diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/ia64/aliasing.rst | |
parent | Initial commit. (diff) | |
download | linux-upstream/5.10.209.tar.xz linux-upstream/5.10.209.zip |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r-- | Documentation/ia64/aliasing.rst | 246 |
1 files changed, 246 insertions, 0 deletions
diff --git a/Documentation/ia64/aliasing.rst b/Documentation/ia64/aliasing.rst new file mode 100644 index 000000000..a08b36aba --- /dev/null +++ b/Documentation/ia64/aliasing.rst @@ -0,0 +1,246 @@ +================================== +Memory Attribute Aliasing on IA-64 +================================== + +Bjorn Helgaas <bjorn.helgaas@hp.com> + +May 4, 2006 + + +Memory Attributes +================= + + Itanium supports several attributes for virtual memory references. + The attribute is part of the virtual translation, i.e., it is + contained in the TLB entry. The ones of most interest to the Linux + kernel are: + + == ====================== + WB Write-back (cacheable) + UC Uncacheable + WC Write-coalescing + == ====================== + + System memory typically uses the WB attribute. The UC attribute is + used for memory-mapped I/O devices. The WC attribute is uncacheable + like UC is, but writes may be delayed and combined to increase + performance for things like frame buffers. + + The Itanium architecture requires that we avoid accessing the same + page with both a cacheable mapping and an uncacheable mapping[1]. + + The design of the chipset determines which attributes are supported + on which regions of the address space. For example, some chipsets + support either WB or UC access to main memory, while others support + only WB access. + +Memory Map +========== + + Platform firmware describes the physical memory map and the + supported attributes for each region. At boot-time, the kernel uses + the EFI GetMemoryMap() interface. ACPI can also describe memory + devices and the attributes they support, but Linux/ia64 currently + doesn't use this information. + + The kernel uses the efi_memmap table returned from GetMemoryMap() to + learn the attributes supported by each region of physical address + space. Unfortunately, this table does not completely describe the + address space because some machines omit some or all of the MMIO + regions from the map. + + The kernel maintains another table, kern_memmap, which describes the + memory Linux is actually using and the attribute for each region. + This contains only system memory; it does not contain MMIO space. + + The kern_memmap table typically contains only a subset of the system + memory described by the efi_memmap. Linux/ia64 can't use all memory + in the system because of constraints imposed by the identity mapping + scheme. + + The efi_memmap table is preserved unmodified because the original + boot-time information is required for kexec. + +Kernel Identify Mappings +======================== + + Linux/ia64 identity mappings are done with large pages, currently + either 16MB or 64MB, referred to as "granules." Cacheable mappings + are speculative[2], so the processor can read any location in the + page at any time, independent of the programmer's intentions. This + means that to avoid attribute aliasing, Linux can create a cacheable + identity mapping only when the entire granule supports cacheable + access. + + Therefore, kern_memmap contains only full granule-sized regions that + can referenced safely by an identity mapping. + + Uncacheable mappings are not speculative, so the processor will + generate UC accesses only to locations explicitly referenced by + software. This allows UC identity mappings to cover granules that + are only partially populated, or populated with a combination of UC + and WB regions. + +User Mappings +============= + + User mappings are typically done with 16K or 64K pages. The smaller + page size allows more flexibility because only 16K or 64K has to be + homogeneous with respect to memory attributes. + +Potential Attribute Aliasing Cases +================================== + + There are several ways the kernel creates new mappings: + +mmap of /dev/mem +---------------- + + This uses remap_pfn_range(), which creates user mappings. These + mappings may be either WB or UC. If the region being mapped + happens to be in kern_memmap, meaning that it may also be mapped + by a kernel identity mapping, the user mapping must use the same + attribute as the kernel mapping. + + If the region is not in kern_memmap, the user mapping should use + an attribute reported as being supported in the EFI memory map. + + Since the EFI memory map does not describe MMIO on some + machines, this should use an uncacheable mapping as a fallback. + +mmap of /sys/class/pci_bus/.../legacy_mem +----------------------------------------- + + This is very similar to mmap of /dev/mem, except that legacy_mem + only allows mmap of the one megabyte "legacy MMIO" area for a + specific PCI bus. Typically this is the first megabyte of + physical address space, but it may be different on machines with + several VGA devices. + + "X" uses this to access VGA frame buffers. Using legacy_mem + rather than /dev/mem allows multiple instances of X to talk to + different VGA cards. + + The /dev/mem mmap constraints apply. + +mmap of /proc/bus/pci/.../??.? +------------------------------ + + This is an MMIO mmap of PCI functions, which additionally may or + may not be requested as using the WC attribute. + + If WC is requested, and the region in kern_memmap is either WC + or UC, and the EFI memory map designates the region as WC, then + the WC mapping is allowed. + + Otherwise, the user mapping must use the same attribute as the + kernel mapping. + +read/write of /dev/mem +---------------------- + + This uses copy_from_user(), which implicitly uses a kernel + identity mapping. This is obviously safe for things in + kern_memmap. + + There may be corner cases of things that are not in kern_memmap, + but could be accessed this way. For example, registers in MMIO + space are not in kern_memmap, but could be accessed with a UC + mapping. This would not cause attribute aliasing. But + registers typically can be accessed only with four-byte or + eight-byte accesses, and the copy_from_user() path doesn't allow + any control over the access size, so this would be dangerous. + +ioremap() +--------- + + This returns a mapping for use inside the kernel. + + If the region is in kern_memmap, we should use the attribute + specified there. + + If the EFI memory map reports that the entire granule supports + WB, we should use that (granules that are partially reserved + or occupied by firmware do not appear in kern_memmap). + + If the granule contains non-WB memory, but we can cover the + region safely with kernel page table mappings, we can use + ioremap_page_range() as most other architectures do. + + Failing all of the above, we have to fall back to a UC mapping. + +Past Problem Cases +================== + +mmap of various MMIO regions from /dev/mem by "X" on Intel platforms +-------------------------------------------------------------------- + + The EFI memory map may not report these MMIO regions. + + These must be allowed so that X will work. This means that + when the EFI memory map is incomplete, every /dev/mem mmap must + succeed. It may create either WB or UC user mappings, depending + on whether the region is in kern_memmap or the EFI memory map. + +mmap of 0x0-0x9FFFF /dev/mem by "hwinfo" on HP sx1000 with VGA enabled +---------------------------------------------------------------------- + + The EFI memory map reports the following attributes: + + =============== ======= ================== + 0x00000-0x9FFFF WB only + 0xA0000-0xBFFFF UC only (VGA frame buffer) + 0xC0000-0xFFFFF WB only + =============== ======= ================== + + This mmap is done with user pages, not kernel identity mappings, + so it is safe to use WB mappings. + + The kernel VGA driver may ioremap the VGA frame buffer at 0xA0000, + which uses a granule-sized UC mapping. This granule will cover some + WB-only memory, but since UC is non-speculative, the processor will + never generate an uncacheable reference to the WB-only areas unless + the driver explicitly touches them. + +mmap of 0x0-0xFFFFF legacy_mem by "X" +------------------------------------- + + If the EFI memory map reports that the entire range supports the + same attributes, we can allow the mmap (and we will prefer WB if + supported, as is the case with HP sx[12]000 machines with VGA + disabled). + + If EFI reports the range as partly WB and partly UC (as on sx[12]000 + machines with VGA enabled), we must fail the mmap because there's no + safe attribute to use. + + If EFI reports some of the range but not all (as on Intel firmware + that doesn't report the VGA frame buffer at all), we should fail the + mmap and force the user to map just the specific region of interest. + +mmap of 0xA0000-0xBFFFF legacy_mem by "X" on HP sx1000 with VGA disabled +------------------------------------------------------------------------ + + The EFI memory map reports the following attributes:: + + 0x00000-0xFFFFF WB only (no VGA MMIO hole) + + This is a special case of the previous case, and the mmap should + fail for the same reason as above. + +read of /sys/devices/.../rom +---------------------------- + + For VGA devices, this may cause an ioremap() of 0xC0000. This + used to be done with a UC mapping, because the VGA frame buffer + at 0xA0000 prevents use of a WB granule. The UC mapping causes + an MCA on HP sx[12]000 chipsets. + + We should use WB page table mappings to avoid covering the VGA + frame buffer. + +Notes +===== + + [1] SDM rev 2.2, vol 2, sec 4.4.1. + [2] SDM rev 2.2, vol 2, sec 4.4.6. |