diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/filesystems/squashfs.rst | |
parent | Initial commit. (diff) | |
download | linux-430c2fc249ea5c0536abd21c23382884005c9093.tar.xz linux-430c2fc249ea5c0536abd21c23382884005c9093.zip |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/filesystems/squashfs.rst')
-rw-r--r-- | Documentation/filesystems/squashfs.rst | 265 |
1 files changed, 265 insertions, 0 deletions
diff --git a/Documentation/filesystems/squashfs.rst b/Documentation/filesystems/squashfs.rst new file mode 100644 index 000000000..df42106ba --- /dev/null +++ b/Documentation/filesystems/squashfs.rst @@ -0,0 +1,265 @@ +.. SPDX-License-Identifier: GPL-2.0 + +======================= +Squashfs 4.0 Filesystem +======================= + +Squashfs is a compressed read-only filesystem for Linux. + +It uses zlib, lz4, lzo, or xz compression to compress files, inodes and +directories. Inodes in the system are very small and all blocks are packed to +minimise data overhead. Block sizes greater than 4K are supported up to a +maximum of 1Mbytes (default block size 128K). + +Squashfs is intended for general read-only filesystem use, for archival +use (i.e. in cases where a .tar.gz file may be used), and in constrained +block device/memory systems (e.g. embedded systems) where low overhead is +needed. + +Mailing list: squashfs-devel@lists.sourceforge.net +Web site: www.squashfs.org + +1. Filesystem Features +---------------------- + +Squashfs filesystem features versus Cramfs: + +============================== ========= ========== + Squashfs Cramfs +============================== ========= ========== +Max filesystem size 2^64 256 MiB +Max file size ~ 2 TiB 16 MiB +Max files unlimited unlimited +Max directories unlimited unlimited +Max entries per directory unlimited unlimited +Max block size 1 MiB 4 KiB +Metadata compression yes no +Directory indexes yes no +Sparse file support yes no +Tail-end packing (fragments) yes no +Exportable (NFS etc.) yes no +Hard link support yes no +"." and ".." in readdir yes no +Real inode numbers yes no +32-bit uids/gids yes no +File creation time yes no +Xattr support yes no +ACL support no no +============================== ========= ========== + +Squashfs compresses data, inodes and directories. In addition, inode and +directory data are highly compacted, and packed on byte boundaries. Each +compressed inode is on average 8 bytes in length (the exact length varies on +file type, i.e. regular file, directory, symbolic link, and block/char device +inodes have different sizes). + +2. Using Squashfs +----------------- + +As squashfs is a read-only filesystem, the mksquashfs program must be used to +create populated squashfs filesystems. This and other squashfs utilities +can be obtained from http://www.squashfs.org. Usage instructions can be +obtained from this site also. + +The squashfs-tools development tree is now located on kernel.org + git://git.kernel.org/pub/scm/fs/squashfs/squashfs-tools.git + +3. Squashfs Filesystem Design +----------------------------- + +A squashfs filesystem consists of a maximum of nine parts, packed together on a +byte alignment:: + + --------------- + | superblock | + |---------------| + | compression | + | options | + |---------------| + | datablocks | + | & fragments | + |---------------| + | inode table | + |---------------| + | directory | + | table | + |---------------| + | fragment | + | table | + |---------------| + | export | + | table | + |---------------| + | uid/gid | + | lookup table | + |---------------| + | xattr | + | table | + --------------- + +Compressed data blocks are written to the filesystem as files are read from +the source directory, and checked for duplicates. Once all file data has been +written the completed inode, directory, fragment, export, uid/gid lookup and +xattr tables are written. + +3.1 Compression options +----------------------- + +Compressors can optionally support compression specific options (e.g. +dictionary size). If non-default compression options have been used, then +these are stored here. + +3.2 Inodes +---------- + +Metadata (inodes and directories) are compressed in 8Kbyte blocks. Each +compressed block is prefixed by a two byte length, the top bit is set if the +block is uncompressed. A block will be uncompressed if the -noI option is set, +or if the compressed block was larger than the uncompressed block. + +Inodes are packed into the metadata blocks, and are not aligned to block +boundaries, therefore inodes overlap compressed blocks. Inodes are identified +by a 48-bit number which encodes the location of the compressed metadata block +containing the inode, and the byte offset into that block where the inode is +placed (<block, offset>). + +To maximise compression there are different inodes for each file type +(regular file, directory, device, etc.), the inode contents and length +varying with the type. + +To further maximise compression, two types of regular file inode and +directory inode are defined: inodes optimised for frequently occurring +regular files and directories, and extended types where extra +information has to be stored. + +3.3 Directories +--------------- + +Like inodes, directories are packed into compressed metadata blocks, stored +in a directory table. Directories are accessed using the start address of +the metablock containing the directory and the offset into the +decompressed block (<block, offset>). + +Directories are organised in a slightly complex way, and are not simply +a list of file names. The organisation takes advantage of the +fact that (in most cases) the inodes of the files will be in the same +compressed metadata block, and therefore, can share the start block. +Directories are therefore organised in a two level list, a directory +header containing the shared start block value, and a sequence of directory +entries, each of which share the shared start block. A new directory header +is written once/if the inode start block changes. The directory +header/directory entry list is repeated as many times as necessary. + +Directories are sorted, and can contain a directory index to speed up +file lookup. Directory indexes store one entry per metablock, each entry +storing the index/filename mapping to the first directory header +in each metadata block. Directories are sorted in alphabetical order, +and at lookup the index is scanned linearly looking for the first filename +alphabetically larger than the filename being looked up. At this point the +location of the metadata block the filename is in has been found. +The general idea of the index is to ensure only one metadata block needs to be +decompressed to do a lookup irrespective of the length of the directory. +This scheme has the advantage that it doesn't require extra memory overhead +and doesn't require much extra storage on disk. + +3.4 File data +------------- + +Regular files consist of a sequence of contiguous compressed blocks, and/or a +compressed fragment block (tail-end packed block). The compressed size +of each datablock is stored in a block list contained within the +file inode. + +To speed up access to datablocks when reading 'large' files (256 Mbytes or +larger), the code implements an index cache that caches the mapping from +block index to datablock location on disk. + +The index cache allows Squashfs to handle large files (up to 1.75 TiB) while +retaining a simple and space-efficient block list on disk. The cache +is split into slots, caching up to eight 224 GiB files (128 KiB blocks). +Larger files use multiple slots, with 1.75 TiB files using all 8 slots. +The index cache is designed to be memory efficient, and by default uses +16 KiB. + +3.5 Fragment lookup table +------------------------- + +Regular files can contain a fragment index which is mapped to a fragment +location on disk and compressed size using a fragment lookup table. This +fragment lookup table is itself stored compressed into metadata blocks. +A second index table is used to locate these. This second index table for +speed of access (and because it is small) is read at mount time and cached +in memory. + +3.6 Uid/gid lookup table +------------------------ + +For space efficiency regular files store uid and gid indexes, which are +converted to 32-bit uids/gids using an id look up table. This table is +stored compressed into metadata blocks. A second index table is used to +locate these. This second index table for speed of access (and because it +is small) is read at mount time and cached in memory. + +3.7 Export table +---------------- + +To enable Squashfs filesystems to be exportable (via NFS etc.) filesystems +can optionally (disabled with the -no-exports Mksquashfs option) contain +an inode number to inode disk location lookup table. This is required to +enable Squashfs to map inode numbers passed in filehandles to the inode +location on disk, which is necessary when the export code reinstantiates +expired/flushed inodes. + +This table is stored compressed into metadata blocks. A second index table is +used to locate these. This second index table for speed of access (and because +it is small) is read at mount time and cached in memory. + +3.8 Xattr table +--------------- + +The xattr table contains extended attributes for each inode. The xattrs +for each inode are stored in a list, each list entry containing a type, +name and value field. The type field encodes the xattr prefix +("user.", "trusted." etc) and it also encodes how the name/value fields +should be interpreted. Currently the type indicates whether the value +is stored inline (in which case the value field contains the xattr value), +or if it is stored out of line (in which case the value field stores a +reference to where the actual value is stored). This allows large values +to be stored out of line improving scanning and lookup performance and it +also allows values to be de-duplicated, the value being stored once, and +all other occurrences holding an out of line reference to that value. + +The xattr lists are packed into compressed 8K metadata blocks. +To reduce overhead in inodes, rather than storing the on-disk +location of the xattr list inside each inode, a 32-bit xattr id +is stored. This xattr id is mapped into the location of the xattr +list using a second xattr id lookup table. + +4. TODOs and Outstanding Issues +------------------------------- + +4.1 TODO list +------------- + +Implement ACL support. + +4.2 Squashfs Internal Cache +--------------------------- + +Blocks in Squashfs are compressed. To avoid repeatedly decompressing +recently accessed data Squashfs uses two small metadata and fragment caches. + +The cache is not used for file datablocks, these are decompressed and cached in +the page-cache in the normal way. The cache is used to temporarily cache +fragment and metadata blocks which have been read as a result of a metadata +(i.e. inode or directory) or fragment access. Because metadata and fragments +are packed together into blocks (to gain greater compression) the read of a +particular piece of metadata or fragment will retrieve other metadata/fragments +which have been packed with it, these because of locality-of-reference may be +read in the near future. Temporarily caching them ensures they are available +for near future access without requiring an additional read and decompress. + +In the future this internal cache may be replaced with an implementation which +uses the kernel page cache. Because the page cache operates on page sized +units this may introduce additional complexity in terms of locking and +associated race conditions. |