Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 234 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
new file mode 100644
index 000000000..c0058332b
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml
@@ -0,0 +1,234 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/usb/amlogic,meson-g12a-usb-ctrl.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson G12A DWC3 USB SoC Controller Glue
+
+maintainers:
+  - Neil Armstrong <narmstrong@baylibre.com>
+
+description: |
+  The Amlogic G12A embeds a DWC3 USB IP Core configured for USB2 and USB3
+  in host-only mode, and a DWC2 IP Core configured for USB2 peripheral mode
+  only.
+
+  A glue connects the DWC3 core to USB2 PHYs and optionally to an USB3 PHY.
+
+  One of the USB2 PHYs can be re-routed in peripheral mode to a DWC2 USB IP.
+
+  The DWC3 Glue controls the PHY routing and power, an interrupt line is
+  connected to the Glue to serve as OTG ID change detection.
+
+  The Amlogic A1 embeds a DWC3 USB IP Core configured for USB2 in
+  host-only mode.
+
+  The Amlogic GXL, GXM & AXG SoCs doesn't embed an USB3 PHY.
+
+properties:
+  compatible:
+    enum:
+      - amlogic,meson-gxl-usb-ctrl
+      - amlogic,meson-gxm-usb-ctrl
+      - amlogic,meson-axg-usb-ctrl
+      - amlogic,meson-g12a-usb-ctrl
+      - amlogic,meson-a1-usb-ctrl
+
+  ranges: true
+
+  "#address-cells":
+    enum: [ 1, 2 ]
+
+  "#size-cells":
+    enum: [ 1, 2 ]
+
+  clocks:
+    minItems: 1
+    maxItems: 3
+
+  clock-names:
+    minItems: 1
+    maxItems: 3
+
+  resets:
+    minItems: 1
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  phy-names:
+    minItems: 1
+    maxItems: 3
+
+  phys:
+    minItems: 1
+    maxItems: 3
+
+  dr_mode: true
+
+  power-domains:
+    maxItems: 1
+
+  vbus-supply:
+    description: VBUS power supply when used in OTG switchable mode
+
+patternProperties:
+  "^usb@[0-9a-f]+$":
+    type: object
+
+additionalProperties: false
+
+required:
+  - compatible
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+  - clocks
+  - resets
+  - reg
+  - interrupts
+  - phy-names
+  - phys
+  - dr_mode
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-g12a-usb-ctrl
+
+    then:
+      properties:
+        phy-names:
+          items:
+            - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used
+            - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used
+            - const: usb3-phy0 # USB3 PHY if USB3_0 is used
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gxl-usb-ctrl
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          items:
+            - const: usb_ctrl
+            - const: ddr
+        phy-names:
+          items:
+            - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used
+            - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used
+      required:
+        - clock-names
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-gxm-usb-ctrl
+
+    then:
+      properties:
+        clocks:
+          minItems: 2
+        clock-names:
+          items:
+            - const: usb_ctrl
+            - const: ddr
+        phy-names:
+          items:
+            - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used
+            - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used
+            - const: usb2-phy2 # USB2 PHY2 if USBOTG_C port is used
+
+      required:
+        - clock-names
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-axg-usb-ctrl
+
+    then:
+      properties:
+        phy-names:
+          items:
+            - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used
+        clocks:
+          minItems: 2
+        clock-names:
+          items:
+            - const: usb_ctrl
+            - const: ddr
+      required:
+        - clock-names
+  - if:
+      properties:
+        compatible:
+          enum:
+            - amlogic,meson-a1-usb-ctrl
+
+    then:
+      properties:
+        phy-names:
+          items:
+            - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used
+        clocks:
+          minItems: 3
+        clock-names:
+          items:
+            - const: usb_ctrl
+            - const: usb_bus
+            - const: xtal_usb_ctrl
+      required:
+        - clock-names
+
+examples:
+  - |
+    usb: usb@ffe09000 {
+          compatible = "amlogic,meson-g12a-usb-ctrl";
+          reg = <0xffe09000 0xa0>;
+          interrupts = <16>;
+          #address-cells = <1>;
+          #size-cells = <1>;
+          ranges;
+
+          clocks = <&clkc_usb>;
+          resets = <&reset_usb>;
+
+          dr_mode = "otg";
+
+          phys = <&usb2_phy0>, <&usb2_phy1>, <&usb3_phy0>;
+          phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0";
+
+          dwc2: usb@ff400000 {
+              compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
+              reg = <0xff400000 0x40000>;
+              interrupts = <31>;
+              clocks = <&clkc_usb1>;
+              clock-names = "otg";
+              phys = <&usb2_phy1>;
+              dr_mode = "peripheral";
+              g-rx-fifo-size = <192>;
+              g-np-tx-fifo-size = <128>;
+              g-tx-fifo-size = <128 128 16 16 16>;
+          };
+
+          dwc3: usb@ff500000 {
+              compatible = "snps,dwc3";
+              reg = <0xff500000 0x100000>;
+              interrupts = <30>;
+              dr_mode = "host";
+              snps,dis_u2_susphy_quirk;
+              snps,quirk-frame-length-adjustment;
+          };
+    };