Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 115 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/usb/exynos-usb.txt b/Documentation/devicetree/bindings/usb/exynos-usb.txt
new file mode 100644
index 000000000..6aae1544f
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/exynos-usb.txt
@@ -0,0 +1,115 @@
+Samsung Exynos SoC USB controller
+
+The USB devices interface with USB controllers on Exynos SOCs.
+The device node has following properties.
+
+EHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ehci" for USB 2.0
+   EHCI controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+   region.
+ - interrupts: interrupt number to the cpu.
+ - clocks: from common clock binding: handle to usb clock.
+ - clock-names: from common clock binding: Shall be "usbhost".
+ - phys: from the *Generic PHY* bindings; array specifying phy(s) used
+   by the root port.
+ - phy-names: from the *Generic PHY* bindings; array of the names for
+   each phy for the root ports, must be a subset of the following:
+   "host", "hsic0", "hsic1".
+
+Optional properties:
+ - samsung,vbus-gpio:  if present, specifies the GPIO that
+   needs to be pulled up for the bus to be powered.
+
+Example:
+
+	usb@12110000 {
+		compatible = "samsung,exynos4210-ehci";
+		reg = <0x12110000 0x100>;
+		interrupts = <0 71 0>;
+		samsung,vbus-gpio = <&gpx2 6 1 3 3>;
+
+		clocks = <&clock 285>;
+		clock-names = "usbhost";
+
+		phys = <&usb2phy 1>;
+		phy-names = "host";
+	};
+
+OHCI
+Required properties:
+ - compatible: should be "samsung,exynos4210-ohci" for USB 2.0
+   OHCI companion controller in host mode.
+ - reg: physical base address of the controller and length of memory mapped
+   region.
+ - interrupts: interrupt number to the cpu.
+ - clocks: from common clock binding: handle to usb clock.
+ - clock-names: from common clock binding: Shall be "usbhost".
+ - phys: from the *Generic PHY* bindings; array specifying phy(s) used
+   by the root port.
+ - phy-names: from the *Generic PHY* bindings; array of the names for
+   each phy for the root ports, must be a subset of the following:
+   "host", "hsic0", "hsic1".
+
+Example:
+	usb@12120000 {
+		compatible = "samsung,exynos4210-ohci";
+		reg = <0x12120000 0x100>;
+		interrupts = <0 71 0>;
+
+		clocks = <&clock 285>;
+		clock-names = "usbhost";
+
+		phys = <&usb2phy 1>;
+		phy-names = "host";
+	};
+
+DWC3
+Required properties:
+ - compatible: should be one of the following -
+	       "samsung,exynos5250-dwusb3": for USB 3.0 DWC3 controller on
+					    Exynos5250/5420.
+	       "samsung,exynos5433-dwusb3": for USB 3.0 DWC3 controller on
+					    Exynos5433.
+	       "samsung,exynos7-dwusb3": for USB 3.0 DWC3 controller on Exynos7.
+ - #address-cells, #size-cells : should be '1' if the device has sub-nodes
+				 with 'reg' property.
+ - ranges: allows valid 1:1 translation between child's address space and
+	   parent's address space
+ - clocks: Clock IDs array as required by the controller.
+ - clock-names: Names of clocks corresponding to IDs in the clock property.
+                Following clock names shall be provided for different
+                compatibles:
+                 - samsung,exynos5250-dwusb3: "usbdrd30",
+                 - samsung,exynos5433-dwusb3: "aclk", "susp_clk", "pipe_pclk",
+                                              "phyclk",
+                 - samsung,exynos7-dwusb3: "usbdrd30", "usbdrd30_susp_clk",
+                                           "usbdrd30_axius_clk"
+ - vdd10-supply: 1.0V powr supply
+ - vdd33-supply: 3.0V/3.3V power supply
+
+Sub-nodes:
+The dwc3 core should be added as subnode to Exynos dwc3 glue.
+- dwc3 :
+   The binding details of dwc3 can be found in:
+   Documentation/devicetree/bindings/usb/dwc3.txt
+
+Example:
+	usb@12000000 {
+		compatible = "samsung,exynos5250-dwusb3";
+		clocks = <&clock 286>;
+		clock-names = "usbdrd30";
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges;
+		vdd10-supply = <&ldo11_reg>;
+		vdd33-supply = <&ldo9_reg>;
+
+		dwc3 {
+			compatible = "synopsys,dwc3";
+			reg = <0x12000000 0x10000>;
+			interrupts = <0 72 0>;
+			usb-phy = <&usb2_phy &usb3_phy>;
+		};
+	};