Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

3 files changed, 261 insertions, 0 deletions

diff --git a/Documentation/driver-api/memory-devices/index.rst b/Documentation/driver-api/memory-devices/index.rst
new file mode 100644
index 000000000..28101458c
--- /dev/null
+++ b/Documentation/driver-api/memory-devices/index.rst
@@ -0,0 +1,18 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+=========================
+Memory Controller drivers
+=========================
+
+.. toctree::
+    :maxdepth: 1
+
+    ti-emif
+    ti-gpmc
+
+.. only::  subproject and html
+
+   Indices
+   =======
+
+   * :ref:`genindex`
diff --git a/Documentation/driver-api/memory-devices/ti-emif.rst b/Documentation/driver-api/memory-devices/ti-emif.rst
new file mode 100644
index 000000000..dea2ad9bc
--- /dev/null
+++ b/Documentation/driver-api/memory-devices/ti-emif.rst
@@ -0,0 +1,64 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+===============================
+TI EMIF SDRAM Controller Driver
+===============================
+
+Author
+======
+Aneesh V <aneesh@ti.com>
+
+Location
+========
+driver/memory/emif.c
+
+Supported SoCs:
+===============
+TI OMAP44xx
+TI OMAP54xx
+
+Menuconfig option:
+==================
+Device Drivers
+	Memory devices
+		Texas Instruments EMIF driver
+
+Description
+===========
+This driver is for the EMIF module available in Texas Instruments
+SoCs. EMIF is an SDRAM controller that, based on its revision,
+supports one or more of DDR2, DDR3, and LPDDR2 SDRAM protocols.
+This driver takes care of only LPDDR2 memories presently. The
+functions of the driver includes re-configuring AC timing
+parameters and other settings during frequency, voltage and
+temperature changes
+
+Platform Data (see include/linux/platform_data/emif_plat.h)
+===========================================================
+DDR device details and other board dependent and SoC dependent
+information can be passed through platform data (struct emif_platform_data)
+
+- DDR device details: 'struct ddr_device_info'
+- Device AC timings: 'struct lpddr2_timings' and 'struct lpddr2_min_tck'
+- Custom configurations: customizable policy options through
+  'struct emif_custom_configs'
+- IP revision
+- PHY type
+
+Interface to the external world
+===============================
+EMIF driver registers notifiers for voltage and frequency changes
+affecting EMIF and takes appropriate actions when these are invoked.
+
+- freq_pre_notify_handling()
+- freq_post_notify_handling()
+- volt_notify_handling()
+
+Debugfs
+=======
+The driver creates two debugfs entries per device.
+
+- regcache_dump : dump of register values calculated and saved for all
+  frequencies used so far.
+- mr4 : last polled value of MR4 register in the LPDDR2 device. MR4
+  indicates the current temperature level of the device.
diff --git a/Documentation/driver-api/memory-devices/ti-gpmc.rst b/Documentation/driver-api/memory-devices/ti-gpmc.rst
new file mode 100644
index 000000000..b1bb86871
--- /dev/null
+++ b/Documentation/driver-api/memory-devices/ti-gpmc.rst
@@ -0,0 +1,179 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+========================================
+GPMC (General Purpose Memory Controller)
+========================================
+
+GPMC is an unified memory controller dedicated to interfacing external
+memory devices like
+
+ * Asynchronous SRAM like memories and application specific integrated
+   circuit devices.
+ * Asynchronous, synchronous, and page mode burst NOR flash devices
+   NAND flash
+ * Pseudo-SRAM devices
+
+GPMC is found on Texas Instruments SoC's (OMAP based)
+IP details: https://www.ti.com/lit/pdf/spruh73 section 7.1
+
+
+GPMC generic timing calculation:
+================================
+
+GPMC has certain timings that has to be programmed for proper
+functioning of the peripheral, while peripheral has another set of
+timings. To have peripheral work with gpmc, peripheral timings has to
+be translated to the form gpmc can understand. The way it has to be
+translated depends on the connected peripheral. Also there is a
+dependency for certain gpmc timings on gpmc clock frequency. Hence a
+generic timing routine was developed to achieve above requirements.
+
+Generic routine provides a generic method to calculate gpmc timings
+from gpmc peripheral timings. struct gpmc_device_timings fields has to
+be updated with timings from the datasheet of the peripheral that is
+connected to gpmc. A few of the peripheral timings can be fed either
+in time or in cycles, provision to handle this scenario has been
+provided (refer struct gpmc_device_timings definition). It may so
+happen that timing as specified by peripheral datasheet is not present
+in timing structure, in this scenario, try to correlate peripheral
+timing to the one available. If that doesn't work, try to add a new
+field as required by peripheral, educate generic timing routine to
+handle it, make sure that it does not break any of the existing.
+Then there may be cases where peripheral datasheet doesn't mention
+certain fields of struct gpmc_device_timings, zero those entries.
+
+Generic timing routine has been verified to work properly on
+multiple onenand's and tusb6010 peripherals.
+
+A word of caution: generic timing routine has been developed based
+on understanding of gpmc timings, peripheral timings, available
+custom timing routines, a kind of reverse engineering without
+most of the datasheets & hardware (to be exact none of those supported
+in mainline having custom timing routine) and by simulation.
+
+gpmc timing dependency on peripheral timings:
+
+[<gpmc_timing>: <peripheral timing1>, <peripheral timing2> ...]
+
+1. common
+
+cs_on:
+	t_ceasu
+adv_on:
+	t_avdasu, t_ceavd
+
+2. sync common
+
+sync_clk:
+	clk
+page_burst_access:
+	t_bacc
+clk_activation:
+	t_ces, t_avds
+
+3. read async muxed
+
+adv_rd_off:
+	t_avdp_r
+oe_on:
+	t_oeasu, t_aavdh
+access:
+	t_iaa, t_oe, t_ce, t_aa
+rd_cycle:
+	t_rd_cycle, t_cez_r, t_oez
+
+4. read async non-muxed
+
+adv_rd_off:
+	t_avdp_r
+oe_on:
+	t_oeasu
+access:
+	t_iaa, t_oe, t_ce, t_aa
+rd_cycle:
+	t_rd_cycle, t_cez_r, t_oez
+
+5. read sync muxed
+
+adv_rd_off:
+	t_avdp_r, t_avdh
+oe_on:
+	t_oeasu, t_ach, cyc_aavdh_oe
+access:
+	t_iaa, cyc_iaa, cyc_oe
+rd_cycle:
+	t_cez_r, t_oez, t_ce_rdyz
+
+6. read sync non-muxed
+
+adv_rd_off:
+	t_avdp_r
+oe_on:
+	t_oeasu
+access:
+	t_iaa, cyc_iaa, cyc_oe
+rd_cycle:
+	t_cez_r, t_oez, t_ce_rdyz
+
+7. write async muxed
+
+adv_wr_off:
+	t_avdp_w
+we_on, wr_data_mux_bus:
+	t_weasu, t_aavdh, cyc_aavhd_we
+we_off:
+	t_wpl
+cs_wr_off:
+	t_wph
+wr_cycle:
+	t_cez_w, t_wr_cycle
+
+8. write async non-muxed
+
+adv_wr_off:
+	t_avdp_w
+we_on, wr_data_mux_bus:
+	t_weasu
+we_off:
+	t_wpl
+cs_wr_off:
+	t_wph
+wr_cycle:
+	t_cez_w, t_wr_cycle
+
+9. write sync muxed
+
+adv_wr_off:
+	t_avdp_w, t_avdh
+we_on, wr_data_mux_bus:
+	t_weasu, t_rdyo, t_aavdh, cyc_aavhd_we
+we_off:
+	t_wpl, cyc_wpl
+cs_wr_off:
+	t_wph
+wr_cycle:
+	t_cez_w, t_ce_rdyz
+
+10. write sync non-muxed
+
+adv_wr_off:
+	t_avdp_w
+we_on, wr_data_mux_bus:
+	t_weasu, t_rdyo
+we_off:
+	t_wpl, cyc_wpl
+cs_wr_off:
+	t_wph
+wr_cycle:
+	t_cez_w, t_ce_rdyz
+
+
+Note:
+  Many of gpmc timings are dependent on other gpmc timings (a few
+  gpmc timings purely dependent on other gpmc timings, a reason that
+  some of the gpmc timings are missing above), and it will result in
+  indirect dependency of peripheral timings to gpmc timings other than
+  mentioned above, refer timing routine for more details. To know what
+  these peripheral timings correspond to, please see explanations in
+  struct gpmc_device_timings definition. And for gpmc timings refer
+  IP details (link above).