diff options
author | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
---|---|---|
committer | Daniel Baumann <daniel.baumann@progress-linux.org> | 2024-04-27 10:05:51 +0000 |
commit | 5d1646d90e1f2cceb9f0828f4b28318cd0ec7744 (patch) | |
tree | a94efe259b9009378be6d90eb30d2b019d95c194 /Documentation/networking/filter.rst | |
parent | Initial commit. (diff) | |
download | linux-430c2fc249ea5c0536abd21c23382884005c9093.tar.xz linux-430c2fc249ea5c0536abd21c23382884005c9093.zip |
Adding upstream version 5.10.209.upstream/5.10.209upstream
Signed-off-by: Daniel Baumann <daniel.baumann@progress-linux.org>
Diffstat (limited to 'Documentation/networking/filter.rst')
-rw-r--r-- | Documentation/networking/filter.rst | 1653 |
1 files changed, 1653 insertions, 0 deletions
diff --git a/Documentation/networking/filter.rst b/Documentation/networking/filter.rst new file mode 100644 index 000000000..debb59e37 --- /dev/null +++ b/Documentation/networking/filter.rst @@ -0,0 +1,1653 @@ +.. SPDX-License-Identifier: GPL-2.0 + +.. _networking-filter: + +======================================================= +Linux Socket Filtering aka Berkeley Packet Filter (BPF) +======================================================= + +Introduction +------------ + +Linux Socket Filtering (LSF) is derived from the Berkeley Packet Filter. +Though there are some distinct differences between the BSD and Linux +Kernel filtering, but when we speak of BPF or LSF in Linux context, we +mean the very same mechanism of filtering in the Linux kernel. + +BPF allows a user-space program to attach a filter onto any socket and +allow or disallow certain types of data to come through the socket. LSF +follows exactly the same filter code structure as BSD's BPF, so referring +to the BSD bpf.4 manpage is very helpful in creating filters. + +On Linux, BPF is much simpler than on BSD. One does not have to worry +about devices or anything like that. You simply create your filter code, +send it to the kernel via the SO_ATTACH_FILTER option and if your filter +code passes the kernel check on it, you then immediately begin filtering +data on that socket. + +You can also detach filters from your socket via the SO_DETACH_FILTER +option. This will probably not be used much since when you close a socket +that has a filter on it the filter is automagically removed. The other +less common case may be adding a different filter on the same socket where +you had another filter that is still running: the kernel takes care of +removing the old one and placing your new one in its place, assuming your +filter has passed the checks, otherwise if it fails the old filter will +remain on that socket. + +SO_LOCK_FILTER option allows to lock the filter attached to a socket. Once +set, a filter cannot be removed or changed. This allows one process to +setup a socket, attach a filter, lock it then drop privileges and be +assured that the filter will be kept until the socket is closed. + +The biggest user of this construct might be libpcap. Issuing a high-level +filter command like `tcpdump -i em1 port 22` passes through the libpcap +internal compiler that generates a structure that can eventually be loaded +via SO_ATTACH_FILTER to the kernel. `tcpdump -i em1 port 22 -ddd` +displays what is being placed into this structure. + +Although we were only speaking about sockets here, BPF in Linux is used +in many more places. There's xt_bpf for netfilter, cls_bpf in the kernel +qdisc layer, SECCOMP-BPF (SECure COMPuting [1]_), and lots of other places +such as team driver, PTP code, etc where BPF is being used. + +.. [1] Documentation/userspace-api/seccomp_filter.rst + +Original BPF paper: + +Steven McCanne and Van Jacobson. 1993. The BSD packet filter: a new +architecture for user-level packet capture. In Proceedings of the +USENIX Winter 1993 Conference Proceedings on USENIX Winter 1993 +Conference Proceedings (USENIX'93). USENIX Association, Berkeley, +CA, USA, 2-2. [http://www.tcpdump.org/papers/bpf-usenix93.pdf] + +Structure +--------- + +User space applications include <linux/filter.h> which contains the +following relevant structures:: + + struct sock_filter { /* Filter block */ + __u16 code; /* Actual filter code */ + __u8 jt; /* Jump true */ + __u8 jf; /* Jump false */ + __u32 k; /* Generic multiuse field */ + }; + +Such a structure is assembled as an array of 4-tuples, that contains +a code, jt, jf and k value. jt and jf are jump offsets and k a generic +value to be used for a provided code:: + + struct sock_fprog { /* Required for SO_ATTACH_FILTER. */ + unsigned short len; /* Number of filter blocks */ + struct sock_filter __user *filter; + }; + +For socket filtering, a pointer to this structure (as shown in +follow-up example) is being passed to the kernel through setsockopt(2). + +Example +------- + +:: + + #include <sys/socket.h> + #include <sys/types.h> + #include <arpa/inet.h> + #include <linux/if_ether.h> + /* ... */ + + /* From the example above: tcpdump -i em1 port 22 -dd */ + struct sock_filter code[] = { + { 0x28, 0, 0, 0x0000000c }, + { 0x15, 0, 8, 0x000086dd }, + { 0x30, 0, 0, 0x00000014 }, + { 0x15, 2, 0, 0x00000084 }, + { 0x15, 1, 0, 0x00000006 }, + { 0x15, 0, 17, 0x00000011 }, + { 0x28, 0, 0, 0x00000036 }, + { 0x15, 14, 0, 0x00000016 }, + { 0x28, 0, 0, 0x00000038 }, + { 0x15, 12, 13, 0x00000016 }, + { 0x15, 0, 12, 0x00000800 }, + { 0x30, 0, 0, 0x00000017 }, + { 0x15, 2, 0, 0x00000084 }, + { 0x15, 1, 0, 0x00000006 }, + { 0x15, 0, 8, 0x00000011 }, + { 0x28, 0, 0, 0x00000014 }, + { 0x45, 6, 0, 0x00001fff }, + { 0xb1, 0, 0, 0x0000000e }, + { 0x48, 0, 0, 0x0000000e }, + { 0x15, 2, 0, 0x00000016 }, + { 0x48, 0, 0, 0x00000010 }, + { 0x15, 0, 1, 0x00000016 }, + { 0x06, 0, 0, 0x0000ffff }, + { 0x06, 0, 0, 0x00000000 }, + }; + + struct sock_fprog bpf = { + .len = ARRAY_SIZE(code), + .filter = code, + }; + + sock = socket(PF_PACKET, SOCK_RAW, htons(ETH_P_ALL)); + if (sock < 0) + /* ... bail out ... */ + + ret = setsockopt(sock, SOL_SOCKET, SO_ATTACH_FILTER, &bpf, sizeof(bpf)); + if (ret < 0) + /* ... bail out ... */ + + /* ... */ + close(sock); + +The above example code attaches a socket filter for a PF_PACKET socket +in order to let all IPv4/IPv6 packets with port 22 pass. The rest will +be dropped for this socket. + +The setsockopt(2) call to SO_DETACH_FILTER doesn't need any arguments +and SO_LOCK_FILTER for preventing the filter to be detached, takes an +integer value with 0 or 1. + +Note that socket filters are not restricted to PF_PACKET sockets only, +but can also be used on other socket families. + +Summary of system calls: + + * setsockopt(sockfd, SOL_SOCKET, SO_ATTACH_FILTER, &val, sizeof(val)); + * setsockopt(sockfd, SOL_SOCKET, SO_DETACH_FILTER, &val, sizeof(val)); + * setsockopt(sockfd, SOL_SOCKET, SO_LOCK_FILTER, &val, sizeof(val)); + +Normally, most use cases for socket filtering on packet sockets will be +covered by libpcap in high-level syntax, so as an application developer +you should stick to that. libpcap wraps its own layer around all that. + +Unless i) using/linking to libpcap is not an option, ii) the required BPF +filters use Linux extensions that are not supported by libpcap's compiler, +iii) a filter might be more complex and not cleanly implementable with +libpcap's compiler, or iv) particular filter codes should be optimized +differently than libpcap's internal compiler does; then in such cases +writing such a filter "by hand" can be of an alternative. For example, +xt_bpf and cls_bpf users might have requirements that could result in +more complex filter code, or one that cannot be expressed with libpcap +(e.g. different return codes for various code paths). Moreover, BPF JIT +implementors may wish to manually write test cases and thus need low-level +access to BPF code as well. + +BPF engine and instruction set +------------------------------ + +Under tools/bpf/ there's a small helper tool called bpf_asm which can +be used to write low-level filters for example scenarios mentioned in the +previous section. Asm-like syntax mentioned here has been implemented in +bpf_asm and will be used for further explanations (instead of dealing with +less readable opcodes directly, principles are the same). The syntax is +closely modelled after Steven McCanne's and Van Jacobson's BPF paper. + +The BPF architecture consists of the following basic elements: + + ======= ==================================================== + Element Description + ======= ==================================================== + A 32 bit wide accumulator + X 32 bit wide X register + M[] 16 x 32 bit wide misc registers aka "scratch memory + store", addressable from 0 to 15 + ======= ==================================================== + +A program, that is translated by bpf_asm into "opcodes" is an array that +consists of the following elements (as already mentioned):: + + op:16, jt:8, jf:8, k:32 + +The element op is a 16 bit wide opcode that has a particular instruction +encoded. jt and jf are two 8 bit wide jump targets, one for condition +"jump if true", the other one "jump if false". Eventually, element k +contains a miscellaneous argument that can be interpreted in different +ways depending on the given instruction in op. + +The instruction set consists of load, store, branch, alu, miscellaneous +and return instructions that are also represented in bpf_asm syntax. This +table lists all bpf_asm instructions available resp. what their underlying +opcodes as defined in linux/filter.h stand for: + + =========== =================== ===================== + Instruction Addressing mode Description + =========== =================== ===================== + ld 1, 2, 3, 4, 12 Load word into A + ldi 4 Load word into A + ldh 1, 2 Load half-word into A + ldb 1, 2 Load byte into A + ldx 3, 4, 5, 12 Load word into X + ldxi 4 Load word into X + ldxb 5 Load byte into X + + st 3 Store A into M[] + stx 3 Store X into M[] + + jmp 6 Jump to label + ja 6 Jump to label + jeq 7, 8, 9, 10 Jump on A == <x> + jneq 9, 10 Jump on A != <x> + jne 9, 10 Jump on A != <x> + jlt 9, 10 Jump on A < <x> + jle 9, 10 Jump on A <= <x> + jgt 7, 8, 9, 10 Jump on A > <x> + jge 7, 8, 9, 10 Jump on A >= <x> + jset 7, 8, 9, 10 Jump on A & <x> + + add 0, 4 A + <x> + sub 0, 4 A - <x> + mul 0, 4 A * <x> + div 0, 4 A / <x> + mod 0, 4 A % <x> + neg !A + and 0, 4 A & <x> + or 0, 4 A | <x> + xor 0, 4 A ^ <x> + lsh 0, 4 A << <x> + rsh 0, 4 A >> <x> + + tax Copy A into X + txa Copy X into A + + ret 4, 11 Return + =========== =================== ===================== + +The next table shows addressing formats from the 2nd column: + + =============== =================== =============================================== + Addressing mode Syntax Description + =============== =================== =============================================== + 0 x/%x Register X + 1 [k] BHW at byte offset k in the packet + 2 [x + k] BHW at the offset X + k in the packet + 3 M[k] Word at offset k in M[] + 4 #k Literal value stored in k + 5 4*([k]&0xf) Lower nibble * 4 at byte offset k in the packet + 6 L Jump label L + 7 #k,Lt,Lf Jump to Lt if true, otherwise jump to Lf + 8 x/%x,Lt,Lf Jump to Lt if true, otherwise jump to Lf + 9 #k,Lt Jump to Lt if predicate is true + 10 x/%x,Lt Jump to Lt if predicate is true + 11 a/%a Accumulator A + 12 extension BPF extension + =============== =================== =============================================== + +The Linux kernel also has a couple of BPF extensions that are used along +with the class of load instructions by "overloading" the k argument with +a negative offset + a particular extension offset. The result of such BPF +extensions are loaded into A. + +Possible BPF extensions are shown in the following table: + + =================================== ================================================= + Extension Description + =================================== ================================================= + len skb->len + proto skb->protocol + type skb->pkt_type + poff Payload start offset + ifidx skb->dev->ifindex + nla Netlink attribute of type X with offset A + nlan Nested Netlink attribute of type X with offset A + mark skb->mark + queue skb->queue_mapping + hatype skb->dev->type + rxhash skb->hash + cpu raw_smp_processor_id() + vlan_tci skb_vlan_tag_get(skb) + vlan_avail skb_vlan_tag_present(skb) + vlan_tpid skb->vlan_proto + rand prandom_u32() + =================================== ================================================= + +These extensions can also be prefixed with '#'. +Examples for low-level BPF: + +**ARP packets**:: + + ldh [12] + jne #0x806, drop + ret #-1 + drop: ret #0 + +**IPv4 TCP packets**:: + + ldh [12] + jne #0x800, drop + ldb [23] + jneq #6, drop + ret #-1 + drop: ret #0 + +**(Accelerated) VLAN w/ id 10**:: + + ld vlan_tci + jneq #10, drop + ret #-1 + drop: ret #0 + +**icmp random packet sampling, 1 in 4**: + + ldh [12] + jne #0x800, drop + ldb [23] + jneq #1, drop + # get a random uint32 number + ld rand + mod #4 + jneq #1, drop + ret #-1 + drop: ret #0 + +**SECCOMP filter example**:: + + ld [4] /* offsetof(struct seccomp_data, arch) */ + jne #0xc000003e, bad /* AUDIT_ARCH_X86_64 */ + ld [0] /* offsetof(struct seccomp_data, nr) */ + jeq #15, good /* __NR_rt_sigreturn */ + jeq #231, good /* __NR_exit_group */ + jeq #60, good /* __NR_exit */ + jeq #0, good /* __NR_read */ + jeq #1, good /* __NR_write */ + jeq #5, good /* __NR_fstat */ + jeq #9, good /* __NR_mmap */ + jeq #14, good /* __NR_rt_sigprocmask */ + jeq #13, good /* __NR_rt_sigaction */ + jeq #35, good /* __NR_nanosleep */ + bad: ret #0 /* SECCOMP_RET_KILL_THREAD */ + good: ret #0x7fff0000 /* SECCOMP_RET_ALLOW */ + +The above example code can be placed into a file (here called "foo"), and +then be passed to the bpf_asm tool for generating opcodes, output that xt_bpf +and cls_bpf understands and can directly be loaded with. Example with above +ARP code:: + + $ ./bpf_asm foo + 4,40 0 0 12,21 0 1 2054,6 0 0 4294967295,6 0 0 0, + +In copy and paste C-like output:: + + $ ./bpf_asm -c foo + { 0x28, 0, 0, 0x0000000c }, + { 0x15, 0, 1, 0x00000806 }, + { 0x06, 0, 0, 0xffffffff }, + { 0x06, 0, 0, 0000000000 }, + +In particular, as usage with xt_bpf or cls_bpf can result in more complex BPF +filters that might not be obvious at first, it's good to test filters before +attaching to a live system. For that purpose, there's a small tool called +bpf_dbg under tools/bpf/ in the kernel source directory. This debugger allows +for testing BPF filters against given pcap files, single stepping through the +BPF code on the pcap's packets and to do BPF machine register dumps. + +Starting bpf_dbg is trivial and just requires issuing:: + + # ./bpf_dbg + +In case input and output do not equal stdin/stdout, bpf_dbg takes an +alternative stdin source as a first argument, and an alternative stdout +sink as a second one, e.g. `./bpf_dbg test_in.txt test_out.txt`. + +Other than that, a particular libreadline configuration can be set via +file "~/.bpf_dbg_init" and the command history is stored in the file +"~/.bpf_dbg_history". + +Interaction in bpf_dbg happens through a shell that also has auto-completion +support (follow-up example commands starting with '>' denote bpf_dbg shell). +The usual workflow would be to ... + +* load bpf 6,40 0 0 12,21 0 3 2048,48 0 0 23,21 0 1 1,6 0 0 65535,6 0 0 0 + Loads a BPF filter from standard output of bpf_asm, or transformed via + e.g. ``tcpdump -iem1 -ddd port 22 | tr '\n' ','``. Note that for JIT + debugging (next section), this command creates a temporary socket and + loads the BPF code into the kernel. Thus, this will also be useful for + JIT developers. + +* load pcap foo.pcap + + Loads standard tcpdump pcap file. + +* run [<n>] + +bpf passes:1 fails:9 + Runs through all packets from a pcap to account how many passes and fails + the filter will generate. A limit of packets to traverse can be given. + +* disassemble:: + + l0: ldh [12] + l1: jeq #0x800, l2, l5 + l2: ldb [23] + l3: jeq #0x1, l4, l5 + l4: ret #0xffff + l5: ret #0 + + Prints out BPF code disassembly. + +* dump:: + + /* { op, jt, jf, k }, */ + { 0x28, 0, 0, 0x0000000c }, + { 0x15, 0, 3, 0x00000800 }, + { 0x30, 0, 0, 0x00000017 }, + { 0x15, 0, 1, 0x00000001 }, + { 0x06, 0, 0, 0x0000ffff }, + { 0x06, 0, 0, 0000000000 }, + + Prints out C-style BPF code dump. + +* breakpoint 0:: + + breakpoint at: l0: ldh [12] + +* breakpoint 1:: + + breakpoint at: l1: jeq #0x800, l2, l5 + + ... + + Sets breakpoints at particular BPF instructions. Issuing a `run` command + will walk through the pcap file continuing from the current packet and + break when a breakpoint is being hit (another `run` will continue from + the currently active breakpoint executing next instructions): + + * run:: + + -- register dump -- + pc: [0] <-- program counter + code: [40] jt[0] jf[0] k[12] <-- plain BPF code of current instruction + curr: l0: ldh [12] <-- disassembly of current instruction + A: [00000000][0] <-- content of A (hex, decimal) + X: [00000000][0] <-- content of X (hex, decimal) + M[0,15]: [00000000][0] <-- folded content of M (hex, decimal) + -- packet dump -- <-- Current packet from pcap (hex) + len: 42 + 0: 00 19 cb 55 55 a4 00 14 a4 43 78 69 08 06 00 01 + 16: 08 00 06 04 00 01 00 14 a4 43 78 69 0a 3b 01 26 + 32: 00 00 00 00 00 00 0a 3b 01 01 + (breakpoint) + > + + * breakpoint:: + + breakpoints: 0 1 + + Prints currently set breakpoints. + +* step [-<n>, +<n>] + + Performs single stepping through the BPF program from the current pc + offset. Thus, on each step invocation, above register dump is issued. + This can go forwards and backwards in time, a plain `step` will break + on the next BPF instruction, thus +1. (No `run` needs to be issued here.) + +* select <n> + + Selects a given packet from the pcap file to continue from. Thus, on + the next `run` or `step`, the BPF program is being evaluated against + the user pre-selected packet. Numbering starts just as in Wireshark + with index 1. + +* quit + + Exits bpf_dbg. + +JIT compiler +------------ + +The Linux kernel has a built-in BPF JIT compiler for x86_64, SPARC, +PowerPC, ARM, ARM64, MIPS, RISC-V and s390 and can be enabled through +CONFIG_BPF_JIT. The JIT compiler is transparently invoked for each +attached filter from user space or for internal kernel users if it has +been previously enabled by root:: + + echo 1 > /proc/sys/net/core/bpf_jit_enable + +For JIT developers, doing audits etc, each compile run can output the generated +opcode image into the kernel log via:: + + echo 2 > /proc/sys/net/core/bpf_jit_enable + +Example output from dmesg:: + + [ 3389.935842] flen=6 proglen=70 pass=3 image=ffffffffa0069c8f + [ 3389.935847] JIT code: 00000000: 55 48 89 e5 48 83 ec 60 48 89 5d f8 44 8b 4f 68 + [ 3389.935849] JIT code: 00000010: 44 2b 4f 6c 4c 8b 87 d8 00 00 00 be 0c 00 00 00 + [ 3389.935850] JIT code: 00000020: e8 1d 94 ff e0 3d 00 08 00 00 75 16 be 17 00 00 + [ 3389.935851] JIT code: 00000030: 00 e8 28 94 ff e0 83 f8 01 75 07 b8 ff ff 00 00 + [ 3389.935852] JIT code: 00000040: eb 02 31 c0 c9 c3 + +When CONFIG_BPF_JIT_ALWAYS_ON is enabled, bpf_jit_enable is permanently set to 1 and +setting any other value than that will return in failure. This is even the case for +setting bpf_jit_enable to 2, since dumping the final JIT image into the kernel log +is discouraged and introspection through bpftool (under tools/bpf/bpftool/) is the +generally recommended approach instead. + +In the kernel source tree under tools/bpf/, there's bpf_jit_disasm for +generating disassembly out of the kernel log's hexdump:: + + # ./bpf_jit_disasm + 70 bytes emitted from JIT compiler (pass:3, flen:6) + ffffffffa0069c8f + <x>: + 0: push %rbp + 1: mov %rsp,%rbp + 4: sub $0x60,%rsp + 8: mov %rbx,-0x8(%rbp) + c: mov 0x68(%rdi),%r9d + 10: sub 0x6c(%rdi),%r9d + 14: mov 0xd8(%rdi),%r8 + 1b: mov $0xc,%esi + 20: callq 0xffffffffe0ff9442 + 25: cmp $0x800,%eax + 2a: jne 0x0000000000000042 + 2c: mov $0x17,%esi + 31: callq 0xffffffffe0ff945e + 36: cmp $0x1,%eax + 39: jne 0x0000000000000042 + 3b: mov $0xffff,%eax + 40: jmp 0x0000000000000044 + 42: xor %eax,%eax + 44: leaveq + 45: retq + + Issuing option `-o` will "annotate" opcodes to resulting assembler + instructions, which can be very useful for JIT developers: + + # ./bpf_jit_disasm -o + 70 bytes emitted from JIT compiler (pass:3, flen:6) + ffffffffa0069c8f + <x>: + 0: push %rbp + 55 + 1: mov %rsp,%rbp + 48 89 e5 + 4: sub $0x60,%rsp + 48 83 ec 60 + 8: mov %rbx,-0x8(%rbp) + 48 89 5d f8 + c: mov 0x68(%rdi),%r9d + 44 8b 4f 68 + 10: sub 0x6c(%rdi),%r9d + 44 2b 4f 6c + 14: mov 0xd8(%rdi),%r8 + 4c 8b 87 d8 00 00 00 + 1b: mov $0xc,%esi + be 0c 00 00 00 + 20: callq 0xffffffffe0ff9442 + e8 1d 94 ff e0 + 25: cmp $0x800,%eax + 3d 00 08 00 00 + 2a: jne 0x0000000000000042 + 75 16 + 2c: mov $0x17,%esi + be 17 00 00 00 + 31: callq 0xffffffffe0ff945e + e8 28 94 ff e0 + 36: cmp $0x1,%eax + 83 f8 01 + 39: jne 0x0000000000000042 + 75 07 + 3b: mov $0xffff,%eax + b8 ff ff 00 00 + 40: jmp 0x0000000000000044 + eb 02 + 42: xor %eax,%eax + 31 c0 + 44: leaveq + c9 + 45: retq + c3 + +For BPF JIT developers, bpf_jit_disasm, bpf_asm and bpf_dbg provides a useful +toolchain for developing and testing the kernel's JIT compiler. + +BPF kernel internals +-------------------- +Internally, for the kernel interpreter, a different instruction set +format with similar underlying principles from BPF described in previous +paragraphs is being used. However, the instruction set format is modelled +closer to the underlying architecture to mimic native instruction sets, so +that a better performance can be achieved (more details later). This new +ISA is called 'eBPF' or 'internal BPF' interchangeably. (Note: eBPF which +originates from [e]xtended BPF is not the same as BPF extensions! While +eBPF is an ISA, BPF extensions date back to classic BPF's 'overloading' +of BPF_LD | BPF_{B,H,W} | BPF_ABS instruction.) + +It is designed to be JITed with one to one mapping, which can also open up +the possibility for GCC/LLVM compilers to generate optimized eBPF code through +an eBPF backend that performs almost as fast as natively compiled code. + +The new instruction set was originally designed with the possible goal in +mind to write programs in "restricted C" and compile into eBPF with a optional +GCC/LLVM backend, so that it can just-in-time map to modern 64-bit CPUs with +minimal performance overhead over two steps, that is, C -> eBPF -> native code. + +Currently, the new format is being used for running user BPF programs, which +includes seccomp BPF, classic socket filters, cls_bpf traffic classifier, +team driver's classifier for its load-balancing mode, netfilter's xt_bpf +extension, PTP dissector/classifier, and much more. They are all internally +converted by the kernel into the new instruction set representation and run +in the eBPF interpreter. For in-kernel handlers, this all works transparently +by using bpf_prog_create() for setting up the filter, resp. +bpf_prog_destroy() for destroying it. The macro +BPF_PROG_RUN(filter, ctx) transparently invokes eBPF interpreter or JITed +code to run the filter. 'filter' is a pointer to struct bpf_prog that we +got from bpf_prog_create(), and 'ctx' the given context (e.g. +skb pointer). All constraints and restrictions from bpf_check_classic() apply +before a conversion to the new layout is being done behind the scenes! + +Currently, the classic BPF format is being used for JITing on most +32-bit architectures, whereas x86-64, aarch64, s390x, powerpc64, +sparc64, arm32, riscv64, riscv32 perform JIT compilation from eBPF +instruction set. + +Some core changes of the new internal format: + +- Number of registers increase from 2 to 10: + + The old format had two registers A and X, and a hidden frame pointer. The + new layout extends this to be 10 internal registers and a read-only frame + pointer. Since 64-bit CPUs are passing arguments to functions via registers + the number of args from eBPF program to in-kernel function is restricted + to 5 and one register is used to accept return value from an in-kernel + function. Natively, x86_64 passes first 6 arguments in registers, aarch64/ + sparcv9/mips64 have 7 - 8 registers for arguments; x86_64 has 6 callee saved + registers, and aarch64/sparcv9/mips64 have 11 or more callee saved registers. + + Therefore, eBPF calling convention is defined as: + + * R0 - return value from in-kernel function, and exit value for eBPF program + * R1 - R5 - arguments from eBPF program to in-kernel function + * R6 - R9 - callee saved registers that in-kernel function will preserve + * R10 - read-only frame pointer to access stack + + Thus, all eBPF registers map one to one to HW registers on x86_64, aarch64, + etc, and eBPF calling convention maps directly to ABIs used by the kernel on + 64-bit architectures. + + On 32-bit architectures JIT may map programs that use only 32-bit arithmetic + and may let more complex programs to be interpreted. + + R0 - R5 are scratch registers and eBPF program needs spill/fill them if + necessary across calls. Note that there is only one eBPF program (== one + eBPF main routine) and it cannot call other eBPF functions, it can only + call predefined in-kernel functions, though. + +- Register width increases from 32-bit to 64-bit: + + Still, the semantics of the original 32-bit ALU operations are preserved + via 32-bit subregisters. All eBPF registers are 64-bit with 32-bit lower + subregisters that zero-extend into 64-bit if they are being written to. + That behavior maps directly to x86_64 and arm64 subregister definition, but + makes other JITs more difficult. + + 32-bit architectures run 64-bit internal BPF programs via interpreter. + Their JITs may convert BPF programs that only use 32-bit subregisters into + native instruction set and let the rest being interpreted. + + Operation is 64-bit, because on 64-bit architectures, pointers are also + 64-bit wide, and we want to pass 64-bit values in/out of kernel functions, + so 32-bit eBPF registers would otherwise require to define register-pair + ABI, thus, there won't be able to use a direct eBPF register to HW register + mapping and JIT would need to do combine/split/move operations for every + register in and out of the function, which is complex, bug prone and slow. + Another reason is the use of atomic 64-bit counters. + +- Conditional jt/jf targets replaced with jt/fall-through: + + While the original design has constructs such as ``if (cond) jump_true; + else jump_false;``, they are being replaced into alternative constructs like + ``if (cond) jump_true; /* else fall-through */``. + +- Introduces bpf_call insn and register passing convention for zero overhead + calls from/to other kernel functions: + + Before an in-kernel function call, the internal BPF program needs to + place function arguments into R1 to R5 registers to satisfy calling + convention, then the interpreter will take them from registers and pass + to in-kernel function. If R1 - R5 registers are mapped to CPU registers + that are used for argument passing on given architecture, the JIT compiler + doesn't need to emit extra moves. Function arguments will be in the correct + registers and BPF_CALL instruction will be JITed as single 'call' HW + instruction. This calling convention was picked to cover common call + situations without performance penalty. + + After an in-kernel function call, R1 - R5 are reset to unreadable and R0 has + a return value of the function. Since R6 - R9 are callee saved, their state + is preserved across the call. + + For example, consider three C functions:: + + u64 f1() { return (*_f2)(1); } + u64 f2(u64 a) { return f3(a + 1, a); } + u64 f3(u64 a, u64 b) { return a - b; } + + GCC can compile f1, f3 into x86_64:: + + f1: + movl $1, %edi + movq _f2(%rip), %rax + jmp *%rax + f3: + movq %rdi, %rax + subq %rsi, %rax + ret + + Function f2 in eBPF may look like:: + + f2: + bpf_mov R2, R1 + bpf_add R1, 1 + bpf_call f3 + bpf_exit + + If f2 is JITed and the pointer stored to ``_f2``. The calls f1 -> f2 -> f3 and + returns will be seamless. Without JIT, __bpf_prog_run() interpreter needs to + be used to call into f2. + + For practical reasons all eBPF programs have only one argument 'ctx' which is + already placed into R1 (e.g. on __bpf_prog_run() startup) and the programs + can call kernel functions with up to 5 arguments. Calls with 6 or more arguments + are currently not supported, but these restrictions can be lifted if necessary + in the future. + + On 64-bit architectures all register map to HW registers one to one. For + example, x86_64 JIT compiler can map them as ... + + :: + + R0 - rax + R1 - rdi + R2 - rsi + R3 - rdx + R4 - rcx + R5 - r8 + R6 - rbx + R7 - r13 + R8 - r14 + R9 - r15 + R10 - rbp + + ... since x86_64 ABI mandates rdi, rsi, rdx, rcx, r8, r9 for argument passing + and rbx, r12 - r15 are callee saved. + + Then the following internal BPF pseudo-program:: + + bpf_mov R6, R1 /* save ctx */ + bpf_mov R2, 2 + bpf_mov R3, 3 + bpf_mov R4, 4 + bpf_mov R5, 5 + bpf_call foo + bpf_mov R7, R0 /* save foo() return value */ + bpf_mov R1, R6 /* restore ctx for next call */ + bpf_mov R2, 6 + bpf_mov R3, 7 + bpf_mov R4, 8 + bpf_mov R5, 9 + bpf_call bar + bpf_add R0, R7 + bpf_exit + + After JIT to x86_64 may look like:: + + push %rbp + mov %rsp,%rbp + sub $0x228,%rsp + mov %rbx,-0x228(%rbp) + mov %r13,-0x220(%rbp) + mov %rdi,%rbx + mov $0x2,%esi + mov $0x3,%edx + mov $0x4,%ecx + mov $0x5,%r8d + callq foo + mov %rax,%r13 + mov %rbx,%rdi + mov $0x6,%esi + mov $0x7,%edx + mov $0x8,%ecx + mov $0x9,%r8d + callq bar + add %r13,%rax + mov -0x228(%rbp),%rbx + mov -0x220(%rbp),%r13 + leaveq + retq + + Which is in this example equivalent in C to:: + + u64 bpf_filter(u64 ctx) + { + return foo(ctx, 2, 3, 4, 5) + bar(ctx, 6, 7, 8, 9); + } + + In-kernel functions foo() and bar() with prototype: u64 (*)(u64 arg1, u64 + arg2, u64 arg3, u64 arg4, u64 arg5); will receive arguments in proper + registers and place their return value into ``%rax`` which is R0 in eBPF. + Prologue and epilogue are emitted by JIT and are implicit in the + interpreter. R0-R5 are scratch registers, so eBPF program needs to preserve + them across the calls as defined by calling convention. + + For example the following program is invalid:: + + bpf_mov R1, 1 + bpf_call foo + bpf_mov R0, R1 + bpf_exit + + After the call the registers R1-R5 contain junk values and cannot be read. + An in-kernel eBPF verifier is used to validate internal BPF programs. + +Also in the new design, eBPF is limited to 4096 insns, which means that any +program will terminate quickly and will only call a fixed number of kernel +functions. Original BPF and the new format are two operand instructions, +which helps to do one-to-one mapping between eBPF insn and x86 insn during JIT. + +The input context pointer for invoking the interpreter function is generic, +its content is defined by a specific use case. For seccomp register R1 points +to seccomp_data, for converted BPF filters R1 points to a skb. + +A program, that is translated internally consists of the following elements:: + + op:16, jt:8, jf:8, k:32 ==> op:8, dst_reg:4, src_reg:4, off:16, imm:32 + +So far 87 internal BPF instructions were implemented. 8-bit 'op' opcode field +has room for new instructions. Some of them may use 16/24/32 byte encoding. New +instructions must be multiple of 8 bytes to preserve backward compatibility. + +Internal BPF is a general purpose RISC instruction set. Not every register and +every instruction are used during translation from original BPF to new format. +For example, socket filters are not using ``exclusive add`` instruction, but +tracing filters may do to maintain counters of events, for example. Register R9 +is not used by socket filters either, but more complex filters may be running +out of registers and would have to resort to spill/fill to stack. + +Internal BPF can be used as a generic assembler for last step performance +optimizations, socket filters and seccomp are using it as assembler. Tracing +filters may use it as assembler to generate code from kernel. In kernel usage +may not be bounded by security considerations, since generated internal BPF code +may be optimizing internal code path and not being exposed to the user space. +Safety of internal BPF can come from a verifier (TBD). In such use cases as +described, it may be used as safe instruction set. + +Just like the original BPF, the new format runs within a controlled environment, +is deterministic and the kernel can easily prove that. The safety of the program +can be determined in two steps: first step does depth-first-search to disallow +loops and other CFG validation; second step starts from the first insn and +descends all possible paths. It simulates execution of every insn and observes +the state change of registers and stack. + +eBPF opcode encoding +-------------------- + +eBPF is reusing most of the opcode encoding from classic to simplify conversion +of classic BPF to eBPF. For arithmetic and jump instructions the 8-bit 'code' +field is divided into three parts:: + + +----------------+--------+--------------------+ + | 4 bits | 1 bit | 3 bits | + | operation code | source | instruction class | + +----------------+--------+--------------------+ + (MSB) (LSB) + +Three LSB bits store instruction class which is one of: + + =================== =============== + Classic BPF classes eBPF classes + =================== =============== + BPF_LD 0x00 BPF_LD 0x00 + BPF_LDX 0x01 BPF_LDX 0x01 + BPF_ST 0x02 BPF_ST 0x02 + BPF_STX 0x03 BPF_STX 0x03 + BPF_ALU 0x04 BPF_ALU 0x04 + BPF_JMP 0x05 BPF_JMP 0x05 + BPF_RET 0x06 BPF_JMP32 0x06 + BPF_MISC 0x07 BPF_ALU64 0x07 + =================== =============== + +When BPF_CLASS(code) == BPF_ALU or BPF_JMP, 4th bit encodes source operand ... + + :: + + BPF_K 0x00 + BPF_X 0x08 + + * in classic BPF, this means:: + + BPF_SRC(code) == BPF_X - use register X as source operand + BPF_SRC(code) == BPF_K - use 32-bit immediate as source operand + + * in eBPF, this means:: + + BPF_SRC(code) == BPF_X - use 'src_reg' register as source operand + BPF_SRC(code) == BPF_K - use 32-bit immediate as source operand + +... and four MSB bits store operation code. + +If BPF_CLASS(code) == BPF_ALU or BPF_ALU64 [ in eBPF ], BPF_OP(code) is one of:: + + BPF_ADD 0x00 + BPF_SUB 0x10 + BPF_MUL 0x20 + BPF_DIV 0x30 + BPF_OR 0x40 + BPF_AND 0x50 + BPF_LSH 0x60 + BPF_RSH 0x70 + BPF_NEG 0x80 + BPF_MOD 0x90 + BPF_XOR 0xa0 + BPF_MOV 0xb0 /* eBPF only: mov reg to reg */ + BPF_ARSH 0xc0 /* eBPF only: sign extending shift right */ + BPF_END 0xd0 /* eBPF only: endianness conversion */ + +If BPF_CLASS(code) == BPF_JMP or BPF_JMP32 [ in eBPF ], BPF_OP(code) is one of:: + + BPF_JA 0x00 /* BPF_JMP only */ + BPF_JEQ 0x10 + BPF_JGT 0x20 + BPF_JGE 0x30 + BPF_JSET 0x40 + BPF_JNE 0x50 /* eBPF only: jump != */ + BPF_JSGT 0x60 /* eBPF only: signed '>' */ + BPF_JSGE 0x70 /* eBPF only: signed '>=' */ + BPF_CALL 0x80 /* eBPF BPF_JMP only: function call */ + BPF_EXIT 0x90 /* eBPF BPF_JMP only: function return */ + BPF_JLT 0xa0 /* eBPF only: unsigned '<' */ + BPF_JLE 0xb0 /* eBPF only: unsigned '<=' */ + BPF_JSLT 0xc0 /* eBPF only: signed '<' */ + BPF_JSLE 0xd0 /* eBPF only: signed '<=' */ + +So BPF_ADD | BPF_X | BPF_ALU means 32-bit addition in both classic BPF +and eBPF. There are only two registers in classic BPF, so it means A += X. +In eBPF it means dst_reg = (u32) dst_reg + (u32) src_reg; similarly, +BPF_XOR | BPF_K | BPF_ALU means A ^= imm32 in classic BPF and analogous +src_reg = (u32) src_reg ^ (u32) imm32 in eBPF. + +Classic BPF is using BPF_MISC class to represent A = X and X = A moves. +eBPF is using BPF_MOV | BPF_X | BPF_ALU code instead. Since there are no +BPF_MISC operations in eBPF, the class 7 is used as BPF_ALU64 to mean +exactly the same operations as BPF_ALU, but with 64-bit wide operands +instead. So BPF_ADD | BPF_X | BPF_ALU64 means 64-bit addition, i.e.: +dst_reg = dst_reg + src_reg + +Classic BPF wastes the whole BPF_RET class to represent a single ``ret`` +operation. Classic BPF_RET | BPF_K means copy imm32 into return register +and perform function exit. eBPF is modeled to match CPU, so BPF_JMP | BPF_EXIT +in eBPF means function exit only. The eBPF program needs to store return +value into register R0 before doing a BPF_EXIT. Class 6 in eBPF is used as +BPF_JMP32 to mean exactly the same operations as BPF_JMP, but with 32-bit wide +operands for the comparisons instead. + +For load and store instructions the 8-bit 'code' field is divided as:: + + +--------+--------+-------------------+ + | 3 bits | 2 bits | 3 bits | + | mode | size | instruction class | + +--------+--------+-------------------+ + (MSB) (LSB) + +Size modifier is one of ... + +:: + + BPF_W 0x00 /* word */ + BPF_H 0x08 /* half word */ + BPF_B 0x10 /* byte */ + BPF_DW 0x18 /* eBPF only, double word */ + +... which encodes size of load/store operation:: + + B - 1 byte + H - 2 byte + W - 4 byte + DW - 8 byte (eBPF only) + +Mode modifier is one of:: + + BPF_IMM 0x00 /* used for 32-bit mov in classic BPF and 64-bit in eBPF */ + BPF_ABS 0x20 + BPF_IND 0x40 + BPF_MEM 0x60 + BPF_LEN 0x80 /* classic BPF only, reserved in eBPF */ + BPF_MSH 0xa0 /* classic BPF only, reserved in eBPF */ + BPF_XADD 0xc0 /* eBPF only, exclusive add */ + +eBPF has two non-generic instructions: (BPF_ABS | <size> | BPF_LD) and +(BPF_IND | <size> | BPF_LD) which are used to access packet data. + +They had to be carried over from classic to have strong performance of +socket filters running in eBPF interpreter. These instructions can only +be used when interpreter context is a pointer to ``struct sk_buff`` and +have seven implicit operands. Register R6 is an implicit input that must +contain pointer to sk_buff. Register R0 is an implicit output which contains +the data fetched from the packet. Registers R1-R5 are scratch registers +and must not be used to store the data across BPF_ABS | BPF_LD or +BPF_IND | BPF_LD instructions. + +These instructions have implicit program exit condition as well. When +eBPF program is trying to access the data beyond the packet boundary, +the interpreter will abort the execution of the program. JIT compilers +therefore must preserve this property. src_reg and imm32 fields are +explicit inputs to these instructions. + +For example:: + + BPF_IND | BPF_W | BPF_LD means: + + R0 = ntohl(*(u32 *) (((struct sk_buff *) R6)->data + src_reg + imm32)) + and R1 - R5 were scratched. + +Unlike classic BPF instruction set, eBPF has generic load/store operations:: + + BPF_MEM | <size> | BPF_STX: *(size *) (dst_reg + off) = src_reg + BPF_MEM | <size> | BPF_ST: *(size *) (dst_reg + off) = imm32 + BPF_MEM | <size> | BPF_LDX: dst_reg = *(size *) (src_reg + off) + BPF_XADD | BPF_W | BPF_STX: lock xadd *(u32 *)(dst_reg + off16) += src_reg + BPF_XADD | BPF_DW | BPF_STX: lock xadd *(u64 *)(dst_reg + off16) += src_reg + +Where size is one of: BPF_B or BPF_H or BPF_W or BPF_DW. Note that 1 and +2 byte atomic increments are not supported. + +eBPF has one 16-byte instruction: BPF_LD | BPF_DW | BPF_IMM which consists +of two consecutive ``struct bpf_insn`` 8-byte blocks and interpreted as single +instruction that loads 64-bit immediate value into a dst_reg. +Classic BPF has similar instruction: BPF_LD | BPF_W | BPF_IMM which loads +32-bit immediate value into a register. + +eBPF verifier +------------- +The safety of the eBPF program is determined in two steps. + +First step does DAG check to disallow loops and other CFG validation. +In particular it will detect programs that have unreachable instructions. +(though classic BPF checker allows them) + +Second step starts from the first insn and descends all possible paths. +It simulates execution of every insn and observes the state change of +registers and stack. + +At the start of the program the register R1 contains a pointer to context +and has type PTR_TO_CTX. +If verifier sees an insn that does R2=R1, then R2 has now type +PTR_TO_CTX as well and can be used on the right hand side of expression. +If R1=PTR_TO_CTX and insn is R2=R1+R1, then R2=SCALAR_VALUE, +since addition of two valid pointers makes invalid pointer. +(In 'secure' mode verifier will reject any type of pointer arithmetic to make +sure that kernel addresses don't leak to unprivileged users) + +If register was never written to, it's not readable:: + + bpf_mov R0 = R2 + bpf_exit + +will be rejected, since R2 is unreadable at the start of the program. + +After kernel function call, R1-R5 are reset to unreadable and +R0 has a return type of the function. + +Since R6-R9 are callee saved, their state is preserved across the call. + +:: + + bpf_mov R6 = 1 + bpf_call foo + bpf_mov R0 = R6 + bpf_exit + +is a correct program. If there was R1 instead of R6, it would have +been rejected. + +load/store instructions are allowed only with registers of valid types, which +are PTR_TO_CTX, PTR_TO_MAP, PTR_TO_STACK. They are bounds and alignment checked. +For example:: + + bpf_mov R1 = 1 + bpf_mov R2 = 2 + bpf_xadd *(u32 *)(R1 + 3) += R2 + bpf_exit + +will be rejected, since R1 doesn't have a valid pointer type at the time of +execution of instruction bpf_xadd. + +At the start R1 type is PTR_TO_CTX (a pointer to generic ``struct bpf_context``) +A callback is used to customize verifier to restrict eBPF program access to only +certain fields within ctx structure with specified size and alignment. + +For example, the following insn:: + + bpf_ld R0 = *(u32 *)(R6 + 8) + +intends to load a word from address R6 + 8 and store it into R0 +If R6=PTR_TO_CTX, via is_valid_access() callback the verifier will know +that offset 8 of size 4 bytes can be accessed for reading, otherwise +the verifier will reject the program. +If R6=PTR_TO_STACK, then access should be aligned and be within +stack bounds, which are [-MAX_BPF_STACK, 0). In this example offset is 8, +so it will fail verification, since it's out of bounds. + +The verifier will allow eBPF program to read data from stack only after +it wrote into it. + +Classic BPF verifier does similar check with M[0-15] memory slots. +For example:: + + bpf_ld R0 = *(u32 *)(R10 - 4) + bpf_exit + +is invalid program. +Though R10 is correct read-only register and has type PTR_TO_STACK +and R10 - 4 is within stack bounds, there were no stores into that location. + +Pointer register spill/fill is tracked as well, since four (R6-R9) +callee saved registers may not be enough for some programs. + +Allowed function calls are customized with bpf_verifier_ops->get_func_proto() +The eBPF verifier will check that registers match argument constraints. +After the call register R0 will be set to return type of the function. + +Function calls is a main mechanism to extend functionality of eBPF programs. +Socket filters may let programs to call one set of functions, whereas tracing +filters may allow completely different set. + +If a function made accessible to eBPF program, it needs to be thought through +from safety point of view. The verifier will guarantee that the function is +called with valid arguments. + +seccomp vs socket filters have different security restrictions for classic BPF. +Seccomp solves this by two stage verifier: classic BPF verifier is followed +by seccomp verifier. In case of eBPF one configurable verifier is shared for +all use cases. + +See details of eBPF verifier in kernel/bpf/verifier.c + +Register value tracking +----------------------- +In order to determine the safety of an eBPF program, the verifier must track +the range of possible values in each register and also in each stack slot. +This is done with ``struct bpf_reg_state``, defined in include/linux/ +bpf_verifier.h, which unifies tracking of scalar and pointer values. Each +register state has a type, which is either NOT_INIT (the register has not been +written to), SCALAR_VALUE (some value which is not usable as a pointer), or a +pointer type. The types of pointers describe their base, as follows: + + + PTR_TO_CTX + Pointer to bpf_context. + CONST_PTR_TO_MAP + Pointer to struct bpf_map. "Const" because arithmetic + on these pointers is forbidden. + PTR_TO_MAP_VALUE + Pointer to the value stored in a map element. + PTR_TO_MAP_VALUE_OR_NULL + Either a pointer to a map value, or NULL; map accesses + (see section 'eBPF maps', below) return this type, + which becomes a PTR_TO_MAP_VALUE when checked != NULL. + Arithmetic on these pointers is forbidden. + PTR_TO_STACK + Frame pointer. + PTR_TO_PACKET + skb->data. + PTR_TO_PACKET_END + skb->data + headlen; arithmetic forbidden. + PTR_TO_SOCKET + Pointer to struct bpf_sock_ops, implicitly refcounted. + PTR_TO_SOCKET_OR_NULL + Either a pointer to a socket, or NULL; socket lookup + returns this type, which becomes a PTR_TO_SOCKET when + checked != NULL. PTR_TO_SOCKET is reference-counted, + so programs must release the reference through the + socket release function before the end of the program. + Arithmetic on these pointers is forbidden. + +However, a pointer may be offset from this base (as a result of pointer +arithmetic), and this is tracked in two parts: the 'fixed offset' and 'variable +offset'. The former is used when an exactly-known value (e.g. an immediate +operand) is added to a pointer, while the latter is used for values which are +not exactly known. The variable offset is also used in SCALAR_VALUEs, to track +the range of possible values in the register. + +The verifier's knowledge about the variable offset consists of: + +* minimum and maximum values as unsigned +* minimum and maximum values as signed + +* knowledge of the values of individual bits, in the form of a 'tnum': a u64 + 'mask' and a u64 'value'. 1s in the mask represent bits whose value is unknown; + 1s in the value represent bits known to be 1. Bits known to be 0 have 0 in both + mask and value; no bit should ever be 1 in both. For example, if a byte is read + into a register from memory, the register's top 56 bits are known zero, while + the low 8 are unknown - which is represented as the tnum (0x0; 0xff). If we + then OR this with 0x40, we get (0x40; 0xbf), then if we add 1 we get (0x0; + 0x1ff), because of potential carries. + +Besides arithmetic, the register state can also be updated by conditional +branches. For instance, if a SCALAR_VALUE is compared > 8, in the 'true' branch +it will have a umin_value (unsigned minimum value) of 9, whereas in the 'false' +branch it will have a umax_value of 8. A signed compare (with BPF_JSGT or +BPF_JSGE) would instead update the signed minimum/maximum values. Information +from the signed and unsigned bounds can be combined; for instance if a value is +first tested < 8 and then tested s> 4, the verifier will conclude that the value +is also > 4 and s< 8, since the bounds prevent crossing the sign boundary. + +PTR_TO_PACKETs with a variable offset part have an 'id', which is common to all +pointers sharing that same variable offset. This is important for packet range +checks: after adding a variable to a packet pointer register A, if you then copy +it to another register B and then add a constant 4 to A, both registers will +share the same 'id' but the A will have a fixed offset of +4. Then if A is +bounds-checked and found to be less than a PTR_TO_PACKET_END, the register B is +now known to have a safe range of at least 4 bytes. See 'Direct packet access', +below, for more on PTR_TO_PACKET ranges. + +The 'id' field is also used on PTR_TO_MAP_VALUE_OR_NULL, common to all copies of +the pointer returned from a map lookup. This means that when one copy is +checked and found to be non-NULL, all copies can become PTR_TO_MAP_VALUEs. +As well as range-checking, the tracked information is also used for enforcing +alignment of pointer accesses. For instance, on most systems the packet pointer +is 2 bytes after a 4-byte alignment. If a program adds 14 bytes to that to jump +over the Ethernet header, then reads IHL and addes (IHL * 4), the resulting +pointer will have a variable offset known to be 4n+2 for some n, so adding the 2 +bytes (NET_IP_ALIGN) gives a 4-byte alignment and so word-sized accesses through +that pointer are safe. +The 'id' field is also used on PTR_TO_SOCKET and PTR_TO_SOCKET_OR_NULL, common +to all copies of the pointer returned from a socket lookup. This has similar +behaviour to the handling for PTR_TO_MAP_VALUE_OR_NULL->PTR_TO_MAP_VALUE, but +it also handles reference tracking for the pointer. PTR_TO_SOCKET implicitly +represents a reference to the corresponding ``struct sock``. To ensure that the +reference is not leaked, it is imperative to NULL-check the reference and in +the non-NULL case, and pass the valid reference to the socket release function. + +Direct packet access +-------------------- +In cls_bpf and act_bpf programs the verifier allows direct access to the packet +data via skb->data and skb->data_end pointers. +Ex:: + + 1: r4 = *(u32 *)(r1 +80) /* load skb->data_end */ + 2: r3 = *(u32 *)(r1 +76) /* load skb->data */ + 3: r5 = r3 + 4: r5 += 14 + 5: if r5 > r4 goto pc+16 + R1=ctx R3=pkt(id=0,off=0,r=14) R4=pkt_end R5=pkt(id=0,off=14,r=14) R10=fp + 6: r0 = *(u16 *)(r3 +12) /* access 12 and 13 bytes of the packet */ + +this 2byte load from the packet is safe to do, since the program author +did check ``if (skb->data + 14 > skb->data_end) goto err`` at insn #5 which +means that in the fall-through case the register R3 (which points to skb->data) +has at least 14 directly accessible bytes. The verifier marks it +as R3=pkt(id=0,off=0,r=14). +id=0 means that no additional variables were added to the register. +off=0 means that no additional constants were added. +r=14 is the range of safe access which means that bytes [R3, R3 + 14) are ok. +Note that R5 is marked as R5=pkt(id=0,off=14,r=14). It also points +to the packet data, but constant 14 was added to the register, so +it now points to ``skb->data + 14`` and accessible range is [R5, R5 + 14 - 14) +which is zero bytes. + +More complex packet access may look like:: + + + R0=inv1 R1=ctx R3=pkt(id=0,off=0,r=14) R4=pkt_end R5=pkt(id=0,off=14,r=14) R10=fp + 6: r0 = *(u8 *)(r3 +7) /* load 7th byte from the packet */ + 7: r4 = *(u8 *)(r3 +12) + 8: r4 *= 14 + 9: r3 = *(u32 *)(r1 +76) /* load skb->data */ + 10: r3 += r4 + 11: r2 = r1 + 12: r2 <<= 48 + 13: r2 >>= 48 + 14: r3 += r2 + 15: r2 = r3 + 16: r2 += 8 + 17: r1 = *(u32 *)(r1 +80) /* load skb->data_end */ + 18: if r2 > r1 goto pc+2 + R0=inv(id=0,umax_value=255,var_off=(0x0; 0xff)) R1=pkt_end R2=pkt(id=2,off=8,r=8) R3=pkt(id=2,off=0,r=8) R4=inv(id=0,umax_value=3570,var_off=(0x0; 0xfffe)) R5=pkt(id=0,off=14,r=14) R10=fp + 19: r1 = *(u8 *)(r3 +4) + +The state of the register R3 is R3=pkt(id=2,off=0,r=8) +id=2 means that two ``r3 += rX`` instructions were seen, so r3 points to some +offset within a packet and since the program author did +``if (r3 + 8 > r1) goto err`` at insn #18, the safe range is [R3, R3 + 8). +The verifier only allows 'add'/'sub' operations on packet registers. Any other +operation will set the register state to 'SCALAR_VALUE' and it won't be +available for direct packet access. + +Operation ``r3 += rX`` may overflow and become less than original skb->data, +therefore the verifier has to prevent that. So when it sees ``r3 += rX`` +instruction and rX is more than 16-bit value, any subsequent bounds-check of r3 +against skb->data_end will not give us 'range' information, so attempts to read +through the pointer will give "invalid access to packet" error. + +Ex. after insn ``r4 = *(u8 *)(r3 +12)`` (insn #7 above) the state of r4 is +R4=inv(id=0,umax_value=255,var_off=(0x0; 0xff)) which means that upper 56 bits +of the register are guaranteed to be zero, and nothing is known about the lower +8 bits. After insn ``r4 *= 14`` the state becomes +R4=inv(id=0,umax_value=3570,var_off=(0x0; 0xfffe)), since multiplying an 8-bit +value by constant 14 will keep upper 52 bits as zero, also the least significant +bit will be zero as 14 is even. Similarly ``r2 >>= 48`` will make +R2=inv(id=0,umax_value=65535,var_off=(0x0; 0xffff)), since the shift is not sign +extending. This logic is implemented in adjust_reg_min_max_vals() function, +which calls adjust_ptr_min_max_vals() for adding pointer to scalar (or vice +versa) and adjust_scalar_min_max_vals() for operations on two scalars. + +The end result is that bpf program author can access packet directly +using normal C code as:: + + void *data = (void *)(long)skb->data; + void *data_end = (void *)(long)skb->data_end; + struct eth_hdr *eth = data; + struct iphdr *iph = data + sizeof(*eth); + struct udphdr *udp = data + sizeof(*eth) + sizeof(*iph); + + if (data + sizeof(*eth) + sizeof(*iph) + sizeof(*udp) > data_end) + return 0; + if (eth->h_proto != htons(ETH_P_IP)) + return 0; + if (iph->protocol != IPPROTO_UDP || iph->ihl != 5) + return 0; + if (udp->dest == 53 || udp->source == 9) + ...; + +which makes such programs easier to write comparing to LD_ABS insn +and significantly faster. + +eBPF maps +--------- +'maps' is a generic storage of different types for sharing data between kernel +and userspace. + +The maps are accessed from user space via BPF syscall, which has commands: + +- create a map with given type and attributes + ``map_fd = bpf(BPF_MAP_CREATE, union bpf_attr *attr, u32 size)`` + using attr->map_type, attr->key_size, attr->value_size, attr->max_entries + returns process-local file descriptor or negative error + +- lookup key in a given map + ``err = bpf(BPF_MAP_LOOKUP_ELEM, union bpf_attr *attr, u32 size)`` + using attr->map_fd, attr->key, attr->value + returns zero and stores found elem into value or negative error + +- create or update key/value pair in a given map + ``err = bpf(BPF_MAP_UPDATE_ELEM, union bpf_attr *attr, u32 size)`` + using attr->map_fd, attr->key, attr->value + returns zero or negative error + +- find and delete element by key in a given map + ``err = bpf(BPF_MAP_DELETE_ELEM, union bpf_attr *attr, u32 size)`` + using attr->map_fd, attr->key + +- to delete map: close(fd) + Exiting process will delete maps automatically + +userspace programs use this syscall to create/access maps that eBPF programs +are concurrently updating. + +maps can have different types: hash, array, bloom filter, radix-tree, etc. + +The map is defined by: + + - type + - max number of elements + - key size in bytes + - value size in bytes + +Pruning +------- +The verifier does not actually walk all possible paths through the program. For +each new branch to analyse, the verifier looks at all the states it's previously +been in when at this instruction. If any of them contain the current state as a +subset, the branch is 'pruned' - that is, the fact that the previous state was +accepted implies the current state would be as well. For instance, if in the +previous state, r1 held a packet-pointer, and in the current state, r1 holds a +packet-pointer with a range as long or longer and at least as strict an +alignment, then r1 is safe. Similarly, if r2 was NOT_INIT before then it can't +have been used by any path from that point, so any value in r2 (including +another NOT_INIT) is safe. The implementation is in the function regsafe(). +Pruning considers not only the registers but also the stack (and any spilled +registers it may hold). They must all be safe for the branch to be pruned. +This is implemented in states_equal(). + +Understanding eBPF verifier messages +------------------------------------ + +The following are few examples of invalid eBPF programs and verifier error +messages as seen in the log: + +Program with unreachable instructions:: + + static struct bpf_insn prog[] = { + BPF_EXIT_INSN(), + BPF_EXIT_INSN(), + }; + +Error: + + unreachable insn 1 + +Program that reads uninitialized register:: + + BPF_MOV64_REG(BPF_REG_0, BPF_REG_2), + BPF_EXIT_INSN(), + +Error:: + + 0: (bf) r0 = r2 + R2 !read_ok + +Program that doesn't initialize R0 before exiting:: + + BPF_MOV64_REG(BPF_REG_2, BPF_REG_1), + BPF_EXIT_INSN(), + +Error:: + + 0: (bf) r2 = r1 + 1: (95) exit + R0 !read_ok + +Program that accesses stack out of bounds:: + + BPF_ST_MEM(BPF_DW, BPF_REG_10, 8, 0), + BPF_EXIT_INSN(), + +Error:: + + 0: (7a) *(u64 *)(r10 +8) = 0 + invalid stack off=8 size=8 + +Program that doesn't initialize stack before passing its address into function:: + + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_EXIT_INSN(), + +Error:: + + 0: (bf) r2 = r10 + 1: (07) r2 += -8 + 2: (b7) r1 = 0x0 + 3: (85) call 1 + invalid indirect read from stack off -8+0 size 8 + +Program that uses invalid map_fd=0 while calling to map_lookup_elem() function:: + + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_EXIT_INSN(), + +Error:: + + 0: (7a) *(u64 *)(r10 -8) = 0 + 1: (bf) r2 = r10 + 2: (07) r2 += -8 + 3: (b7) r1 = 0x0 + 4: (85) call 1 + fd 0 is not pointing to valid bpf_map + +Program that doesn't check return value of map_lookup_elem() before accessing +map element:: + + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_ST_MEM(BPF_DW, BPF_REG_0, 0, 0), + BPF_EXIT_INSN(), + +Error:: + + 0: (7a) *(u64 *)(r10 -8) = 0 + 1: (bf) r2 = r10 + 2: (07) r2 += -8 + 3: (b7) r1 = 0x0 + 4: (85) call 1 + 5: (7a) *(u64 *)(r0 +0) = 0 + R0 invalid mem access 'map_value_or_null' + +Program that correctly checks map_lookup_elem() returned value for NULL, but +accesses the memory with incorrect alignment:: + + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 1), + BPF_ST_MEM(BPF_DW, BPF_REG_0, 4, 0), + BPF_EXIT_INSN(), + +Error:: + + 0: (7a) *(u64 *)(r10 -8) = 0 + 1: (bf) r2 = r10 + 2: (07) r2 += -8 + 3: (b7) r1 = 1 + 4: (85) call 1 + 5: (15) if r0 == 0x0 goto pc+1 + R0=map_ptr R10=fp + 6: (7a) *(u64 *)(r0 +4) = 0 + misaligned access off 4 size 8 + +Program that correctly checks map_lookup_elem() returned value for NULL and +accesses memory with correct alignment in one side of 'if' branch, but fails +to do so in the other side of 'if' branch:: + + BPF_ST_MEM(BPF_DW, BPF_REG_10, -8, 0), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_LD_MAP_FD(BPF_REG_1, 0), + BPF_RAW_INSN(BPF_JMP | BPF_CALL, 0, 0, 0, BPF_FUNC_map_lookup_elem), + BPF_JMP_IMM(BPF_JEQ, BPF_REG_0, 0, 2), + BPF_ST_MEM(BPF_DW, BPF_REG_0, 0, 0), + BPF_EXIT_INSN(), + BPF_ST_MEM(BPF_DW, BPF_REG_0, 0, 1), + BPF_EXIT_INSN(), + +Error:: + + 0: (7a) *(u64 *)(r10 -8) = 0 + 1: (bf) r2 = r10 + 2: (07) r2 += -8 + 3: (b7) r1 = 1 + 4: (85) call 1 + 5: (15) if r0 == 0x0 goto pc+2 + R0=map_ptr R10=fp + 6: (7a) *(u64 *)(r0 +0) = 0 + 7: (95) exit + + from 5 to 8: R0=imm0 R10=fp + 8: (7a) *(u64 *)(r0 +0) = 1 + R0 invalid mem access 'imm' + +Program that performs a socket lookup then sets the pointer to NULL without +checking it:: + + BPF_MOV64_IMM(BPF_REG_2, 0), + BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_2, -8), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_MOV64_IMM(BPF_REG_3, 4), + BPF_MOV64_IMM(BPF_REG_4, 0), + BPF_MOV64_IMM(BPF_REG_5, 0), + BPF_EMIT_CALL(BPF_FUNC_sk_lookup_tcp), + BPF_MOV64_IMM(BPF_REG_0, 0), + BPF_EXIT_INSN(), + +Error:: + + 0: (b7) r2 = 0 + 1: (63) *(u32 *)(r10 -8) = r2 + 2: (bf) r2 = r10 + 3: (07) r2 += -8 + 4: (b7) r3 = 4 + 5: (b7) r4 = 0 + 6: (b7) r5 = 0 + 7: (85) call bpf_sk_lookup_tcp#65 + 8: (b7) r0 = 0 + 9: (95) exit + Unreleased reference id=1, alloc_insn=7 + +Program that performs a socket lookup but does not NULL-check the returned +value:: + + BPF_MOV64_IMM(BPF_REG_2, 0), + BPF_STX_MEM(BPF_W, BPF_REG_10, BPF_REG_2, -8), + BPF_MOV64_REG(BPF_REG_2, BPF_REG_10), + BPF_ALU64_IMM(BPF_ADD, BPF_REG_2, -8), + BPF_MOV64_IMM(BPF_REG_3, 4), + BPF_MOV64_IMM(BPF_REG_4, 0), + BPF_MOV64_IMM(BPF_REG_5, 0), + BPF_EMIT_CALL(BPF_FUNC_sk_lookup_tcp), + BPF_EXIT_INSN(), + +Error:: + + 0: (b7) r2 = 0 + 1: (63) *(u32 *)(r10 -8) = r2 + 2: (bf) r2 = r10 + 3: (07) r2 += -8 + 4: (b7) r3 = 4 + 5: (b7) r4 = 0 + 6: (b7) r5 = 0 + 7: (85) call bpf_sk_lookup_tcp#65 + 8: (95) exit + Unreleased reference id=1, alloc_insn=7 + +Testing +------- + +Next to the BPF toolchain, the kernel also ships a test module that contains +various test cases for classic and internal BPF that can be executed against +the BPF interpreter and JIT compiler. It can be found in lib/test_bpf.c and +enabled via Kconfig:: + + CONFIG_TEST_BPF=m + +After the module has been built and installed, the test suite can be executed +via insmod or modprobe against 'test_bpf' module. Results of the test cases +including timings in nsec can be found in the kernel log (dmesg). + +Misc +---- + +Also trinity, the Linux syscall fuzzer, has built-in support for BPF and +SECCOMP-BPF kernel fuzzing. + +Written by +---------- + +The document was written in the hope that it is found useful and in order +to give potential BPF hackers or security auditors a better overview of +the underlying architecture. + +- Jay Schulist <jschlst@samba.org> +- Daniel Borkmann <daniel@iogearbox.net> +- Alexei Starovoitov <ast@kernel.org> |