summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/usb/pxa-usb.txt
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-27 10:05:51 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-27 10:05:51 +0000
commit5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch)
treea94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/devicetree/bindings/usb/pxa-usb.txt
parentInitial commit. (diff)
downloadlinux-upstream/5.10.209.tar.xz
linux-upstream/5.10.209.zip
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/devicetree/bindings/usb/pxa-usb.txt')
-rw-r--r--Documentation/devicetree/bindings/usb/pxa-usb.txt53
1 files changed, 53 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/usb/pxa-usb.txt b/Documentation/devicetree/bindings/usb/pxa-usb.txt
new file mode 100644
index 000000000..9c331799b
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/pxa-usb.txt
@@ -0,0 +1,53 @@
+PXA USB controllers
+
+OHCI
+
+Required properties:
+ - compatible: Should be "marvell,pxa-ohci" for USB controllers
+ used in host mode.
+
+Optional properties:
+ - "marvell,enable-port1", "marvell,enable-port2", "marvell,enable-port3"
+ If present, enables the appropriate USB port of the controller.
+ - "marvell,port-mode" selects the mode of the ports:
+ 1 = PMM_NPS_MODE
+ 2 = PMM_GLOBAL_MODE
+ 3 = PMM_PERPORT_MODE
+ - "marvell,power-sense-low" - power sense pin is low-active.
+ - "marvell,power-control-low" - power control pin is low-active.
+ - "marvell,no-oc-protection" - disable over-current protection.
+ - "marvell,oc-mode-perport" - enable per-port over-current protection.
+ - "marvell,power_on_delay" Power On to Power Good time - in ms.
+
+Example:
+
+ usb0: ohci@4c000000 {
+ compatible = "marvell,pxa-ohci", "usb-ohci";
+ reg = <0x4c000000 0x100000>;
+ interrupts = <18>;
+ marvell,enable-port1;
+ marvell,port-mode = <2>; /* PMM_GLOBAL_MODE */
+ };
+
+UDC
+
+Required properties:
+ - compatible: Should be "marvell,pxa270-udc" for USB controllers
+ used in device mode.
+ - reg: usb device MMIO address space
+ - interrupts: single interrupt generated by the UDC IP
+ - clocks: input clock of the UDC IP (see clock-bindings.txt)
+
+Optional properties:
+ - gpios:
+ - gpio activated to control the USB D+ pullup (see gpio.txt)
+
+Example:
+
+ pxa27x_udc: udc@40600000 {
+ compatible = "marvell,pxa270-udc";
+ reg = <0x40600000 0x10000>;
+ interrupts = <11>;
+ clocks = <&pxa2xx_clks 11>;
+ gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
+ };