Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 114 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
new file mode 100644
index 000000000..f09e8723c
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qoriq-thermal.yaml
@@ -0,0 +1,114 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qoriq-thermal.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Thermal Monitoring Unit (TMU) on Freescale QorIQ SoCs
+
+maintainers:
+  - Anson Huang <Anson.Huang@nxp.com>
+
+properties:
+  compatible:
+    description: |
+      The version of the device is determined by the TMU IP Block Revision
+      Register (IPBRR0) at offset 0x0BF8.
+      Table of correspondences between IPBRR0 values and example chips:
+            Value           Device
+            ----------      -----
+            0x01900102      T1040
+    enum:
+      - fsl,qoriq-tmu
+      - fsl,imx8mq-tmu
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  fsl,tmu-range:
+    $ref: '/schemas/types.yaml#/definitions/uint32-array'
+    description: |
+      The values to be programmed into TTRnCR, as specified by the SoC
+      reference manual. The first cell is TTR0CR, the second is TTR1CR, etc.
+    maxItems: 4
+
+  fsl,tmu-calibration:
+    $ref: '/schemas/types.yaml#/definitions/uint32-matrix'
+    description: |
+      A list of cell pairs containing temperature calibration data, as
+      specified by the SoC reference manual. The first cell of each pair
+      is the value to be written to TTCFGR, and the second is the value
+      to be written to TSCFGR.
+    items:
+      items:
+        - description: value for TTCFGR
+        - description: value for TSCFGR
+    minItems: 1
+    maxItems: 64
+
+  little-endian:
+    description: |
+      boolean, if present, the TMU registers are little endian. If absent,
+      the default is big endian.
+    type: boolean
+
+  clocks:
+    maxItems: 1
+
+  "#thermal-sensor-cells":
+    const: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - fsl,tmu-range
+  - fsl,tmu-calibration
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    tmu@f0000 {
+        compatible = "fsl,qoriq-tmu";
+        reg = <0xf0000 0x1000>;
+        interrupts = <18 2 0 0>;
+        fsl,tmu-range = <0x000a0000 0x00090026 0x0008004a 0x0001006a>;
+        fsl,tmu-calibration = <0x00000000 0x00000025>,
+                              <0x00000001 0x00000028>,
+                              <0x00000002 0x0000002d>,
+                              <0x00000003 0x00000031>,
+                              <0x00000004 0x00000036>,
+                              <0x00000005 0x0000003a>,
+                              <0x00000006 0x00000040>,
+                              <0x00000007 0x00000044>,
+                              <0x00000008 0x0000004a>,
+                              <0x00000009 0x0000004f>,
+                              <0x0000000a 0x00000054>,
+                              <0x00010000 0x0000000d>,
+                              <0x00010001 0x00000013>,
+                              <0x00010002 0x00000019>,
+                              <0x00010003 0x0000001f>,
+                              <0x00010004 0x00000025>,
+                              <0x00010005 0x0000002d>,
+                              <0x00010006 0x00000033>,
+                              <0x00010007 0x00000043>,
+                              <0x00010008 0x0000004b>,
+                              <0x00010009 0x00000053>,
+                              <0x00020000 0x00000010>,
+                              <0x00020001 0x00000017>,
+                              <0x00020002 0x0000001f>,
+                              <0x00020003 0x00000029>,
+                              <0x00020004 0x00000031>,
+                              <0x00020005 0x0000003c>,
+                              <0x00020006 0x00000042>,
+                              <0x00020007 0x0000004d>,
+                              <0x00020008 0x00000056>,
+                              <0x00030000 0x00000012>,
+                              <0x00030001 0x0000001d>;
+        #thermal-sensor-cells = <1>;
+    };