diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/hwmon/shtc1.rst | |
parent | Initial commit. (diff) | |
download | linux-430c2fc249ea5c0536abd21c23382884005c9093.tar.xz linux-430c2fc249ea5c0536abd21c23382884005c9093.zip |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/hwmon/shtc1.rst')
-rw-r--r-- | Documentation/hwmon/shtc1.rst | 67 |
1 files changed, 67 insertions, 0 deletions
diff --git a/Documentation/hwmon/shtc1.rst b/Documentation/hwmon/shtc1.rst new file mode 100644 index 000000000..f38c4c9d2 --- /dev/null +++ b/Documentation/hwmon/shtc1.rst @@ -0,0 +1,67 @@ +Kernel driver shtc1 +=================== + +Supported chips: + + * Sensirion SHTC1 + + Prefix: 'shtc1' + + Addresses scanned: none + + Datasheet: https://www.sensirion.com/file/datasheet_shtc1 + + + + * Sensirion SHTW1 + + Prefix: 'shtw1' + + Addresses scanned: none + + Datasheet: https://www.sensirion.com/file/datasheet_shtw1 + + + + * Sensirion SHTC3 + + Prefix: 'shtc3' + + Addresses scanned: none + + Datasheet: https://www.sensirion.com/file/datasheet_shtc3 + + + +Author: + + Johannes Winkelmann <johannes.winkelmann@sensirion.com> + +Description +----------- + +This driver implements support for the Sensirion SHTC1, SHTW1, and SHTC3 +chips, a humidity and temperature sensor. Temperature is measured in degrees +celsius, relative humidity is expressed as a percentage. + +The device communicates with the I2C protocol. All sensors are set to I2C +address 0x70. See Documentation/i2c/instantiating-devices.rst for methods to +instantiate the device. + +There are two options configurable by means of shtc1_platform_data: + +1. blocking (pull the I2C clock line down while performing the measurement) or + non-blocking mode. Blocking mode will guarantee the fastest result but + the I2C bus will be busy during that time. By default, non-blocking mode + is used. Make sure clock-stretching works properly on your device if you + want to use blocking mode. +2. high or low accuracy. High accuracy is used by default and using it is + strongly recommended. + +sysfs-Interface +--------------- + +temp1_input + - temperature input +humidity1_input + - humidity input |