Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 115 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/sound/cirrus,madera.yaml b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml
new file mode 100644
index 000000000..23138ddcb
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cirrus,madera.yaml
@@ -0,0 +1,115 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sound/cirrus,madera.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cirrus Logic Madera class audio CODECs
+
+maintainers:
+  - patches@opensource.cirrus.com
+
+description: |
+  This describes audio configuration bindings for these codecs.
+
+  See also the core bindings for the parent MFD driver:
+
+    Documentation/devicetree/bindings/mfd/cirrus,madera.yaml
+
+  and defines for values used in these bindings:
+
+    include/dt-bindings/sound/madera.h
+
+  The properties are all contained in the parent MFD node.
+
+properties:
+  '#sound-dai-cells':
+    description:
+      The first cell indicating the audio interface.
+    const: 1
+
+  cirrus,inmode:
+    description:
+      A list of input mode settings for each input. A maximum
+      of 24 cells, with four cells per input in the order INnAL,
+      INnAR INnBL INnBR.  For non-muxed inputs the first two cells
+      for that input set the mode for the left and right channel
+      and the second two cells must be 0.  For muxed inputs the
+      first two cells for that input set the mode of the left and
+      right A inputs and the second two cells set the mode of the
+      left and right B inputs.  Valid mode values are one of the
+      MADERA_INMODE_xxx. If the array is shorter than the number
+      of inputs the unspecified inputs default to MADERA_INMODE_DIFF.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 24
+    items:
+      minimum: 0
+      maximum: 1
+      default: 0
+
+  cirrus,out-mono:
+    description:
+      Mono bit for each output, maximum of six cells if the array
+      is shorter outputs will be set to stereo.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 6
+    items:
+      minimum: 0
+      maximum: 1
+      default: 0
+
+  cirrus,dmic-ref:
+    description: |
+      Indicates how the MICBIAS pins have been externally connected
+      to DMICs on each input, one cell per input.
+
+        <IN1 IN2 IN3 ...>
+
+      A value of 0 indicates MICVDD and is the default,
+      other values depend on the codec: For CS47L35 one of the
+      CS47L35_DMIC_REF_xxx values For all other codecs one of
+      the MADERA_DMIC_REF_xxx values Also see the datasheet for a
+      description of the INn_DMIC_SUP field.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 6
+    items:
+      minimum: 0
+      maximum: 3
+      default: 0
+
+  cirrus,max-channels-clocked:
+    description:
+      Maximum number of channels that I2S clocks will be generated
+      for. Useful when clock master for systems where the I2S bus
+      has multiple data lines.  One cell for each AIF, use a value
+      of zero for AIFs that should be handled normally.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 1
+    maxItems: 4
+    items:
+      default: 0
+
+  cirrus,pdm-fmt:
+    description:
+      PDM speaker data format, must contain 2 cells (OUT5 and
+      OUT6). See the PDM_SPKn_FMT field in the datasheet for a
+      description of this value. The second cell is ignored for
+      codecs that do not have OUT6.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+
+  cirrus,pdm-mute:
+    description: |
+      PDM mute format, must contain 2 cells (OUT5 and OUT6). See the
+      PDM_SPKn_CTRL_1 register in the datasheet for a description
+      of this value.  The second cell is ignored for codecs that
+      do not have OUT6.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 2
+    maxItems: 2
+
+additionalProperties: true