diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/fb/pxafb.rst | |
parent | Initial commit. (diff) | |
download | linux-upstream/5.10.209.tar.xz linux-upstream/5.10.209.zip |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | Documentation/fb/pxafb.rst | 173 |
1 files changed, 173 insertions, 0 deletions
diff --git a/Documentation/fb/pxafb.rst b/Documentation/fb/pxafb.rst new file mode 100644 index 000000000..90177f5e7 --- /dev/null +++ b/Documentation/fb/pxafb.rst @@ -0,0 +1,173 @@ +================================ +Driver for PXA25x LCD controller +================================ + +The driver supports the following options, either via +options=<OPTIONS> when modular or video=pxafb:<OPTIONS> when built in. + +For example:: + + modprobe pxafb options=vmem:2M,mode:640x480-8,passive + +or on the kernel command line:: + + video=pxafb:vmem:2M,mode:640x480-8,passive + +vmem: VIDEO_MEM_SIZE + + Amount of video memory to allocate (can be suffixed with K or M + for kilobytes or megabytes) + +mode:XRESxYRES[-BPP] + + XRES == LCCR1_PPL + 1 + + YRES == LLCR2_LPP + 1 + + The resolution of the display in pixels + + BPP == The bit depth. Valid values are 1, 2, 4, 8 and 16. + +pixclock:PIXCLOCK + + Pixel clock in picoseconds + +left:LEFT == LCCR1_BLW + 1 + +right:RIGHT == LCCR1_ELW + 1 + +hsynclen:HSYNC == LCCR1_HSW + 1 + +upper:UPPER == LCCR2_BFW + +lower:LOWER == LCCR2_EFR + +vsynclen:VSYNC == LCCR2_VSW + 1 + + Display margins and sync times + +color | mono => LCCR0_CMS + + umm... + +active | passive => LCCR0_PAS + + Active (TFT) or Passive (STN) display + +single | dual => LCCR0_SDS + + Single or dual panel passive display + +4pix | 8pix => LCCR0_DPD + + 4 or 8 pixel monochrome single panel data + +hsync:HSYNC, vsync:VSYNC + + Horizontal and vertical sync. 0 => active low, 1 => active + high. + +dpc:DPC + + Double pixel clock. 1=>true, 0=>false + +outputen:POLARITY + + Output Enable Polarity. 0 => active low, 1 => active high + +pixclockpol:POLARITY + + pixel clock polarity + 0 => falling edge, 1 => rising edge + + +Overlay Support for PXA27x and later LCD controllers +==================================================== + + PXA27x and later processors support overlay1 and overlay2 on-top of the + base framebuffer (although under-neath the base is also possible). They + support palette and no-palette RGB formats, as well as YUV formats (only + available on overlay2). These overlays have dedicated DMA channels and + behave in a similar way as a framebuffer. + + However, there are some differences between these overlay framebuffers + and normal framebuffers, as listed below: + + 1. overlay can start at a 32-bit word aligned position within the base + framebuffer, which means they have a start (x, y). This information + is encoded into var->nonstd (no, var->xoffset and var->yoffset are + not for such purpose). + + 2. overlay framebuffer is allocated dynamically according to specified + 'struct fb_var_screeninfo', the amount is decided by:: + + var->xres_virtual * var->yres_virtual * bpp + + bpp = 16 -- for RGB565 or RGBT555 + + bpp = 24 -- for YUV444 packed + + bpp = 24 -- for YUV444 planar + + bpp = 16 -- for YUV422 planar (1 pixel = 1 Y + 1/2 Cb + 1/2 Cr) + + bpp = 12 -- for YUV420 planar (1 pixel = 1 Y + 1/4 Cb + 1/4 Cr) + + NOTE: + + a. overlay does not support panning in x-direction, thus + var->xres_virtual will always be equal to var->xres + + b. line length of overlay(s) must be on a 32-bit word boundary, + for YUV planar modes, it is a requirement for the component + with minimum bits per pixel, e.g. for YUV420, Cr component + for one pixel is actually 2-bits, it means the line length + should be a multiple of 16-pixels + + c. starting horizontal position (XPOS) should start on a 32-bit + word boundary, otherwise the fb_check_var() will just fail. + + d. the rectangle of the overlay should be within the base plane, + otherwise fail + + Applications should follow the sequence below to operate an overlay + framebuffer: + + a. open("/dev/fb[1-2]", ...) + b. ioctl(fd, FBIOGET_VSCREENINFO, ...) + c. modify 'var' with desired parameters: + + 1) var->xres and var->yres + 2) larger var->yres_virtual if more memory is required, + usually for double-buffering + 3) var->nonstd for starting (x, y) and color format + 4) var->{red, green, blue, transp} if RGB mode is to be used + + d. ioctl(fd, FBIOPUT_VSCREENINFO, ...) + e. ioctl(fd, FBIOGET_FSCREENINFO, ...) + f. mmap + g. ... + + 3. for YUV planar formats, these are actually not supported within the + framebuffer framework, application has to take care of the offsets + and lengths of each component within the framebuffer. + + 4. var->nonstd is used to pass starting (x, y) position and color format, + the detailed bit fields are shown below:: + + 31 23 20 10 0 + +-----------------+---+----------+----------+ + | ... unused ... |FOR| XPOS | YPOS | + +-----------------+---+----------+----------+ + + FOR - color format, as defined by OVERLAY_FORMAT_* in pxafb.h + + - 0 - RGB + - 1 - YUV444 PACKED + - 2 - YUV444 PLANAR + - 3 - YUV422 PLANAR + - 4 - YUR420 PLANAR + + XPOS - starting horizontal position + + YPOS - starting vertical position |