diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/driver-api/media/drivers/cx2341x-devel.rst | |
parent | Initial commit. (diff) | |
download | linux-upstream/5.10.209.tar.xz linux-upstream/5.10.209.zip |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | Documentation/driver-api/media/drivers/cx2341x-devel.rst | 3685 |
1 files changed, 3685 insertions, 0 deletions
diff --git a/Documentation/driver-api/media/drivers/cx2341x-devel.rst b/Documentation/driver-api/media/drivers/cx2341x-devel.rst new file mode 100644 index 000000000..97699df6e --- /dev/null +++ b/Documentation/driver-api/media/drivers/cx2341x-devel.rst @@ -0,0 +1,3685 @@ +.. SPDX-License-Identifier: GPL-2.0 + +The cx2341x driver +================== + +Memory at cx2341x chips +----------------------- + +This section describes the cx2341x memory map and documents some of the +register space. + +.. note:: the memory long words are little-endian ('intel format'). + +.. warning:: + + This information was figured out from searching through the memory + and registers, this information may not be correct and is certainly + not complete, and was not derived from anything more than searching + through the memory space with commands like: + + .. code-block:: none + + ivtvctl -O min=0x02000000,max=0x020000ff + + So take this as is, I'm always searching for more stuff, it's a large + register space :-). + +Memory Map +~~~~~~~~~~ + +The cx2341x exposes its entire 64M memory space to the PCI host via the PCI BAR0 +(Base Address Register 0). The addresses here are offsets relative to the +address held in BAR0. + +.. code-block:: none + + 0x00000000-0x00ffffff Encoder memory space + 0x00000000-0x0003ffff Encode.rom + ???-??? MPEG buffer(s) + ???-??? Raw video capture buffer(s) + ???-??? Raw audio capture buffer(s) + ???-??? Display buffers (6 or 9) + + 0x01000000-0x01ffffff Decoder memory space + 0x01000000-0x0103ffff Decode.rom + ???-??? MPEG buffers(s) + 0x0114b000-0x0115afff Audio.rom (deprecated?) + + 0x02000000-0x0200ffff Register Space + +Registers +~~~~~~~~~ + +The registers occupy the 64k space starting at the 0x02000000 offset from BAR0. +All of these registers are 32 bits wide. + +.. code-block:: none + + DMA Registers 0x000-0xff: + + 0x00 - Control: + 0=reset/cancel, 1=read, 2=write, 4=stop + 0x04 - DMA status: + 1=read busy, 2=write busy, 4=read error, 8=write error, 16=link list error + 0x08 - pci DMA pointer for read link list + 0x0c - pci DMA pointer for write link list + 0x10 - read/write DMA enable: + 1=read enable, 2=write enable + 0x14 - always 0xffffffff, if set any lower instability occurs, 0x00 crashes + 0x18 - ?? + 0x1c - always 0x20 or 32, smaller values slow down DMA transactions + 0x20 - always value of 0x780a010a + 0x24-0x3c - usually just random values??? + 0x40 - Interrupt status + 0x44 - Write a bit here and shows up in Interrupt status 0x40 + 0x48 - Interrupt Mask + 0x4C - always value of 0xfffdffff, + if changed to 0xffffffff DMA write interrupts break. + 0x50 - always 0xffffffff + 0x54 - always 0xffffffff (0x4c, 0x50, 0x54 seem like interrupt masks, are + 3 processors on chip, Java ones, VPU, SPU, APU, maybe these are the + interrupt masks???). + 0x60-0x7C - random values + 0x80 - first write linked list reg, for Encoder Memory addr + 0x84 - first write linked list reg, for pci memory addr + 0x88 - first write linked list reg, for length of buffer in memory addr + (|0x80000000 or this for last link) + 0x8c-0xdc - rest of write linked list reg, 8 sets of 3 total, DMA goes here + from linked list addr in reg 0x0c, firmware must push through or + something. + 0xe0 - first (and only) read linked list reg, for pci memory addr + 0xe4 - first (and only) read linked list reg, for Decoder memory addr + 0xe8 - first (and only) read linked list reg, for length of buffer + 0xec-0xff - Nothing seems to be in these registers, 0xec-f4 are 0x00000000. + +Memory locations for Encoder Buffers 0x700-0x7ff: + +These registers show offsets of memory locations pertaining to each +buffer area used for encoding, have to shift them by <<1 first. + +- 0x07F8: Encoder SDRAM refresh +- 0x07FC: Encoder SDRAM pre-charge + +Memory locations for Decoder Buffers 0x800-0x8ff: + +These registers show offsets of memory locations pertaining to each +buffer area used for decoding, have to shift them by <<1 first. + +- 0x08F8: Decoder SDRAM refresh +- 0x08FC: Decoder SDRAM pre-charge + +Other memory locations: + +- 0x2800: Video Display Module control +- 0x2D00: AO (audio output?) control +- 0x2D24: Bytes Flushed +- 0x7000: LSB I2C write clock bit (inverted) +- 0x7004: LSB I2C write data bit (inverted) +- 0x7008: LSB I2C read clock bit +- 0x700c: LSB I2C read data bit +- 0x9008: GPIO get input state +- 0x900c: GPIO set output state +- 0x9020: GPIO direction (Bit7 (GPIO 0..7) - 0:input, 1:output) +- 0x9050: SPU control +- 0x9054: Reset HW blocks +- 0x9058: VPU control +- 0xA018: Bit6: interrupt pending? +- 0xA064: APU command + + +Interrupt Status Register +~~~~~~~~~~~~~~~~~~~~~~~~~ + +The definition of the bits in the interrupt status register 0x0040, and the +interrupt mask 0x0048. If a bit is cleared in the mask, then we want our ISR to +execute. + +- bit 31 Encoder Start Capture +- bit 30 Encoder EOS +- bit 29 Encoder VBI capture +- bit 28 Encoder Video Input Module reset event +- bit 27 Encoder DMA complete +- bit 24 Decoder audio mode change detection event (through event notification) +- bit 22 Decoder data request +- bit 20 Decoder DMA complete +- bit 19 Decoder VBI re-insertion +- bit 18 Decoder DMA err (linked-list bad) + +Missing documentation +--------------------- + +- Encoder API post(?) +- Decoder API post(?) +- Decoder VTRACE event + + +The cx2341x firmware upload +--------------------------- + +This document describes how to upload the cx2341x firmware to the card. + +How to find +~~~~~~~~~~~ + +See the web pages of the various projects that uses this chip for information +on how to obtain the firmware. + +The firmware stored in a Windows driver can be detected as follows: + +- Each firmware image is 256k bytes. +- The 1st 32-bit word of the Encoder image is 0x0000da7 +- The 1st 32-bit word of the Decoder image is 0x00003a7 +- The 2nd 32-bit word of both images is 0xaa55bb66 + +How to load +~~~~~~~~~~~ + +- Issue the FWapi command to stop the encoder if it is running. Wait for the + command to complete. +- Issue the FWapi command to stop the decoder if it is running. Wait for the + command to complete. +- Issue the I2C command to the digitizer to stop emitting VSYNC events. +- Issue the FWapi command to halt the encoder's firmware. +- Sleep for 10ms. +- Issue the FWapi command to halt the decoder's firmware. +- Sleep for 10ms. +- Write 0x00000000 to register 0x2800 to stop the Video Display Module. +- Write 0x00000005 to register 0x2D00 to stop the AO (audio output?). +- Write 0x00000000 to register 0xA064 to ping? the APU. +- Write 0xFFFFFFFE to register 0x9058 to stop the VPU. +- Write 0xFFFFFFFF to register 0x9054 to reset the HW blocks. +- Write 0x00000001 to register 0x9050 to stop the SPU. +- Sleep for 10ms. +- Write 0x0000001A to register 0x07FC to init the Encoder SDRAM's pre-charge. +- Write 0x80000640 to register 0x07F8 to init the Encoder SDRAM's refresh to 1us. +- Write 0x0000001A to register 0x08FC to init the Decoder SDRAM's pre-charge. +- Write 0x80000640 to register 0x08F8 to init the Decoder SDRAM's refresh to 1us. +- Sleep for 512ms. (600ms is recommended) +- Transfer the encoder's firmware image to offset 0 in Encoder memory space. +- Transfer the decoder's firmware image to offset 0 in Decoder memory space. +- Use a read-modify-write operation to Clear bit 0 of register 0x9050 to + re-enable the SPU. +- Sleep for 1 second. +- Use a read-modify-write operation to Clear bits 3 and 0 of register 0x9058 + to re-enable the VPU. +- Sleep for 1 second. +- Issue status API commands to both firmware images to verify. + + +How to call the firmware API +---------------------------- + +The preferred calling convention is known as the firmware mailbox. The +mailboxes are basically a fixed length array that serves as the call-stack. + +Firmware mailboxes can be located by searching the encoder and decoder memory +for a 16 byte signature. That signature will be located on a 256-byte boundary. + +Signature: + +.. code-block:: none + + 0x78, 0x56, 0x34, 0x12, 0x12, 0x78, 0x56, 0x34, + 0x34, 0x12, 0x78, 0x56, 0x56, 0x34, 0x12, 0x78 + +The firmware implements 20 mailboxes of 20 32-bit words. The first 10 are +reserved for API calls. The second 10 are used by the firmware for event +notification. + + ====== ================= + Index Name + ====== ================= + 0 Flags + 1 Command + 2 Return value + 3 Timeout + 4-19 Parameter/Result + ====== ================= + + +The flags are defined in the following table. The direction is from the +perspective of the firmware. + + ==== ========== ============================================ + Bit Direction Purpose + ==== ========== ============================================ + 2 O Firmware has processed the command. + 1 I Driver has finished setting the parameters. + 0 I Driver is using this mailbox. + ==== ========== ============================================ + +The command is a 32-bit enumerator. The API specifics may be found in this +chapter. + +The return value is a 32-bit enumerator. Only two values are currently defined: + +- 0=success +- -1=command undefined. + +There are 16 parameters/results 32-bit fields. The driver populates these fields +with values for all the parameters required by the call. The driver overwrites +these fields with result values returned by the call. + +The timeout value protects the card from a hung driver thread. If the driver +doesn't handle the completed call within the timeout specified, the firmware +will reset that mailbox. + +To make an API call, the driver iterates over each mailbox looking for the +first one available (bit 0 has been cleared). The driver sets that bit, fills +in the command enumerator, the timeout value and any required parameters. The +driver then sets the parameter ready bit (bit 1). The firmware scans the +mailboxes for pending commands, processes them, sets the result code, populates +the result value array with that call's return values and sets the call +complete bit (bit 2). Once bit 2 is set, the driver should retrieve the results +and clear all the flags. If the driver does not perform this task within the +time set in the timeout register, the firmware will reset that mailbox. + +Event notifications are sent from the firmware to the host. The host tells the +firmware which events it is interested in via an API call. That call tells the +firmware which notification mailbox to use. The firmware signals the host via +an interrupt. Only the 16 Results fields are used, the Flags, Command, Return +value and Timeout words are not used. + + +OSD firmware API description +---------------------------- + +.. note:: this API is part of the decoder firmware, so it's cx23415 only. + + + +CX2341X_OSD_GET_FRAMEBUFFER +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 65/0x41 + +Description +^^^^^^^^^^^ + +Return base and length of contiguous OSD memory. + +Result[0] +^^^^^^^^^ + +OSD base address + +Result[1] +^^^^^^^^^ + +OSD length + + + +CX2341X_OSD_GET_PIXEL_FORMAT +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 66/0x42 + +Description +^^^^^^^^^^^ + +Query OSD format + +Result[0] +^^^^^^^^^ + +0=8bit index +1=16bit RGB 5:6:5 +2=16bit ARGB 1:5:5:5 +3=16bit ARGB 1:4:4:4 +4=32bit ARGB 8:8:8:8 + + + +CX2341X_OSD_SET_PIXEL_FORMAT +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 67/0x43 + +Description +^^^^^^^^^^^ + +Assign pixel format + +Param[0] +^^^^^^^^ + +- 0=8bit index +- 1=16bit RGB 5:6:5 +- 2=16bit ARGB 1:5:5:5 +- 3=16bit ARGB 1:4:4:4 +- 4=32bit ARGB 8:8:8:8 + + + +CX2341X_OSD_GET_STATE +~~~~~~~~~~~~~~~~~~~~~ + +Enum: 68/0x44 + +Description +^^^^^^^^^^^ + +Query OSD state + +Result[0] +^^^^^^^^^ + +- Bit 0 0=off, 1=on +- Bits 1:2 alpha control +- Bits 3:5 pixel format + + + +CX2341X_OSD_SET_STATE +~~~~~~~~~~~~~~~~~~~~~ + +Enum: 69/0x45 + +Description +^^^^^^^^^^^ + +OSD switch + +Param[0] +^^^^^^^^ + +0=off, 1=on + + + +CX2341X_OSD_GET_OSD_COORDS +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 70/0x46 + +Description +^^^^^^^^^^^ + +Retrieve coordinates of OSD area blended with video + +Result[0] +^^^^^^^^^ + +OSD buffer address + +Result[1] +^^^^^^^^^ + +Stride in pixels + +Result[2] +^^^^^^^^^ + +Lines in OSD buffer + +Result[3] +^^^^^^^^^ + +Horizontal offset in buffer + +Result[4] +^^^^^^^^^ + +Vertical offset in buffer + + + +CX2341X_OSD_SET_OSD_COORDS +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 71/0x47 + +Description +^^^^^^^^^^^ + +Assign the coordinates of the OSD area to blend with video + +Param[0] +^^^^^^^^ + +buffer address + +Param[1] +^^^^^^^^ + +buffer stride in pixels + +Param[2] +^^^^^^^^ + +lines in buffer + +Param[3] +^^^^^^^^ + +horizontal offset + +Param[4] +^^^^^^^^ + +vertical offset + + + +CX2341X_OSD_GET_SCREEN_COORDS +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 72/0x48 + +Description +^^^^^^^^^^^ + +Retrieve OSD screen area coordinates + +Result[0] +^^^^^^^^^ + +top left horizontal offset + +Result[1] +^^^^^^^^^ + +top left vertical offset + +Result[2] +^^^^^^^^^ + +bottom right horizontal offset + +Result[3] +^^^^^^^^^ + +bottom right vertical offset + + + +CX2341X_OSD_SET_SCREEN_COORDS +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 73/0x49 + +Description +^^^^^^^^^^^ + +Assign the coordinates of the screen area to blend with video + +Param[0] +^^^^^^^^ + +top left horizontal offset + +Param[1] +^^^^^^^^ + +top left vertical offset + +Param[2] +^^^^^^^^ + +bottom left horizontal offset + +Param[3] +^^^^^^^^ + +bottom left vertical offset + + + +CX2341X_OSD_GET_GLOBAL_ALPHA +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 74/0x4A + +Description +^^^^^^^^^^^ + +Retrieve OSD global alpha + +Result[0] +^^^^^^^^^ + +global alpha: 0=off, 1=on + +Result[1] +^^^^^^^^^ + +bits 0:7 global alpha + + + +CX2341X_OSD_SET_GLOBAL_ALPHA +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 75/0x4B + +Description +^^^^^^^^^^^ + +Update global alpha + +Param[0] +^^^^^^^^ + +global alpha: 0=off, 1=on + +Param[1] +^^^^^^^^ + +global alpha (8 bits) + +Param[2] +^^^^^^^^ + +local alpha: 0=on, 1=off + + + +CX2341X_OSD_SET_BLEND_COORDS +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 78/0x4C + +Description +^^^^^^^^^^^ + +Move start of blending area within display buffer + +Param[0] +^^^^^^^^ + +horizontal offset in buffer + +Param[1] +^^^^^^^^ + +vertical offset in buffer + + + +CX2341X_OSD_GET_FLICKER_STATE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 79/0x4F + +Description +^^^^^^^^^^^ + +Retrieve flicker reduction module state + +Result[0] +^^^^^^^^^ + +flicker state: 0=off, 1=on + + + +CX2341X_OSD_SET_FLICKER_STATE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 80/0x50 + +Description +^^^^^^^^^^^ + +Set flicker reduction module state + +Param[0] +^^^^^^^^ + +State: 0=off, 1=on + + + +CX2341X_OSD_BLT_COPY +~~~~~~~~~~~~~~~~~~~~ + +Enum: 82/0x52 + +Description +^^^^^^^^^^^ + +BLT copy + +Param[0] +^^^^^^^^ + +.. code-block:: none + + '0000' zero + '0001' ~destination AND ~source + '0010' ~destination AND source + '0011' ~destination + '0100' destination AND ~source + '0101' ~source + '0110' destination XOR source + '0111' ~destination OR ~source + '1000' ~destination AND ~source + '1001' destination XNOR source + '1010' source + '1011' ~destination OR source + '1100' destination + '1101' destination OR ~source + '1110' destination OR source + '1111' one + + +Param[1] +^^^^^^^^ + +Resulting alpha blending + +- '01' source_alpha +- '10' destination_alpha +- '11' source_alpha*destination_alpha+1 + (zero if both source and destination alpha are zero) + +Param[2] +^^^^^^^^ + +.. code-block:: none + + '00' output_pixel = source_pixel + + '01' if source_alpha=0: + output_pixel = destination_pixel + if 256 > source_alpha > 1: + output_pixel = ((source_alpha + 1)*source_pixel + + (255 - source_alpha)*destination_pixel)/256 + + '10' if destination_alpha=0: + output_pixel = source_pixel + if 255 > destination_alpha > 0: + output_pixel = ((255 - destination_alpha)*source_pixel + + (destination_alpha + 1)*destination_pixel)/256 + + '11' if source_alpha=0: + source_temp = 0 + if source_alpha=255: + source_temp = source_pixel*256 + if 255 > source_alpha > 0: + source_temp = source_pixel*(source_alpha + 1) + if destination_alpha=0: + destination_temp = 0 + if destination_alpha=255: + destination_temp = destination_pixel*256 + if 255 > destination_alpha > 0: + destination_temp = destination_pixel*(destination_alpha + 1) + output_pixel = (source_temp + destination_temp)/256 + +Param[3] +^^^^^^^^ + +width + +Param[4] +^^^^^^^^ + +height + +Param[5] +^^^^^^^^ + +destination pixel mask + +Param[6] +^^^^^^^^ + +destination rectangle start address + +Param[7] +^^^^^^^^ + +destination stride in dwords + +Param[8] +^^^^^^^^ + +source stride in dwords + +Param[9] +^^^^^^^^ + +source rectangle start address + + + +CX2341X_OSD_BLT_FILL +~~~~~~~~~~~~~~~~~~~~ + +Enum: 83/0x53 + +Description +^^^^^^^^^^^ + +BLT fill color + +Param[0] +^^^^^^^^ + +Same as Param[0] on API 0x52 + +Param[1] +^^^^^^^^ + +Same as Param[1] on API 0x52 + +Param[2] +^^^^^^^^ + +Same as Param[2] on API 0x52 + +Param[3] +^^^^^^^^ + +width + +Param[4] +^^^^^^^^ + +height + +Param[5] +^^^^^^^^ + +destination pixel mask + +Param[6] +^^^^^^^^ + +destination rectangle start address + +Param[7] +^^^^^^^^ + +destination stride in dwords + +Param[8] +^^^^^^^^ + +color fill value + + + +CX2341X_OSD_BLT_TEXT +~~~~~~~~~~~~~~~~~~~~ + +Enum: 84/0x54 + +Description +^^^^^^^^^^^ + +BLT for 8 bit alpha text source + +Param[0] +^^^^^^^^ + +Same as Param[0] on API 0x52 + +Param[1] +^^^^^^^^ + +Same as Param[1] on API 0x52 + +Param[2] +^^^^^^^^ + +Same as Param[2] on API 0x52 + +Param[3] +^^^^^^^^ + +width + +Param[4] +^^^^^^^^ + +height + +Param[5] +^^^^^^^^ + +destination pixel mask + +Param[6] +^^^^^^^^ + +destination rectangle start address + +Param[7] +^^^^^^^^ + +destination stride in dwords + +Param[8] +^^^^^^^^ + +source stride in dwords + +Param[9] +^^^^^^^^ + +source rectangle start address + +Param[10] +^^^^^^^^^ + +color fill value + + + +CX2341X_OSD_SET_FRAMEBUFFER_WINDOW +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 86/0x56 + +Description +^^^^^^^^^^^ + +Positions the main output window on the screen. The coordinates must be +such that the entire window fits on the screen. + +Param[0] +^^^^^^^^ + +window width + +Param[1] +^^^^^^^^ + +window height + +Param[2] +^^^^^^^^ + +top left window corner horizontal offset + +Param[3] +^^^^^^^^ + +top left window corner vertical offset + + + +CX2341X_OSD_SET_CHROMA_KEY +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 96/0x60 + +Description +^^^^^^^^^^^ + +Chroma key switch and color + +Param[0] +^^^^^^^^ + +state: 0=off, 1=on + +Param[1] +^^^^^^^^ + +color + + + +CX2341X_OSD_GET_ALPHA_CONTENT_INDEX +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 97/0x61 + +Description +^^^^^^^^^^^ + +Retrieve alpha content index + +Result[0] +^^^^^^^^^ + +alpha content index, Range 0:15 + + + +CX2341X_OSD_SET_ALPHA_CONTENT_INDEX +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 98/0x62 + +Description +^^^^^^^^^^^ + +Assign alpha content index + +Param[0] +^^^^^^^^ + +alpha content index, range 0:15 + + +Encoder firmware API description +-------------------------------- + +CX2341X_ENC_PING_FW +~~~~~~~~~~~~~~~~~~~ + +Enum: 128/0x80 + +Description +^^^^^^^^^^^ + +Does nothing. Can be used to check if the firmware is responding. + + + +CX2341X_ENC_START_CAPTURE +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 129/0x81 + +Description +^^^^^^^^^^^ + +Commences the capture of video, audio and/or VBI data. All encoding +parameters must be initialized prior to this API call. Captures frames +continuously or until a predefined number of frames have been captured. + +Param[0] +^^^^^^^^ + +Capture stream type: + + - 0=MPEG + - 1=Raw + - 2=Raw passthrough + - 3=VBI + + +Param[1] +^^^^^^^^ + +Bitmask: + + - Bit 0 when set, captures YUV + - Bit 1 when set, captures PCM audio + - Bit 2 when set, captures VBI (same as param[0]=3) + - Bit 3 when set, the capture destination is the decoder + (same as param[0]=2) + - Bit 4 when set, the capture destination is the host + +.. note:: this parameter is only meaningful for RAW capture type. + + + +CX2341X_ENC_STOP_CAPTURE +~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 130/0x82 + +Description +^^^^^^^^^^^ + +Ends a capture in progress + +Param[0] +^^^^^^^^ + +- 0=stop at end of GOP (generates IRQ) +- 1=stop immediate (no IRQ) + +Param[1] +^^^^^^^^ + +Stream type to stop, see param[0] of API 0x81 + +Param[2] +^^^^^^^^ + +Subtype, see param[1] of API 0x81 + + + +CX2341X_ENC_SET_AUDIO_ID +~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 137/0x89 + +Description +^^^^^^^^^^^ + +Assigns the transport stream ID of the encoded audio stream + +Param[0] +^^^^^^^^ + +Audio Stream ID + + + +CX2341X_ENC_SET_VIDEO_ID +~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 139/0x8B + +Description +^^^^^^^^^^^ + +Set video transport stream ID + +Param[0] +^^^^^^^^ + +Video stream ID + + + +CX2341X_ENC_SET_PCR_ID +~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 141/0x8D + +Description +^^^^^^^^^^^ + +Assigns the transport stream ID for PCR packets + +Param[0] +^^^^^^^^ + +PCR Stream ID + + + +CX2341X_ENC_SET_FRAME_RATE +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 143/0x8F + +Description +^^^^^^^^^^^ + +Set video frames per second. Change occurs at start of new GOP. + +Param[0] +^^^^^^^^ + +- 0=30fps +- 1=25fps + + + +CX2341X_ENC_SET_FRAME_SIZE +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 145/0x91 + +Description +^^^^^^^^^^^ + +Select video stream encoding resolution. + +Param[0] +^^^^^^^^ + +Height in lines. Default 480 + +Param[1] +^^^^^^^^ + +Width in pixels. Default 720 + + + +CX2341X_ENC_SET_BIT_RATE +~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 149/0x95 + +Description +^^^^^^^^^^^ + +Assign average video stream bitrate. + +Param[0] +^^^^^^^^ + +0=variable bitrate, 1=constant bitrate + +Param[1] +^^^^^^^^ + +bitrate in bits per second + +Param[2] +^^^^^^^^ + +peak bitrate in bits per second, divided by 400 + +Param[3] +^^^^^^^^ + +Mux bitrate in bits per second, divided by 400. May be 0 (default). + +Param[4] +^^^^^^^^ + +Rate Control VBR Padding + +Param[5] +^^^^^^^^ + +VBV Buffer used by encoder + +.. note:: + + #) Param\[3\] and Param\[4\] seem to be always 0 + #) Param\[5\] doesn't seem to be used. + + + +CX2341X_ENC_SET_GOP_PROPERTIES +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 151/0x97 + +Description +^^^^^^^^^^^ + +Setup the GOP structure + +Param[0] +^^^^^^^^ + +GOP size (maximum is 34) + +Param[1] +^^^^^^^^ + +Number of B frames between the I and P frame, plus 1. +For example: IBBPBBPBBPBB --> GOP size: 12, number of B frames: 2+1 = 3 + +.. note:: + + GOP size must be a multiple of (B-frames + 1). + + + +CX2341X_ENC_SET_ASPECT_RATIO +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 153/0x99 + +Description +^^^^^^^^^^^ + +Sets the encoding aspect ratio. Changes in the aspect ratio take effect +at the start of the next GOP. + +Param[0] +^^^^^^^^ + +- '0000' forbidden +- '0001' 1:1 square +- '0010' 4:3 +- '0011' 16:9 +- '0100' 2.21:1 +- '0101' to '1111' reserved + + + +CX2341X_ENC_SET_DNR_FILTER_MODE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 155/0x9B + +Description +^^^^^^^^^^^ + +Assign Dynamic Noise Reduction operating mode + +Param[0] +^^^^^^^^ + +Bit0: Spatial filter, set=auto, clear=manual +Bit1: Temporal filter, set=auto, clear=manual + +Param[1] +^^^^^^^^ + +Median filter: + +- 0=Disabled +- 1=Horizontal +- 2=Vertical +- 3=Horiz/Vert +- 4=Diagonal + + + +CX2341X_ENC_SET_DNR_FILTER_PROPS +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 157/0x9D + +Description +^^^^^^^^^^^ + +These Dynamic Noise Reduction filter values are only meaningful when +the respective filter is set to "manual" (See API 0x9B) + +Param[0] +^^^^^^^^ + +Spatial filter: default 0, range 0:15 + +Param[1] +^^^^^^^^ + +Temporal filter: default 0, range 0:31 + + + +CX2341X_ENC_SET_CORING_LEVELS +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 159/0x9F + +Description +^^^^^^^^^^^ + +Assign Dynamic Noise Reduction median filter properties. + +Param[0] +^^^^^^^^ + +Threshold above which the luminance median filter is enabled. +Default: 0, range 0:255 + +Param[1] +^^^^^^^^ + +Threshold below which the luminance median filter is enabled. +Default: 255, range 0:255 + +Param[2] +^^^^^^^^ + +Threshold above which the chrominance median filter is enabled. +Default: 0, range 0:255 + +Param[3] +^^^^^^^^ + +Threshold below which the chrominance median filter is enabled. +Default: 255, range 0:255 + + + +CX2341X_ENC_SET_SPATIAL_FILTER_TYPE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 161/0xA1 + +Description +^^^^^^^^^^^ + +Assign spatial prefilter parameters + +Param[0] +^^^^^^^^ + +Luminance filter + +- 0=Off +- 1=1D Horizontal +- 2=1D Vertical +- 3=2D H/V Separable (default) +- 4=2D Symmetric non-separable + +Param[1] +^^^^^^^^ + +Chrominance filter + +- 0=Off +- 1=1D Horizontal (default) + + + +CX2341X_ENC_SET_VBI_LINE +~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 183/0xB7 + +Description +^^^^^^^^^^^ + +Selects VBI line number. + +Param[0] +^^^^^^^^ + +- Bits 0:4 line number +- Bit 31 0=top_field, 1=bottom_field +- Bits 0:31 all set specifies "all lines" + +Param[1] +^^^^^^^^ + +VBI line information features: 0=disabled, 1=enabled + +Param[2] +^^^^^^^^ + +Slicing: 0=None, 1=Closed Caption +Almost certainly not implemented. Set to 0. + +Param[3] +^^^^^^^^ + +Luminance samples in this line. +Almost certainly not implemented. Set to 0. + +Param[4] +^^^^^^^^ + +Chrominance samples in this line +Almost certainly not implemented. Set to 0. + + + +CX2341X_ENC_SET_STREAM_TYPE +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 185/0xB9 + +Description +^^^^^^^^^^^ + +Assign stream type + +.. note:: + + Transport stream is not working in recent firmwares. + And in older firmwares the timestamps in the TS seem to be + unreliable. + +Param[0] +^^^^^^^^ + +- 0=Program stream +- 1=Transport stream +- 2=MPEG1 stream +- 3=PES A/V stream +- 5=PES Video stream +- 7=PES Audio stream +- 10=DVD stream +- 11=VCD stream +- 12=SVCD stream +- 13=DVD_S1 stream +- 14=DVD_S2 stream + + + +CX2341X_ENC_SET_OUTPUT_PORT +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 187/0xBB + +Description +^^^^^^^^^^^ + +Assign stream output port. Normally 0 when the data is copied through +the PCI bus (DMA), and 1 when the data is streamed to another chip +(pvrusb and cx88-blackbird). + +Param[0] +^^^^^^^^ + +- 0=Memory (default) +- 1=Streaming +- 2=Serial + +Param[1] +^^^^^^^^ + +Unknown, but leaving this to 0 seems to work best. Indications are that +this might have to do with USB support, although passing anything but 0 +only breaks things. + + + +CX2341X_ENC_SET_AUDIO_PROPERTIES +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 189/0xBD + +Description +^^^^^^^^^^^ + +Set audio stream properties, may be called while encoding is in progress. + +.. note:: + + All bitfields are consistent with ISO11172 documentation except + bits 2:3 which ISO docs define as: + + - '11' Layer I + - '10' Layer II + - '01' Layer III + - '00' Undefined + + This discrepancy may indicate a possible error in the documentation. + Testing indicated that only Layer II is actually working, and that + the minimum bitrate should be 192 kbps. + +Param[0] +^^^^^^^^ + +Bitmask: + +.. code-block:: none + + 0:1 '00' 44.1Khz + '01' 48Khz + '10' 32Khz + '11' reserved + + 2:3 '01'=Layer I + '10'=Layer II + + 4:7 Bitrate: + Index | Layer I | Layer II + ------+-------------+------------ + '0000' | free format | free format + '0001' | 32 kbit/s | 32 kbit/s + '0010' | 64 kbit/s | 48 kbit/s + '0011' | 96 kbit/s | 56 kbit/s + '0100' | 128 kbit/s | 64 kbit/s + '0101' | 160 kbit/s | 80 kbit/s + '0110' | 192 kbit/s | 96 kbit/s + '0111' | 224 kbit/s | 112 kbit/s + '1000' | 256 kbit/s | 128 kbit/s + '1001' | 288 kbit/s | 160 kbit/s + '1010' | 320 kbit/s | 192 kbit/s + '1011' | 352 kbit/s | 224 kbit/s + '1100' | 384 kbit/s | 256 kbit/s + '1101' | 416 kbit/s | 320 kbit/s + '1110' | 448 kbit/s | 384 kbit/s + + .. note:: + + For Layer II, not all combinations of total bitrate + and mode are allowed. See ISO11172-3 3-Annex B, + Table 3-B.2 + + 8:9 '00'=Stereo + '01'=JointStereo + '10'=Dual + '11'=Mono + + .. note:: + + The cx23415 cannot decode Joint Stereo properly. + + 10:11 Mode Extension used in joint_stereo mode. + In Layer I and II they indicate which subbands are in + intensity_stereo. All other subbands are coded in stereo. + '00' subbands 4-31 in intensity_stereo, bound==4 + '01' subbands 8-31 in intensity_stereo, bound==8 + '10' subbands 12-31 in intensity_stereo, bound==12 + '11' subbands 16-31 in intensity_stereo, bound==16 + + 12:13 Emphasis: + '00' None + '01' 50/15uS + '10' reserved + '11' CCITT J.17 + + 14 CRC: + '0' off + '1' on + + 15 Copyright: + '0' off + '1' on + + 16 Generation: + '0' copy + '1' original + + + +CX2341X_ENC_HALT_FW +~~~~~~~~~~~~~~~~~~~ + +Enum: 195/0xC3 + +Description +^^^^^^^^^^^ + +The firmware is halted and no further API calls are serviced until the +firmware is uploaded again. + + + +CX2341X_ENC_GET_VERSION +~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 196/0xC4 + +Description +^^^^^^^^^^^ + +Returns the version of the encoder firmware. + +Result[0] +^^^^^^^^^ + +Version bitmask: +- Bits 0:15 build +- Bits 16:23 minor +- Bits 24:31 major + + + +CX2341X_ENC_SET_GOP_CLOSURE +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 197/0xC5 + +Description +^^^^^^^^^^^ + +Assigns the GOP open/close property. + +Param[0] +^^^^^^^^ + +- 0=Open +- 1=Closed + + + +CX2341X_ENC_GET_SEQ_END +~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 198/0xC6 + +Description +^^^^^^^^^^^ + +Obtains the sequence end code of the encoder's buffer. When a capture +is started a number of interrupts are still generated, the last of +which will have Result[0] set to 1 and Result[1] will contain the size +of the buffer. + +Result[0] +^^^^^^^^^ + +State of the transfer (1 if last buffer) + +Result[1] +^^^^^^^^^ + +If Result[0] is 1, this contains the size of the last buffer, undefined +otherwise. + + + +CX2341X_ENC_SET_PGM_INDEX_INFO +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 199/0xC7 + +Description +^^^^^^^^^^^ + +Sets the Program Index Information. +The information is stored as follows: + +.. code-block:: c + + struct info { + u32 length; // Length of this frame + u32 offset_low; // Offset in the file of the + u32 offset_high; // start of this frame + u32 mask1; // Bits 0-2 are the type mask: + // 1=I, 2=P, 4=B + // 0=End of Program Index, other fields + // are invalid. + u32 pts; // The PTS of the frame + u32 mask2; // Bit 0 is bit 32 of the pts. + }; + u32 table_ptr; + struct info index[400]; + +The table_ptr is the encoder memory address in the table were +*new* entries will be written. + +.. note:: This is a ringbuffer, so the table_ptr will wraparound. + +Param[0] +^^^^^^^^ + +Picture Mask: +- 0=No index capture +- 1=I frames +- 3=I,P frames +- 7=I,P,B frames + +(Seems to be ignored, it always indexes I, P and B frames) + +Param[1] +^^^^^^^^ + +Elements requested (up to 400) + +Result[0] +^^^^^^^^^ + +Offset in the encoder memory of the start of the table. + +Result[1] +^^^^^^^^^ + +Number of allocated elements up to a maximum of Param[1] + + + +CX2341X_ENC_SET_VBI_CONFIG +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 200/0xC8 + +Description +^^^^^^^^^^^ + +Configure VBI settings + +Param[0] +^^^^^^^^ + +Bitmap: + +.. code-block:: none + + 0 Mode '0' Sliced, '1' Raw + 1:3 Insertion: + '000' insert in extension & user data + '001' insert in private packets + '010' separate stream and user data + '111' separate stream and private data + 8:15 Stream ID (normally 0xBD) + +Param[1] +^^^^^^^^ + +Frames per interrupt (max 8). Only valid in raw mode. + +Param[2] +^^^^^^^^ + +Total raw VBI frames. Only valid in raw mode. + +Param[3] +^^^^^^^^ + +Start codes + +Param[4] +^^^^^^^^ + +Stop codes + +Param[5] +^^^^^^^^ + +Lines per frame + +Param[6] +^^^^^^^^ + +Byte per line + +Result[0] +^^^^^^^^^ + +Observed frames per interrupt in raw mode only. Rage 1 to Param[1] + +Result[1] +^^^^^^^^^ + +Observed number of frames in raw mode. Range 1 to Param[2] + +Result[2] +^^^^^^^^^ + +Memory offset to start or raw VBI data + + + +CX2341X_ENC_SET_DMA_BLOCK_SIZE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 201/0xC9 + +Description +^^^^^^^^^^^ + +Set DMA transfer block size + +Param[0] +^^^^^^^^ + +DMA transfer block size in bytes or frames. When unit is bytes, +supported block sizes are 2^7, 2^8 and 2^9 bytes. + +Param[1] +^^^^^^^^ + +Unit: 0=bytes, 1=frames + + + +CX2341X_ENC_GET_PREV_DMA_INFO_MB_10 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 202/0xCA + +Description +^^^^^^^^^^^ + +Returns information on the previous DMA transfer in conjunction with +bit 27 of the interrupt mask. Uses mailbox 10. + +Result[0] +^^^^^^^^^ + +Type of stream + +Result[1] +^^^^^^^^^ + +Address Offset + +Result[2] +^^^^^^^^^ + +Maximum size of transfer + + + +CX2341X_ENC_GET_PREV_DMA_INFO_MB_9 +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 203/0xCB + +Description +^^^^^^^^^^^ + +Returns information on the previous DMA transfer in conjunction with +bit 27 or 18 of the interrupt mask. Uses mailbox 9. + +Result[0] +^^^^^^^^^ + +Status bits: +- 0 read completed +- 1 write completed +- 2 DMA read error +- 3 DMA write error +- 4 Scatter-Gather array error + +Result[1] +^^^^^^^^^ + +DMA type + +Result[2] +^^^^^^^^^ + +Presentation Time Stamp bits 0..31 + +Result[3] +^^^^^^^^^ + +Presentation Time Stamp bit 32 + + + +CX2341X_ENC_SCHED_DMA_TO_HOST +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 204/0xCC + +Description +^^^^^^^^^^^ + +Setup DMA to host operation + +Param[0] +^^^^^^^^ + +Memory address of link list + +Param[1] +^^^^^^^^ + +Length of link list (wtf: what units ???) + +Param[2] +^^^^^^^^ + +DMA type (0=MPEG) + + + +CX2341X_ENC_INITIALIZE_INPUT +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 205/0xCD + +Description +^^^^^^^^^^^ + +Initializes the video input + + + +CX2341X_ENC_SET_FRAME_DROP_RATE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 208/0xD0 + +Description +^^^^^^^^^^^ + +For each frame captured, skip specified number of frames. + +Param[0] +^^^^^^^^ + +Number of frames to skip + + + +CX2341X_ENC_PAUSE_ENCODER +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 210/0xD2 + +Description +^^^^^^^^^^^ + +During a pause condition, all frames are dropped instead of being encoded. + +Param[0] +^^^^^^^^ + +- 0=Pause encoding +- 1=Continue encoding + + + +CX2341X_ENC_REFRESH_INPUT +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 211/0xD3 + +Description +^^^^^^^^^^^ + +Refreshes the video input + + + +CX2341X_ENC_SET_COPYRIGHT +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 212/0xD4 + +Description +^^^^^^^^^^^ + +Sets stream copyright property + +Param[0] +^^^^^^^^ + + +- 0=Stream is not copyrighted +- 1=Stream is copyrighted + + + +CX2341X_ENC_SET_EVENT_NOTIFICATION +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 213/0xD5 + +Description +^^^^^^^^^^^ + +Setup firmware to notify the host about a particular event. Host must +unmask the interrupt bit. + +Param[0] +^^^^^^^^ + +Event (0=refresh encoder input) + +Param[1] +^^^^^^^^ + +Notification 0=disabled 1=enabled + +Param[2] +^^^^^^^^ + +Interrupt bit + +Param[3] +^^^^^^^^ + +Mailbox slot, -1 if no mailbox required. + + + +CX2341X_ENC_SET_NUM_VSYNC_LINES +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 214/0xD6 + +Description +^^^^^^^^^^^ + +Depending on the analog video decoder used, this assigns the number +of lines for field 1 and 2. + +Param[0] +^^^^^^^^ + +Field 1 number of lines: +- 0x00EF for SAA7114 +- 0x00F0 for SAA7115 +- 0x0105 for Micronas + +Param[1] +^^^^^^^^ + +Field 2 number of lines: +- 0x00EF for SAA7114 +- 0x00F0 for SAA7115 +- 0x0106 for Micronas + + + +CX2341X_ENC_SET_PLACEHOLDER +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 215/0xD7 + +Description +^^^^^^^^^^^ + +Provides a mechanism of inserting custom user data in the MPEG stream. + +Param[0] +^^^^^^^^ + +- 0=extension & user data +- 1=private packet with stream ID 0xBD + +Param[1] +^^^^^^^^ + +Rate at which to insert data, in units of frames (for private packet) +or GOPs (for ext. & user data) + +Param[2] +^^^^^^^^ + +Number of data DWORDs (below) to insert + +Param[3] +^^^^^^^^ + +Custom data 0 + +Param[4] +^^^^^^^^ + +Custom data 1 + +Param[5] +^^^^^^^^ + +Custom data 2 + +Param[6] +^^^^^^^^ + +Custom data 3 + +Param[7] +^^^^^^^^ + +Custom data 4 + +Param[8] +^^^^^^^^ + +Custom data 5 + +Param[9] +^^^^^^^^ + +Custom data 6 + +Param[10] +^^^^^^^^^ + +Custom data 7 + +Param[11] +^^^^^^^^^ + +Custom data 8 + + + +CX2341X_ENC_MUTE_VIDEO +~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 217/0xD9 + +Description +^^^^^^^^^^^ + +Video muting + +Param[0] +^^^^^^^^ + +Bit usage: + +.. code-block:: none + + 0 '0'=video not muted + '1'=video muted, creates frames with the YUV color defined below + 1:7 Unused + 8:15 V chrominance information + 16:23 U chrominance information + 24:31 Y luminance information + + + +CX2341X_ENC_MUTE_AUDIO +~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 218/0xDA + +Description +^^^^^^^^^^^ + +Audio muting + +Param[0] +^^^^^^^^ + +- 0=audio not muted +- 1=audio muted (produces silent mpeg audio stream) + + + +CX2341X_ENC_SET_VERT_CROP_LINE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 219/0xDB + +Description +^^^^^^^^^^^ + +Something to do with 'Vertical Crop Line' + +Param[0] +^^^^^^^^ + +If saa7114 and raw VBI capture and 60 Hz, then set to 10001. +Else 0. + + + +CX2341X_ENC_MISC +~~~~~~~~~~~~~~~~ + +Enum: 220/0xDC + +Description +^^^^^^^^^^^ + +Miscellaneous actions. Not known for 100% what it does. It's really a +sort of ioctl call. The first parameter is a command number, the second +the value. + +Param[0] +^^^^^^^^ + +Command number: + +.. code-block:: none + + 1=set initial SCR value when starting encoding (works). + 2=set quality mode (apparently some test setting). + 3=setup advanced VIM protection handling. + Always 1 for the cx23416 and 0 for cx23415. + 4=generate DVD compatible PTS timestamps + 5=USB flush mode + 6=something to do with the quantization matrix + 7=set navigation pack insertion for DVD: adds 0xbf (private stream 2) + packets to the MPEG. The size of these packets is 2048 bytes (including + the header of 6 bytes: 0x000001bf + length). The payload is zeroed and + it is up to the application to fill them in. These packets are apparently + inserted every four frames. + 8=enable scene change detection (seems to be a failure) + 9=set history parameters of the video input module + 10=set input field order of VIM + 11=set quantization matrix + 12=reset audio interface after channel change or input switch (has no argument). + Needed for the cx2584x, not needed for the mspx4xx, but it doesn't seem to + do any harm calling it regardless. + 13=set audio volume delay + 14=set audio delay + + +Param[1] +^^^^^^^^ + +Command value. + +Decoder firmware API description +-------------------------------- + +.. note:: this API is part of the decoder firmware, so it's cx23415 only. + + + +CX2341X_DEC_PING_FW +~~~~~~~~~~~~~~~~~~~ + +Enum: 0/0x00 + +Description +^^^^^^^^^^^ + +This API call does nothing. It may be used to check if the firmware +is responding. + + + +CX2341X_DEC_START_PLAYBACK +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 1/0x01 + +Description +^^^^^^^^^^^ + +Begin or resume playback. + +Param[0] +^^^^^^^^ + +0 based frame number in GOP to begin playback from. + +Param[1] +^^^^^^^^ + +Specifies the number of muted audio frames to play before normal +audio resumes. (This is not implemented in the firmware, leave at 0) + + + +CX2341X_DEC_STOP_PLAYBACK +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 2/0x02 + +Description +^^^^^^^^^^^ + +Ends playback and clears all decoder buffers. If PTS is not zero, +playback stops at specified PTS. + +Param[0] +^^^^^^^^ + +Display 0=last frame, 1=black + +.. note:: + + this takes effect immediately, so if you want to wait for a PTS, + then use '0', otherwise the screen goes to black at once. + You can call this later (even if there is no playback) with a 1 value + to set the screen to black. + +Param[1] +^^^^^^^^ + +PTS low + +Param[2] +^^^^^^^^ + +PTS high + + + +CX2341X_DEC_SET_PLAYBACK_SPEED +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 3/0x03 + +Description +^^^^^^^^^^^ + +Playback stream at speed other than normal. There are two modes of +operation: + + - Smooth: host transfers entire stream and firmware drops unused + frames. + - Coarse: host drops frames based on indexing as required to achieve + desired speed. + +Param[0] +^^^^^^^^ + +.. code-block:: none + + Bitmap: + 0:7 0 normal + 1 fast only "1.5 times" + n nX fast, 1/nX slow + 30 Framedrop: + '0' during 1.5 times play, every other B frame is dropped + '1' during 1.5 times play, stream is unchanged (bitrate + must not exceed 8mbps) + 31 Speed: + '0' slow + '1' fast + +.. note:: + + n is limited to 2. Anything higher does not result in + faster playback. Instead the host should start dropping frames. + +Param[1] +^^^^^^^^ + +Direction: 0=forward, 1=reverse + +.. note:: + + to make reverse playback work you have to write full GOPs in + reverse order. + +Param[2] +^^^^^^^^ + +.. code-block:: none + + Picture mask: + 1=I frames + 3=I, P frames + 7=I, P, B frames + +Param[3] +^^^^^^^^ + +B frames per GOP (for reverse play only) + +.. note:: + + for reverse playback the Picture Mask should be set to I or I, P. + Adding B frames to the mask will result in corrupt video. This field + has to be set to the correct value in order to keep the timing correct. + +Param[4] +^^^^^^^^ + +Mute audio: 0=disable, 1=enable + +Param[5] +^^^^^^^^ + +Display 0=frame, 1=field + +Param[6] +^^^^^^^^ + +Specifies the number of muted audio frames to play before normal audio +resumes. (Not implemented in the firmware, leave at 0) + + + +CX2341X_DEC_STEP_VIDEO +~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 5/0x05 + +Description +^^^^^^^^^^^ + +Each call to this API steps the playback to the next unit defined below +in the current playback direction. + +Param[0] +^^^^^^^^ + +0=frame, 1=top field, 2=bottom field + + + +CX2341X_DEC_SET_DMA_BLOCK_SIZE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 8/0x08 + +Description +^^^^^^^^^^^ + +Set DMA transfer block size. Counterpart to API 0xC9 + +Param[0] +^^^^^^^^ + +DMA transfer block size in bytes. A different size may be specified +when issuing the DMA transfer command. + + + +CX2341X_DEC_GET_XFER_INFO +~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 9/0x09 + +Description +^^^^^^^^^^^ + +This API call may be used to detect an end of stream condition. + +Result[0] +^^^^^^^^^ + +Stream type + +Result[1] +^^^^^^^^^ + +Address offset + +Result[2] +^^^^^^^^^ + +Maximum bytes to transfer + +Result[3] +^^^^^^^^^ + +Buffer fullness + + + +CX2341X_DEC_GET_DMA_STATUS +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 10/0x0A + +Description +^^^^^^^^^^^ + +Status of the last DMA transfer + +Result[0] +^^^^^^^^^ + +Bit 1 set means transfer complete +Bit 2 set means DMA error +Bit 3 set means linked list error + +Result[1] +^^^^^^^^^ + +DMA type: 0=MPEG, 1=OSD, 2=YUV + + + +CX2341X_DEC_SCHED_DMA_FROM_HOST +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 11/0x0B + +Description +^^^^^^^^^^^ + +Setup DMA from host operation. Counterpart to API 0xCC + +Param[0] +^^^^^^^^ + +Memory address of link list + +Param[1] +^^^^^^^^ + +Total # of bytes to transfer + +Param[2] +^^^^^^^^ + +DMA type (0=MPEG, 1=OSD, 2=YUV) + + + +CX2341X_DEC_PAUSE_PLAYBACK +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 13/0x0D + +Description +^^^^^^^^^^^ + +Freeze playback immediately. In this mode, when internal buffers are +full, no more data will be accepted and data request IRQs will be +masked. + +Param[0] +^^^^^^^^ + +Display: 0=last frame, 1=black + + + +CX2341X_DEC_HALT_FW +~~~~~~~~~~~~~~~~~~~ + +Enum: 14/0x0E + +Description +^^^^^^^^^^^ + +The firmware is halted and no further API calls are serviced until +the firmware is uploaded again. + + + +CX2341X_DEC_SET_STANDARD +~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 16/0x10 + +Description +^^^^^^^^^^^ + +Selects display standard + +Param[0] +^^^^^^^^ + +0=NTSC, 1=PAL + + + +CX2341X_DEC_GET_VERSION +~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 17/0x11 + +Description +^^^^^^^^^^^ + +Returns decoder firmware version information + +Result[0] +^^^^^^^^^ + +Version bitmask: + - Bits 0:15 build + - Bits 16:23 minor + - Bits 24:31 major + + + +CX2341X_DEC_SET_STREAM_INPUT +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 20/0x14 + +Description +^^^^^^^^^^^ + +Select decoder stream input port + +Param[0] +^^^^^^^^ + +0=memory (default), 1=streaming + + + +CX2341X_DEC_GET_TIMING_INFO +~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 21/0x15 + +Description +^^^^^^^^^^^ + +Returns timing information from start of playback + +Result[0] +^^^^^^^^^ + +Frame count by decode order + +Result[1] +^^^^^^^^^ + +Video PTS bits 0:31 by display order + +Result[2] +^^^^^^^^^ + +Video PTS bit 32 by display order + +Result[3] +^^^^^^^^^ + +SCR bits 0:31 by display order + +Result[4] +^^^^^^^^^ + +SCR bit 32 by display order + + + +CX2341X_DEC_SET_AUDIO_MODE +~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 22/0x16 + +Description +^^^^^^^^^^^ + +Select audio mode + +Param[0] +^^^^^^^^ + +Dual mono mode action + 0=Stereo, 1=Left, 2=Right, 3=Mono, 4=Swap, -1=Unchanged + +Param[1] +^^^^^^^^ + +Stereo mode action: + 0=Stereo, 1=Left, 2=Right, 3=Mono, 4=Swap, -1=Unchanged + + + +CX2341X_DEC_SET_EVENT_NOTIFICATION +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 23/0x17 + +Description +^^^^^^^^^^^ + +Setup firmware to notify the host about a particular event. +Counterpart to API 0xD5 + +Param[0] +^^^^^^^^ + +Event: + - 0=Audio mode change between mono, (joint) stereo and dual channel. + - 3=Decoder started + - 4=Unknown: goes off 10-15 times per second while decoding. + - 5=Some sync event: goes off once per frame. + +Param[1] +^^^^^^^^ + +Notification 0=disabled, 1=enabled + +Param[2] +^^^^^^^^ + +Interrupt bit + +Param[3] +^^^^^^^^ + +Mailbox slot, -1 if no mailbox required. + + + +CX2341X_DEC_SET_DISPLAY_BUFFERS +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 24/0x18 + +Description +^^^^^^^^^^^ + +Number of display buffers. To decode all frames in reverse playback you +must use nine buffers. + +Param[0] +^^^^^^^^ + +0=six buffers, 1=nine buffers + + + +CX2341X_DEC_EXTRACT_VBI +~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 25/0x19 + +Description +^^^^^^^^^^^ + +Extracts VBI data + +Param[0] +^^^^^^^^ + +0=extract from extension & user data, 1=extract from private packets + +Result[0] +^^^^^^^^^ + +VBI table location + +Result[1] +^^^^^^^^^ + +VBI table size + + + +CX2341X_DEC_SET_DECODER_SOURCE +~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 26/0x1A + +Description +^^^^^^^^^^^ + +Selects decoder source. Ensure that the parameters passed to this +API match the encoder settings. + +Param[0] +^^^^^^^^ + +Mode: 0=MPEG from host, 1=YUV from encoder, 2=YUV from host + +Param[1] +^^^^^^^^ + +YUV picture width + +Param[2] +^^^^^^^^ + +YUV picture height + +Param[3] +^^^^^^^^ + +Bitmap: see Param[0] of API 0xBD + + + +CX2341X_DEC_SET_PREBUFFERING +~~~~~~~~~~~~~~~~~~~~~~~~~~~~ + +Enum: 30/0x1E + +Description +^^^^^^^^^^^ + +Decoder prebuffering, when enabled up to 128KB are buffered for +streams <8mpbs or 640KB for streams >8mbps + +Param[0] +^^^^^^^^ + +0=off, 1=on + +PVR350 Video decoder registers 0x02002800 -> 0x02002B00 +------------------------------------------------------- + +Author: Ian Armstrong <ian@iarmst.demon.co.uk> + +Version: v0.4 + +Date: 12 March 2007 + + +This list has been worked out through trial and error. There will be mistakes +and omissions. Some registers have no obvious effect so it's hard to say what +they do, while others interact with each other, or require a certain load +sequence. Horizontal filter setup is one example, with six registers working +in unison and requiring a certain load sequence to correctly configure. The +indexed colour palette is much easier to set at just two registers, but again +it requires a certain load sequence. + +Some registers are fussy about what they are set to. Load in a bad value & the +decoder will fail. A firmware reload will often recover, but sometimes a reset +is required. For registers containing size information, setting them to 0 is +generally a bad idea. For other control registers i.e. 2878, you'll only find +out what values are bad when it hangs. + +.. code-block:: none + + -------------------------------------------------------------------------------- + 2800 + bit 0 + Decoder enable + 0 = disable + 1 = enable + -------------------------------------------------------------------------------- + 2804 + bits 0:31 + Decoder horizontal Y alias register 1 + --------------- + 2808 + bits 0:31 + Decoder horizontal Y alias register 2 + --------------- + 280C + bits 0:31 + Decoder horizontal Y alias register 3 + --------------- + 2810 + bits 0:31 + Decoder horizontal Y alias register 4 + --------------- + 2814 + bits 0:31 + Decoder horizontal Y alias register 5 + --------------- + 2818 + bits 0:31 + Decoder horizontal Y alias trigger + + These six registers control the horizontal aliasing filter for the Y plane. + The first five registers must all be loaded before accessing the trigger + (2818), as this register actually clocks the data through for the first + five. + + To correctly program set the filter, this whole procedure must be done 16 + times. The actual register contents are copied from a lookup-table in the + firmware which contains 4 different filter settings. + + -------------------------------------------------------------------------------- + 281C + bits 0:31 + Decoder horizontal UV alias register 1 + --------------- + 2820 + bits 0:31 + Decoder horizontal UV alias register 2 + --------------- + 2824 + bits 0:31 + Decoder horizontal UV alias register 3 + --------------- + 2828 + bits 0:31 + Decoder horizontal UV alias register 4 + --------------- + 282C + bits 0:31 + Decoder horizontal UV alias register 5 + --------------- + 2830 + bits 0:31 + Decoder horizontal UV alias trigger + + These six registers control the horizontal aliasing for the UV plane. + Operation is the same as the Y filter, with 2830 being the trigger + register. + + -------------------------------------------------------------------------------- + 2834 + bits 0:15 + Decoder Y source width in pixels + + bits 16:31 + Decoder Y destination width in pixels + --------------- + 2838 + bits 0:15 + Decoder UV source width in pixels + + bits 16:31 + Decoder UV destination width in pixels + + NOTE: For both registers, the resulting image must be fully visible on + screen. If the image exceeds the right edge both the source and destination + size must be adjusted to reflect the visible portion. For the source width, + you must take into account the scaling when calculating the new value. + -------------------------------------------------------------------------------- + + 283C + bits 0:31 + Decoder Y horizontal scaling + Normally = Reg 2854 >> 2 + --------------- + 2840 + bits 0:31 + Decoder ?? unknown - horizontal scaling + Usually 0x00080514 + --------------- + 2844 + bits 0:31 + Decoder UV horizontal scaling + Normally = Reg 2854 >> 2 + --------------- + 2848 + bits 0:31 + Decoder ?? unknown - horizontal scaling + Usually 0x00100514 + --------------- + 284C + bits 0:31 + Decoder ?? unknown - Y plane + Usually 0x00200020 + --------------- + 2850 + bits 0:31 + Decoder ?? unknown - UV plane + Usually 0x00200020 + --------------- + 2854 + bits 0:31 + Decoder 'master' value for horizontal scaling + --------------- + 2858 + bits 0:31 + Decoder ?? unknown + Usually 0 + --------------- + 285C + bits 0:31 + Decoder ?? unknown + Normally = Reg 2854 >> 1 + --------------- + 2860 + bits 0:31 + Decoder ?? unknown + Usually 0 + --------------- + 2864 + bits 0:31 + Decoder ?? unknown + Normally = Reg 2854 >> 1 + --------------- + 2868 + bits 0:31 + Decoder ?? unknown + Usually 0 + + Most of these registers either control horizontal scaling, or appear linked + to it in some way. Register 2854 contains the 'master' value & the other + registers can be calculated from that one. You must also remember to + correctly set the divider in Reg 2874. + + To enlarge: + Reg 2854 = (source_width * 0x00200000) / destination_width + Reg 2874 = No divide + + To reduce from full size down to half size: + Reg 2854 = (source_width/2 * 0x00200000) / destination width + Reg 2874 = Divide by 2 + + To reduce from half size down to quarter size: + Reg 2854 = (source_width/4 * 0x00200000) / destination width + Reg 2874 = Divide by 4 + + The result is always rounded up. + + -------------------------------------------------------------------------------- + 286C + bits 0:15 + Decoder horizontal Y buffer offset + + bits 15:31 + Decoder horizontal UV buffer offset + + Offset into the video image buffer. If the offset is gradually incremented, + the on screen image will move left & wrap around higher up on the right. + + -------------------------------------------------------------------------------- + 2870 + bits 0:15 + Decoder horizontal Y output offset + + bits 16:31 + Decoder horizontal UV output offset + + Offsets the actual video output. Controls output alignment of the Y & UV + planes. The higher the value, the greater the shift to the left. Use + reg 2890 to move the image right. + + -------------------------------------------------------------------------------- + 2874 + bits 0:1 + Decoder horizontal Y output size divider + 00 = No divide + 01 = Divide by 2 + 10 = Divide by 3 + + bits 4:5 + Decoder horizontal UV output size divider + 00 = No divide + 01 = Divide by 2 + 10 = Divide by 3 + + bit 8 + Decoder ?? unknown + 0 = Normal + 1 = Affects video output levels + + bit 16 + Decoder ?? unknown + 0 = Normal + 1 = Disable horizontal filter + + -------------------------------------------------------------------------------- + 2878 + bit 0 + ?? unknown + + bit 1 + osd on/off + 0 = osd off + 1 = osd on + + bit 2 + Decoder + osd video timing + 0 = NTSC + 1 = PAL + + bits 3:4 + ?? unknown + + bit 5 + Decoder + osd + Swaps upper & lower fields + + -------------------------------------------------------------------------------- + 287C + bits 0:10 + Decoder & osd ?? unknown + Moves entire screen horizontally. Starts at 0x005 with the screen + shifted heavily to the right. Incrementing in steps of 0x004 will + gradually shift the screen to the left. + + bits 11:31 + ?? unknown + + Normally contents are 0x00101111 (NTSC) or 0x1010111d (PAL) + + -------------------------------------------------------------------------------- + 2880 -------- ?? unknown + 2884 -------- ?? unknown + -------------------------------------------------------------------------------- + 2888 + bit 0 + Decoder + osd ?? unknown + 0 = Normal + 1 = Misaligned fields (Correctable through 289C & 28A4) + + bit 4 + ?? unknown + + bit 8 + ?? unknown + + Warning: Bad values will require a firmware reload to recover. + Known to be bad are 0x000,0x011,0x100,0x111 + -------------------------------------------------------------------------------- + 288C + bits 0:15 + osd ?? unknown + Appears to affect the osd position stability. The higher the value the + more unstable it becomes. Decoder output remains stable. + + bits 16:31 + osd ?? unknown + Same as bits 0:15 + + -------------------------------------------------------------------------------- + 2890 + bits 0:11 + Decoder output horizontal offset. + + Horizontal offset moves the video image right. A small left shift is + possible, but it's better to use reg 2870 for that due to its greater + range. + + NOTE: Video corruption will occur if video window is shifted off the right + edge. To avoid this read the notes for 2834 & 2838. + -------------------------------------------------------------------------------- + 2894 + bits 0:23 + Decoder output video surround colour. + + Contains the colour (in yuv) used to fill the screen when the video is + running in a window. + -------------------------------------------------------------------------------- + 2898 + bits 0:23 + Decoder video window colour + Contains the colour (in yuv) used to fill the video window when the + video is turned off. + + bit 24 + Decoder video output + 0 = Video on + 1 = Video off + + bit 28 + Decoder plane order + 0 = Y,UV + 1 = UV,Y + + bit 29 + Decoder second plane byte order + 0 = Normal (UV) + 1 = Swapped (VU) + + In normal usage, the first plane is Y & the second plane is UV. Though the + order of the planes can be swapped, only the byte order of the second plane + can be swapped. This isn't much use for the Y plane, but can be useful for + the UV plane. + + -------------------------------------------------------------------------------- + 289C + bits 0:15 + Decoder vertical field offset 1 + + bits 16:31 + Decoder vertical field offset 2 + + Controls field output vertical alignment. The higher the number, the lower + the image on screen. Known starting values are 0x011E0017 (NTSC) & + 0x01500017 (PAL) + -------------------------------------------------------------------------------- + 28A0 + bits 0:15 + Decoder & osd width in pixels + + bits 16:31 + Decoder & osd height in pixels + + All output from the decoder & osd are disabled beyond this area. Decoder + output will simply go black outside of this region. If the osd tries to + exceed this area it will become corrupt. + -------------------------------------------------------------------------------- + 28A4 + bits 0:11 + osd left shift. + + Has a range of 0x770->0x7FF. With the exception of 0, any value outside of + this range corrupts the osd. + -------------------------------------------------------------------------------- + 28A8 + bits 0:15 + osd vertical field offset 1 + + bits 16:31 + osd vertical field offset 2 + + Controls field output vertical alignment. The higher the number, the lower + the image on screen. Known starting values are 0x011E0017 (NTSC) & + 0x01500017 (PAL) + -------------------------------------------------------------------------------- + 28AC -------- ?? unknown + | + V + 28BC -------- ?? unknown + -------------------------------------------------------------------------------- + 28C0 + bit 0 + Current output field + 0 = first field + 1 = second field + + bits 16:31 + Current scanline + The scanline counts from the top line of the first field + through to the last line of the second field. + -------------------------------------------------------------------------------- + 28C4 -------- ?? unknown + | + V + 28F8 -------- ?? unknown + -------------------------------------------------------------------------------- + 28FC + bit 0 + ?? unknown + 0 = Normal + 1 = Breaks decoder & osd output + -------------------------------------------------------------------------------- + 2900 + bits 0:31 + Decoder vertical Y alias register 1 + --------------- + 2904 + bits 0:31 + Decoder vertical Y alias register 2 + --------------- + 2908 + bits 0:31 + Decoder vertical Y alias trigger + + These three registers control the vertical aliasing filter for the Y plane. + Operation is similar to the horizontal Y filter (2804). The only real + difference is that there are only two registers to set before accessing + the trigger register (2908). As for the horizontal filter, the values are + taken from a lookup table in the firmware, and the procedure must be + repeated 16 times to fully program the filter. + -------------------------------------------------------------------------------- + 290C + bits 0:31 + Decoder vertical UV alias register 1 + --------------- + 2910 + bits 0:31 + Decoder vertical UV alias register 2 + --------------- + 2914 + bits 0:31 + Decoder vertical UV alias trigger + + These three registers control the vertical aliasing filter for the UV + plane. Operation is the same as the Y filter, with 2914 being the trigger. + -------------------------------------------------------------------------------- + 2918 + bits 0:15 + Decoder Y source height in pixels + + bits 16:31 + Decoder Y destination height in pixels + --------------- + 291C + bits 0:15 + Decoder UV source height in pixels divided by 2 + + bits 16:31 + Decoder UV destination height in pixels + + NOTE: For both registers, the resulting image must be fully visible on + screen. If the image exceeds the bottom edge both the source and + destination size must be adjusted to reflect the visible portion. For the + source height, you must take into account the scaling when calculating the + new value. + -------------------------------------------------------------------------------- + 2920 + bits 0:31 + Decoder Y vertical scaling + Normally = Reg 2930 >> 2 + --------------- + 2924 + bits 0:31 + Decoder Y vertical scaling + Normally = Reg 2920 + 0x514 + --------------- + 2928 + bits 0:31 + Decoder UV vertical scaling + When enlarging = Reg 2930 >> 2 + When reducing = Reg 2930 >> 3 + --------------- + 292C + bits 0:31 + Decoder UV vertical scaling + Normally = Reg 2928 + 0x514 + --------------- + 2930 + bits 0:31 + Decoder 'master' value for vertical scaling + --------------- + 2934 + bits 0:31 + Decoder ?? unknown - Y vertical scaling + --------------- + 2938 + bits 0:31 + Decoder Y vertical scaling + Normally = Reg 2930 + --------------- + 293C + bits 0:31 + Decoder ?? unknown - Y vertical scaling + --------------- + 2940 + bits 0:31 + Decoder UV vertical scaling + When enlarging = Reg 2930 >> 1 + When reducing = Reg 2930 + --------------- + 2944 + bits 0:31 + Decoder ?? unknown - UV vertical scaling + --------------- + 2948 + bits 0:31 + Decoder UV vertical scaling + Normally = Reg 2940 + --------------- + 294C + bits 0:31 + Decoder ?? unknown - UV vertical scaling + + Most of these registers either control vertical scaling, or appear linked + to it in some way. Register 2930 contains the 'master' value & all other + registers can be calculated from that one. You must also remember to + correctly set the divider in Reg 296C + + To enlarge: + Reg 2930 = (source_height * 0x00200000) / destination_height + Reg 296C = No divide + + To reduce from full size down to half size: + Reg 2930 = (source_height/2 * 0x00200000) / destination height + Reg 296C = Divide by 2 + + To reduce from half down to quarter. + Reg 2930 = (source_height/4 * 0x00200000) / destination height + Reg 296C = Divide by 4 + + -------------------------------------------------------------------------------- + 2950 + bits 0:15 + Decoder Y line index into display buffer, first field + + bits 16:31 + Decoder Y vertical line skip, first field + -------------------------------------------------------------------------------- + 2954 + bits 0:15 + Decoder Y line index into display buffer, second field + + bits 16:31 + Decoder Y vertical line skip, second field + -------------------------------------------------------------------------------- + 2958 + bits 0:15 + Decoder UV line index into display buffer, first field + + bits 16:31 + Decoder UV vertical line skip, first field + -------------------------------------------------------------------------------- + 295C + bits 0:15 + Decoder UV line index into display buffer, second field + + bits 16:31 + Decoder UV vertical line skip, second field + -------------------------------------------------------------------------------- + 2960 + bits 0:15 + Decoder destination height minus 1 + + bits 16:31 + Decoder destination height divided by 2 + -------------------------------------------------------------------------------- + 2964 + bits 0:15 + Decoder Y vertical offset, second field + + bits 16:31 + Decoder Y vertical offset, first field + + These two registers shift the Y plane up. The higher the number, the + greater the shift. + -------------------------------------------------------------------------------- + 2968 + bits 0:15 + Decoder UV vertical offset, second field + + bits 16:31 + Decoder UV vertical offset, first field + + These two registers shift the UV plane up. The higher the number, the + greater the shift. + -------------------------------------------------------------------------------- + 296C + bits 0:1 + Decoder vertical Y output size divider + 00 = No divide + 01 = Divide by 2 + 10 = Divide by 4 + + bits 8:9 + Decoder vertical UV output size divider + 00 = No divide + 01 = Divide by 2 + 10 = Divide by 4 + -------------------------------------------------------------------------------- + 2970 + bit 0 + Decoder ?? unknown + 0 = Normal + 1 = Affect video output levels + + bit 16 + Decoder ?? unknown + 0 = Normal + 1 = Disable vertical filter + + -------------------------------------------------------------------------------- + 2974 -------- ?? unknown + | + V + 29EF -------- ?? unknown + -------------------------------------------------------------------------------- + 2A00 + bits 0:2 + osd colour mode + 000 = 8 bit indexed + 001 = 16 bit (565) + 010 = 15 bit (555) + 011 = 12 bit (444) + 100 = 32 bit (8888) + + bits 4:5 + osd display bpp + 01 = 8 bit + 10 = 16 bit + 11 = 32 bit + + bit 8 + osd global alpha + 0 = Off + 1 = On + + bit 9 + osd local alpha + 0 = Off + 1 = On + + bit 10 + osd colour key + 0 = Off + 1 = On + + bit 11 + osd ?? unknown + Must be 1 + + bit 13 + osd colour space + 0 = ARGB + 1 = AYVU + + bits 16:31 + osd ?? unknown + Must be 0x001B (some kind of buffer pointer ?) + + When the bits-per-pixel is set to 8, the colour mode is ignored and + assumed to be 8 bit indexed. For 16 & 32 bits-per-pixel the colour depth + is honoured, and when using a colour depth that requires fewer bytes than + allocated the extra bytes are used as padding. So for a 32 bpp with 8 bit + index colour, there are 3 padding bytes per pixel. It's also possible to + select 16bpp with a 32 bit colour mode. This results in the pixel width + being doubled, but the color key will not work as expected in this mode. + + Colour key is as it suggests. You designate a colour which will become + completely transparent. When using 565, 555 or 444 colour modes, the + colour key is always 16 bits wide. The colour to key on is set in Reg 2A18. + + Local alpha works differently depending on the colour mode. For 32bpp & 8 + bit indexed, local alpha is a per-pixel 256 step transparency, with 0 being + transparent and 255 being solid. For the 16bpp modes 555 & 444, the unused + bit(s) act as a simple transparency switch, with 0 being solid & 1 being + fully transparent. There is no local alpha support for 16bit 565. + + Global alpha is a 256 step transparency that applies to the entire osd, + with 0 being transparent & 255 being solid. + + It's possible to combine colour key, local alpha & global alpha. + -------------------------------------------------------------------------------- + 2A04 + bits 0:15 + osd x coord for left edge + + bits 16:31 + osd y coord for top edge + --------------- + 2A08 + bits 0:15 + osd x coord for right edge + + bits 16:31 + osd y coord for bottom edge + + For both registers, (0,0) = top left corner of the display area. These + registers do not control the osd size, only where it's positioned & how + much is visible. The visible osd area cannot exceed the right edge of the + display, otherwise the osd will become corrupt. See reg 2A10 for + setting osd width. + -------------------------------------------------------------------------------- + 2A0C + bits 0:31 + osd buffer index + + An index into the osd buffer. Slowly incrementing this moves the osd left, + wrapping around onto the right edge + -------------------------------------------------------------------------------- + 2A10 + bits 0:11 + osd buffer 32 bit word width + + Contains the width of the osd measured in 32 bit words. This means that all + colour modes are restricted to a byte width which is divisible by 4. + -------------------------------------------------------------------------------- + 2A14 + bits 0:15 + osd height in pixels + + bits 16:32 + osd line index into buffer + osd will start displaying from this line. + -------------------------------------------------------------------------------- + 2A18 + bits 0:31 + osd colour key + + Contains the colour value which will be transparent. + -------------------------------------------------------------------------------- + 2A1C + bits 0:7 + osd global alpha + + Contains the global alpha value (equiv ivtvfbctl --alpha XX) + -------------------------------------------------------------------------------- + 2A20 -------- ?? unknown + | + V + 2A2C -------- ?? unknown + -------------------------------------------------------------------------------- + 2A30 + bits 0:7 + osd colour to change in indexed palette + --------------- + 2A34 + bits 0:31 + osd colour for indexed palette + + To set the new palette, first load the index of the colour to change into + 2A30, then load the new colour into 2A34. The full palette is 256 colours, + so the index range is 0x00-0xFF + -------------------------------------------------------------------------------- + 2A38 -------- ?? unknown + 2A3C -------- ?? unknown + -------------------------------------------------------------------------------- + 2A40 + bits 0:31 + osd ?? unknown + + Affects overall brightness, wrapping around to black + -------------------------------------------------------------------------------- + 2A44 + bits 0:31 + osd ?? unknown + + Green tint + -------------------------------------------------------------------------------- + 2A48 + bits 0:31 + osd ?? unknown + + Red tint + -------------------------------------------------------------------------------- + 2A4C + bits 0:31 + osd ?? unknown + + Affects overall brightness, wrapping around to black + -------------------------------------------------------------------------------- + 2A50 + bits 0:31 + osd ?? unknown + + Colour shift + -------------------------------------------------------------------------------- + 2A54 + bits 0:31 + osd ?? unknown + + Colour shift + -------------------------------------------------------------------------------- + 2A58 -------- ?? unknown + | + V + 2AFC -------- ?? unknown + -------------------------------------------------------------------------------- + 2B00 + bit 0 + osd filter control + 0 = filter off + 1 = filter on + + bits 1:4 + osd ?? unknown + + -------------------------------------------------------------------------------- + +The cx231xx DMA engine +---------------------- + + +This page describes the structures and procedures used by the cx2341x DMA +engine. + +Introduction +~~~~~~~~~~~~ + +The cx2341x PCI interface is busmaster capable. This means it has a DMA +engine to efficiently transfer large volumes of data between the card and main +memory without requiring help from a CPU. Like most hardware, it must operate +on contiguous physical memory. This is difficult to come by in large quantities +on virtual memory machines. + +Therefore, it also supports a technique called "scatter-gather". The card can +transfer multiple buffers in one operation. Instead of allocating one large +contiguous buffer, the driver can allocate several smaller buffers. + +In practice, I've seen the average transfer to be roughly 80K, but transfers +above 128K were not uncommon, particularly at startup. The 128K figure is +important, because that is the largest block that the kernel can normally +allocate. Even still, 128K blocks are hard to come by, so the driver writer is +urged to choose a smaller block size and learn the scatter-gather technique. + +Mailbox #10 is reserved for DMA transfer information. + +Note: the hardware expects little-endian data ('intel format'). + +Flow +~~~~ + +This section describes, in general, the order of events when handling DMA +transfers. Detailed information follows this section. + +- The card raises the Encoder interrupt. +- The driver reads the transfer type, offset and size from Mailbox #10. +- The driver constructs the scatter-gather array from enough free dma buffers + to cover the size. +- The driver schedules the DMA transfer via the ScheduleDMAtoHost API call. +- The card raises the DMA Complete interrupt. +- The driver checks the DMA status register for any errors. +- The driver post-processes the newly transferred buffers. + +NOTE! It is possible that the Encoder and DMA Complete interrupts get raised +simultaneously. (End of the last, start of the next, etc.) + +Mailbox #10 +~~~~~~~~~~~ + +The Flags, Command, Return Value and Timeout fields are ignored. + +- Name: Mailbox #10 +- Results[0]: Type: 0: MPEG. +- Results[1]: Offset: The position relative to the card's memory space. +- Results[2]: Size: The exact number of bytes to transfer. + +My speculation is that since the StartCapture API has a capture type of "RAW" +available, that the type field will have other values that correspond to YUV +and PCM data. + +Scatter-Gather Array +~~~~~~~~~~~~~~~~~~~~ + +The scatter-gather array is a contiguously allocated block of memory that +tells the card the source and destination of each data-block to transfer. +Card "addresses" are derived from the offset supplied by Mailbox #10. Host +addresses are the physical memory location of the target DMA buffer. + +Each S-G array element is a struct of three 32-bit words. The first word is +the source address, the second is the destination address. Both take up the +entire 32 bits. The lowest 18 bits of the third word is the transfer byte +count. The high-bit of the third word is the "last" flag. The last-flag tells +the card to raise the DMA_DONE interrupt. From hard personal experience, if +you forget to set this bit, the card will still "work" but the stream will +most likely get corrupted. + +The transfer count must be a multiple of 256. Therefore, the driver will need +to track how much data in the target buffer is valid and deal with it +accordingly. + +Array Element: + +- 32-bit Source Address +- 32-bit Destination Address +- 14-bit reserved (high bit is the last flag) +- 18-bit byte count + +DMA Transfer Status +~~~~~~~~~~~~~~~~~~~ + +Register 0x0004 holds the DMA Transfer Status: + +- bit 0: read completed +- bit 1: write completed +- bit 2: DMA read error +- bit 3: DMA write error +- bit 4: Scatter-Gather array error |