Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 96 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/usb/cdns,usb3.yaml b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
new file mode 100644
index 000000000..703921e6b
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/cdns,usb3.yaml
@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/cdns,usb3.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cadence USBSS-DRD controller bindings
+
+maintainers:
+  - Pawel Laszczak <pawell@cadence.com>
+
+properties:
+  compatible:
+    const: cdns,usb3
+
+  reg:
+    items:
+      - description: OTG controller registers
+      - description: XHCI Host controller registers
+      - description: DEVICE controller registers
+
+  reg-names:
+    items:
+      - const: otg
+      - const: xhci
+      - const: dev
+
+  interrupts:
+    items:
+      - description: OTG/DRD controller interrupt
+      - description: XHCI host controller interrupt
+      - description: Device controller interrupt
+
+  interrupt-names:
+    items:
+      - const: host
+      - const: peripheral
+      - const: otg
+
+  dr_mode:
+    enum: [host, otg, peripheral]
+
+  maximum-speed:
+    enum: [super-speed, high-speed, full-speed]
+
+  phys:
+    minItems: 1
+    maxItems: 2
+
+  phy-names:
+    minItems: 1
+    maxItems: 2
+    items:
+      anyOf:
+        - const: cdns3,usb2-phy
+        - const: cdns3,usb3-phy
+
+  cdns,on-chip-buff-size:
+    description:
+      size of memory intended as internal memory for endpoints
+      buffers expressed in KB
+    $ref: /schemas/types.yaml#/definitions/uint16
+
+  cdns,phyrst-a-enable:
+    description: Enable resetting of PHY if Rx fail is detected
+    type: boolean
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        usb@6000000 {
+            compatible = "cdns,usb3";
+            reg = <0x00 0x6000000 0x00 0x10000>,
+                  <0x00 0x6010000 0x00 0x10000>,
+                  <0x00 0x6020000 0x00 0x10000>;
+            reg-names = "otg", "xhci", "dev";
+            interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>,
+                         <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "host", "peripheral", "otg";
+            maximum-speed = "super-speed";
+            dr_mode = "otg";
+        };
+    };