Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

2 files changed, 254 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
new file mode 100644
index 000000000..b104be131
--- /dev/null
+++ b/Documentation/devicetree/bindings/soundwire/qcom,sdw.txt
@@ -0,0 +1,168 @@
+Qualcomm SoundWire Controller Bindings
+
+
+This binding describes the Qualcomm SoundWire Controller along with its
+board specific bus parameters.
+
+- compatible:
+	Usage: required
+	Value type: <stringlist>
+	Definition: must be "qcom,soundwire-v<MAJOR>.<MINOR>.<STEP>",
+		    Example:
+			"qcom,soundwire-v1.3.0"
+			"qcom,soundwire-v1.5.0"
+			"qcom,soundwire-v1.5.1"
+			"qcom,soundwire-v1.6.0"
+- reg:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: the base address and size of SoundWire controller
+		    address space.
+
+- interrupts:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify the SoundWire Controller IRQ
+
+- clock-names:
+	Usage: required
+	Value type: <stringlist>
+	Definition: should be "iface" for SoundWire Controller interface clock
+
+- clocks:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify the SoundWire Controller interface clock
+
+- #sound-dai-cells:
+	Usage: required
+	Value type: <u32>
+	Definition: must be 1 for digital audio interfaces on the controller.
+
+- qcom,dout-ports:
+	Usage: required
+	Value type: <u32>
+	Definition: must be count of data out ports
+
+- qcom,din-ports:
+	Usage: required
+	Value type: <u32>
+	Definition: must be count of data in ports
+
+- qcom,ports-offset1:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify payload transport window offset1 of each
+		    data port. Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-offset2:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should specify payload transport window offset2 of each
+		    data port. Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-sinterval-low:
+	Usage: required
+	Value type: <prop-encoded-array>
+	Definition: should be sample interval low of each data port.
+		    Out ports followed by In ports. Used for Sample Interval
+		    calculation.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-word-length:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: should be size of payload channel sample.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-block-pack-mode:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: should be 0 or 1 to indicate the block packing mode.
+		    0 to indicate Blocks are per Channel
+		    1 to indicate Blocks are per Port.
+		    Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-block-group-count:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: should be in range 1 to 4 to indicate how many sample
+		    intervals are combined into a payload.
+		    Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-lane-control:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: should be in range 0 to 7 to identify which	data lane
+		    the data port uses.
+		    Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-hstart:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: should be number identifying lowerst numbered coloum in
+		    SoundWire Frame, i.e. left edge of the Transport sub-frame
+		    for each port. Values between 0 and 15 are valid.
+		    Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,ports-hstop:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: should be number identifying highest numbered coloum in
+		    SoundWire Frame, i.e. the right edge of the Transport
+		    sub-frame for each port. Values between 0 and 15 are valid.
+		    Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+- qcom,dports-type:
+	Usage: optional
+	Value type: <prop-encoded-array>
+	Definition: should be one of the following types
+		    0 for reduced port
+		    1 for simple ports
+		    2 for full port
+		    Out ports followed by In ports.
+		    More info in MIPI Alliance SoundWire 1.0 Specifications.
+
+Note:
+	More Information on detail of encoding of these fields can be
+found in MIPI Alliance SoundWire 1.0 Specifications.
+
+= SoundWire devices
+Each subnode of the bus represents SoundWire device attached to it.
+The properties of these nodes are defined by the individual bindings.
+
+= EXAMPLE
+The following example represents a SoundWire controller on DB845c board
+which has controller integrated inside WCD934x codec on SDM845 SoC.
+
+soundwire: soundwire@c85 {
+	compatible = "qcom,soundwire-v1.3.0";
+	reg = <0xc85 0x20>;
+	interrupts = <20 IRQ_TYPE_EDGE_RISING>;
+	clocks = <&wcc>;
+	clock-names = "iface";
+	#sound-dai-cells = <1>;
+	qcom,dports-type = <0>;
+	qcom,dout-ports	= <6>;
+	qcom,din-ports	= <2>;
+	qcom,ports-sinterval-low = /bits/ 8  <0x07 0x1F 0x3F 0x7 0x1F 0x3F 0x0F 0x0F>;
+	qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x0C 0x6 0x12 0x0D 0x07 0x0A >;
+	qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x1F 0x00 0x00 0x1F 0x00 0x00>;
+
+	/* Left Speaker */
+	left{
+		....
+	};
+
+	/* Right Speaker */
+	right{
+		....
+	};
+};
diff --git a/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml b/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml
new file mode 100644
index 000000000..4aad121ef
--- /dev/null
+++ b/Documentation/devicetree/bindings/soundwire/soundwire-controller.yaml
@@ -0,0 +1,86 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soundwire/soundwire-controller.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: SoundWire Controller Generic Binding
+
+maintainers:
+  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
+  - Vinod Koul <vkoul@kernel.org>
+
+description: |
+  SoundWire busses can be described with a node for the SoundWire controller
+  device and a set of child nodes for each SoundWire slave on the bus.
+
+properties:
+  $nodename:
+    pattern: "^soundwire(@.*)?$"
+
+  "#address-cells":
+    const: 2
+
+  "#size-cells":
+    const: 0
+
+patternProperties:
+  "^.*@[0-9a-f],[0-9a-f]$":
+    type: object
+
+    properties:
+      compatible:
+        pattern: "^sdw[0-9a-f]{1}[0-9a-f]{4}[0-9a-f]{4}[0-9a-f]{2}$"
+        description: Is the textual representation of SoundWire Enumeration
+          address. compatible string should contain SoundWire Version ID,
+          Manufacturer ID, Part ID and Class ID in order and shall be in
+          lower-case hexadecimal with leading zeroes.
+          Valid sizes of these fields are
+          Version ID is 1 nibble, number '0x1' represents SoundWire 1.0
+          and '0x2' represents SoundWire 1.1 and so on.
+          MFD is 4 nibbles
+          PID is 4 nibbles
+          CID is 2 nibbles
+          More Information on detail of encoding of these fields can be
+          found in MIPI Alliance DisCo & SoundWire 1.0 Specifications.
+
+      reg:
+        maxItems: 1
+        description:
+          Link ID followed by Instance ID of SoundWire Device Address.
+
+    required:
+      - compatible
+      - reg
+
+required:
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: true
+
+examples:
+  - |
+    soundwire@c2d0000 {
+        #address-cells = <2>;
+        #size-cells = <0>;
+        reg = <0x0c2d0000 0x2000>;
+
+        speaker@0,1 {
+            compatible = "sdw10217201000";
+            reg = <0 1>;
+            powerdown-gpios = <&wcdpinctrl 2 0>;
+            #thermal-sensor-cells = <0>;
+            #sound-dai-cells = <0>;
+        };
+
+        speaker@0,2 {
+            compatible = "sdw10217201000";
+            reg = <0 2>;
+            powerdown-gpios = <&wcdpinctrl 2 0>;
+            #thermal-sensor-cells = <0>;
+            #sound-dai-cells = <0>;
+        };
+    };
+
+...