				pd_vo {
+					#address-cells = <1>;
+					#size-cells = <0>;
+					reg = <RK3399_PD_VO>;
+
+					pd_vopb {
+						reg = <RK3399_PD_VOPB>;
+					};
+
+					pd_vopl {
+						reg = <RK3399_PD_VOPL>;
+					};
+				};
+			};
+		};
+
+Node of a device using power domains must have a power-domains property,
+containing a phandle to the power device node and an index specifying which
+power domain to use.
+The index should use macros in:
+	"include/dt-bindings/power/px30-power.h" - for px30 type power domain.
+	"include/dt-bindings/power/rk3036-power.h" - for rk3036 type power domain.
+	"include/dt-bindings/power/rk3128-power.h" - for rk3128 type power domain.
+	"include/dt-bindings/power/rk3128-power.h" - for rk3228 type power domain.
+	"include/dt-bindings/power/rk3288-power.h" - for rk3288 type power domain.
+	"include/dt-bindings/power/rk3328-power.h" - for rk3328 type power domain.
+	"include/dt-bindings/power/rk3366-power.h" - for rk3366 type power domain.
+	"include/dt-bindings/power/rk3368-power.h" - for rk3368 type power domain.
+	"include/dt-bindings/power/rk3399-power.h" - for rk3399 type power domain.
+
+Example of the node using power domain:
+
+	node {
+		/* ... */
+		power-domains = <&power RK3288_PD_GPU>;
+		/* ... */
+	};
+
+	node {
+                /* ... */
+                power-domains = <&power RK3368_PD_GPU_1>;
+                /* ... */
+        };
+
+	node {
+		/* ... */
+		power-domains = <&power RK3399_PD_VOPB>;
+		/* ... */
+	};