Adding upstream version 5.10.209.upstream/5.10.209upstream

Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>

1 files changed, 45 insertions, 0 deletions

diff --git a/Documentation/i2c/busses/i2c-ali1535.rst b/Documentation/i2c/busses/i2c-ali1535.rst
new file mode 100644
index 000000000..694106473
--- /dev/null
+++ b/Documentation/i2c/busses/i2c-ali1535.rst
@@ -0,0 +1,45 @@
+=========================
+Kernel driver i2c-ali1535
+=========================
+
+Supported adapters:
+  * Acer Labs, Inc. ALI 1535 (south bridge)
+
+    Datasheet: Now under NDA
+	http://www.ali.com.tw/
+
+Authors:
+	- Frodo Looijaard <frodol@dds.nl>,
+	- Philip Edelbrock <phil@netroedge.com>,
+	- Mark D. Studebaker <mdsxyz123@yahoo.com>,
+	- Dan Eaton <dan.eaton@rocketlogix.com>,
+	- Stephen Rousset<stephen.rousset@rocketlogix.com>
+
+Description
+-----------
+
+This is the driver for the SMB Host controller on Acer Labs Inc. (ALI)
+M1535 South Bridge.
+
+The M1535 is a South bridge for portable systems. It is very similar to the
+M15x3 South bridges also produced by Acer Labs Inc.  Some of the registers
+within the part have moved and some have been redefined slightly.
+Additionally, the sequencing of the SMBus transactions has been modified to
+be more consistent with the sequencing recommended by the manufacturer and
+observed through testing.  These changes are reflected in this driver and
+can be identified by comparing this driver to the i2c-ali15x3 driver. For
+an overview of these chips see http://www.acerlabs.com
+
+The SMB controller is part of the M7101 device, which is an ACPI-compliant
+Power Management Unit (PMU).
+
+The whole M7101 device has to be enabled for the SMB to work. You can't
+just enable the SMB alone. The SMB and the ACPI have separate I/O spaces.
+We make sure that the SMB is enabled. We leave the ACPI alone.
+
+
+Features
+--------
+
+This driver controls the SMB Host only. This driver does not use
+interrupts.