Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 168 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
new file mode 100644
index 000000000..b104be131
--- /dev/null
+++ b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
@@ -0,0 +1,168 @@
+Qualcomm SoundWire Controller Bindings
+
+
+This binding describes the Qualcomm SoundWire Controller along with its
+board specific bus parameters.
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "qcom,soundwire-v<MAJOR>.<MINOR>.<STEP>",
+		    Example:
+			"qcom,soundwire-v1.3.0"
+			"qcom,soundwire-v1.5.0"
+			"qcom,soundwire-v1.5.1"
+			"qcom,soundwire-v1.6.0"
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the base address and size of SoundWire controller
+		    address space.
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify the SoundWire Controller IRQ
+
+- clock-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: should be "iface" for SoundWire Controller interface clock
+
+- clocks:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify the SoundWire Controller interface clock
+
+- #sound-dai-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 1 for digital audio interfaces on the controller.
+
+- qcom,dout-ports:
+	Usage: required
+	Value type: <u32>
+	Definition: must be count of data out ports
+
+- qcom,din-ports:
+	Usage: required
+	Value type: <u32>
+	Definition: must be count of data in ports
+
+- qcom,ports-offset1:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify payload transport window offset1 of each
+		    data port. Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-offset2:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify payload transport window offset2 of each
+		    data port. Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-sinterval-low:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should be sample interval low of each data port.
+		    Out ports followed by In ports. Used for Sample Interval
+		    calculation.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-word-length:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: should be size of payload channel sample.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-block-pack-mode:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: should be 0 or 1 to indicate the block packing mode.
+		    0 to indicate Blocks are per Channel
+		    1 to indicate Blocks are per Port.
+		    Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-block-group-count:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: should be in range 1 to 4 to indicate how many sample
+		    intervals are combined into a payload.
+		    Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-lane-control:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: should be in range 0 to 7 to identify which	data lane
+		    the data port uses.
+		    Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-hstart:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: should be number identifying lowerst numbered coloum in
+		    SoundWire Frame, i.e. left edge of the Transport sub-frame
+		    for each port. Values between 0 and 15 are valid.
+		    Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-hstop:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: should be number identifying highest numbered coloum in
+		    SoundWire Frame, i.e. the right edge of the Transport
+		    sub-frame for each port. Values between 0 and 15 are valid.
+		    Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,dports-type:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: should be one of the following types
+		    0 for reduced port
+		    1 for simple ports
+		    2 for full port
+		    Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+Note:
+	More Information on detail of encoding of these fields can be
+found in MIPI Alliance SoundWire 1.0 Specifications.
+
+= SoundWire devices
+Each subnode of the bus represents SoundWire device attached to it.
+The properties of these nodes are defined by the individual bindings.
+
+= EXAMPLE
+The following example represents a SoundWire controller on DB845c board
+which has controller integrated inside WCD934x codec on SDM845 SoC.
+
+soundwire: soundwire@c85 {
+	compatible = "qcom,soundwire-v1.3.0";
+	reg = <0xc85 0x20>;
+	interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+	clocks = <&wcc>;
+	clock-names = "iface";
+	#sound-dai-cells = <1>;
+	qcom,dports-type = <0>;
+	qcom,dout-ports	= <6>;
+	qcom,din-ports	= <2>;
+	qcom,ports-sinterval-low = /bits/ 8  <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>;
+	qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >;
+	qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>;
+
+	/* Left Speaker */
+	left{
+		....
+	};
+
+	/* Right Speaker */
+	right{
+		....
+	};
+};