summaryrefslogtreecommitdiffstats
path: root/Documentation/networking/device_drivers/cellular
diff options
context:
space:
mode:
authorDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-27 10:05:51 +0000
committerDaniel Baumann <daniel.baumann@progress-linux.org>2024-04-27 10:05:51 +0000
commit5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch)
treea94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/networking/device_drivers/cellular
parentInitial commit. (diff)
downloadlinux-upstream/5.10.209.tar.xz
linux-upstream/5.10.209.zip
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to '')
-rw-r--r--Documentation/networking/device_drivers/cellular/index.rst18
-rw-r--r--Documentation/networking/device_drivers/cellular/qualcomm/rmnet.rst95
2 files changed, 113 insertions, 0 deletions
diff --git a/Documentation/networking/device_drivers/cellular/index.rst b/Documentation/networking/device_drivers/cellular/index.rst
new file mode 100644
index 000000000..fc1812d3f
--- /dev/null
+++ b/Documentation/networking/device_drivers/cellular/index.rst
@@ -0,0 +1,18 @@
+.. SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+
+Cellular Modem Device Drivers
+=============================
+
+Contents:
+
+.. toctree::
+ :maxdepth: 2
+
+ qualcomm/rmnet
+
+.. only:: subproject and html
+
+ Indices
+ =======
+
+ * :ref:`genindex`
diff --git a/Documentation/networking/device_drivers/cellular/qualcomm/rmnet.rst b/Documentation/networking/device_drivers/cellular/qualcomm/rmnet.rst
new file mode 100644
index 000000000..70643b58d
--- /dev/null
+++ b/Documentation/networking/device_drivers/cellular/qualcomm/rmnet.rst
@@ -0,0 +1,95 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+============
+Rmnet Driver
+============
+
+1. Introduction
+===============
+
+rmnet driver is used for supporting the Multiplexing and aggregation
+Protocol (MAP). This protocol is used by all recent chipsets using Qualcomm
+Technologies, Inc. modems.
+
+This driver can be used to register onto any physical network device in
+IP mode. Physical transports include USB, HSIC, PCIe and IP accelerator.
+
+Multiplexing allows for creation of logical netdevices (rmnet devices) to
+handle multiple private data networks (PDN) like a default internet, tethering,
+multimedia messaging service (MMS) or IP media subsystem (IMS). Hardware sends
+packets with MAP headers to rmnet. Based on the multiplexer id, rmnet
+routes to the appropriate PDN after removing the MAP header.
+
+Aggregation is required to achieve high data rates. This involves hardware
+sending aggregated bunch of MAP frames. rmnet driver will de-aggregate
+these MAP frames and send them to appropriate PDN's.
+
+2. Packet format
+================
+
+a. MAP packet (data / control)
+
+MAP header has the same endianness of the IP packet.
+
+Packet format::
+
+ Bit 0 1 2-7 8 - 15 16 - 31
+ Function Command / Data Reserved Pad Multiplexer ID Payload length
+ Bit 32 - x
+ Function Raw Bytes
+
+Command (1)/ Data (0) bit value is to indicate if the packet is a MAP command
+or data packet. Control packet is used for transport level flow control. Data
+packets are standard IP packets.
+
+Reserved bits are usually zeroed out and to be ignored by receiver.
+
+Padding is number of bytes to be added for 4 byte alignment if required by
+hardware.
+
+Multiplexer ID is to indicate the PDN on which data has to be sent.
+
+Payload length includes the padding length but does not include MAP header
+length.
+
+b. MAP packet (command specific)::
+
+ Bit 0 1 2-7 8 - 15 16 - 31
+ Function Command Reserved Pad Multiplexer ID Payload length
+ Bit 32 - 39 40 - 45 46 - 47 48 - 63
+ Function Command name Reserved Command Type Reserved
+ Bit 64 - 95
+ Function Transaction ID
+ Bit 96 - 127
+ Function Command data
+
+Command 1 indicates disabling flow while 2 is enabling flow
+
+Command types
+
+= ==========================================
+0 for MAP command request
+1 is to acknowledge the receipt of a command
+2 is for unsupported commands
+3 is for error during processing of commands
+= ==========================================
+
+c. Aggregation
+
+Aggregation is multiple MAP packets (can be data or command) delivered to
+rmnet in a single linear skb. rmnet will process the individual
+packets and either ACK the MAP command or deliver the IP packet to the
+network stack as needed
+
+MAP header|IP Packet|Optional padding|MAP header|IP Packet|Optional padding....
+
+MAP header|IP Packet|Optional padding|MAP header|Command Packet|Optional pad...
+
+3. Userspace configuration
+==========================
+
+rmnet userspace configuration is done through netlink library librmnetctl
+and command line utility rmnetcli. Utility is hosted in codeaurora forum git.
+The driver uses rtnl_link_ops for communication.
+
+https://source.codeaurora.org/quic/la/platform/vendor/qcom-opensource/dataservices/tree/rmnetctl